|
General | Implementation Request | Defer | Critical | RISC-V (riscv64) porting + multilib support | Closed | |
Task Description
The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .
Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.
For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.
Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.
NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .
|
|
General | Implementation Request | Defer | Medium | ARM/POWER porting | Closed | |
Task Description
In particular, I would like to see the a20 arm processor supported and also, the talos 2 desktop supported. (powerpc)
The a20 is important because it will be supported by this: https://www.crowdsupply.com/eoma68/micro-desktop
I would really love to have buy this and see it supported by Hyperbola. :)
Within a year if you can support that, I would be extremely, extremely pleased.
as for the powerpc one, I don’t really plan on getting it, but I know that some people may, and I think that it would be good for them to be able to move onto hyperbola. The first is more important to me though.
By either December or next January, is when I would probably want it to be supported. :)
Also, ath9k usb wifi cards would need to be supported for this though... just to warn you.
I already am donating to you guys though through liberapay, please make this happen in the future. ;)
|
|
Iceweasel-UXP | Implementation Request | Defer | Low | Swiftweasel-UXP theme for Iceweasel-UXP | Closed | |
Task Description
Description: Historically, Swiftweasel was a Firefox-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.
Since there are users encouraging us develop a Palemoon-based application , and Swiftweasel contains non-trademarked graphics and logos, we could port Swiftweasel to UXP platform as theme for Iceweasel-UXP.
|
|
Icedove-UXP | Implementation Request | Defer | Low | Swiftdove-UXP theme for Icedove-UXP | Closed | |
Task Description
Description: Historically, Swiftdove was a Thunderbird-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.
Since FossaMail may potentially be revived on UXP in the future [0] and Swiftdove contains non-trademarked graphics and logos, we could port Swiftdove to UXP platform as theme for Icedove-UXP.
|
|
General | Bug Report | Very Low | Critical | [msmtp] needs to be recompiled with libressl | Closed | |
Task Description
I may be wrong as I did not migrate to 0.3 yet, but I think that `msmtp` has been forgotten and needs to be recompiled with `libressl`.
Please remove this report if I am wrong.
|
|
General | Bug Report | Very Low | Critical | [msmtp] needs libressl | Closed | |
Task Description
I may be wrong for I did not migrate to 0.3 as of yet, but I think that `msmtp` has been forgotten and needs to be recompiled with `libressl`.
Please remove this report if I am mistaken.
|
|
General | Bug Report | Very Low | Critical | [msmtp] needs libressl | Closed | |
Task Description
From what I can see, `msmtp` still needs to be recompiled with `libressl`. Please remove this report if I am mistaken.
|
|
Iceweasel-UXP | Security Issue | Very Low | High | Noscript continual update request, | Closed | |
Task Description
I would like it if you could, fork noscript legacy and constantly update it based on the webext one’s changes without of course, using the webext.
What I mean, is be applying the new security fixes they put into the webext one (the ones you need)
and then, apply them into iceweasel-classic’s noscript.
Even if you plan on updating it once a month, this is critical in my opinion for keeping the browser safe.
5.1.85 is the current latest legacy noscript version within noscript.net’s website.
ps, this is doable right?
We don’t want obsolete software after all.
|
|
Iceweasel-UXP | Backport Request | Very Low | Medium | Request browser add-on: New Tab Tools | Closed | |
Task Description
Name: New Tab Tools Version: 81 (compatible Firefox version 52) Source code: Github Description: Customize Firefox’s. Tabs Page
https://github.com/darktrojan/newtabtools
https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/
|
|
Icedove-UXP | Backport Request | Very Low | Medium | Ublock origin for Icedove-UXP | Closed | |
Task Description
I would like to have this package also added to icedove-uxp. It would be lovely, given that the latest legacy package of ublock origin supports legacy/thunderbird without webext of course. :)
|
|
Iceape-UXP | Update Request | Very Low | Medium | noscript for Iceape request | Closed | |
Task Description
Add version 5.1.9
Very important for iceape users to keep updated often.
|
|
Iceape-UXP | Implementation Request | Very Low | Medium | Random agent spoofer for Iceape | Closed | |
Task Description
0.9.5.8.4 version would be good to have.
|
|
Iceweasel-UXP | Update Request | Very Low | Medium | [iceweasel-uxp] changing the default search-engines | Closed | |
Task Description
Hello,
some of the current search-engines and websites used within Iceweasel-UXP per default are not reachable or even out of function. To be named are the following for now:
- Yacy - Quitter / GNUSocial-instance - Invidious-instance
It would be good to change or replace those.
|
|
Icedove-UXP | Bug Report | Very Low | Medium | CardBook addon make icedove crash wen adding or editing ... | Closed | |
Task Description
the cardbook version is 30.9 i tried with vcard 4.0 and vcard 3.0 same issue editing or creating a contact makes icedove-uxp crash!
|
|
General | Security Issue | Very Low | Medium | spacefm possible security error | Closed | |
Task Description
No root settings found in /etc/spacefm/ Setting a root editor in Preferences should remove this warning on startup. Otherwise commands run as root may present a security risk. EXEC(/usr/share/applications/sakura.desktop)=sakura
I am not sure how much of a risk this is, I will set it at high for now, but feel free to change it to low if its not a huge issue.
|
|
HyperISO | Bug Report | Very Low | Medium | 0.4 iso is massively broken... | Closed | |
Task Description
I have a picture to prove it, not sure if this only affects me, but it is annoying…
:(
Anywho, if you can fix this would be appreciated, very much!
:)
|
|
Icedove-UXP | Backport Request | Very Low | Low | Firetray extension for Icedove-UXP | Closed | |
Task Description
Please, provide the extension firetray for icedove-uxp.
https://addons.thunderbird.net/en-US/thunderbird/addon/firetray/
|
|
Iceweasel-UXP | Backport Request | Very Low | Low | Search Engine Addon Request: Startpage | Closed | |
Task Description
Icecat currently has the FSF approved addon for Startpage.com. It would be helpful to have it ported to iceweasel-uxp. https://directory.fsf.org/wiki/Startpage_HTTPS_Privacy_Search_Engine
|
|
UXP applications | Bug Report | Very Low | Low | [ice{ape,weasel}-uxp-l10n] Default bookmarks are differ ... | Closed | |
Task Description
In the library manager:
At bookmarks toolbar by default, an entry of the Hyperbola website favicon is different, affected in both localization and non-localization (origin).
At bookmarks menu by default, a folder of Hyperbola with some clearnet and onion entries appeared in non-localization (origin), but not in localization.
|
|
Iceweasel-UXP | Backport Request | Very Low | Very Low | Request browser add-on: FireGestures | Closed | |
Task Description
Name: FireGestures Version: 1.11.1 (compatible Firefox version 52) Source code: Github Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.
https://github.com/gomita/firegestures/
https://addons.mozilla.org/en-US/firefox/addon/firegestures/
|
|
Iceweasel-UXP | Backport Request | Very Low | Very Low | Request browser add-on: Vimium-FF | Closed | |
Task Description
Name: Vimium-FF Version: Newest (compatible Firefox version 52) Source code: Github Description: The Hacker’s Browser. Vimium provides keyboard shortcuts for navigation and control in the spirit of Vim.
This is a port of the popular Chrome extension to Firefox.
Most stuff works, but the port to Firefox remains a work in progress.
https://github.com/philc/vimium
https://addons.mozilla.org/en-US/firefox/addon/vimium-ff/
|
|
UXP applications | Implementation Request | Very Low | Very Low | a libre version of Navigator, | Closed | |
Task Description
http://repository.binaryoutcast.com/artifacts/navigator-builds/
http://binaryoutcast.com/projects/borealis/
unlike Navigator though, it needs two things: compatibility with seamonkey addons, (the ones that effect web browsing, not the mail email parts)
and to be based off of the latest version of seamonkey, only obviously just the navigator part. I understand this might be hard to implement now, so I can wait if need be, Just thought I would show this to you.
PS, if you ever make HyperBK, port it to that too, but until then, just the os that I mentioned.
Also, last thing, any seamonkey addons that I have already asked for seamonkey, again that aren’t email/mail based, implement them for this too. :)
I will put the severity at very low if that’s okay, just until you have actual time/whatever...
Let me know if this is even remotely possible with this build.
|
|
HyperTools | Implementation Request | Low | Low | [hypertools] create libretools replacement for Hyperbol... | Deferred | |
Task Description
Create hypertools to replace libretools package for HyperbolaBSD and GNU/Linux
It’s long period to develop this package. For now, a systemd-nspawn wrapper is being developed for “libretools”[0]
[0]:https://issues.hyperbola.info/index.php?do=details&task_id=86
|
|
General | Bug Report | Medium | Critical | [xenocara] Server is not able to be started via xdm | Closed | |
Task Description
With the newest package-update the xserver xenocara has missing dependencies towards adobe-fonts and twm.
|
|
General | Implementation Request | Medium | High | Develop GNU/HyperBK patchset | Closed | |
Task Description
Develop GNU/HyperBK patchset for toolchain (Glibc, Binutils and GCC) and packages.
PATCHING NOTE
Make sure the definitions are not simply duplicated from GNU/Linux' because that will eventually result in
out-of-sync definitions that break for us.
Example of triplet check: linux*-gnu | gnu* | hyperbk-gnu)
Example of uname check: Linux|GNU|GNU/*)
Example of C macro check: defined(__linux__) || defined(__GNU__) || defined(__GLIBC__)
[note: GNU/Hurd defines __GNU__, and GNU/HyperBK define __GLIBC__ as hardcoded macro]
Example of makefile check: ifneq (, $(filter Linux GNU GNU_%, $(shell uname -s)))
[note1: findstring matches subwords, use filter instead]
[note2: list must be the first parameter, otherwise matching fails]
[note3: "%" is make's wildcard]
|
|
chroot-nspawn | Bug Report | Medium | Medium | [chroot-nspawn] Create mount points if mountpoint exit ... | Unconfirmed | |
|
|
General | Bug Report | Medium | Medium | [bind-tools], require re-build | Closed | |
|
|
General | Feature Request | Medium | Low | [Website] Rework for the onion-page | Unconfirmed | |
|
|
General | Bug Report | High | Critical | [efivar] libefivar.so.1: cannot open shared object file | Closed | |
|
|
chroot-nspawn | Implementation Request | High | High | [chroot-nspawn] create systemd-nspawn replacement | Closed | |
|
|
General | Bug Report | High | High | [fair-viewer] Problems with running package | Closed | |
|
|
HyperBK | Implementation Request | Very High | Critical | Develop a BSD descendant kernel for HyperbolaBSD | In Progress | |
|
|
General | Implementation Request | Very High | Critical | POWER (ppc64le) porting | Closed | |
|
|
General | Implementation Request | Very High | Critical | ARM (aarch and armv7h) porting | Closed | |
|
|
General | Bug Report | Very High | Critical | [Hyperbola GNU/Linux-libre 0.4] Reworking xenocara and ... | Closed | |
|
|
General | Implementation Request | Very High | High | Port Icedove to UXP platform | Closed | |
|
|
General | Implementation Request | Very High | High | Port Iceape to UXP platform | Closed | |
|