Services

Pun bot rejects correct answer and then asks the same question again.

This error is maddening...

after write a task, hypertask show me this screen, and for some users think ‘oh hypertask no works’ attach image

As reported here: https://forums.hyperbola.info/viewtopic.php?id=110

the domain Hyperbola.info is using such SPF record that does not allow the IP address 185.26.126.154 to send emails from bissen.hyperbola.info as seen on: https://mxtoolbox.com/SuperTool.aspx?action=spf%3ahyperbola.info&run=toolpage

Correct the SPF record as to enable deliveries of emails.

This is negatively impacting Hyperbola project in public mail servers which may consider hyperbola.info domain as domain sending spam.

Jun 10 11:12:41 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:14:57 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:16:02 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:16:50 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:17:28 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:18:17 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:19:12 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:21:01 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:21:37 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:22:22 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:22:36 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:22:54 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework
Jun 10 11:23:09 stw1 courieresmtpd: error,relay=::ffff:185.26.126.154,from=<sysadmin@hyperbola.info>: 517 SPF fail bissen.hyperbola.info: Address does not pass the Sender Policy Framework

here i will report 2 issues and one change to make
issues:
1- there is a failed smtp error with post and reply
2- in the forum profile one cant add website with .xyz domain name

the change:
1- with pgp key one would add a short key link just like what was mentioned in here:
https://forums.hyperbola.info/viewtopic.php?pid=2639#p2639

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

Link pressed is white.

Solved issue is here: libregit/hyperforum

When I was adding this task, I put some long tags on it (html form allowed that) and got an error concerning too long tags field to fit in an sql datatype (max is 40 chars). Task got added anyway (just without tags). I didn’t know that and created it again.

Trying to resolve it? Can’t add cash to cash app For this, avail our cash app technical support for making the issues be rectified instantly. The technical specialists are available around the clock for quick guidance of the cash app users. Users can take help from experts at any time.

Do you ask yourself ‘why is my Epson printer offline’ even when it is turned on? If yes then you are in the right place as we are here to provide you a solution that will fix this issue.
If your printer is linked with an Ethernet cable then ensure that the cable is attached to the router and the printer in a proper manner. If you require an IP address then you can print a network configuration page.
If you are using a USB cable then you should check if it is loose or not. If you think that there is a problem with the USB cable then you can also connect it directly as an alternative to using a hub.
If it is a wireless connection then use the network configuration page to get the IP address and ensure that the printer and the system are both connected to one wifi connection.
https://www.printersupportpro.us/epson-printer-offline

The Mailling list don’t work : https://lists.hyperbola.info//mailman/listinfo/

The RFC 3461 would allow Hyperbola email accounts to request the destination email providers to point out if an email was successfully delivered.

It might not cover all transport failures, but at least has a chance to know in advance whether the message was delivered, discarding the events that happen afterwards (be it to the main inbox or subject to filtering rules such as moving to other folder, marking as spam or deleted after receipt).

Since 2022-01-25, but not exactly due to something done in this date, connecting to imap.hyperbola.info works, but authenticating doesn’t.

`ping imap.hyperbola.info` shows that the machine at siauliai.hyperbola.info (185.177.150.7) is turned on and reachable.

`openssl s_client -crlf -connect imap.hyperbola.info:993` successfully reaches the IMAP server/service. Inside the IMAP client console, doing `tag login adfeno MySupperSecretPassword` gives “tag NO [AUTHENTICATIONFAILED] Authentication failed.”.

Perhaps the seed/salt/hash of my password was corrupted on the server?

Since 2022-01-25, but not exactly due to something done in this date, connecting to imap.hyperbola.info works, but authenticating doesn’t.

`ping imap.hyperbola.info` shows that the machine at siauliai.hyperbola.info (185.177.150.7) is turned on and reachable.

`openssl s_client -crlf -connect imap.hyperbola.info:993` successfully reaches the IMAP server/service. Inside the IMAP client console, doing `tag login adfeno MySupperSecretPassword` gives “tag NO [AUTHENTICATIONFAILED] Authentication failed.”.

Perhaps the seed/salt/hash of my password was corrupted on the server?

So avatar uploading is not working well, and picture is getting minimized to nothing.

Description:

Hello developers of Hyperbola, I have recently joined the
They have done a good job.

However, I have some doubts and wanted to register in the forum
Hyperbola, but the web does not work properly with LibreJS. Could
to fix it?, maybe you already know the link of how to configure
correctly the JavaScript files.

Additional info:

• https://www.gnu.org/software/librejs/free-your-javascript.html
• https://pastebin.com/raw/dVy2m2eW (Shows error output with LibreJS)

It would be very nice if the whole web works with LibreJS.
Greetings, thank you very much for the distro

Change PunBB favicon by the Hyperbola default favicon.

This would ease their usage on other distros.

The requirement for TLS 1.2 in email effectively isolated us from internet, and yelling for change isn’t working even in communications with other free/libre system distributions and mailing lists related to free/libre software (both for software and for discussions related to the movement itself). :)

Many mailing lists at gnu.org, fsf.org, fsfla.org, libreplanet.org, and also in other free/libre system distributions aren’t accessible (e.g.: Trisquel).

Hi,

I am trying to find the license for the PNG file here: https://repo.hyperbola.info:50000/other/syslinux/ It is like the license is missing, I found the license for SVG in the file itself.

Perhaps there are other files with the same issue.

Thanks!

the message i get is :

The owner of lists.hyperbola.info has configured their website improperly. To protect your information from being stolen, Iceweasel-UXP has not connected to this website.

This site uses HTTP Strict Transport Security (HSTS) to specify that Iceweasel-UXP may only connect to it securely. As a result, it is not possible to add an exception for this certificate.

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

An issue with the scanner is quite possibly the most well-known ones and can be settled in the event that you want to eliminate the Apple Pay to Cash App mistake by utilizing the strategies that you can without much of a stretch find in the assistance community or investigate visiting the technical support locales.

we should replace the proprietary services in the forum profile with what is used by our libre software community

1- Website
2- Tox
3- Jami
4- Email
5- PGP Key
6- Jabber/Xmpp
7- Other Contact : this will be helpful to add IRC username or mastodon......
8- Other Links : Pixelfed links for those who wich to do so or other links