|
Any | Bug Report | High | High | [gvfs] add libelogind support | Closed | |
Task Description
gvfs uses some features from systemd-logind that can be provided by elogind. There is an implementation made from Gentoo [0] to add libelogind support.
|
|
Any | Bug Report | High | High | [lightdm] is running under foreground mode and causing ... | Closed | |
Task Description
Since latest update, many of my service do not start automatically. (I can start them manually though) This cause multiple errors at shutdown as well.
udev [ started ]
localmount [ started ]
dbus [ started ]
elogind [ started ]
NetworkManager [ started ]
syslog-ng [ started ]
acpid [ started ]
dhcpcd [ started ]
avahi-daemon [ started ]
netmount [ started ]
lightdm [ starting ]
alsasound [ stopped ]
avahi-dnsconfd [ stopped ]
cronie [ stopped ]
cupsd [ stopped ]
fuse [ stopped ]
ntpd [ stopped ]
libvirtd [ stopped ]
openrc-settingsd [ stopped ]
sshd [ stopped ]
thinkfan [ stopped ]
local [ stopped ]
agetty.tty5 [ stopped ]
agetty.tty3 [ stopped ]
agetty.tty6 [ stopped ]
agetty.tty4 [ stopped ]
agetty.tty2 [ stopped ]
agetty.tty1 [ stopped ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
modules-load [ started ]
lvmetad [ started ]
Before dbus update, everything was working fine.
Thanks for your help
|
|
Any | Bug Report | Very High | High | [android-udev] [MTP] unable to mount Android phone | Closed | |
Task Description
Require package: android-udev
* Add to /etc/udev/rules.d/51-android.rules
GROUP="uucp"
* Add the user to the group uucp
gpasswd -a username uucp
* Reboot
Package Information
$ pacman -Ql android-udev
android-udev /usr/
android-udev /usr/lib/
android-udev /usr/lib/udev/
android-udev /usr/lib/udev/rules.d/
android-udev /usr/lib/udev/rules.d/51-android.rules
|
|
Any | Bug Report | High | High | [gnupg] WARNING: Tor is not properly configured | Closed | |
Task Description
Explicit error
when executing the command:
$ gpg --receive-keys [key]
output:
gpg: WARNING: Tor is not properly configured
gpg: Failed key server reception: Denied permission
when executing the command [disable service Tor]:
$ gpg --receive-keys [key]
output:
gpg: WARNING: Tor is not running
gpg: recepción del servidor de claves fallida: Conexión rehusada
Possible solution
These are the patches from debian that may be causing the problem, we must check:
References: - http://daniel.gnoutcheff.name/2017-02-05-gpg-ipv6-tor-error/
Package information:
$ pacman -Ql gnupg
gnupg /usr/
gnupg /usr/bin/
gnupg /usr/bin/addgnupghome
gnupg /usr/bin/applygnupgdefaults
gnupg /usr/bin/dirmngr
gnupg /usr/bin/dirmngr-client
gnupg /usr/bin/gpg
gnupg /usr/bin/gpg-agent
gnupg /usr/bin/gpg-connect-agent
gnupg /usr/bin/gpg2
gnupg /usr/bin/gpgconf
gnupg /usr/bin/gpgparsemail
gnupg /usr/bin/gpgscm
gnupg /usr/bin/gpgsm
gnupg /usr/bin/gpgtar
gnupg /usr/bin/gpgv
gnupg /usr/bin/gpgv2
gnupg /usr/bin/kbxutil
gnupg /usr/bin/symcryptrun
gnupg /usr/bin/watchgnupg
gnupg /usr/lib/
gnupg /usr/lib/gnupg/
gnupg /usr/lib/gnupg/dirmngr_ldap
gnupg /usr/lib/gnupg/gpg-check-pattern
gnupg /usr/lib/gnupg/gpg-preset-passphrase
gnupg /usr/lib/gnupg/gpg-protect-tool
gnupg /usr/lib/gnupg/gpg-wks-client
gnupg /usr/lib/gnupg/scdaemon
gnupg /usr/share/
gnupg /usr/share/doc/
gnupg /usr/share/doc/gnupg/
gnupg /usr/share/doc/gnupg/DCO
gnupg /usr/share/doc/gnupg/DETAILS
gnupg /usr/share/doc/gnupg/FAQ
gnupg /usr/share/doc/gnupg/HACKING
gnupg /usr/share/doc/gnupg/KEYSERVER
gnupg /usr/share/doc/gnupg/OpenPGP
gnupg /usr/share/doc/gnupg/README
gnupg /usr/share/doc/gnupg/TRANSLATE
gnupg /usr/share/doc/gnupg/examples/
gnupg /usr/share/doc/gnupg/examples/README
gnupg /usr/share/doc/gnupg/examples/debug.prf
gnupg /usr/share/doc/gnupg/examples/gpgconf.conf
gnupg /usr/share/doc/gnupg/examples/pwpattern.list
gnupg /usr/share/doc/gnupg/examples/scd-event
gnupg /usr/share/doc/gnupg/examples/trustlist.txt
gnupg /usr/share/doc/gnupg/examples/vsnfd.prf
gnupg /usr/share/gnupg/
gnupg /usr/share/gnupg/distsigkey.gpg
gnupg /usr/share/gnupg/help.be.txt
gnupg /usr/share/gnupg/help.ca.txt
gnupg /usr/share/gnupg/help.cs.txt
gnupg /usr/share/gnupg/help.da.txt
gnupg /usr/share/gnupg/help.de.txt
gnupg /usr/share/gnupg/help.el.txt
gnupg /usr/share/gnupg/help.eo.txt
gnupg /usr/share/gnupg/help.es.txt
gnupg /usr/share/gnupg/help.et.txt
gnupg /usr/share/gnupg/help.fi.txt
gnupg /usr/share/gnupg/help.fr.txt
gnupg /usr/share/gnupg/help.gl.txt
gnupg /usr/share/gnupg/help.hu.txt
gnupg /usr/share/gnupg/help.id.txt
gnupg /usr/share/gnupg/help.it.txt
gnupg /usr/share/gnupg/help.ja.txt
gnupg /usr/share/gnupg/help.nb.txt
gnupg /usr/share/gnupg/help.pl.txt
gnupg /usr/share/gnupg/help.pt.txt
gnupg /usr/share/gnupg/help.pt_BR.txt
gnupg /usr/share/gnupg/help.ro.txt
gnupg /usr/share/gnupg/help.ru.txt
gnupg /usr/share/gnupg/help.sk.txt
gnupg /usr/share/gnupg/help.sv.txt
gnupg /usr/share/gnupg/help.tr.txt
gnupg /usr/share/gnupg/help.txt
gnupg /usr/share/gnupg/help.zh_CN.txt
gnupg /usr/share/gnupg/help.zh_TW.txt
gnupg /usr/share/gnupg/sks-keyservers.netCA.pem
gnupg /usr/share/info/
gnupg /usr/share/info/gnupg.info-1.gz
gnupg /usr/share/info/gnupg.info-2.gz
gnupg /usr/share/info/gnupg.info.gz
gnupg /usr/share/locale/
gnupg /usr/share/locale/ca/
gnupg /usr/share/locale/ca/LC_MESSAGES/
gnupg /usr/share/locale/ca/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/cs/
gnupg /usr/share/locale/cs/LC_MESSAGES/
gnupg /usr/share/locale/cs/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/da/
gnupg /usr/share/locale/da/LC_MESSAGES/
gnupg /usr/share/locale/da/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/de/
gnupg /usr/share/locale/de/LC_MESSAGES/
gnupg /usr/share/locale/de/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/el/
gnupg /usr/share/locale/el/LC_MESSAGES/
gnupg /usr/share/locale/el/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/en@boldquot/
gnupg /usr/share/locale/en@boldquot/LC_MESSAGES/
gnupg /usr/share/locale/en@boldquot/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/en@quot/
gnupg /usr/share/locale/en@quot/LC_MESSAGES/
gnupg /usr/share/locale/en@quot/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/eo/
gnupg /usr/share/locale/eo/LC_MESSAGES/
gnupg /usr/share/locale/eo/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/es/
gnupg /usr/share/locale/es/LC_MESSAGES/
gnupg /usr/share/locale/es/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/et/
gnupg /usr/share/locale/et/LC_MESSAGES/
gnupg /usr/share/locale/et/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/fi/
gnupg /usr/share/locale/fi/LC_MESSAGES/
gnupg /usr/share/locale/fi/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/fr/
gnupg /usr/share/locale/fr/LC_MESSAGES/
gnupg /usr/share/locale/fr/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/gl/
gnupg /usr/share/locale/gl/LC_MESSAGES/
gnupg /usr/share/locale/gl/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/hu/
gnupg /usr/share/locale/hu/LC_MESSAGES/
gnupg /usr/share/locale/hu/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/id/
gnupg /usr/share/locale/id/LC_MESSAGES/
gnupg /usr/share/locale/id/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/it/
gnupg /usr/share/locale/it/LC_MESSAGES/
gnupg /usr/share/locale/it/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/ja/
gnupg /usr/share/locale/ja/LC_MESSAGES/
gnupg /usr/share/locale/ja/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/nb/
gnupg /usr/share/locale/nb/LC_MESSAGES/
gnupg /usr/share/locale/nb/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/pl/
gnupg /usr/share/locale/pl/LC_MESSAGES/
gnupg /usr/share/locale/pl/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/pt/
gnupg /usr/share/locale/pt/LC_MESSAGES/
gnupg /usr/share/locale/pt/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/ro/
gnupg /usr/share/locale/ro/LC_MESSAGES/
gnupg /usr/share/locale/ro/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/ru/
gnupg /usr/share/locale/ru/LC_MESSAGES/
gnupg /usr/share/locale/ru/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/sk/
gnupg /usr/share/locale/sk/LC_MESSAGES/
gnupg /usr/share/locale/sk/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/sv/
gnupg /usr/share/locale/sv/LC_MESSAGES/
gnupg /usr/share/locale/sv/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/tr/
gnupg /usr/share/locale/tr/LC_MESSAGES/
gnupg /usr/share/locale/tr/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/uk/
gnupg /usr/share/locale/uk/LC_MESSAGES/
gnupg /usr/share/locale/uk/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/zh_CN/
gnupg /usr/share/locale/zh_CN/LC_MESSAGES/
gnupg /usr/share/locale/zh_CN/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/locale/zh_TW/
gnupg /usr/share/locale/zh_TW/LC_MESSAGES/
gnupg /usr/share/locale/zh_TW/LC_MESSAGES/gnupg2.mo
gnupg /usr/share/man/
gnupg /usr/share/man/man1/
gnupg /usr/share/man/man1/dirmngr-client.1.gz
gnupg /usr/share/man/man1/gpg-agent.1.gz
gnupg /usr/share/man/man1/gpg-connect-agent.1.gz
gnupg /usr/share/man/man1/gpg-preset-passphrase.1.gz
gnupg /usr/share/man/man1/gpg-wks-client.1.gz
gnupg /usr/share/man/man1/gpg-wks-server.1.gz
gnupg /usr/share/man/man1/gpg.1.gz
gnupg /usr/share/man/man1/gpgconf.1.gz
gnupg /usr/share/man/man1/gpgparsemail.1.gz
gnupg /usr/share/man/man1/gpgsm.1.gz
gnupg /usr/share/man/man1/gpgv.1.gz
gnupg /usr/share/man/man1/scdaemon.1.gz
gnupg /usr/share/man/man1/symcryptrun.1.gz
gnupg /usr/share/man/man1/watchgnupg.1.gz
gnupg /usr/share/man/man7/
gnupg /usr/share/man/man7/gnupg.7.gz
gnupg /usr/share/man/man8/
gnupg /usr/share/man/man8/addgnupghome.8.gz
gnupg /usr/share/man/man8/applygnupgdefaults.8.gz
gnupg /usr/share/man/man8/dirmngr.8.gz
|
|
Any | Bug Report | High | High | [openRC] cowardly refusing to concatenate a logfile int ... | Closed | |
Task Description
Message error:
Cowardly refusing to concatenate a logfile into self.
Please change rc_log_path to something other than /var/log/rc.log to get rid of this message
|
|
Any | Bug Report | High | High | [openrc] hwclock: Cannot access the Hardware Clock via ... | Closed | |
Task Description
Warning init:
* Setting hardware clock using the system clock [UTC] ...
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --debug option to see the details of our search for an access method.
* Failed to sync clocks
[ !! ]
* ERROR: hwclock failed to stop
Restart init:
[root@hyperbola heckyel]# /etc/init.d/hwclock restart
* WARNING: you are stopping a boot service
* WARNING: you are stopping a boot service
* Stopping rsyslog ... [ ok ]
* Setting hardware clock using the system clock [UTC] ...
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --debug option to see the details of our search for an access method.
* Failed to sync clocks [ !! ]
* ERROR: hwclock failed to stop
References:
|
|
Any | Bug Report | Medium | High | [postgresql] creating directory Permission denied | Closed | |
Task Description
In the File postgresql.install
the output is:
==> requires datadir /var/lib/data
==> run as user postgres: 'initdb -D /var/lib/data'
when it should be:
==> requires datadir /var/lib/postgres/data
==> run as user postgres: 'initdb -D /var/lib/postgres/data'
It may be necessary to change:
local datadir = "/var/lib/data"
to
local datadir = "/var/lib/postgres/data"
The comand for default fails:
creating directory /var/lib/data... initdb: could not create directory "/var/lib/data": Permission denied
|
|
Any | Bug Report | Defer | High | [texlive-most] cannot export LaTeX - input csr10' fail ... | Closed | |
Task Description
I was using GNU Emacs, and tried to export LaTeX file or make a PDF. It seems that texlive package is broken, some fonts are missing.
The group named texlive-most cannot be properly installed.
admin→ pacsearch texlive
extra/texlive-bibtexextra 2016.43765-1 (texlive-most)
TeX Live - Additional BibTeX styles and bibliography databases
extra/texlive-bin 2016.41290-12.hyperbola1 [installed]
TeX Live binaries (Hyperbola rebranded)
extra/texlive-core 2016.43757-1.hyperbola2 (texlive-most) [installed]
TeX Live core distribution, without nonfree add-on packages (Hyperbola rebranded)
extra/texlive-fontsextra 2016.43763-1.hyperbola2 (texlive-most) [installed]
TeX Live - all sorts of extra fonts, without nonfree add-on packages
extra/texlive-formatsextra 2016.41438-3 (texlive-most) [installed]
TeX Live - collection of extra TeX 'formats'
extra/texlive-games 2016.43415-1 (texlive-most)
TeX Live - Setups for typesetting various board games, including chess
extra/texlive-genericextra 2016.43605-1 (texlive-most) [installed]
TeX Live - mixed bag of generic macro packages and fonts
extra/texlive-htmlxml 2016.43769-1 (texlive-most)
TeX Live - Packages to convert LaTeX to XML/HTML, and typeset XML/SGML
extra/texlive-humanities 2016.43711-1 (texlive-most)
TeX Live - LaTeX packages for law, linguistics, social sciences, and humanities
extra/texlive-langchinese 2016.43669-1 (texlive-lang)
TeX Live - Fonts and macro packages to typeset Chinese texts
extra/texlive-langcjk 2014.0-1
TeX Live - CJK (Chinese, Japanese, Korean) metapackage
extra/texlive-langcyrillic 2016.43417-1 (texlive-lang)
TeX Live - Fonts and macro packages to typeset Cyrillic texts
extra/texlive-langextra 2016.43739-1 (texlive-lang)
TeX Live - Bundle of all extra language support
extra/texlive-langgreek 2016.43222-1 (texlive-lang)
TeX Live - Fonts and support for typesetting Greek
extra/texlive-langjapanese 2016.43741-1 (texlive-lang)
TeX Live - Fonts and macro packages to typeset Japanese texts
extra/texlive-langkorean 2016.43130-1 (texlive-lang)
TeX Live - Fonts and macro packages to typeset Korean texts
extra/texlive-latexextra 2016.43768-1.hyperbola2 (texlive-most) [installed]
TeX Live - Large collection of add-on packages for LaTeX, without nonfree add-on packages
extra/texlive-music 2016.43375-1 (texlive-most)
TeX Live - Music typesetting packages
extra/texlive-pictures 2016.43767-1 (texlive-most) [installed]
TeX Live - Packages for drawings graphics
extra/texlive-plainextra 2016.43137-1 (texlive-most) [installed]
TeX Live - A collection of add-on packages and macros for plain TeX
extra/texlive-pstricks 2016.43710-1 (texlive-most) [installed]
TeX Live - Additional PSTricks packages
extra/texlive-publishers 2016.43764-1 (texlive-most)
TeX Live - LaTeX classes and packages for specific publishers
extra/texlive-science 2016.43747-1 (texlive-most)
TeX Live - Typesetting for mathematics, natural and computer sciences
[~] admin→ sudo pacman -S texlive-most
:: There are 15 members in group texlive-most:
:: Repository extra
1) texlive-bibtexextra 2) texlive-core 3) texlive-fontsextra 4) texlive-formatsextra 5) texlive-games 6) texlive-genericextra
7) texlive-htmlxml 8) texlive-humanities 9) texlive-latexextra 10) texlive-music 11) texlive-pictures 12) texlive-plainextra
13) texlive-pstricks 14) texlive-publishers 15) texlive-science
Enter a selection (default=all):
warning: texlive-core-2016.43757-1.hyperbola2 is up to date -- reinstalling
warning: texlive-fontsextra-2016.43763-1.hyperbola2 is up to date -- reinstalling
warning: texlive-formatsextra-2016.41438-3 is up to date -- reinstalling
warning: texlive-genericextra-2016.43605-1 is up to date -- reinstalling
warning: texlive-latexextra-2016.43768-1.hyperbola2 is up to date -- reinstalling
warning: texlive-pictures-2016.43767-1 is up to date -- reinstalling
warning: texlive-plainextra-2016.43137-1 is up to date -- reinstalling
warning: texlive-pstricks-2016.43710-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Packages (15) texlive-bibtexextra-2016.43765-1 texlive-core-2016.43757-1.hyperbola2 texlive-fontsextra-2016.43763-1.hyperbola2
texlive-formatsextra-2016.41438-3 texlive-games-2016.43415-1 texlive-genericextra-2016.43605-1
texlive-htmlxml-2016.43769-1 texlive-humanities-2016.43711-1 texlive-latexextra-2016.43768-1.hyperbola2
texlive-music-2016.43375-1 texlive-pictures-2016.43767-1 texlive-plainextra-2016.43137-1 texlive-pstricks-2016.43710-1
texlive-publishers-2016.43764-1 texlive-science-2016.43747-1
Total Download Size: 27.66 MiB
Total Installed Size: 1300.90 MiB
Net Upgrade Size: 110.88 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages...
texlive-bibtexextra-2016.43765-1-any 1541.4 KiB 275K/s 00:06 [###############################################] 100%
texlive-games-2016.43415-1-any 416.5 KiB 356K/s 00:01 [###############################################] 100%
texlive-htmlxml-2016.43769-1-any 1197.6 KiB 300K/s 00:04 [###############################################] 100%
texlive-humanities-2016.43711-1-any 299.0 KiB 664K/s 00:00 [###############################################] 100%
texlive-music-2016.43375-1-any 12.2 MiB 398K/s 00:31 [###############################################] 100%
texlive-publishers-2016.43764-1-any 9.2 MiB 471K/s 00:20 [###############################################] 100%
texlive-science-2016.43747-1-any 2.9 MiB 376K/s 00:08 [###############################################] 100%
(15/15) checking keys in keyring [###############################################] 100%
(15/15) checking package integrity [###############################################] 100%
(15/15) loading package files [###############################################] 100%
(15/15) checking for file conflicts [###############################################] 100%
(15/15) checking available disk space [###############################################] 100%
:: Processing package changes...
( 1/15) reinstalling texlive-core [###############################################] 100%
>>> updmap custom entries should go into /etc/texmf/web2c/updmap-local.cfg
>>> fmtutil custom entries should go into /etc/texmf/web2c/fmtutil-local.cnf
( 2/15) installing texlive-bibtexextra [###############################################] 100%
( 3/15) reinstalling texlive-fontsextra [###############################################] 100%
( 4/15) reinstalling texlive-formatsextra [###############################################] 100%
( 5/15) installing texlive-games [###############################################] 100%
( 6/15) reinstalling texlive-genericextra [###############################################] 100%
( 7/15) installing texlive-htmlxml [###############################################] 100%
( 8/15) reinstalling texlive-latexextra [###############################################] 100%
( 9/15) installing texlive-humanities [###############################################] 100%
Optional dependencies for texlive-humanities
texlive-pictures: for package qtree [installed]
(10/15) installing texlive-music [###############################################] 100%
Optional dependencies for texlive-music
python2: for scripts from the lilyglyphs packages [installed]
(11/15) reinstalling texlive-pictures [###############################################] 100%
(12/15) reinstalling texlive-plainextra [###############################################] 100%
(13/15) reinstalling texlive-pstricks [###############################################] 100%
(14/15) installing texlive-publishers [###############################################] 100%
(15/15) installing texlive-science [###############################################] 100%
Optional dependencies for texlive-science
python2-pygments: for pygmentex
:: Running post-transaction hooks...
(1/3) Updating TeXLive filename database...
(2/3) Updating TeXLive format files...
kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf csr10
! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.
kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf ecrm1000
! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000
Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000
Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.
kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf ecrm1000
! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000
Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000
Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.
kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf csr10
! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.
kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf csr10
! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.
fmtutil [ERROR]: running `pdftex -ini -jobname=utf8mex -progname=utf8mex -enc *utf8mex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile pdfmex.ini for pdfmex/pdftex not found.
fmtutil [ERROR]: running `pdftex -ini -jobname=csplain -progname=csplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini -jobname=pdfjadetex -progname=pdfjadetex *pdfjadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini -jobname=jadetex -progname=jadetex *jadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile mex.ini for mex/pdftex not found.
fmtutil [ERROR]: running `xetex -ini -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini -jobname=pdfcsplain -progname=pdfcsplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `luatex -ini -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
error: command failed to execute correctly
(3/3) Updating TeXLive font maps...
[~]
a
|
|
Testing | Bug Report | Very Low | High | [iceweasel-uxp] Advanced font option dialogue not appea ... | Closed | |
Task Description
I tried using Iceweasel-UXP pre-release, but I’m unable to set any different font, size and encoding, and search any words/characters within page.
|
|
Any | Bug Report | Very Low | High | Desite "noauto" specified in /etc/fstab all devices get ... | Closed | |
Task Description
Description:
I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.
Who can help me, not to mount a device during boot?
|
|
Testing | Bug Report | Very Low | High | [iceweasel-uxp] recaptcha issue (webchat.freenode.net) | Closed | |
Task Description
recaptcha is not working on webchat.freenode.net (and probably other websites) with iceweasel-uxp (was working fine with iceweasel-esr)
https://framapic.org/ZdvYH2JCM39J/HFDSI7z0hXvS.png
|
|
Stable | Bug Report | Very Low | High | [iceweasel-uxp] 52.9.0_20180601-8 has an issue on Tabs ... | Closed | |
Task Description
Description:
-Tabs don’t have X on the right to close it. -Download window has an issue on font.
Note: the font is smaller on Tab description and overal it is nice
Additional info: * package version(s): iceweasel-uxp 52.9.0_20180601-8
Steps to reproduce:
|
|
Any | Bug Report | Very Low | High | [openrc] scripts in /etc/local.d seem ignored | Closed | |
Task Description
Description:
Since the latest update of openrc, I am under the impression that the scripts in /etc/local.d are not executed anymore upon boot or shutdown. rc.log shows nothing though.
Additional info: * openrc 0.28-18
Steps to reproduce:
Write a dummy script which says hello in /etc/local.d, make it executable and see that it is discarded.
|
|
Any | Bug Report | High | High | [firetools] doesn't show up as being sandboxed in sandb ... | Closed | |
Task Description
Firetools sandbox list shows nothing whenever I use icedove-hardened or iceweasel-uxp-hardened. or vlc, or anything at this point.
Firejail still works, but the sandbox list on the applet, shows nothing.
I don’t really know why though. may need to updated.
dunno. I can wait on this one if need be, but it is kind of annoying.
|
|
Stable | Bug Report | Very Low | High | [lm_sensors] Fail to load it87 module at boot | Closed | |
Task Description
Description:
I ran sensors-detect, it detected two modules :
coretemp it87
Those have been added to /etc/sysconfig/lm_sensors :
# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
# The format of this file is a shell script that simply defines variables:
# HWMON_MODULES for hardware monitoring driver modules, and optionally
# BUS_MODULES for any required bus driver module (for example for I2C or SPI).
HWMON_MODULES="coretemp it87"
But only coretemp is loaded at boot.
I can manually load it87 module (modprobe it87) and get all sensors working but for some reason it87 module is not loaded at boot.
|
|
Stable | Bug Report | Very Low | High | java cacerts file is empty | Closed | |
Task Description
/etc/ssl/certs/java/cacerts has 0 entries, resulting in ssl handshake errors in java applications.
Package versions: * ca-certificates 20170307-1 * ca-certificates-utils 20170307-1
|
|
Any | Bug Report | Medium | High | [qtox][toxic] rebuild package | Closed | |
Task Description
Description:
Hi guys. From → https://issues.hyperbola.info/index.php?do=details&task_id=1121
Now is necessary rebuild qtox and toxic.
Additional info:
toxic:
ldd $(command -v toxic) | grep 'not found'
libtoxdns.so.1 => not found
libtoxencryptsave.so.1 => not found
libtoxav.so.1 => not found
libtoxcore.so.1 => not found
libtoxcrypto.so.1 => not found
libtoxnetwork.so.1 => not found
libtoxdht.so.1 => not found
libtoxnetcrypto.so.1 => not found
libtoxfriends.so.1 => not found
libtoxmessenger.so.1 => not found
libtoxgroup.so.1 => not found
qtox:
ldd $(command -v qtox) | grep 'not found'
libtoxcore.so.1 => not found
libtoxav.so.1 => not found
libtoxencryptsave.so.1 => not found
|
|
Any | Bug Report | High | High | [firetools] doesn't show up as being sandboxed in sandb ... | Closed | |
Task Description
Neither iceweasel-uxp, nor icedove nor hexchat, nor vlc show up as being sandboxed in sandbox list.
I also check and see that firejail isn’t running also.
I think it might be wise to upgrade firetools. and also to make sure hardened packages such as icedove-hardened/iceweasel-uxp-hardened work properly.
This should be considered a high level priority due to firetools being a security application. Wouldn’t you say?
|
|
Any | Bug Report | Very Low | High | [icedove-uxp] does not import from existing installatio ... | Closed | |
Task Description
It behaves like a clean installation, does not import the configurations and data from a existing installation of icedove.
The wizard import does not work too. It returns the message:
No application to import data from found.
A workaround
it copy the directory ~/.icedove to ~/.mozilla/thunderbird:
cp --recursive --verbose ~/.icedove/ ~/.mozilla/thunderbird/
|
|
Any | Bug Report | Medium | High | [xf86-video-intel] windows are not rendered correctly i ... | Closed | |
Task Description
I’m encountering this bug when using latest Pale Moon (version 2.8.0.1).
https://forum.palemoon.org/viewtopic.php?f=37&t=19941&sid=3cd95f0870b5cef74c582eb9a3ea778a
The bug doesn’t only affect the preferences dialog - other windows are not rendered correctly either such as DownThemAll! add-on (see attached image).
The suggested fix is to update the intel driver (the about:config suggested change makes the preference dialog usable but other windows such as DownThemAll! still aren’t displayed correctly).
I’m using a T60 with intel graphics.
|
|
Any | Bug Report | Very Low | High | [iceweasel-uxp] windows don't render correctly in add-o ... | Closed | |
Task Description
I can’t switch windows in add-ons such as session manager.
It’s probably the same bug which appears in palemoon (inherited from UXP). See here:
https://issues.hyperbola.info/index.php?do=details&task_id=1160&opened=24&status[0]=
https://forum.palemoon.org/viewtopic.php?f=37&t=19941&sid=3cd95f0870b5cef74c582eb9a3ea778a
|
|
Any | Bug Report | Very High | High | [openrc] needs a minor fix | Closed | |
Task Description
Description:
Additional info:
openrc /usr/lib/rc/sh/init.sh
—
- mount -n -t proc -o noexec,nosuid,nodev,gid=proc,hidepid=2 proc /proc
+ mount -n -t proc -o noexec,nosuid,nodev proc /proc
+ mount -n /proc -o remount,gid=26,hidepid=2
Steps to reproduce:
|
|
Any | Bug Report | Very Low | High | [nginx]: cannot start if NetworkManager is not started | Closed | |
Task Description
Description:
Nginx web server shall be running with or without the external network, and without NetworkManager.
rc-service nginx start
Additional info:
$ pacman -Si nginx
Repositorio : extra
Nombre : nginx
Versión : 1.12.2-2.hyperbola4
Descripción : Lightweight HTTP server and IMAP/POP3 proxy server, with logger recommendation and OpenRC support
Arquitectura : x86_64
URL : https://nginx.org
Licencias : custom
Grupos : Nada
Provee : Nada
Depende de : pcre zlib openssl geoip
Dependencias opcionales : logger: message logging support
En conflicto con : nginx-mainline
Remplaza a : nginx-mainline
Tamaño de la descarga : 478,89 KiB
Tamaño de la instalación : 1598,00 KiB
Encargado : André Silva <emulatorman@hyperbola.info>
Fecha de creación : lun 11 jun 2018 18:20:12 -05
Validado por : Suma MD5 Suma SHA-256 Firma
$ pacman -Ql nginx
nginx /etc/
nginx /etc/conf.d/
nginx /etc/conf.d/nginx
nginx /etc/init.d/
nginx /etc/init.d/nginx
nginx /etc/logrotate.d/
nginx /etc/logrotate.d/nginx
nginx /etc/nginx/
nginx /etc/nginx/fastcgi.conf
nginx /etc/nginx/fastcgi_params
nginx /etc/nginx/koi-utf
nginx /etc/nginx/koi-win
nginx /etc/nginx/mime.types
nginx /etc/nginx/nginx.conf
nginx /etc/nginx/scgi_params
nginx /etc/nginx/uwsgi_params
nginx /etc/nginx/win-utf
nginx /usr/
nginx /usr/bin/
nginx /usr/bin/nginx
nginx /usr/share/
nginx /usr/share/licenses/
nginx /usr/share/licenses/nginx/
nginx /usr/share/licenses/nginx/LICENSE
nginx /usr/share/man/
nginx /usr/share/man/man8/
nginx /usr/share/man/man8/nginx.8.gz
nginx /usr/share/nginx/
nginx /usr/share/nginx/html/
nginx /usr/share/nginx/html/50x.html
nginx /usr/share/nginx/html/index.html
nginx /usr/share/vim/
nginx /usr/share/vim/vimfiles/
nginx /usr/share/vim/vimfiles/ftdetect/
nginx /usr/share/vim/vimfiles/ftdetect/nginx.vim
nginx /usr/share/vim/vimfiles/indent/
nginx /usr/share/vim/vimfiles/indent/nginx.vim
nginx /usr/share/vim/vimfiles/syntax/
nginx /usr/share/vim/vimfiles/syntax/nginx.vim
nginx /var/
nginx /var/lib/
nginx /var/lib/nginx/
nginx /var/lib/nginx/proxy/
nginx /var/log/
nginx /var/log/nginx/
Steps to reproduce:
1. Disconnect network. Start computer.
2. Try to start nginx with above command.
|
|
Any | Bug Report | High | High | [filesystem] contains systemd references and files | Closed | |
Task Description
Description:
Additional info: * package version(s) * config and/or log files etc.
diff --git hyperbola.7.txt hyperbola.7.txt.new
index 842e532..927cf6a 100644
--- hyperbola.7.txt
+++ hyperbola.7.txt.new
@@ -24,14 +24,12 @@ To view available services, use 'rc-status --all'.
HOSTNAME[[H]]
-------------
-The hostname of the machine can be set using 'hostnamectl set-hostname <hostname>'.
+The hostname of the machine can be set using 'hostname <hostname>' or 'sysctl -w kernel.hostname=<hostname>'.
It will then be written to /etc/hostname.
LOCALIZATION[[L]]
-----------------
Various locales may be enabled in /etc/locale.gen and are generated by 'locale-gen'.
-The system-wide locale to be used can be configured in /etc/locale.conf.
-These settings can be overridden on a per-user basis by keeping a user-specific locale.conf in $HOME/.config/locale.conf.
The user-specific file will take precedence if it exists.
VIRTUAL CONSOLE[[V]]
@@ -72,15 +70,16 @@ Syslinux is configured in /boot/syslinux/syslinux.cfg.
MODULES[[M]]
------------
Most modules should be loaded on-demand.
-Modules to be unconditionally loaded at boot can be specified in /etc/modules-load.d/,
+Modules to be unconditionally loaded at boot can be specified in /etc/conf.d/modules,
and modules to be blacklisted from automatically loading can be configured in /etc/modprobe.d/.
SEE ALSO
--------
-*hostname*(5), *locale.conf*(5), *timezone*(3), *hwclock*(8),
-*fstab*(5), *crypttab*(5), *mkinitcpio*(8), *pacman*(8), *pacman.conf*(5),
-*grub-mkconfig*(8), *syslinux*(1), *modules-load.d*(5), *modprobe.d*(5)
+*hostname*(5), *timezone*(3), *hwclock*(8),
+*fstab*(5), *cryptsetup*(8), *mkinitcpio*(8), *pacman*(8), *pacman.conf*(5),
+*grub-mkconfig*(8), *syslinux*(1), *modprobe.d*(5),
+*openrc*(8), *rc-service*(8), *rc-status*(8), *rc-update*(8)
AUTHORS
-------
Steps to reproduce:
* Run:
~ man hyperbola
|
|
Any | Bug Report | Very High | High | [mkinitcpio] consolefont and keymap hooks is adapted to ... | Closed | |
Task Description
Description:
Additional info:
/usr/lib/initcpio/install/consolefont
---
- [[ -s /etc/vconsole.conf ]] && . /etc/vconsole.conf
+ [[ -s /etc/conf.d/consolefont ]] && . /etc/conf.d/consolefont
- if [[ $FONT ]]; then
- for file in "/usr/share/kbd/consolefonts/$FONT".@(fnt|psf?(u))?(.gz); do
+ if [[ $consolefont ]]; then
+ for file in "/usr/share/kbd/consolefonts/$consolefont".@(fnt|psf?(u))?(.gz); do
- error "consolefont: requested font not found: \`%s'" "$FONT"
+ error "consolefont: requested font not found: \`%s'" "$consolefont"
-This hook loads consolefont specified in vconsole.conf during early
-userspace.
+This hook loads consolefont specified in /etc/conf.d/consolefont during
+early userspace.
/usr/lib/initcpio/install/keymap
---
- for cfg in /etc/{vconsole,locale}.conf; do
+ for cfg in /etc/{conf.d/keymaps,locale}.conf; do
- loadkeys -q $uc ${KEYMAP:-us} -b > "$BUILDROOT/keymap.bin"
+ loadkeys -q $uc ${keymap:-us} -b > "$BUILDROOT/keymap.bin"
-This hook loads keymap(s) specified in vconsole.conf during early
-userspace.
+This hook loads keymap(s) specified in /etc/conf.d/keymaps during
+early userspace.
Repository : core
Name : mkinitcpio
Version : 23-1.hyperbola3.1
Description : Modular initramfs image creation utility, with eudev support
Architecture : any
URL : https://projects.archlinux.org/mkinitcpio.git/
Licenses : GPL
Groups : None
Provides : None
Depends On : awk mkinitcpio-busybox>=1.19.4-2 kmod util-linux>=2.23 libarchive coreutils bash findutils grep filesystem>=2011.10-1 gzip eudev
Optional Deps : xz: Use lzma or xz compression for the initramfs image
bzip2: Use bzip2 compression for the initramfs image
lzop: Use lzo compression for the initramfs image
lz4: Use lz4 compression for the initramfs image
mkinitcpio-nfs-utils: Support for root filesystem on NFS
Conflicts With : None
Replaces : None
Download Size : 38.40 KiB
Installed Size : 186.00 KiB
Packager : André Silva <emulatorman@hyperbola.info>
Build Date : Fri 05 Oct 2018 03:28:32 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature
Steps to reproduce:
|
|
Any | Bug Report | Very Low | High | [kdelibs4support] XDG_RUNTIME_DIR not set | Closed | |
|
|
Any | Bug Report | Very Low | High | [blueman] org.freedesktop.DBus.Error.NameHasNoOwner | Closed | |
|
|
Any | Bug Report | Very Low | High | error: extract: not overwriting dir with file /usr/loca ... | Closed | |
|
|
Any | Bug Report | Very Low | High | tp_smapi not working with most recent libre kerne; | Closed | |
|
|
Stable | Bug Report | Medium | High | [tp_smapi] not working with most recent libre kernel | Closed | |
|
|
Stable | Bug Report | Very Low | High | problems with kdenetwork-kopete and kaccounts-intergrat ... | Closed | |
|
|
Any | Bug Report | Low | High | [kaccounts-integration] option to add NextCloud/OwnClou ... | Closed | |
|
|
Any | Bug Report | Low | High | [kdenetwork-kopete] clicking to add an Jabber Account o ... | Closed | |
|
|
Any | Bug Report | Low | High | [xfce4-power-manager] locking session issue | Closed | |
|
|
Stable | Bug Report | Very Low | High | [devede] xorriso unsupported option '-dvd-video' | Closed | |
|
|
Any | Bug Report | Very Low | High | mach package command crashes and fails to build the pac ... | Closed | |
|
|
Any | Bug Report | Medium | High | [notmuch-mutt] missing requirement | Closed | |
|
|
Testing | Bug Report | Very Low | High | [cronie] /bin/sh: /usr/bin/nano: No existe el fichero o ... | Closed | |
|
|
Any | Bug Report | Very Low | High | groff: package not built with URW fonts properly or suc ... | Closed | |
|
|
Any | Bug Report | Medium | High | [cups] lp command no longer works | Closed | |
|
|
Stable | Bug Report | Very Low | High | [ebtables] require rebuild | Closed | |
|
|
Stable | Bug Report | Very Low | High | [gufw] error response to PolicyKit daemon | Closed | |
|
|
Stable | Bug Report | Very Low | High | [firewalld] Failed to read file "/proc/sys/net/netfilte ... | Closed | |
|
|
Any | Bug Report | Medium | High | [libvirt] USB device passthrough can't be used due to ... | Closed | |
|
|
Stable | Bug Report | Very Low | High | [vlc] DVB : cache_block stream error: cannot pre fill b ... | Closed | |
|
|
Any | Bug Report | Very Low | High | [vhba] Kernel module could not be loaded | Closed | |
|
|
Any | Bug Report | Medium | High | [cdemu-daemon] Malfunctioning service | Closed | |
|
|
Any | Bug Report | Very Low | High | [rubyripper] GUI doesn't work | Closed | |
|
|
Stable | Bug Report | Very Low | High | [nftables] init service ERROR: nftables failed to start | Closed | |
|
|
Stable | Bug Report | Very Low | High | [apache][module] mod_wsgi returns "undefined symbol: Py ... | Closed | |
|