Packages

sudo service httpd status
* status: crashed

Temp solved:

sed 's|start-stop-daemon --start -- ${APACHE2} ${APACHE2_OPTS} -k start|${APACHE2} ${APACHE2_OPTS} -k start|' -i /etc/init.d/httpd

Error creating proxy: Error al llamar StartSereviceByName para org.gtk.vfs.UDisks2VolumeMonitor: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process org.gtk.vfs.UDisks2VolumeMonitor exited with status 127 (g-dbus-error-quark, 25)

The programs brasero, xfburn, AcetoneISO, K3b are affected by this bug.

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

I can’t update filters or update with iceweasel-uxp-ublock-origin.
When I toggle the additional filters list, it is empty.

Description:

Iceweasel-ESR always center the Top Site when there is enough room:
https://framapic.org/K3b1UNn7p1Oj/rJssWooBCdXh.png

Iceweasel-UXP is changing the positioning causing the Top Site not aligned and not centered:
https://framapic.org/cRF237xTBQ76/N6qQpO14B65b.png

https://framapic.org/cH8ncT7LHTO6/NeakZ5GqbNEt.png

Additional info:
* package version(s): 52.9.0_20180601-3

Steps to reproduce:

Changing the size of the window.

Description:
There is a strange bug (white rectangle) in the FindBar when a phrase isn’t found.

Additional info:
* package version(s): 52.9.0_20180601-3

Steps to reproduce:
Go to Edit > Find

Then put a phrase in the FindBar to search it in any page, if it isn’t found, appears a strange “white rectangle” covering the phrase.

Description:
“About Iceweasel-UXP” window contains some minor issues to be fixed:

• “Iceweasel-UXP” instead of “Iceweasel” because we are a different project.
• “Hyperbola Project” instead of “the Hyperbola Project” as link to point to Hyperbola site.
• “for Iceweasel-UXP application” instead of “for Iceweasel rebranding” because we are maintaining an entire application, not just rebranding.

Additional info:
* package version(s): 52.9.0_20180601-3

Steps to reproduce:
Go to Help > About Iceweasel-UXP

I tried using Iceweasel-UXP pre-release, but I’m unable to set any different font, size and encoding, and search any words/characters within page.

Description:
FindBar doesn’t work with langpacks (l10n) installed, however if Iceweasel-UXP is used without it, FindBar works again.

Additional info:
* package version(s): 52.9.0_20180601-2
* config and/or log files etc:

[JavaScript Error: "chrome://global/content/bindings/findbar.xml : Unable to run script because scripts are blocked internally."]

[JavaScript Error: "chrome://global/content/bindings/findbar.xml : Unable to run script because scripts are blocked internally."]

[JavaScript Error: "chrome://global/content/bindings/findbar.xml : Unable to run script because scripts are blocked internally."]

[JavaScript Error: "XML Parsing Error: undefined entity
Location: jar:file:///usr/lib/iceweasel-uxp/omni.ja!/chrome/toolkit/content/global/bindings/findbar.xml
Line Number 172, Column 10:" {file: "jar:file:///usr/lib/iceweasel-uxp/omni.ja!/chrome/toolkit/content/global/bindings/findbar.xml" line: 172 column: 10 source: "         <xul:toolbarbutton anonid="find-next""}]

[JavaScript Error: "TypeError: findBar._findField is undefined" {file: "chrome://browser/content/tabbrowser.xml" line: 184}]
getFindBar@chrome://browser/content/tabbrowser.xml:184:11
@chrome://browser/content/browser.js:184:10
oncommand@chrome://browser/content/browser.xul:1:1

[JavaScript Warning: "Error in parsing value for 'max-width'.  Declaration dropped." {file: "chrome://browser/content/browser.xul" line: 0 column: 0 source: "-6.534000000000001px"}]

[JavaScript Warning: "Error in parsing value for 'max-width'.  Declaration dropped." {file: "chrome://browser/content/browser.xul" line: 0 column: 0 source: "-13.265999999999998px"}]

[JavaScript Warning: "Error in parsing value for 'max-width'.  Declaration dropped." {file: "chrome://browser/content/browser.xul" line: 0 column: 0 source: "-10.2px"}]

[JavaScript Warning: "Error in parsing value for 'max-width'.  Declaration dropped." {file: "chrome://browser/content/browser.xul" line: 0 column: 0 source: "-10.2px"}]

Steps to reproduce:

• Install iceweasel-uxp and any l10n package (eg. iceweasel-uxp-l10n-en-gb)
• Run:

  LC_ALL=en_GB.UTF-8 iceweasel-uxp

• Go Edit > Find

recaptcha is not working on webchat.freenode.net (and probably other websites) with iceweasel-uxp (was working fine with iceweasel-esr)

https://framapic.org/ZdvYH2JCM39J/HFDSI7z0hXvS.png

Hello,

I can’t manually install some extensions I was using successfully with iceweasel-esr (52.9.x) previously.
Notably :

https-everywhere https://addons.mozilla.org/en-US/firefox/addon/https-everywhere/ watch-with-mpv https://addons.mozilla.org/en-US/firefox/addon/watch-with-mpv/ tampermonkey https://addons.mozilla.org/en-US/firefox/addon/tampermonkey/ Save URL to Wayback Machine https://addons.mozilla.org/en-US/firefox/addon/save-url-to-wayback-machine

How to install them with iceweasel-uxp ?

Description:
There’s a XML parsing error in Iceweasel-UXP when it’s accessing a non-existent site or about:help

Additional info:
* package version(s): 52.9.0_20180601-7
* config and/or log files etc:

XML Parsing Error: undefined entity Location: jar:file:///usr/lib/iceweasel-uxp/browser/omni.ja!/chrome/browser/content/browser/aboutNetError.xhtml Line Number 22, Column 12:
    <title>&loadError.label;</title>
-----------^

Steps to reproduce:

• Install Iceweasel-UXP:

  # pacman -S iceweasel-uxp

• Run Iceweasel-UXP:

  ~ iceweasel-uxp

• Type about:help or a non-existent site in the address bar

Description:
There’s a XML parsing error in Iceweasel-UXP when it’s accessing in a feed subscription.

Additional info:
* package version(s): 52.9.0_20180601-7
* config and/or log files etc:

XML Parsing Error: undefined entity Location: jar:file:///usr/lib/iceweasel-uxp/browser/omni.ja!/chrome/browser/content/browser/feeds/subscribe.xhtml Line Number 25, Column 12:
    <title>&feedPage.title;</title>
-----------^

Steps to reproduce:

• Install Iceweasel-UXP:

  # pacman -S iceweasel-uxp

• Run Iceweasel-UXP:

  ~ iceweasel-uxp

• Enter to Hyperbola RSS Feeds page and then subscribe in one of feeds available.

Description:
Context menu not being highlighted in UXP applications such as Iceweasel-UXP. This issue is generated in machines with i915 graphic cards using the Intel graphics driver .

Additional info:
* package version(s): 52.9.0_20180601-7

Steps to reproduce:

• Install Iceweasel-UXP:

  # pacman -S iceweasel-uxp

• Run Iceweasel-UXP:

  ~ iceweasel-uxp

• Open new tabs with right click to use context menu.

I opened up (and customised) the menu box, but edit and zoom control button icons are gone missing, except in toolbars.

Also, what about developer button (wrench icon)?

Description:

Applying any theme from https://addons.mozilla.org/en-US/firefox/themes/ is working but after closing and restarting iceweasel-uxp the theme is lost.

Additional info:
* package version : 52.9.0_20180601-8

Description:

During the installation, a group error message is displayed.

Additional info:
* package version(s)

$ pacman -Si ntop
Repositorio               : community
Nombre                    : ntop
Versión                   : 5.0.1-11.hyperbola3
Descripción               : A network traffic probe that shows the network usage, with libressl and OpenRC support
Arquitectura              : x86_64
URL                       : https://www.ntop.org/
Licencias                 : GPL-3
Grupos                    : Nada
Provee                    : Nada
Depende de                : libevent  libpcap  gd  glibc libxml2  libressl  rrdtool  pcre geoip  lua  python2
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 21,33 MiB
Tamaño de la instalación  : 48,51 MiB
Encargado                 : HyperBuilder
                            <hyperbuilder@hyperbola.info>
Fecha de creación         : mié 27 mar 2019 17:09:11 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ ntop
Thu Jul 18 19:53:19 2019  Initializing gdbm databases
Thu Jul 18 19:53:19 2019  **ERROR** ....open of /var/lib/ntop/prefsCache.db failed: File open error
Thu Jul 18 19:53:19 2019  Possible solution: please use '-P <directory>'
Thu Jul 18 19:53:19 2019  **FATAL_ERROR** GDBM open failed, ntop shutting down...
Thu Jul 18 19:53:19 2019  CLEANUP[t140566150068416]: ntop caught signal 2 [state=2]
Thu Jul 18 19:53:19 2019  ntop is now quitting...

Steps to reproduce:

* Install package in Milky Way v0.3 Testing

Description:

Ardour require rebuild in v0.3

Additional info:

Repositorio               : extra
Nombre                    : ardour
Versión                   : 5.8-1
Descripción               : Professional-grade digital audio workstation
Arquitectura              : x86_64
URL                       : http://ardour.org/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : liblrdf  liblo  lilv  suil  taglib  aubio  rubberband  gtkmm
Dependencias opcionales   : xjadeo: video monitoring
                            harvid: video timeline
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 8,31 MiB
Tamaño de la instalación  : 38,16 MiB
Encargado                 : Rashif Rahman (Ray) <schiv@archlinux.org>
Fecha de creación         : mié 26 abr 2017 02:45:34 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

$ ldd /usr/lib/ardour5/ardour-5.8.0 | grep 'not found'

	libardourcp.so => not found
	libcanvas.so.0 => not found
	libgtkmm2ext.so.0 => not found
	libptformat.so.0 => not found
	libardour.so.3 => not found
	libmidipp.so.4 => not found
	libevoral.so.0 => not found
	libaudiographer.so.0 => not found
	libpbd.so.4 => not found
	libtimecode.so => not found

Steps to reproduce:

* Install package in v0.3

Description:

crontab -e
/bin/sh: /usr/bin/nano: No existe el fichero o el directorio
crontab: "/usr/bin/nano" exited with status 127

Additional info:

Repositorio               : core
Nombre                    : cronie
Versión                   : 1.5.1-1.hyperbola6
Descripción               : Daemon that runs specified programs at scheduled times and related
                            tools, with logger recommendation and OpenRC support
Arquitectura              : x86_64
URL                       : https://github.com/cronie-crond/cronie/
Licencias                 : ISC
Grupos                    : Nada
Provee                    : cron
Depende de                : pam  bash  run-parts
Dependencias opcionales   : smtp-server: send job output via email
                            smtp-forwarder: forward job output to email server
                            logger: message logging support
En conflicto con          : cron
Remplaza a                : Nada
Tamaño de la descarga     : 69,08 KiB
Tamaño de la instalación  : 266,00 KiB
Encargado                 : HyperBuilder <hyperbuilder@hyperbola.info>
Fecha de creación         : mié 02 ene 2019 03:03:57 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Steps to reproduce:

* Install cronie in v0.3

Description: The currently packaged version of QtCreator is built with SystemD support, and on v0.3 no longer works.

Steps to reproduce:

• pacman -S qtcreator
• qtcreator
• All plugins fail to load
• Receive following error message:

Cannot load plugin because dependency failed to load: ProjectExplorer(4.2.2)
Reason: /usr/lib/qtcreator/plugins/libProjectExplorer.so: Cannot load library /usr/lib/qtcreator/plugins/libProjectExplorer.so:
(libsystemd.so.0: cannot open shared object file: No such file or directory)

We need to see if it is possible to build binary without libsystemd.so or remove the package.

Description:

I may be wrong for I did not migrate to 0.3 as of yet, but I think that `msmtp` has been forgotten and needs to be recompiled with `libressl`.

Please remove this report if I am mistaken.

In `/etc/logrotate.d/rsyslog`, line 5:

/usr/bin/killall -HUP /usr/bin/rsyslogd

should now read as follows:

/usr/bin/killall -HUP /usr/sbin/rsyslogd

Description: Problem with execution of “pacstrap /mnt base base-devel syslinux” from 0.3.1-chroot ISO-image with modified pacman.conf and mirrorlist for testing. There are errors for the packages “libxcrypt” and “man-pages” as both have “/usr/share/man/man3/crypt.3.gz” and “/usr”share/man/man3/crypt_r.3.gz” included.

Description: Configuration file “syslinux.cfg” under /boot/syslinux/ has to be adjusted. Problem with kernel-images loaded and the concurrent booting device is per default configured to /dev/sda3. Kernel-images are named as “linux-libre” not “linux-libre-lts”.

This issue affects on Lumina desktop environment on the current operating system in the testing stage of Milky Way 0.4 on QEMU.

Here’s what happened, I just tried clicking the screen saver on the preferences on the desktop menu–it happens nothing, and then I just tried searching xscreensaver-settings as an executable file on the terminal–unfortunately, it’s nothing there.

Can anyone fix and rebuild it properly?