I added
<quote>modules=”fs-fuse”</quote>
to /etc/conf.d/modules (and also “fuse” instead).

I looked in /var/log/rc.log and I see this line

<quote>modprobe: FATAL: Module fs-fusetun not found in directory /lib/modules/4.9.194-gnu-1-lts</quote>

It looks like modprobe added “tun” to the filename which prevents loading the module.

One can mount exfat by running commands such as “sudo modprobe fuse” and “sudo mount.exfat /dev/sdc1 /mnt/storage” but it is inconvenient.

Also, loading fuse at startup is problematic - see here:

https://issues.hyperbola.info/index.php?do=details&task_id=1433

Description:

On a system which lacks support for either the vfio kernel module, or lacks IOMMU hardware, it is no longer possible to use host USB device assignment

Additional info:
* package version(s)

# pacman -Si libvirt
Repositorio               : community
Nombre                    : libvirt
Versión                   : 3.2.0-2.hyperbola9
Descripción               : API for controlling virtualization engines
                            (openvz,kvm,qemu,xen,etc), with eudev, libressl and OpenRC support
Arquitectura              : x86_64
URL                       : https://libvirt.org/
Licencias                 : LGPL-2.1
Grupos                    : Nada
Provee                    : Nada
Depende de                : e2fsprogs  gnutls  iptables  libxml2  parted  polkit  python2
                            avahi  yajl  libpciaccess  eudev  dbus  libxau  libxdmcp  libpcap
                            libcap-ng  curl  libsasl  libgcrypt  libgpg-error  libressl
                            libxcb  gcc-libs  iproute2  libnl  libx11  numactl  gettext  ceph
                            libssh2  netcf
Dependencias opcionales   : ebtables: required for default NAT networking
                            dnsmasq: required for default NAT/DHCP for guests
                            bridge-utils: for bridged networking
                            openbsd-netcat: for remote management over ssh
                            qemu
                            radvd
                            dmidecode
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 6,93 MiB
Tamaño de la instalación  : 41,21 MiB
Encargado                 : HyperBuilder <hyperbuilder@hyperbola.info>
Fecha de creación         : vie 19 jul 2019 08:21:25 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* Patch

- https://www.redhat.com/archives/libvir-list/2017-April/msg00594.html

Steps to reproduce:

- Install package

After installing and adding it to the configuration under /etc/conf.d/modules the concurrent module won’t be loaded at all.

The daemon is not working and the following error-message occurs when trying to starting up:

cdemu: Daemon: D-Bus: failed to get proxy for 'org.freedesktop.DBus' on session bus: Cannot autolaunch D-Bus without X11 $DISPLAY!
Daemon initialization and start failed!

Hello,

I’m unable to print some pdfs on my Hyperbola 3.0 system.
Some background :

cups is installed, service enabled and working
system-config-printer is installed and my printer has been correctly added.

I can print most pdfs and text files but recently with a pdf, it fails to print it.* And system-config-printer returned the following error (see capture) :

Printer "EPSON XP-620-Series" requires the '/usr/lib/cups/filters/epson-escpr-wrapper' but it is not currently installed.

Currently, “epson-escpr-wrapper” is installed but it is in :

/usr/libexec/cups/filters/epson-escpr-wrapper

Looking at source code of system-config-printer, it expects that wrapper to be installed in “/usr/lib/” so I tried to symlink that “epson-escpr-wrapper” to “/usr/lib/cups/filters” but it doesn’t work..

*With a Debian system and the exact same configuration, the “problematic” pdf prints just fine so it is not an issue with the pdf.

rrip_gui does not work. The fix is to install cairo-gobject which is not in the repos. Attached is a working PKGBUILD adapted from the official one.

the top part of any document it opens flickers like crazy like a strobing effect. I would appreciate it if this was fixed so that it wouldn’t do that. :)

In fact, just opening a blank document does this. ;/

An example:

$ hypervideo https://soundcloud.com/moshe-feiglin/wuh9dlykfhok [soundcloud] moshe-feiglin/wuh9dlykfhok: Downloading webpage
[soundcloud] moshe-feiglin/wuh9dlykfhok: Downloading info JSON
[soundcloud] 717666847: Downloading track url
WARNING: Unable to download JSON metadata: HTTP Error 401: Unauthorized
[soundcloud] 717666847: Checking fallback video format URL [soundcloud] 717666847: fallback video format URL is invalid, skipping
ERROR: No video formats found;

                  Error: Nonfree Bytecode Required!

     It's currently impossible to download this video with DRM.

    Hypervideo protects your freedom by avoiding DRM and nonfree
                        bytecode parsing.

                            More info:

As per the source code, xdg-utils is meant to work with firefox, google-chrome, and other browsers. It is missing support for -uxp applications.

When i try to set the brightness on my screen, with xbacklight -set 100,

it does this:

No outputs have backlight property

and it doesn’t really matter if I set it lower than 100 or what it currently is at.

Fix when you can please!

It appears when I plug in my libreboot laptop x200 in, it appears to dim the screen and when its unplugged, the screen is bright again. Something peculiar is at work, I wondered if this could be fixed.

My assumption is it is related to lxdm or lightdm. Any thoughts?

I am currently using 0.4, so I don’t expect this to be a fast process, just when you get a chance okay?

Is there any way to force it to try from yt as it did in the final attempt?

$ hypervideo -f 22 https://www.youtube.com/watch?v=X7v2aHUPp14 [youtube] X7v2aHUPp14: Downloading webpage
[youtube] X7v2aHUPp14: Downloading video info webpage
[youtube] X7v2aHUPp14: Checking URL Invidious API [youtube] X7v2aHUPp14: Downloading JSON metadata
[youtube] X7v2aHUPp14: Downloading from Invidious API ERROR: unable to download video data: HTTP Error 403: Forbidden

$ hypervideo -f 22 https://www.youtube.com/watch?v=X7v2aHUPp14 [youtube] X7v2aHUPp14: Downloading webpage
[youtube] X7v2aHUPp14: Downloading video info webpage
[youtube] X7v2aHUPp14: Checking URL Invidious API [youtube] X7v2aHUPp14: Trying from YT
[download] Destination: Caroline’s First Day _ Green Wing _ Series 1 Episode 1 _ Dead Parrot-X7v2aHUPp14.mp4
[download] 100% of 418.57MiB in 03:31

(gst-plugin-scanner:17336): GStreamer-WARNING : Failed to load plugin ‘/usr/lib/gstreamer-1.0/libgstzbar.so’: libzbar.so.0: cannot open shared object file: No such file or directory
(gst-plugin-scanner:17336): GStreamer-WARNING : Failed to load plugin ‘/usr/lib/gstreamer-1.0/libgstfluidsynthmidi.so’: libfluidsynth.so.1: cannot open shared object file: No such file or directory

Repositorio : extra
Nombre : gstreamer
Versión : 1.12.0-1
Descripción : GStreamer open-source multimedia framework core library
Arquitectura : x86_64
URL : https://gstreamer.freedesktop.org/ Licencias : LGPL Grupos : Nada
Provee : Nada
Depende de : libxml2 glib2 libunwind libcap libelf
Dependencias opcionales : Nada
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 1897,45 KiB
Tamaño de la instalación : 17241,00 KiB
Encargado : Jan Alexander Steffens (heftig) jan.steffens@gmail.com Fecha de creación : jue 04 may 2017 14:13:05 -05
Validado por : Suma MD5 Suma SHA-256 Firma

So far lumina-mediaplayer is working, but lumina-screenshot has a problem to load as application. The library libQt5X11Extras.so.5 is missing when looking at the dependencies.

Description:

Ath9k wifi device not working, possibly bad compilation or issues with gcc

Additional info:
* package version(s)

- gcc-8.4.0-2
- ath9k-htc-firmware-1.4.0-8

* config and/or log files etc.

[    8.302952] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[    8.303011] usbcore: registered new interface driver ath9k_htc
[    8.303067] usb 1-1: Direct firmware load for ath9k_htc/htc_9271-1.4.0.fw failed with error -2
[    8.303073] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[    8.623141] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51008
[    9.683657] ath9k_htc 1-1:1.0: ath9k_htc: Target is unresponsive
[    9.683672] ath9k_htc: Failed to initialize the device

Steps to reproduce:

- Add wifi device with ath9k firmware, for example: TL-WN722N
- pacman -S ath9k-htc-firmware

References:

- https://bugzilla.kernel.org/show_bug.cgi?id=208251

doesn’t work automatically, not sure why, but then again, I just reset it using openrc, like this...

doas rc-service sndiod restart

Then it works again, although this bug doesn’t happen on all my Hyperbola 0.4 laptops, which is odd...

For most of my laptops it works automatically, but one of them it doesn’t, might be misconfigured maybe? Idk...

Anywho, I am curious if anyone else has the same problem.

Description:
after install the package, select language, choose other language and the language no change

Additional info:
* package version(s) : Battle for Wesnoth v1.14.15
* config and/or log files etc. ↓

[ user | 2021-11-05 | 07:31 ]
[/home/user] [0]
$ wesnoth
Battle for Wesnoth v1.14.15
Started on Fri Nov 5 07:32:01 2021

Data directory: /usr/share/games/wesnoth
User configuration directory: /home/USER/.config/wesnoth
User data directory: /home/USER/.local/share/wesnoth/1.14
Cache directory: /home/USER/.cache/wesnoth

Setting mode to 1366×768 Checking lua scripts... ok
20211105 07:32:12 warning general: setlocale() failed for ‘it_IT’.
20211105 07:32:12 warning general: setlocale() failed for ‘it_IT’.

Steps to reproduce:
Install, run, select new language, and find, the language no change

Attach image log

Description:
Unresolved dependiencies

Additional info:
* package version(s)

$ doas pacman -Si surf
Repository      : extra
Name            : surf
Version         : 2.1-1
Description     : A simple web browser based on WebKit/GTK+.
Architecture    : x86_64
URL             : https://surf.suckless.org/
Licenses        : Expat
Groups          : None
Provides        : None
Depends On      : webkitgtk  gcr  xenocara-xprop
Optional Deps   : dmenu: URL-bar
                  ca-certificates: SSL verification
                  xterm: default download handler
                  curl: default download handler
Conflicts With  : None
Replaces        : None
Download Size   : 26.06 KiB
Installed Size  : 134.00 KiB
Packager        : HyperBuilder <hyperbuilder@hyperbola.info>
Build Date      : Fri Jul 9 21:49:07 2021
Validated By    : MD5 Sum  SHA-256 Sum  Signature

* config and/or log files etc.

$ doas pacman -S surf
resolving dependencies...
warning: cannot resolve "libfdk-aac", a dependency of "gst-plugins-bad"
warning: cannot resolve "gst-plugins-bad", a dependency of "webkitgtk"
warning: cannot resolve "webkitgtk", a dependency of "surf"
:: The following package cannot be upgraded due to unresolvable dependencies:
      surf

:: Do you want to skip the above package for this upgrade? [y/N] 
error: failed to prepare transaction (could not satisfy dependencies)
:: gst-plugins-bad: requires libfdk-aac
:: webkitgtk: requires gst-plugins-bad
:: surf: requires webkitgtk

Steps to reproduce:

dmesg was showing errors about this
Apparently it is not needed and can be deleted. (No errors on my side after deletion (and reboot) and no more errors message)

See this thread : https://forum.manjaro.org/t/openrc-and-73-seat-late-rules-why-deleting-it-was-a-good-thing/24599

I cannot start qemu (2.9.0-1) on latest hyperbola stable release.

Error message : qemu-system-x86_64: error while loading shared libraries: libseccomp.so.2

Thanks for your help

Hello,

When running lightdm-gtk-greeter-settings-pkexec as user.

lightdm-gtk-greeter-settings-pkexec 
==== AUTHENTICATING FOR com.ubuntu.pkexec.lightdm-gtk-greeter-settings ===
Authentication is required to run Settings editor for LightDM GTK+ Greeter
Authenticating as: root
polkit-agent-helper-1: pam_authenticate failed: Permission denied
==== AUTHENTICATION FAILED ===
Error executing command as another user: Not authorized

This incident has been reported.

Am I missing something ? Thanks for your help

groups for my username : sys disk wheel network video audio optical storage libvirt kvm users

Hello,

gparted_polkit doesn’t work, error message (polkit is installed on my system)

Error executing command as another user: No authentication agent found.

If using :

sudo gparted

or

gksu gparted

It works. By default with xfce, the gparted launcher uses gparted_polkit though.

Thanks for your help

Hello,

I can’t install blender.

Error message :

erreur : opencollada: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/opencollada-1.6.45-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : ptex: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/ptex-2.1.28-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : openimageio: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/openimageio-1.6.18-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : openshadinglanguage: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid

Already tried to refresh hyperbola keyring with :

pacman-key --populate hyperbola
pacman-key --refresh-keys
pacman -Sy hyperbola-keyring

Thanks for your help

After installation, none of the addons is present in Kodi!