|
Any | Bug Report | High | Critical | [zathura-ps] needs to be recompiled | Closed | |
Task Description
Description: Since the update to 0.3.9 (or the update of girara to 0.2.9), zathura-pdf-poppler returns the following error:
error: Could not load plugin '/usr/lib/zathura/ps.so' (libgirara-gtk3.so.2: cannot open shared object file: No such file or directory).
|
|
Any | Bug Report | High | Critical | [links][elinks] segmentation fault after start by termi ... | Closed | |
Task Description
Description:
Additional info: * package version(s)
links 2.14-2
elinks 0.13-18
* config and/or log files etc.
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff4295e43 in strchrnul () from /usr/lib/libc.so.6
[New Thread 0x7ffff4dfb700 (LWP 8393)]
Thread 1 "elinks" received signal SIGSEGV, Segmentation fault.
0x00007ffff5fa3e43 in strchrnul () from /usr/lib/libc.so.6
Steps to reproduce:
|
|
Any | Bug Report | Medium | Medium | [iceweasel-uxp] animated webp files stop playing after ... | Closed | |
Task Description
I converted a gif file to webp using gif2webp. The file plays back using vwebp but stops playing back after a few seconds when run in Iceweasel-UXP.
Here is a file you can test (made from Sintel): https://coinsh.red/p/sintel.webp
|
|
Any | Bug Report | Very Low | Critical | [apache]: cannot start if NetworkManager is not started | Closed | |
Task Description
Description:
Apache web server shall be running with or without the external network, and without NetworkManager.
rc-service httpd start
will give the message that NetworkManager must be started first, and will not start apache web server. I cannot find in which file is that written.
Steps to reproduce:
1. Disconnect network. Start computer.
2. Try to start apache with above command.
That makes no sense, as Apache can run on local network without NetworkManager and it is not written in the description.
|
|
Any | Bug Report | Low | Low | [emacs-nox] uses "nox" suffix | Closed | |
Task Description
Description:
Additional info: * package version(s)
* config and/or log files etc.
Steps to reproduce:
|
|
Any | Bug Report | Very Low | High | [nginx]: cannot start if NetworkManager is not started | Closed | |
Task Description
Description:
Nginx web server shall be running with or without the external network, and without NetworkManager.
rc-service nginx start
Additional info:
$ pacman -Si nginx
Repositorio : extra
Nombre : nginx
Versión : 1.12.2-2.hyperbola4
Descripción : Lightweight HTTP server and IMAP/POP3 proxy server, with logger recommendation and OpenRC support
Arquitectura : x86_64
URL : https://nginx.org
Licencias : custom
Grupos : Nada
Provee : Nada
Depende de : pcre zlib openssl geoip
Dependencias opcionales : logger: message logging support
En conflicto con : nginx-mainline
Remplaza a : nginx-mainline
Tamaño de la descarga : 478,89 KiB
Tamaño de la instalación : 1598,00 KiB
Encargado : André Silva <emulatorman@hyperbola.info>
Fecha de creación : lun 11 jun 2018 18:20:12 -05
Validado por : Suma MD5 Suma SHA-256 Firma
$ pacman -Ql nginx
nginx /etc/
nginx /etc/conf.d/
nginx /etc/conf.d/nginx
nginx /etc/init.d/
nginx /etc/init.d/nginx
nginx /etc/logrotate.d/
nginx /etc/logrotate.d/nginx
nginx /etc/nginx/
nginx /etc/nginx/fastcgi.conf
nginx /etc/nginx/fastcgi_params
nginx /etc/nginx/koi-utf
nginx /etc/nginx/koi-win
nginx /etc/nginx/mime.types
nginx /etc/nginx/nginx.conf
nginx /etc/nginx/scgi_params
nginx /etc/nginx/uwsgi_params
nginx /etc/nginx/win-utf
nginx /usr/
nginx /usr/bin/
nginx /usr/bin/nginx
nginx /usr/share/
nginx /usr/share/licenses/
nginx /usr/share/licenses/nginx/
nginx /usr/share/licenses/nginx/LICENSE
nginx /usr/share/man/
nginx /usr/share/man/man8/
nginx /usr/share/man/man8/nginx.8.gz
nginx /usr/share/nginx/
nginx /usr/share/nginx/html/
nginx /usr/share/nginx/html/50x.html
nginx /usr/share/nginx/html/index.html
nginx /usr/share/vim/
nginx /usr/share/vim/vimfiles/
nginx /usr/share/vim/vimfiles/ftdetect/
nginx /usr/share/vim/vimfiles/ftdetect/nginx.vim
nginx /usr/share/vim/vimfiles/indent/
nginx /usr/share/vim/vimfiles/indent/nginx.vim
nginx /usr/share/vim/vimfiles/syntax/
nginx /usr/share/vim/vimfiles/syntax/nginx.vim
nginx /var/
nginx /var/lib/
nginx /var/lib/nginx/
nginx /var/lib/nginx/proxy/
nginx /var/log/
nginx /var/log/nginx/
Steps to reproduce:
1. Disconnect network. Start computer.
2. Try to start nginx with above command.
|
|
Any | Bug Report | High | High | [filesystem] contains systemd references and files | Closed | |
Task Description
Description:
Additional info: * package version(s) * config and/or log files etc.
diff --git hyperbola.7.txt hyperbola.7.txt.new
index 842e532..927cf6a 100644
--- hyperbola.7.txt
+++ hyperbola.7.txt.new
@@ -24,14 +24,12 @@ To view available services, use 'rc-status --all'.
HOSTNAME[[H]]
-------------
-The hostname of the machine can be set using 'hostnamectl set-hostname <hostname>'.
+The hostname of the machine can be set using 'hostname <hostname>' or 'sysctl -w kernel.hostname=<hostname>'.
It will then be written to /etc/hostname.
LOCALIZATION[[L]]
-----------------
Various locales may be enabled in /etc/locale.gen and are generated by 'locale-gen'.
-The system-wide locale to be used can be configured in /etc/locale.conf.
-These settings can be overridden on a per-user basis by keeping a user-specific locale.conf in $HOME/.config/locale.conf.
The user-specific file will take precedence if it exists.
VIRTUAL CONSOLE[[V]]
@@ -72,15 +70,16 @@ Syslinux is configured in /boot/syslinux/syslinux.cfg.
MODULES[[M]]
------------
Most modules should be loaded on-demand.
-Modules to be unconditionally loaded at boot can be specified in /etc/modules-load.d/,
+Modules to be unconditionally loaded at boot can be specified in /etc/conf.d/modules,
and modules to be blacklisted from automatically loading can be configured in /etc/modprobe.d/.
SEE ALSO
--------
-*hostname*(5), *locale.conf*(5), *timezone*(3), *hwclock*(8),
-*fstab*(5), *crypttab*(5), *mkinitcpio*(8), *pacman*(8), *pacman.conf*(5),
-*grub-mkconfig*(8), *syslinux*(1), *modules-load.d*(5), *modprobe.d*(5)
+*hostname*(5), *timezone*(3), *hwclock*(8),
+*fstab*(5), *cryptsetup*(8), *mkinitcpio*(8), *pacman*(8), *pacman.conf*(5),
+*grub-mkconfig*(8), *syslinux*(1), *modprobe.d*(5),
+*openrc*(8), *rc-service*(8), *rc-status*(8), *rc-update*(8)
AUTHORS
-------
Steps to reproduce:
* Run:
~ man hyperbola
|
|
Any | Bug Report | Very High | High | [mkinitcpio] consolefont and keymap hooks is adapted to ... | Closed | |
Task Description
Description:
Additional info:
/usr/lib/initcpio/install/consolefont
---
- [[ -s /etc/vconsole.conf ]] && . /etc/vconsole.conf
+ [[ -s /etc/conf.d/consolefont ]] && . /etc/conf.d/consolefont
- if [[ $FONT ]]; then
- for file in "/usr/share/kbd/consolefonts/$FONT".@(fnt|psf?(u))?(.gz); do
+ if [[ $consolefont ]]; then
+ for file in "/usr/share/kbd/consolefonts/$consolefont".@(fnt|psf?(u))?(.gz); do
- error "consolefont: requested font not found: \`%s'" "$FONT"
+ error "consolefont: requested font not found: \`%s'" "$consolefont"
-This hook loads consolefont specified in vconsole.conf during early
-userspace.
+This hook loads consolefont specified in /etc/conf.d/consolefont during
+early userspace.
/usr/lib/initcpio/install/keymap
---
- for cfg in /etc/{vconsole,locale}.conf; do
+ for cfg in /etc/{conf.d/keymaps,locale}.conf; do
- loadkeys -q $uc ${KEYMAP:-us} -b > "$BUILDROOT/keymap.bin"
+ loadkeys -q $uc ${keymap:-us} -b > "$BUILDROOT/keymap.bin"
-This hook loads keymap(s) specified in vconsole.conf during early
-userspace.
+This hook loads keymap(s) specified in /etc/conf.d/keymaps during
+early userspace.
Repository : core
Name : mkinitcpio
Version : 23-1.hyperbola3.1
Description : Modular initramfs image creation utility, with eudev support
Architecture : any
URL : https://projects.archlinux.org/mkinitcpio.git/
Licenses : GPL
Groups : None
Provides : None
Depends On : awk mkinitcpio-busybox>=1.19.4-2 kmod util-linux>=2.23 libarchive coreutils bash findutils grep filesystem>=2011.10-1 gzip eudev
Optional Deps : xz: Use lzma or xz compression for the initramfs image
bzip2: Use bzip2 compression for the initramfs image
lzop: Use lzo compression for the initramfs image
lz4: Use lz4 compression for the initramfs image
mkinitcpio-nfs-utils: Support for root filesystem on NFS
Conflicts With : None
Replaces : None
Download Size : 38.40 KiB
Installed Size : 186.00 KiB
Packager : André Silva <emulatorman@hyperbola.info>
Build Date : Fri 05 Oct 2018 03:28:32 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature
Steps to reproduce:
|
|
Any | Bug Report | Medium | Medium | [hypervideo] remove "please report this issue" when hyp ... | Closed | |
Task Description
Description:
The error is intentional when hypervideo fail to download DRM videos, so the specific part that says “please report this issue on https://issues.hyperbola.info/“ should be removed in the next version.
Additional info: * package version(s)
* config and/or log files etc.
Steps to reproduce:
|
|
Any | Bug Report | Medium | Medium | [linux-libre-lts] enable CONFIG_USER_NS | Closed | |
Task Description
Currently it’s not possible to enable “noroot” in firejail due to missing CONFIG_USER_NS in the kernel. This is a bug also in Arch. https://github.com/netblue30/firejail/issues/1069
|
|
Stable | Bug Report | Medium | High | [tp_smapi] not working with most recent libre kernel | Closed | |
Task Description
Description: tp_smapi fails to load
Additional info: * package version(s) tp_smapi-lts 0.43-1.hyperbola29.5 linux-libre-lts 4.9.143_gnu-0
* config and/or log files etc. From dmesg: thinkpad_ec: Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0) thinkpad_ec: Unknown symbol __x86_indirect_thunk (err 0)
Steps to reproduce: 1. Install tp_smapi and the most recent stable linux-libre-lts 2. Reboot 3. sudo modprobe tp_smapi
|
|
Any | Bug Report | Very High | Critical | [linux-libre-lts] spinlock not released on kernel by i9 ... | Closed | |
Task Description
Description:
With the latest release of the kernel, xwindow does not start anymore. I had to revert to 4.9.143.
Additional info: * package version(s): linux-libre-lts-4.9.150_gnu-0-x86_64.pkg.tar.xz
Steps to reproduce:
Upgrade to the following: - linux-libre-lts-4.9.150_gnu-0-x86_64.pkg.tar.xz - linux-libre-lts-headers-4.9.150_gnu-0-x86_64.pkg.tar.xz - acpi_call-lts-1.1.0-42.hyperbola34.6-x86_64.pkg.tar.xz
And try to start xwindow
|
|
Any | Bug Report | Low | High | [xfce4-power-manager] locking session issue | Closed | |
Task Description
I probably should’ve mentioned this before, but if it is set to suspend when lid is closed, it should automatically lock. if the security option: lock screen with system is set to sleep is tweaked on it doesn’t lock always.
This is word for word what I wrote in the forums, but yeah... it is a problem say if someone wants to use your laptop without your permission and can do so.
But it is also a problem if you set it to lock instead because it is more prone to overheating when your not using it, and it doesn’t suspend quickly enough.
I have tried this many times and the same story can be told, again and again.
I think this issue should be considered high or critical merely because of the privacy risk if someone gets their hands on your laptop while its on. Even if you have been away... :/
I wonder if anyone else has this issue... well you guys will tell me I am sure. if critical doesn’t match what you think I am sure you will change it. ;)
|
|
Stable | Bug Report | Very Low | Medium | [kodi] "The Movie Database" scraper doesn't work | Closed | |
Task Description
With kodi 17.1-2.hyperbola1 “The Movie Database” scraper doesn’t work. The error message is :
"Unable to connect to remote server"
|
|
Any | Bug Report | Very High | Critical | [electrum] package no longer works | Closed | |
Task Description
Old clients (like the one packages by Hyperbola) no longer work due to changes in Electrum:
https://github.com/kyuupichan/electrumx/pull/760
The fix is to use a newer version.
|
|
Any | Bug Report | High | Critical | [electrum] updated package still does not work | Closed | |
Task Description
Here is the terminal output:
$ electrum Error: No module named ‘aiorpcx’. Try ‘sudo python3 -m pip install <module-name>
I think a newer python version (e.g. 3.7) might be needed in order to get it to work as well as even after installing missing modules via pip locally the package does not run.
|
|
Any | Bug Report | Very Low | Medium | [hypervideo] YouTube no longer works | Closed | |
Task Description
When trying to download a video I get a token error.
Here is an example:
$ hypervideo https://www.youtube.com/watch?v=-2KJ-g-QgMk[youtube] -2KJ-g-QgMk: Downloading webpage [youtube] -2KJ-g-QgMk: Downloading video info webpage ERROR: -2KJ-g-QgMk: “token” parameter not in video info for unknown reason;
|
|
Any | Bug Report | Medium | Medium | [adwaita-icon-theme] error when installing package | Closed | |
Task Description
Install the base system again in a pc, but when installing some packages there is the error that I describe below. I would ask please correct this problem since you can not install several programs, example: emacs, volumeicon, etc
invalid or corrupted package (PGP signature)). error: adwaita-icon-theme: signature from “scott sradms0@openmailbox.org” is unknown trust :: File /var/cache/pacman/pkg/adwaita-icon-theme-3.24.0-1.hyperbola1-any.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
|
|
Testing | Bug Report | Medium | Medium | [ntop] useradd: the group "ntop" does not exist | Closed | |
Task Description
Description:
During the installation, a group error message is displayed.
Additional info: * package version(s)
$ pacman -Si ntop
Repositorio : community
Nombre : ntop
Versión : 5.0.1-11.hyperbola3
Descripción : A network traffic probe that shows the network usage, with libressl and OpenRC support
Arquitectura : x86_64
URL : https://www.ntop.org/
Licencias : GPL-3
Grupos : Nada
Provee : Nada
Depende de : libevent libpcap gd glibc libxml2 libressl rrdtool pcre geoip lua python2
Dependencias opcionales : Nada
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 21,33 MiB
Tamaño de la instalación : 48,51 MiB
Encargado : HyperBuilder
<hyperbuilder@hyperbola.info>
Fecha de creación : mié 27 mar 2019 17:09:11 -05
Validado por : Suma MD5 Suma SHA-256 Firma
* config and/or log files etc.
$ ntop
Thu Jul 18 19:53:19 2019 Initializing gdbm databases
Thu Jul 18 19:53:19 2019 **ERROR** ....open of /var/lib/ntop/prefsCache.db failed: File open error
Thu Jul 18 19:53:19 2019 Possible solution: please use '-P <directory>'
Thu Jul 18 19:53:19 2019 **FATAL_ERROR** GDBM open failed, ntop shutting down...
Thu Jul 18 19:53:19 2019 CLEANUP[t140566150068416]: ntop caught signal 2 [state=2]
Thu Jul 18 19:53:19 2019 ntop is now quitting...
Steps to reproduce:
* Install package in Milky Way v0.3 Testing
|
|
Testing | Bug Report | Medium | Medium | [ardour] require re-build | Closed | |
Task Description
Description:
Ardour require rebuild in v0.3
Additional info:
Repositorio : extra
Nombre : ardour
Versión : 5.8-1
Descripción : Professional-grade digital audio workstation
Arquitectura : x86_64
URL : http://ardour.org/
Licencias : GPL
Grupos : Nada
Provee : Nada
Depende de : liblrdf liblo lilv suil taglib aubio rubberband gtkmm
Dependencias opcionales : xjadeo: video monitoring
harvid: video timeline
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 8,31 MiB
Tamaño de la instalación : 38,16 MiB
Encargado : Rashif Rahman (Ray) <schiv@archlinux.org>
Fecha de creación : mié 26 abr 2017 02:45:34 -05
Validado por : Suma MD5 Suma SHA-256 Firma
$ ldd /usr/lib/ardour5/ardour-5.8.0 | grep 'not found'
libardourcp.so => not found
libcanvas.so.0 => not found
libgtkmm2ext.so.0 => not found
libptformat.so.0 => not found
libardour.so.3 => not found
libmidipp.so.4 => not found
libevoral.so.0 => not found
libaudiographer.so.0 => not found
libpbd.so.4 => not found
libtimecode.so => not found
Steps to reproduce:
* Install package in v0.3
|
|
Testing | Bug Report | Medium | Critical | [rsyslog] wrong reference to /usr/bin/rsyslog in /etc/l ... | Closed | |
Task Description
In `/etc/logrotate.d/rsyslog`, line 5:
/usr/bin/killall -HUP /usr/bin/rsyslogd
should now read as follows:
/usr/bin/killall -HUP /usr/sbin/rsyslogd
|
|
Any | Bug Report | Very High | Critical | [cups] [cups-filters] ServerBin directory inconsistency | Closed | |
Task Description
As the default path of the ServerBin directory is now /usr/libexec/bin: 1. cups-files.conf should be modified/adapted accordingly. 2. The contents of /usr/lib/cups which is currently owned by cups-filters, cups-pdf foomatic-db-engine and smbclient should be moved to /usr/libexec/cups.
As it is, cups doesn’t work in v0.3.
|
|
Stable | Bug Report | Medium | Critical | [mkinitcpio] crc32c_generic module missing with regular ... | Closed | |
Task Description
With latest 0.3 hyperbola, with the (simple) following partitioning :
/ (ext4)
/swap
The standard HOOK in /etc/mkinitcpio.conf
"HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
fails to include crc32c_generic module, resulting in non bootable system.
The generated fallback initramfs include it though.
The issue was not present with 0.2.9, with the exact same partitioning.
|
|
Stable | Bug Report | Medium | Critical | [virt-manager] Failed to initialize a valid firewall ba ... | Closed | |
Task Description
[virt-manager] Failed to initialize a valid firewall backend
I cannot start any virtual machine with current virt-manager. The error message is the following :
Failed to initialize a valid firewall backend
My username is in “kvm” group.
The only modification to the libvirt config files I made are in /etc/libvirt/qemu.conf
[...]
# Some examples of valid values are:
#
# user = "qemu" # A user named "qemu"
# user = "+0" # Super user (uid=0)
# user = "100" # A user named "100" or a user with uid=100
#
#user = "root"
user = "david"
[...]
The libvirtd service is enabled (and start without error) Also, the optional dependencies are correctly installed :
ebtables: required for default NAT networking [installed]
dnsmasq: required for default NAT/DHCP for guests [installed]
bridge-utils: for bridged networking [installed]
This was working fine previously (with 0.2.9) so I don’t know why this isn’t working anymore. As said previously, my config hasn’t changed.
|
|
Stable | Bug Report | Medium | Critical | [v4l-utils] Error in `dvbv5-scan': double free or corru ... | Closed | |
Task Description
With : v4l-utils 1.12.3-1.hyperbola1
dvb5-scan utility currently segfaults with rtl2832
*** Error in `dvbv5-scan': double free or corruption (fasttop): 0x000000000090be90 ***
======= Backtrace: =========
/lib/libc.so.6(+0x727ad)[0x7f4f9a9657ad]
/lib/libc.so.6(+0x78e6f)[0x7f4f9a96be6f]
/lib/libc.so.6(+0x796ce)[0x7f4f9a96c6ce]
/usr/lib/libdvbv5.so.0(free_dvb_dev+0x13)[0x7f4f9acafa53]
/usr/lib/libdvbv5.so.0(dvb_dev_free_devices+0x28)[0x7f4f9acafaf8]
/usr/lib/libdvbv5.so.0(dvb_dev_free+0x4e)[0x7f4f9acafe2e]
dvbv5-scan[0x401729]
/lib/libc.so.6(__libc_start_main+0xf1)[0x7f4f9a9135a1]
dvbv5-scan[0x4019fa]
This seems to have been fixed, see :
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=859008
I don’t know if a patch is available for it though..
|
|
Stable | Bug Report | Medium | Critical | [lynis] Unable to run audit on remote target because of ... | Closed | |
|
|
Stable | Bug Report | High | Critical | [gufw] FileNotFoundError: [Errno 2] '/usr/sbin/ufw': ' ... | Closed | |
|
|
Any | Bug Report | Medium | High | [cups] lp command no longer works | Closed | |
|
|
Stable | Bug Report | Very Low | High | [ebtables] require rebuild | Closed | |
|
|
Any | Bug Report | Medium | High | [libvirt] USB device passthrough can't be used due to ... | Closed | |
|
|
Stable | Bug Report | Medium | Medium | [ipython2] broken | Closed | |
|
|
Stable | Bug Report | Medium | Critical | [apache][modules][FHS] move external modules to new loc ... | Closed | |
|
|
Stable | Bug Report | Medium | Critical | [roundcubemail-lts] not compatible with PHP 7.1 | Closed | |
|
|
Stable | Bug Report | Very Low | Medium | [fail2ban] remove systemd integration | Closed | |
|
|
Stable | Bug Report | Very Low | High | [nftables] init service ERROR: nftables failed to start | Closed | |
|
|
Any | Bug Report | Very Low | Medium | [abiword] flickers | Closed | |
|
|
Any | Bug Report | Low | Low | [xdg-utils] doesn't work with -uxp applications and has ... | Closed | |
|
|
Stable | Bug Report | Very Low | Critical | [gtk-2] Severe problems with GTK2-applications | Closed | |
|
|
Testing | Bug Report | Very Low | Critical | [Hyperbola GNU/Linux-libre 0.4] Installation issue for ... | Closed | |
|
|
Testing | Bug Report | High | Critical | [Hyperbola GNU/Linux-libre 0.4] Installation for syslin ... | Closed | |
|
|
Any | Bug Report | Very Low | Low | [Hyperbola GNU/Linux-libre 0.4] Testing Lumina - lumina ... | Closed | |
|
|
Testing | Bug Report | High | Critical | [wpa_supplicant]: wireless connection does not work | Closed | |
|
|
Any | Bug Report | Very Low | Medium | sndio doesn't autostart on all my comps... | Closed | |
|
|
Testing | Bug Report | Very High | Critical | [Hyperbola GNU/Linux 0.4] QtSSL is not working | Closed | |
|
|
Testing | Bug Report | Medium | Medium | [Hyperbola GNU/Linux-libre 0.4] - Package [android-file ... | Closed | |
|
|
Testing | Bug Report | Very Low | High | [Hyperbola GNU/Linux-libre 0.4] Video driver issues wit ... | Closed | |
|
|
Testing | Bug Report | Very Low | High | espeak no works | Closed | |
|
|
Any | Drop Request | Low | Low | [gegl02] remove unmaintained version of GEGL | Closed | |
|
|
Any | Drop Request | Low | Low | [nginx-mainline] remove unstable and duplicated package | Closed | |
|
|
Any | Drop Request | Low | Low | [libreoffice-fresh*] remove unstable and duplicated pac ... | Closed | |
|