Packages

Description:
Screen locking does not work in GNOME, either with keyboard shortcuts or from the menu, while using LightDM.

Additional info:
* According to this thread[1] this bug has been patched in Ubuntu. Please consider applying this patch.[2]

Steps to reproduce:
# pacman -S gnome lightdm lightdm-gtk-greeter
# rc-update add lightdm default
Reboot, log in to a GNOME session and attempt to lock screen.

[1] https://www.reddit.com/r/gnome/comments/9klvej/is_there_a_way_to_get_the_screen_to_lock_with/ [2] https://git.launchpad.net/~ubuntu-desktop/ubuntu/+source/gnome-shell/tree/debian/patches/ubuntu/lightdm-user-switching.patch

The association issue can be awkward as the applications are related with the bank. Thusly, if you can’t send cash from Paypal to Cash App in light of the association issue then you can notice a couple of chronicles to find the screw up and sort it out. You have another decision to contact uphold for help.
https://www.cashapp-customerservice.com/blog/send-money-from-paypal-to-cash-app/

Epson printer offline is the most common issue users might face. This error basically occurs due to low network, USB cable not connected properly, etc. I am a technician and have received this complaint from various customers. However, I have been tackling such issues from the past many years. This [https://www.epsonprintersupportnumber.com/blog/how-to-bring-an-offline-epson-printer-online/ Epson printer offline problem]] can easily be solved with a few steps. In case, you are also facing this error then you can get in touch with me. Your issue can be resolved instantly. I have high experience in the technical field and have been sorting out the issues of printer customers on a daily basis. If you want the instant fixing solution you can anytime connect with me and convey your printer issue. There is no restricted time and you can contact me anytime, 24*7. All you need to do is share the correct details of your printer model. You will instantly receive the fixing solution.

Epson printer offline is the most common issue users might face. This error basically occurs due to low network, USB cable not connected properly, etc. I am a technician and have received this complaint from various customers. However, I have been tackling such issues from the past many years. This [https://www.epsonprintersupportnumber.com/blog/how-to-bring-an-offline-epson-printer-online | Epson printer offline problem]] can easily be solved with a few steps. In case, you are also facing this error then you can get in touch with me. Your issue can be resolved instantly. I have high experience in the technical field and have been sorting out the issues of printer customers on a daily basis. If you want the instant fixing solution you can anytime connect with me and convey your printer issue. There is no restricted time and you can contact me anytime, 24*7. All you need to do is share the correct details of your printer model. You will instantly receive the fixing solution.

I am into a critical accounting situation because I am encountering QuickBooks error 6147. This error code is taking place, while I am attempting to restore a company file backup. I am experiencing this accounting mistake, so I am unable to work on my accounting software. Really, I don’t have actual reasons for it, so I am trying to know about all the causes. I don’t have a clear explanation about this error code. I have taken expert’s help, but all solutions are not useful. Can anyone suggest me the permanent fixes for resolving QuickBooks error 6147?QuickBooks Error 6147

this would be appreciated greatly, although I am in no hurry.

this package is under gpl3. It is the most reasonable chess game because it can be easy or hard depending on your preference.

It happened already with minetest and again with prosody: When trying to build own packages with makepkg there are patches downloaded from the Debian-project. But the given HTTP(S)-sources are no longer available, concrete example within prosody to be found: https://deb.debian.org/debian/pool/main/p/prosody/prosody_0.10.2-1~bpo9+1.debian.tar.xz (not available)

Please don’t rely on those external sources when creating PKGBUILD-files or just give users the possibility for a secure and granted download. Therefore I cannot build prosody on my own now!

Seeing the cash app card balance is easy and quick. Are you getting an issue in knowing the balance? But, you need to ask your technical queries to the team of professionals for immediate technical guidance. Get a quick fix of every problem with the cash app by connecting with us.

https://www.cashapp-customerservice.com/blog/check-balance-on-cash-app-card/

Description:

I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.

Who can help me, not to mount a device during boot?

If you have contacted the merchant and are unable to complete the transaction, you may file a dispute. To file a cash app dispute for a credit card transaction, you must select a transaction in the Cash Request. Therefore, select Essential Help and Application Support for Cash. Dispute resolves this transaction. You can visit our website for technical support related to the money app.

https://www.cashapp-customerservice.com/blog/can-i-dispute-a-cash-app-payment/

You will see this code on the control panel of the printer while you are trying to scan. It might show up when you try to scan some heavy book or documents. There is no need to worry as you can fix it easily by following these simple steps from 123.hp.com/setup:

• Turn on the printer and wait till it is in an idle state

• Remove the printer from the power supply and wait for a minute or so

• Plug the cables back and reconnect the power cord utility to the back part of the printer and switch it on

• Let it pass through the warm up stage and wait till the light on the printer blinks. This will fix the issue and try putting one sheet at a time in the scanner

If you still face any issue then just visit 123.hp.com/setup and get help instantly from the experts.

Description:
The Bitwarden native desktop application. It seems with Iceweasel-UXP doesn’t have the Add-on available.

Additional info:
* package version(s)
v1.7.0

https://github.com/bitwarden/desktop/releases

I would like this, because, it looks even better than xfce4. It does use an older qt3 though, BUT, they are maintaining QT3 and improving it themselves.

Plus, its more lightweight than xfce4 and maybe even lxqt too without looking like crap like lxqt and yet still is better than a WM.

I know you don’t like stuff that is abandonware in any sense, but given its being maintained, I hope you will add it.

But let me know.

https://aur.archlinux.org/packages/linux-mptcp/

Kernel Patch for 4.9 :
http://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch

Compile :
https://multipath-tcp.org/pmwiki.php/Users/DoItYourself

https://github.com/loh-tar/wpa-cute/releases

I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.

I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)

or 2019 january. :)

WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:

https://wiki.archlinux.org/index.php/Wpa_supplicant:

Password-related problems

wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.

In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:

# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf

In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed.
Problems with eduroam and other MSCHAPv2 connections

This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.

but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.

It says it cannot get the status of wpa_supplicant when I load it.

This could be an issue if you get rid of NetworkManager for some users.

So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)

Description:
Was wondering if there is any issue in terms of freedom andor privacy for the inclusion of elogind? Feedback will be apreciated Cheers.

this was recently implemented in gentoo.

source:
https://libregit.org/i3_relativism/elogind

references:
https://blogs.gentoo.org/leio/2019/03/26/gnome-3-30/#comment-9555 https://forums.gentoo.org/viewtopic-t-1094796.html

contact gentoo developer for help in implementation:
https://wiki.gentoo.org/wiki/User:Leio/TODO