Packages

Add “nut” package.

Useful for uninterruptible power supplies, power distribution units, solar controllers and servers power supply units.

dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:

* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
Device foobar-pv is still in use                                              [ !! ]

admin→ gimp IMG_20170909_153350828.jpg
GEGL-Message: Module ‘/usr/lib/gegl-0.3/lens-correct.so’ load error: liblensfun.so.1: cannot open shared object file: No such file or directory
GEGL-Message: Module ‘/usr/lib/gegl-0.3/matting-levin.so’ load error: libumfpack.so.5: cannot open shared object file: No such file or directory

(gimp:12519): GLib-GObject-WARNING **: g_object_set_valist: object class ‘GeglConfig’ has no property named ‘cache-size’

Those are errors I get when running Gimp.

Description:

community/gufw 17.04.1-3
     Uncomplicated way to manage your Linux firewall

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:
“About Iceweasel-UXP” window contains some minor issues to be fixed:

• “Iceweasel-UXP” instead of “Iceweasel” because we are a different project.
• “Hyperbola Project” instead of “the Hyperbola Project” as link to point to Hyperbola site.
• “for Iceweasel-UXP application” instead of “for Iceweasel rebranding” because we are maintaining an entire application, not just rebranding.

Additional info:
* package version(s): 52.9.0_20180601-3

Steps to reproduce:
Go to Help > About Iceweasel-UXP

recaptcha is not working on webchat.freenode.net (and probably other websites) with iceweasel-uxp (was working fine with iceweasel-esr)

https://framapic.org/ZdvYH2JCM39J/HFDSI7z0hXvS.png

Description:

A nice Git service would be welcomed in our pacman.

- https://github.com/go-gitea/gitea

- https://www.archlinux.org/packages/community/x86_64/gitea/

Description:

I ran sensors-detect, it detected two modules :

coretemp
it87

Those have been added to /etc/sysconfig/lm_sensors :

# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
# The format of this file is a shell script that simply defines variables:
# HWMON_MODULES for hardware monitoring driver modules, and optionally
# BUS_MODULES for any required bus driver module (for example for I2C or SPI).

HWMON_MODULES="coretemp it87"

But only coretemp is loaded at boot.

I can manually load it87 module (modprobe it87) and get all sensors working but for some reason it87 module is not loaded at boot.

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:

07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.

After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

There appears to be a bug with the current version of ufw, 0.35-2

Dunno if updating it would fix it, but it is kind of annoying and possibly security issue.

it says ufw is inactive when I reboot despite it being installed in the runlevel.

Similar to systemd, pulseaudio or libpulse is forced upon users as many packages require it such as kodi, gnome-shell (and thus also gdm), ffmpeg, gst-plugins-good, simplescreenrecorder, clementine, empathy, seamonkey (iceape), fluidsynth, mumble and qemu, Most/all of these packages can probably be compiled with pulseaudio or libpulse as an optional dependency instead.

An issue was discovered in GNU patch through 2.7.6. There is a segmentation fault, associated with a NULL pointer dereference, leading to a denial of service in the intuit_diff_type function in pch.c, aka a “mangled rename” issue.

https://security-tracker.debian.org/tracker/CVE-2018-6951

With the recent update to hypervideo, my workflow is broken as I can’t archive several youtube channels with hypervideo, the error is always the following :

WARNING: unable to extract html5 player; please report this issue on https://issues.hyperbola.info/ . Make sure you are using the latest version; type 'pacman -Sy hypervideo' as root. Be sure to call hypervideo with the --verbose flag and include its complete output.
[youtube] {22} signature length 44.40, html5 player None
ERROR: Signature extraction failed: Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1194, in _decrypt_signature
    video_id, player_url, s
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1127, in _extract_signature_function
    raise ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL", expected=True)
hypervideo.utils.ExtractorError: YouTube's DRM has prevented this software from obtaining the video URL
 (caused by ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL",)); please report this issue on https://issues.hyperbola.info/ . Make sure you are using the latest version; type 'pacman -Sy hypervideo' as root. Be sure to call hypervideo with the --verbose flag and include its complete output.
Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1194, in _decrypt_signature
    video_id, player_url, s
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1127, in _extract_signature_function
    raise ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL", expected=True)
hypervideo.utils.ExtractorError: YouTube's DRM has prevented this software from obtaining the video URL
Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1194, in _decrypt_signature
    video_id, player_url, s
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1127, in _extract_signature_function
    raise ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL", expected=True)
hypervideo.utils.ExtractorError: YouTube's DRM has prevented this software from obtaining the video URL

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/YoutubeDL.py", line 792, in extract_info
    ie_result = ie.extract(url)
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/common.py", line 508, in extract
    ie_result = self._real_extract(url)
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1806, in _real_extract
    encrypted_sig, video_id, player_url, age_gate)
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1204, in _decrypt_signature
    'Signature extraction failed: ' + tb, cause=e)
hypervideo.utils.ExtractorError: Signature extraction failed: Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1194, in _decrypt_signature
    video_id, player_url, s
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1127, in _extract_signature_function
    raise ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL", expected=True)
hypervideo.utils.ExtractorError: YouTube's DRM has prevented this software from obtaining the video URL
 (caused by ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL",)); please report this issue on https://issues.hyperbola.info/ . Make sure you are using the latest version; type 'pacman -Sy hypervideo' as root. Be sure to call hypervideo with the --verbose flag and include its complete output.

Description: i3-gaps is a fork of i3 that properly implements gaps.

Additional info:
It is implemented in the AUR https://www.archlinux.org/packages/community/x86_64/i3-gaps/ and it’s source is available on github: https://github.com/Airblader/i3

Could it be possible to add :

mkv-extractor-qt

“Graphical MKV demultiplexer”

https://aur.archlinux.org/packages/mkv-extractor-qt/

License: GPL3

Thanks

This already works for it, but I just thought I would request it to be put in.

Since python-pip and python2-pip have been removed, I can’t install python2-reportlab because python2-pip is a dependency of this package.
.

Description:

Devede fails to convert transcoded videos to iso format with libburn-1.5.0.

Drive current: -outdev 'stdio:/home/heckyel/movie/movie.iso'
Media current: stdio file, overwriteable
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data,  334g free
xorriso : FAILURE : -as genisofs: Unsupported option '-dvd-video'
xorriso : NOTE : -return_with SORRY 32 triggered by problem severity FAI

Additional info:

$ pacman -Si devede
Repositorio               : community
Nombre                    : devede
Versión                   : 4.8.8-1
Descripción               : A program to create VideoDVDs and CDs
Arquitectura              : any
URL                       : http://www.rastersoft.com/programas/devede.html
Licencias                 : GPL3
Grupos                    : Nada
Provee                    : Nada
Depende de                : mencoder  ffmpeg  dvdauthor  vcdimager  cdrkit  ttf-dejavu
                            gtk3  python-cairo  python-gobject  python-setuptools
Dependencias opcionales   : mplayer
                            vlc
                            mpv
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1640,88 KiB
Tamaño de la instalación  : 3331,00 KiB
Encargado                 : Sergej Pupykin <pupykin.s+arch@gmail.com>
Fecha de creación         : vie 10 feb 2017 05:06:37 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Link’s code:

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/mkisofs.py#L61

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/genisoimage.py#L61

Steps to reproduce:

- Install devede
- Create video DVD disc

Prior version 0.0.25 and below are outdated.

Since version 0.100 and later, there are some changes being redesigned from scratch, added three new weights (including extra bold, light and thin) but not italic or oblique styles, AppStream metadata translations from contributors, and more.

See the version history releases for more details: https://gitlab.gnome.org/GNOME/cantarell-fonts/raw/master/NEWS

solicito este paquete [printer-driver-escpr] para estar disponible en hyperbola, quizá sean necesarios los siguientes enlaces

https://aur.archlinux.org/packages/epson-inkjet-printer-escpr/#comment-693540
http://www.openprinting.org/driver/epson-escpr

pd.:
con este paquete es posible imprimir con impresoras epson

Additional info:
* package version

Repositorio               : community
Nombre                    : clamtk
Versión                   : 5.24-1
Descripción               : Easy to use, light-weight, on-demand virus scanner for Linux
                            systems
Arquitectura              : any
URL                       : https://dave-theunsub.github.io/clamtk/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : clamav  perl  gtk2-perl  perl-locale-gettext  perl-libwww
                            perl-http-message  perl-lwp-protocol-https  perl-text-csv
                            perl-json  python  zenity  desktop-file-utils  gnome-icon-theme
                            cron
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 179,90 KiB
Tamaño de la instalación  : 1378,00 KiB
Encargado                 : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación         : sáb 19 nov 2016 20:25:20 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ clamtk
Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.

Steps to reproduce:

* Install clamtk in all version

It worked fine on the previous version of Hyperbola. The word user/username does not show up. A workaround is to wait 10 seconds and enter the username and click enter - then it will switch correctly to the password screen (otherwise you need to enter the username and password at least twice in order to successfully login).

Hello,

I’m unable to print some pdfs on my Hyperbola 3.0 system.
Some background :

cups is installed, service enabled and working
system-config-printer is installed and my printer has been correctly added.

I can print most pdfs and text files but recently with a pdf, it fails to print it.* And system-config-printer returned the following error (see capture) :

Printer "EPSON XP-620-Series" requires the '/usr/lib/cups/filters/epson-escpr-wrapper' but it is not currently installed.

Currently, “epson-escpr-wrapper” is installed but it is in :

/usr/libexec/cups/filters/epson-escpr-wrapper

Looking at source code of system-config-printer, it expects that wrapper to be installed in “/usr/lib/” so I tried to symlink that “epson-escpr-wrapper” to “/usr/lib/cups/filters” but it doesn’t work..

*With a Debian system and the exact same configuration, the “problematic” pdf prints just fine so it is not an issue with the pdf.

A format is not known or recognized in the original code base. To add a string into at the audio section in xferc.in:

opus = "<audioplayer>,<audioplayer>,audacity;Opus Audio;mp3_32x32.png;mp3_16x16.png;;"

Two formats (including HTML and PHP) are provided to run semi-libre/free web browser Mozilla Firefox in the original code base, but it currently got blacklisted due to numerous branding, security and privacy issues, and replaced by the Hyperbola Iceweasel-UXP. To replace existing strings at the web section in xferc.in:

html = "iceweasel-uxp,iceweasel-uxp,<txteditor>;Hyper Text;html_32x32.png;html_16x16.png;;"
htm = "iceweasel-uxp,iceweasel-uxp,<txteditor>;Hyper Text;html_32x32.png;html_16x16.png;;"
php = "iceweasel-uxp,iceweasel-uxp,<txteditor>;PHP Source;html_32x32.png;html_16x16.png;;"