|
Any | Bug Report | Very High | Critical | [openrc] fix "chroot" initscript | Closed | |
Task Description
Description:
Additional info:
/etc/conf.d/chroot
# initial command
CR_COMD=/sbin/openrc-init
-# network interfaces
-CR_NINF="veth_guest ethernet"
-# wifi interfaces
-CR_WINF="wifi"
-# service dependecies
-CR_DEPS="net_veth.interface_host
- chroot.name net.interface_ethernet net.interface_wifi"
+# network interfaces, example: CR_NINF="veh0 eth0"
+CR_NINF=""
+# wifi interfaces, example: CR_WINF="wlan0"
+CR_WINF=""
+# service dependecies, example: CR_DEPS="net.veh0 chroot.dns chroot.ntp net.eth0 net.wlan0"
+CR_DEPS=""
# wait in seconds to run CR_COMD
CR_CDWT=1
-# wait in seconds to start the sercice
+# wait in seconds to start the service
CR_STWT=7
# wait in seconds to stop the service
CR_SPWT=7
/etc/init.d/chroot
depend() {
- need $CR_NDEP
+ need $CR_DEPS
after modules bootmisc localmount net netmount
keyword -jail -prefix -vserver
provide oslv
}
$ pacman -Si openrc
Repository : core
Name : openrc
Version : 0.28-18
Description : A dependency based init system that works with the system provided init program
Architecture : x86_64
URL : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses : BSD2
Groups : None
Provides : None
Depends On : psmisc pam
Optional Deps : netifrc: network interface management scripts
networkmanager: network connection manager and user applications
Conflicts With : None
Replaces : None
Download Size : 193.18 KiB
Installed Size : 1720.00 KiB
Packager : André Silva <emulatorman@hyperbola.info>
Build Date : Sun 08 Jul 2018 01:28:16 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature
Steps to reproduce:
|
|
Any | Bug Report | Very High | Critical | [netifrc] fix "net_veth" and "net_macsec" initscripts | Closed | |
Task Description
Description:
Additional info:
/etc/conf.d/net_veth
-# Source Interface (host)
-IFSRC=interface_host
+# Source Interface (host), example: IFSRC=veh0
+IFSRC=veh0
# Set custom parameters on Source Interface
IFCTS=
-# Destination Interface (guest)
-IFDST=interface_guest
+# Destination Interface (guest), example: IFDST=veg0
+IFDST=veg0
# Set custom parameters on Destination Interface
IFCTD=
/etc/conf.d/net_macsec
-# Source Interface (host)
-IFSRC=interface_host
-# Network init service dependency from Source Interface
-#IFDEP=net.interface_host
-# Destination Interface (macsec/guest)
-IFDST=interface_macsec
+# Source Interface (host), example: IFSRC=eth0
+IFSRC=eth0
+# Network init service dependency from Source Interface, example: IFDEP=net.eth0
+IFDEP=
+# Destination Interface (macsec/guest), example: IFDST=macsec0
+IFDST=macsec0
# Set custom parameters on MACsec Interface
IFCTD=
---
IFPAR="cipher gcm-aes-128
icvlen 16
encrypt on
protect off
replay off
send_sci on
- validate strict"
+ validate disabled"
---
-# Add receive channels and/or receive association keys (RXSC), examples:
-#
-# [sci_<0..ffffffffffffffff(hex)>|port_<1..65535(dec)>_address_<00:00:00:00:00:00..ff:ff:ff:ff:ff:ff(hex)>][_<on/off>]
-#
-# sci_0
-# sci_ffffffffffffffff_on
-# port_1_address_00:00:00:00:00:00
-# port_2_address_ff:ff:ff:ff:ff:ff_off
-#
-# [sci_<0..ffffffffffffffff(hex)>_|port_<1..65535(dec)>_address_<00:00:00:00:00:00..ff:ff:ff:ff:ff:ff(hex)>_]sa_<0..3(dec)>_[pn_<1..4294967295(dec)>_][<on/off>_]key_<00..ff(hex)>_<00000000000000000000000000000000..ffffffffffffffffffffffffffffffff(hex)>
-#
-# sa_0_key_00_00000000000000000000000000000000
-# sa_1_key_pn_1_01_f00f00f00f00f00f00f00f00f00f00f0
-# sa_2_key_on_32_de_de00de00de00de00de00de00de00de00
-# sa_3_key_pn_16345_off_a1_fca1fca1fca1fca1fca1fca1fca1fca1
-# sci_0_sa_0_key_00_00000000000000000000000000000000
-# sci_32_sa_1_key_pn_1_01_f00f00f00f00f00f00f00f00f00f00f0
-# sci_451_sa_2_key_on_32_de_de00de00de00de00de00de00de00de00
-# sci_7438f_sa_3_key_pn_16345_off_a1_fca1fca1fca1fca1fca1fca1fca1fca1
-# port_1_address_00:00:00:00:00:00_sa_0_key_00_00000000000000000000000000000000
-# port_2_address_ff:ff:ff:ff:ff:ff_sa_1_key_pn_1_01_f00f00f00f00f00f00f00f00f00f00f0
-# port_3_address_00:00:00:ff:ff:ff_sa_2_key_on_32_de_de00de00de00de00de00de00de00de00
-# port_4_address_ff:ff:ff:00:00:00_sa_3_key_pn_16345_off_a1_fca1fca1fca1fca1fca1fca1fca1fca1
+# Add receive channels and/or receive association keys (RXSC), examples:
+#
+# "[sci <0..ffffffffffffffff(hex)>|port <1..65535(dec)> address <00:00:00:00:00:00..ff:ff:ff:ff:ff:ff(hex)>][ <on/off>]"
+#
+# "sci 0"
+# "sci ffffffffffffffff on"
+# "port 1 address 00:00:00:00:00:00"
+# "port 2 address ff:ff:ff:ff:ff:ff off"
+#
+# "[sci <0..ffffffffffffffff(hex)> |port <1..65535(dec)> address <00:00:00:00:00:00..ff:ff:ff:ff:ff:ff(hex)> ]sa <0..3(dec)> [pn <1..4294967295(dec)> ][<on/off> ]key <00..ff(hex)> <00000000000000000000000000000000..ffffffffffffffffffffffffffffffff(hex)>"
+#
+# "sci 0 sa 0 key 00 00000000000000000000000000000000"
+# "sci 32 sa 1 pn 1 key 01 f00f00f00f00f00f00f00f00f00f00f0"
+# "sci 451 sa 2 on key de de00de00de00de00de00de00de00de00"
+# "sci 7438f sa 3 pn 16345 off key a1 fca1fca1fca1fca1fca1fca1fca1fca1"
+# "port 1 address 00:00:00:00:00:00 sa 0 key 00 00000000000000000000000000000000"
+# "port 2 address ff:ff:ff:ff:ff:ff sa 1 pn 1 key 01 f00f00f00f00f00f00f00f00f00f00f0"
+# "port 3 address 00:00:00:ff:ff:ff sa 2 on key de de00de00de00de00de00de00de00de00"
+# "port 4 address ff:ff:ff:00:00:00 sa 3 pn 16345 off key a1 fca1fca1fca1fca1fca1fca1fca1fca1"
+#
+# IFRSC=("port 1 address 00:00:00:00:00:00 on"
+# "port 1 address 00:00:00:00:00:00 sa 0 pn 1 on key 00 00000000000000000000000000000000"
+# "sci ffffffffffff0001 on"
+# "sci ffffffffffff0001 sa 0 pn 1 on key 00 ffffffffffffffffffffffffffffffff")
IFRSC=()
-# Add trasmition association keys (TXSC) , examples:
-# sa_<0..3(dec)>_[pn_<1..4294967295(dec)>_][<on/off>_]key_<00..ff(hex)>_<00000000000000000000000000000000..ffffffffffffffffffffffffffffffff(hex)>
-#
-# sa_0_key_00_00000000000000000000000000000000
-# sa_1_key_pn_1_01_f00f00f00f00f00f00f00f00f00f00f0
-# sa_2_key_on_32_de_de00de00de00de00de00de00de00de00
-# sa_3_key_pn_16345_off_a1_fca1fca1fca1fca1fca1fca1fca1fca1
+# Add trasmition association keys (TXSC) , examples:
+# "sa <0..3(dec)> [pn <1..4294967295(dec)> ][<on/off> ]key <00..ff(hex)> <00000000000000000000000000000000..ffffffffffffffffffffffffffffffff(hex)>"
+#
+# "sa 0 key 00 00000000000000000000000000000000"
+# "sa 1 pn 1 key 01 f00f00f00f00f00f00f00f00f00f00f0"
+# "sa 2 on key de de00de00de00de00de00de00de00de00"
+# "sa 3 pn 16345 off key a1 fca1fca1fca1fca1fca1fca1fca1fca1"
+#
+# IFTSC=("sa 0 pn 1 on key 00 00000000000000000000000000000000")
IFTSC=()
/etc/init.d/net_macsec
if [[ $IFRSC ]]; then
- for mac_rxsc in ${IFRSC[@]}; do
- ip macsec add $IFDST rx ${mac_rxsc/_/ }
+ for mac_rxsc in "${IFRSC[@]}"; do
+ ip macsec add $IFDST rx $mac_rxsc
done
fi
if [[ $IFTSC ]]; then
- for mac_txsc in ${IFTSC[@]}; do
- ip macsec add $IFDST tx ${mac_txsc/_/ }
+ for mac_txsc in "${IFTSC[@]}"; do
+ ip macsec add $IFDST tx $mac_txsc
done
fi
$ pacman -Si netifrc
Repository : core
Name : netifrc
Version : 0.6.0-2.backports1
Description : Network interface management scripts
Architecture : x86_64
URL : https://wiki.gentoo.org/wiki/Netifrc
Licenses : BSD2
Groups : base
Provides : None
Depends On : eudev
Optional Deps : iproute2: for interface handler, VPN, bridging and tunneling support (recommended)
net-tools: for interface handler support
bridge-utils: for bridging support
linux-atm: for CLIP and RFC 2684 bridge support
wpa_supplicant: for wireless networking support (recommended)
wireless_tools: for wireless networking support
dhcpcd: for DHCP support (recommended)
dhclient: for DHCP support
busybox: for DHCP support
iputils: for APIPA support
ifenslave: for bonding interfaces
ppp: for PPP and ADSL support (recommended)
rp-pppoe: for ADSL support
macchanger: for changing MAC addresses
ifplugd: for cable in/out detection
Conflicts With : None
Replaces : None
Download Size : 66.18 KiB
Installed Size : 373.00 KiB
Packager : André Silva <emulatorman@hyperbola.info>
Build Date : Tue 03 Jul 2018 12:16:13 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature
Steps to reproduce:
|
|
Any | Bug Report | Very High | Critical | [netifrc] "net.lo" initscript is forced to load in "boo ... | Closed | |
Task Description
Description:
“net.lo” initscript is forced to load in “boot” runlevel by default.
“loopback” interface doesn’t need changes.
“net.lo” initscript conflicts with another network services, like: NetworkManager.
“net.lo” initscript takes extra processor and memory resources when is useless.
Additional info:
This file needs be removed:
* /etc/runlevels/boot/net.lo
$ pacman -Si netifrc
Repository : core
Name : netifrc
Version : 0.6.0-2.backports1
Description : Network interface management scripts
Architecture : x86_64
URL : https://wiki.gentoo.org/wiki/Netifrc
Licenses : BSD2
Groups : base
Provides : None
Depends On : eudev
Optional Deps : iproute2: for interface handler, VPN, bridging and tunneling support (recommended)
net-tools: for interface handler support
bridge-utils: for bridging support
linux-atm: for CLIP and RFC 2684 bridge support
wpa_supplicant: for wireless networking support (recommended)
wireless_tools: for wireless networking support
dhcpcd: for DHCP support (recommended)
dhclient: for DHCP support
busybox: for DHCP support
iputils: for APIPA support
ifenslave: for bonding interfaces
ppp: for PPP and ADSL support (recommended)
rp-pppoe: for ADSL support
macchanger: for changing MAC addresses
ifplugd: for cable in/out detection
Conflicts With : None
Replaces : None
Download Size : 66.18 KiB
Installed Size : 373.00 KiB
Packager : André Silva <emulatorman@hyperbola.info>
Build Date : Tue 03 Jul 2018 12:16:13 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature
Steps to reproduce:
|
|
Any | Bug Report | Very High | Critical | [eudev] "udev" and "udev-trigger" initscripts are force ... | Closed | |
Task Description
Description:
“udev” initscript is loaded by “udev-trigger”.
“udev-trigger” is needed load on “boot” runlevel, not”sysinit” one.
“udev-trigger” initscript is forced to be added in the sysinit runlevel through upgrading package process
It avoids use “eudev” side-by-side with “vdev”.
Additional info:
This file need be removed:
* /etc/runlevels/sysinit/udev
This file needs to be changed in "boot" runlevel, not "sysinit" runlevel;
This file needs be included only in the installing process not updating one.
- /etc/runlevels/sysinit/udev-trigger
+ /etc/runlevels/boot/udev-trigger
$ pacman -Si eudev
Repository : core
Name : eudev
Version : 3.2.5-2
Description : The userspace dev tools (udev) forked by Gentoo, with OpenRC support
Architecture : x86_64
URL : https://wiki.gentoo.org/wiki/Project:Eudev
Licenses : GPL
Groups : None
Provides : udev
Depends On : libeudev kbd kmod hwids util-linux
Optional Deps : None
Conflicts With : udev
Replaces : udev
Download Size : 931.20 KiB
Installed Size : 7072.00 KiB
Packager : André Silva <emulatorman@hyperbola.info>
Build Date : Sun 01 Jul 2018 01:26:17 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature
Steps to reproduce:
|
|
Any | Bug Report | Very High | Critical | [openrc] run "sysctl" initscript after "net" initscript | Closed | |
Task Description
Description:
Additional info:
/etc/init.d/sysctl
- after clock
+ after clock net
$ pacman -Si openrc
Repository : core
Name : openrc
Version : 0.28-18
Description : A dependency based init system that works with the system provided init program
Architecture : x86_64
URL : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses : BSD2
Groups : None
Provides : None
Depends On : psmisc pam
Optional Deps : netifrc: network interface management scripts
networkmanager: network connection manager and user applications
Conflicts With : None
Replaces : None
Download Size : 193.18 KiB
Installed Size : 1720.00 KiB
Packager : André Silva <emulatorman@hyperbola.info>
Build Date : Sun 08 Jul 2018 01:28:16 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature
Steps to reproduce:
|
|
Any | Backport Request | Very High | High | [nodejs] backporting to nodejs LTS 8.11.3 | Closed | |
Task Description
Description:
Hi dear developers of Hyperbola. I work in the field of web development. I use a lot of javascript and nodejs to compile. Could they do the nodejs update?. I also mention this because Hyperbola works with LTS packages.
Additional info:
* package version(s)
$ sudo pacman -Si nodejs
Repositorio : community
Nombre : nodejs
Versión : 7.10.0-1
Descripción : Evented I/O for V8 javascript
Arquitectura : x86_64
URL : http://nodejs.org/
Licencias : MIT
Grupos : Nada
Provee : Nada
Depende de : openssl-1.0 zlib icu libuv http-parser c-ares
Dependencias opcionales : npm: nodejs package manager
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 4,55 MiB
Tamaño de la instalación : 18,49 MiB
Encargado : Felix Yan <felixonmars@archlinux.org>
Fecha de creación : mié 03 may 2017 09:50:26 -05
Validado por : Suma MD5 Suma SHA-256 Firma
$ sudo pacman -Si npm
Repositorio : community
Nombre : npm
Versión : 4.5.0-1
Descripción : A package manager for javascript
Arquitectura : any
URL : https://www.npmjs.com/
Licencias : custom:Artistic
Grupos : Nada
Provee : nodejs-node-gyp
Depende de : nodejs semver
Dependencias opcionales : python2: for node-gyp
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 2,72 MiB
Tamaño de la instalación : 13,98 MiB
Encargado : Felix Yan <felixonmars@archlinux.org>
Fecha de creación : mié 12 abr 2017 22:08:06 -05
Validado por : Suma MD5 Suma SHA-256 Firma
- NodeJS LTS (includes npm 5.6.0):
* https://nodejs.org/dist/v8.11.3/node-v8.11.3.tar.gz
* https://nodejs.org/dist/v8.11.3/SHASUMS256.txt.asc
Some errors that I suffer when compiling: - https://stackoverflow.com/questions/46476741/nodejs-util-promisify-is-not-a-function
|
|
Any | Security Issue | Very High | Critical | [openssh] CVE-2018-15473 | Closed | |
Task Description
OpenSSH through 7.7 is prone to a user enumeration vulnerability due to not delaying bailout for an invalid authenticating user until after the packet containing the request has been fully parsed, related to auth2-gss.c, auth2-hostbased.c, and auth2-pubkey.c.
https://security-tracker.debian.org/tracker/CVE-2018-15473
Patch: https://salsa.debian.org/ssh-team/openssh/commit/4641c58a3279f6b118f9562babaa0ee050a38619
Technical analysis: https://blog.nviso.be/2018/08/21/openssh-user-enumeration-vulnerability-a-close-look/
|
|
Any | Feature Request | Very High | High | [gpsd]: contains systemd files | Closed | |
Task Description
Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.
Additional info: * package version(s)
extra/gpsd 3.16-3 [installed]
GPS daemon and library to support USB/serial GPS devices
* config and/or log files etc.
Additional info:
Steps to reproduce: install it
|
|
Any | Security Issue | Very High | Critical | [dropbear] CVE-2018-15599 | Closed | |
Task Description
User enumeration in Dropbear 2018.76 and earlier http://lists.ucc.gu.uwa.edu.au/pipermail/dropbear/2018q3/002108.html
Patch: https://secure.ucc.asn.au/hg/dropbear/rev/5d2d1021ca00
|
|
Any | Security Issue | Very High | Critical | [mutt] CVE-2018-14354 | Closed | |
Task Description
An issue was discovered in Mutt before 1.10.1 and NeoMutt before 2018-07-16. They allow remote IMAP servers to execute arbitrary commands via backquote characters, related to the mailboxes command associated with a manual subscription or unsubscription.
https://security-tracker.debian.org/tracker/CVE-2018-14354
|
|
Any | Security Issue | Very High | Critical | [iceweasel-uxp-noscript] Zero-day bypass and script exe ... | Closed | |
Task Description
Description:
NoScript zero-day allows script execution even with scripts blocked by default.
https://www.zdnet.com/article/exploit-vendor-drops-tor-browser-zero-day-on-twitter/
https://twitter.com/ma1/status/1039163003034324992
Additional info: * package version(s) < 5.1.8.7
Steps to reproduce: Set the Content-Type of your html/js page to “text/html;json” and enjoy full JS pwnage”
|
|
Stable | Feature Request | Very High | High | [hiawatha]: remove systemd files, provide openrc | Closed | |
Task Description
Description:
Hiawatha contains only systemd files.
It shall be removed and openrc shall be provided
|
|
Any | Security Issue | Very High | Critical | [util-linux] CVE-2018-7738 | Closed | |
Task Description
Description: In util-linux before 2.32-rc1, bash-completion/umount allows local users to gain privileges by embedding shell commands in a mountpoint name, which is mishandled during a umount command (within Bash) by a different user, as demonstrated by logging in as root and entering umount followed by a tab character for autocompletion.
https://blog.grimm-co.com/post/malicious-command-execution-via-bash-completion-cve-2018-7738/
|
|
Any | Feature Request | Very High | High | [umurmur] needs OpenRC init script and contains systemd ... | Closed | |
Task Description
Description:
Additional info:
umurmur /usr/lib/systemd/system/umurmur.service
Steps to reproduce:
|
|
Any | Bug Report | Very High | High | [openrc] needs a minor fix | Closed | |
Task Description
Description:
Additional info:
openrc /usr/lib/rc/sh/init.sh
—
- mount -n -t proc -o noexec,nosuid,nodev,gid=proc,hidepid=2 proc /proc
+ mount -n -t proc -o noexec,nosuid,nodev proc /proc
+ mount -n /proc -o remount,gid=26,hidepid=2
Steps to reproduce:
|
|
Any | Security Issue | Very High | Critical | [schroedinger] unmaintained and unsupportable | Closed | |
Task Description
Description:
Remove Schrödinger in Hyperbola because it’s unmaintained and unsupportable. [0] [1]
Additional info:
$ pacman -Si schroedinger
Repository : extra
Name : schroedinger
Version : 1.0.11-3
Description : An implemenation of the Dirac video codec in ANSI C code
Architecture : x86_64
URL : https://launchpad.net/schroedinger
Licenses : GPL2 LGPL2.1 MPL MIT
Groups : None
Provides : None
Depends On : orc gcc-libs
Optional Deps : None
Conflicts With : None
Replaces : None
Download Size : 331.64 KiB
Installed Size : 1676.00 KiB
Packager : Evangelos Foutras <evangelos@foutrelis.com>
Build Date : Sat 05 Dec 2015 12:28:01 PM -03
Validated By : MD5 Sum SHA-256 Sum Signature
Steps to reproduce:
|
|
Any | Security Issue | Very High | Critical | [vlc] CVE-2017-17670 | Closed | |
Task Description
Description:
In VideoLAN VLC media player through 2.2.8, there is a type conversion vulnerability in modules/demux/mp4/libmp4.c in the MP4 demux module leading to a invalid free, because the type of a box may be changed between a read operation and a free operation.
Additional info: * package version(s)
* config and/or log files etc.
Steps to reproduce:
|
|
Any | Security Issue | Very High | Critical | [vlc] CVE-2018-11529 | Closed | |
Task Description
Description:
Additional info: * package version(s)
* config and/or log files etc.
Steps to reproduce:
|
|
Any | Security Issue | Very High | Critical | [qtpass] Insecure Password Generation prior to 1.2.1 | Closed | |
Task Description
Description: As stated on the home page of the project (https://qtpass.org/): <quote> All passwords generated with QtPass’ built-in password generator prior to 1.2.1 are possibly predictable and enumerable by hackers. </quote>
|
|
Any | Freedom Issue | Very High | Critical | [qtemu] package recommends installing non-free OSes | Closed | |
Task Description
When running QtEmu for the first time and running the new machine wizard, the software lists non-free operating systems and refers to GNU/Linux as Linux.
It would be nice to list LibertyBSD in the list of distros in this software in addition to GNU/Linux and GNU/Hurd (which are listed in aqemu).
|
|
Any | Security Issue | Very High | Critical | [toxcore] Memory leak - Remote DDoS vunerability | Closed | |
Task Description
Description:
A memory leak bug was discovered in Toxcore that can be triggered remotely to exhaust one’s system memory, resulting in a denial of service attack... As a general reminder, if you are still using irungentoo’s toxcore, we strongly encourage you to switch to using TokTok c-toxcore instead as it’s a lot more actively developed and maintained. In fact, irungentoo’s toxcore is neither being developed nor maintained for some time now, aside from merging only the most critical fixes from TokTok c-toxcore from time to time, missing all other important fixes.
Additional info: * package version(s): < 2.8
https://blog.tox.chat/2018/10/memory-leak-bug-and-new-toxcore-release-fixing-it/
|
|
Any | Security Issue | Very High | Critical | [libssh] CVE-2018-10933 | Closed | |
Task Description
Description: libssh versions 0.6 and above have an authentication bypass vulnerability in the server code. By presenting the server an SSH2_MSG_USERAUTH_SUCCESS message in place of the SSH2_MSG_USERAUTH_REQUEST message which the server would expect to initiate authentication, the attacker could successfully authentciate without any credentials.
Additional info: * package version(s) : extra/libssh 0.7.5-1
CVE
|
|
Any | Security Issue | Very High | Critical | [openldap] 2.4.44 multiple security issues | Closed | |
Task Description
Description: Changelog
2.4.46 is fixing a huge quantity of issues (TLS related & memory leak)
Additional info: * package version(s) : 2.4.44
|
|
Any | Bug Report | Very High | High | [mkinitcpio] consolefont and keymap hooks is adapted to ... | Closed | |
Task Description
Description:
Additional info:
/usr/lib/initcpio/install/consolefont
---
- [[ -s /etc/vconsole.conf ]] && . /etc/vconsole.conf
+ [[ -s /etc/conf.d/consolefont ]] && . /etc/conf.d/consolefont
- if [[ $FONT ]]; then
- for file in "/usr/share/kbd/consolefonts/$FONT".@(fnt|psf?(u))?(.gz); do
+ if [[ $consolefont ]]; then
+ for file in "/usr/share/kbd/consolefonts/$consolefont".@(fnt|psf?(u))?(.gz); do
- error "consolefont: requested font not found: \`%s'" "$FONT"
+ error "consolefont: requested font not found: \`%s'" "$consolefont"
-This hook loads consolefont specified in vconsole.conf during early
-userspace.
+This hook loads consolefont specified in /etc/conf.d/consolefont during
+early userspace.
/usr/lib/initcpio/install/keymap
---
- for cfg in /etc/{vconsole,locale}.conf; do
+ for cfg in /etc/{conf.d/keymaps,locale}.conf; do
- loadkeys -q $uc ${KEYMAP:-us} -b > "$BUILDROOT/keymap.bin"
+ loadkeys -q $uc ${keymap:-us} -b > "$BUILDROOT/keymap.bin"
-This hook loads keymap(s) specified in vconsole.conf during early
-userspace.
+This hook loads keymap(s) specified in /etc/conf.d/keymaps during
+early userspace.
Repository : core
Name : mkinitcpio
Version : 23-1.hyperbola3.1
Description : Modular initramfs image creation utility, with eudev support
Architecture : any
URL : https://projects.archlinux.org/mkinitcpio.git/
Licenses : GPL
Groups : None
Provides : None
Depends On : awk mkinitcpio-busybox>=1.19.4-2 kmod util-linux>=2.23 libarchive coreutils bash findutils grep filesystem>=2011.10-1 gzip eudev
Optional Deps : xz: Use lzma or xz compression for the initramfs image
bzip2: Use bzip2 compression for the initramfs image
lzop: Use lzo compression for the initramfs image
lz4: Use lz4 compression for the initramfs image
mkinitcpio-nfs-utils: Support for root filesystem on NFS
Conflicts With : None
Replaces : None
Download Size : 38.40 KiB
Installed Size : 186.00 KiB
Packager : André Silva <emulatorman@hyperbola.info>
Build Date : Fri 05 Oct 2018 03:28:32 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature
Steps to reproduce:
|
|
Any | Security Issue | Very High | Critical | [php] CVE-2017-9120 | Closed | |
Task Description
Description:
PHP 7.x through 7.1.5 allows remote attackers to cause a denial of service (buffer overflow and application crash) or possibly have unspecified other impact via a long string because of an Integer overflow in mysqli_real_escape_string.
Additional info: * package version(s)
$ pacman -Si php
Repositorio : extra
Nombre : php
Versión : 7.1.4-3.hyperbola3
Descripción : A general-purpose scripting language that is especially suited to web development, without systemd support
Arquitectura : x86_64
URL : http://www.php.net
Licencias : PHP
Grupos : Nada
Provee : php-ldap=7.1.4
Depende de : libxml2 curl libzip pcre
Dependencias opcionales : Nada
En conflicto con : php-ldap
Remplaza a : php-ldap
Tamaño de la descarga : 3,02 MiB
Tamaño de la instalación : 15,94 MiB
Encargado : André Silva <emulatorman@hyperbola.info>
Fecha de creación : mié 27 dic 2017 19:15:03 -05
Validado por : Suma MD5 Suma SHA-256 Firma
* config and/or log files etc.
Last update of php be v7.1.x is v7.1.23:
- https://secure.php.net/ChangeLog-7.php#7.1.23
Patch availabble from v7.1.5 https://bugs.php.net/bug.php?id=74544
Steps to reproduce:
- Install php
|
|
Stable | Freedom Issue | Very High | Critical | [cool-retro-term] update package to 1.0.1 and remove no ... | Closed | |
|
|
Stable | Freedom Issue | Very High | Critical | [xorg-fonts-misc] contains non-libre/free Syriac typefa ... | Closed | |
|
|
Any | Freedom Issue | Very High | Critical | [python-pip][python2-pip] Pip recommends proprietary so ... | Closed | |
|
|
Any | Freedom Issue | Very High | Critical | [purple-skypeweb] Plugin only useful with Skype | Closed | |
|
|
Stable | Freedom Issue | Very High | Critical | [gftp] Remove many other (old and dead) FTP site bookma ... | Closed | |
|
|
Any | Freedom Issue | Very High | Critical | [man-pages] contains nonfree POSIX manual pages | Closed | |
|
|
Any | Bug Report | Very High | Critical | [linux-libre-lts] spinlock not released on kernel by i9 ... | Closed | |
|
|
Any | Bug Report | Very High | Critical | [electrum] package no longer works | Closed | |
|
|
Stable | Security Issue | Very High | Critical | [exim] CVE-2019-10149 | Closed | |
|
|
Any | Freedom Issue | Very High | Critical | [supertuxkart] remove nonfree Ubuntu Font Family fonts | Closed | |
|
|
Any | Bug Report | Very High | Critical | [cups] [cups-filters] ServerBin directory inconsistency | Closed | |
|
|
Any | Freedom Issue | Very High | Critical | [clementine] using non-free services and interfaces | Closed | |
|
|
Any | Freedom Issue | Very High | Critical | [gens] contains nonfree Starscream code | Closed | |
|
|
Any | Freedom Issue | Very High | Critical | [gens-gs] contains nonfree Starscream code and the Poor ... | Closed | |
|
|
Any | Freedom Issue | Very High | Critical | [dgen-sdl] contains nonfree CZ80, dZ80, DrZ80, Multi-Z8 ... | Closed | |
|
|
Any | Security Issue | Very High | Critical | [libarchive] CVE-2019-18408 | Closed | |
|
|
Any | Security Issue | Very High | Critical | [grub2] UEFI SecureBoot vulnerability + multiple flaws ... | Closed | |
|
|
Testing | Bug Report | Very High | Critical | [Hyperbola GNU/Linux 0.4] QtSSL is not working | Closed | |
|
|
Testing | Bug Report | High | High | [sway] error while loading shared libraries | Closed | |
|
|
Testing | Bug Report | High | High | [sddm] error while loading shared libraries | Closed | |
|
|
Any | Security Issue | High | High | [npapi-sdk] remove unsecure/deprecated package | Closed | |
|
|
Any | Security Issue | High | High | [npapi-vlc] remove unsecured package | Closed | |
|
|
Any | Security Issue | High | High | [nspluginwrapper] remove unsecure/deprecated package | Closed | |
|
|
Any | Security Issue | High | High | [x2goplugin] remove unsecure package | Closed | |
|
|
Any | Security Issue | High | High | [djview] remove unsecure "nsdejavu.so" | Closed | |
|