Packages

Description:

$ marble-qt –latlone=0.5,6.5
Ignoring to load the following file since it doesn’t look like a valid Marble plugin: “/usr/lib/marble/plugins/libWlocatePositionProviderPlugin.so” Reason: “Cannot load library /usr/lib/marble/plugins/libWlocatePositionProviderPlugin.so: (libwlocate.so: cannot open shared object file: No such file or directory)”

When package libwlocate is installed, it is not showing this error.

Shall that package be dependency?

Description:
GNU Guix is a purely functional package manager that can coexist peacefully with GNU/Linux distribution’s native package manaer and allows unprivileged per-user software installation.
Guix depends on several guile libraries not yet present in Hyperbola repo that need to be packaged too.

I have already prepared the necessary PKGBUILDs (attached to this task)

Request for :

qarte

“Allow you to browse into the archive of arte+7 & arteLiveWeb sites and to record your prefered videos.”

https://aur.archlinux.org/packages/qarte

License : GPL3

https://github.com/rodlie/powerkit/releases

Version 1.0 requested

When you add Lumina desktop, add this package for sure. Although it is compatible with other desktops too. So it would be good to add it regardless.

As the title says, it would be great if after

./mach build

, i could do

./mach build-deb

.

In the meantime: if i can install the files with

mach

to a specified root directory, then i can build a deb package by hand. Is that possible?

I build Iceweasel-UXP with these commands:

cd /tmp
git clone https://github.com/MoonchildProductions/UXP
cd UXP/application/
git clone https://git.hyperbola.info:50100/software/iceweasel-uxp.git
cd ..
wget http://oscomp.hu/depot/iceweasel-uxp.mozconfig -O .mozconfig
./mach build

but after this, when i give the command

./mach package

then the following happens:
http://oscomp.hu/depot/mach_package_crash.log

As per this bug report the MEGA plugin cannot be compiled using the OpenSSL version provided in hyperbola.

https://github.com/mcrapet/plowshare-module-mega/issues/18

This described solution works (I successfully upgraded the package to version 1.0.2r).

  Install the openssl-1.0 package.
  Run ./configure with the following arguments:

./configure –enable-local OPENSSL_LIBS=’-L/usr/lib/openssl-1.0 -lssl -lcrypto’ OPENSSL_CFLAGS=’-I/usr/include/openssl-1.0’

  run make

Unfortunately this solution (upgrading openssl-1.0) breaks some other packages such as phantomjs and avidemux, so it would be great if the package could be upgraded by Hyperbola’s developers alongside all its dependencies.

Description:

The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:

pacman -Ql rtkit
rtkit /etc/
rtkit /etc/dbus-1/
rtkit /etc/dbus-1/system.d/
rtkit /etc/dbus-1/system.d/org.freedesktop.RealtimeKit1.conf
rtkit /usr/
rtkit /usr/bin/
rtkit /usr/bin/rtkitctl
rtkit /usr/lib/
rtkit /usr/lib/rtkit/
rtkit /usr/lib/rtkit/rtkit-daemon
rtkit /usr/share/
rtkit /usr/share/dbus-1/
rtkit /usr/share/dbus-1/interfaces/
rtkit /usr/share/dbus-1/interfaces/org.freedesktop.RealtimeKit1.xml
rtkit /usr/share/dbus-1/system-services/
rtkit /usr/share/dbus-1/system-services/org.freedesktop.RealtimeKit1.service
rtkit /usr/share/licenses/
rtkit /usr/share/licenses/rtkit/
rtkit /usr/share/licenses/rtkit/COPYING
rtkit /usr/share/licenses/rtkit/LICENSE
rtkit /usr/share/man/
rtkit /usr/share/man/man8/
rtkit /usr/share/man/man8/rtkitctl.8.gz
rtkit /usr/share/polkit-1/
rtkit /usr/share/polkit-1/actions/
rtkit /usr/share/polkit-1/actions/org.freedesktop.RealtimeKit1.policy

* package version(s)
rtkit 0.11-1.hyperbola1

* config and/or log files etc.

Jun 26 10:41:50 gnu mtp-probe: checking bus 1, device 8: “/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4”
Jun 26 10:41:50 gnu mtp-probe: bus: 1, device: 8 was not an MTP device
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu pulseaudio[4401]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files

Steps to reproduce:

Hello Hyperbola!

GPA gives out the following errors upon opening the app.

First:

```
The GPGME library returned an unexpected
error at confdialog.c:1459. The error was:

    Unsupported protocol

This is either an installation problem or a bug in GPA.
GPA will now try to recover from this error.
```

Second:

```
Fatal Error in GPGME library
(invoked from file options.c, line 302):

    Unsupported protocol

The application will be terminated

What can I do to overcome these errors?
```
As this issue makes gpa app completely unusable, I have set this bug report’s severity as high.

I also request the admin to set priority to high due to it’s severity.

Thank you!

Regards,
RG.

Description:

minidlna lacks openrc support and includes a systemd file

Additional info: none

Steps to reproduce:

$ sudo pacman -S minidlna
$ cat /usr/lib/systemd/system/minidlna.service

Description:

Searx is better in the short term than search engines like Google and DuckDuckGo in that the client-side JavaScript is free and the server-side code is free and public. However, in the long term it can never be a real replacement for non-free search engines while it relies on non-free search engines for data. At this time, the major general purpose search engines who use their own data are all controlled by corporations like Google and Microsoft. The YaCy search engine addresses this by relying on decentralized data based on p2p.

For this reason, I believe that YaCy is socially a better choice than Searx as the default search engine for Iceweasel-UXP. However, it is not at this time a practically better choice. Since YaCy relies on its users to index the web, and does not currently have many users, the search results are not very good. This creates a chicken-and-egg problem, since it will be difficult for YaCy to gain users while its search results are poor.

However, Searx supports YaCy as a source of search engine results. I don’t know of any Searx instances which have YaCy support enabled, presumably since YaCy support would only be useful to users who have YaCy installed locally and running on http://localhost:8090, but Hyperbola could run its own Searx instance, enable YaCy support plus DuckDuckGo, and make this the default search engine for Iceweasel-UXP. This way, Iceweasel-UXP users can use and contribute to YaCy, but supplement YaCy’s search results with results from DuckDuckGo until YaCy becomes strong enough to stand on its own.

Additional info:

* AUR package for YaCy: https://aur.archlinux.org/packages/yacy

* Searx support for YaCy: https://github.com/asciimoo/searx/blob/master/searx/engines/yacy.py

Steps to reproduce: N/A

Description:

groff is typesetting system similar to TeX/LaTeX however, it is very small and very usable. It is not built properly with URW fonts, or such are missing, I cannot know all details. Overall groff package is basically somehow broken.

It shall depend on proper fonts, and such fonts should already be built, including their Unicode versions.

Package is only partially built.

This is a request to package nnn - a full-featured terminal file manager for low-end devices and the regular desktop.

nnn is available on Debian, Ubuntu (and family), Fedora, OpenSUSE and Arch Linux.

Homepage: https://github.com/jarun/nnn License: BSD 2-Clause

I would highly appreciate if nnn can be added to the repository.

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don’t think “steps to reproduce” to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don’t think “steps to reproduce” to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

Patch for 4.9 : https://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch

AUR : https://aur.archlinux.org/packages/linux-mptcp/

https://github.com/loh-tar/wpa-cute/releases

I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.

I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)

or 2019 january. :)

WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:

https://wiki.archlinux.org/index.php/Wpa_supplicant:

Password-related problems

wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.

In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:

# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf

In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed.
Problems with eduroam and other MSCHAPv2 connections

This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.

but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.

It says it cannot get the status of wpa_supplicant when I load it.

This could be an issue if you get rid of NetworkManager for some users.

So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)

https://aur.archlinux.org/packages/linux-mptcp/

Kernel Patch for 4.9 :
http://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch

Compile :
https://multipath-tcp.org/pmwiki.php/Users/DoItYourself

Description:

I may be wrong for I did not migrate to 0.3 as of yet, but I think that `msmtp` has been forgotten and needs to be recompiled with `libressl`.

Please remove this report if I am mistaken.

Description:

I may be wrong for I did not migrate to 0.3 as of yet, but I think that `msmtp` has been forgotten and needs to be recompiled with `libressl`.

Please remove this report if I am mistaken.

When updating packages this warning appears:

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Description:

Additional info:
* package version(s)

$ pacman -Si gufw
Repositorio               : community
Nombre                    : gufw
Versión                   : 17.04.1-3.hyperbola1
Descripción               : Uncomplicated way to manage your GNU/Linux firewall
Arquitectura              : any
URL                       : https://gufw.org/
Licencias                 : GPL-3
Grupos                    : Nada
Provee                    : Nada
Depende de                : gtk3  polkit  python-gobject  ufw  webkit2gtk  net-tools  desktop-file-utils  gtk-update-icon-cache
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 886,27 KiB
Tamaño de la instalación  : 3827,00 KiB
Encargado                 : HyperBuilder <hyperbuilder@hyperbola.info>
Fecha de creación         : mar 01 oct 2019 14:35:51 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

==== AUTHENTICATING FOR com.ubuntu.pkexec.gufw ===
Authentication is required to run the Firewall Configuration
Authenticating as: freedom
Password: 
polkit-agent-helper-1: error response to PolicyKit daemon: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: No session for cookie
==== AUTHENTICATION FAILED ===
Error executing command as another user: Not authorized

This incident has been reported.

Steps to reproduce:
- install gufw

I added
<quote>modules=”fs-fuse”</quote>
to /etc/conf.d/modules (and also “fuse” instead).

I looked in /var/log/rc.log and I see this line

<quote>modprobe: FATAL: Module fs-fusetun not found in directory /lib/modules/4.9.194-gnu-1-lts</quote>

It looks like modprobe added “tun” to the filename which prevents loading the module.

One can mount exfat by running commands such as “sudo modprobe fuse” and “sudo mount.exfat /dev/sdc1 /mnt/storage” but it is inconvenient.

Also, loading fuse at startup is problematic - see here:

https://issues.hyperbola.info/index.php?do=details&task_id=1433

Additional info:
* package version(s)

# pacman -Si firewalld
Repositorio               : community
Nombre                    : firewalld
Versión                   : 0.4.4.4-1.hyperbola1
Descripción               : Firewall daemon with D-Bus interface, with OpenRC support
Arquitectura              : any
URL                       : https://github.com/t-woerner/firewalld
Licencias                 : GPL2
Grupos                    : Nada
Provee                    : Nada
Depende de                : dbus-glib  dconf  ebtables  hicolor-icon-theme  ipset  iptables
                            python-slip
Dependencias opcionales   : bash-completion: bash completion
                            gtk3: firewall-config
                            libnm-glib: firewall-config and firewall-applet
                            libnotify: firewall-applet
                            python-pyqt5: firewall-applet
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 532,05 KiB
Tamaño de la instalación  : 4865,00 KiB
Encargado                 : André Silva <emulatorman@hyperbola.info>
Fecha de creación         : lun 25 sep 2017 21:00:50 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

# tail -F /var/log/firewalld

2019-10-02 22:09:45 DEBUG1: Loading zone file ‘/usr/lib/firewalld/zones/internal.xml’
2019-10-02 22:09:45 DEBUG1: Loading zone file ‘/usr/lib/firewalld/zones/public.xml’
2019-10-02 22:09:45 DEBUG1: Loading zone file ‘/usr/lib/firewalld/zones/trusted.xml’
2019-10-02 22:09:45 DEBUG1: Loading zone file ‘/usr/lib/firewalld/zones/work.xml’
2019-10-02 22:09:45 DEBUG1: Using default zone ‘public’
2019-10-02 22:09:45 ERROR: Failed to read file “/proc/sys/net/netfilter/nf_conntrack_helper”: [Errno 2] No existe el fichero o el directorio: ‘/proc/sys/net/netfilter/nf_conntrack_helper’
2019-10-02 22:09:45 WARNING: Failed to get and parse nf_conntrack_helper setting
2019-10-02 22:09:45 FATAL ERROR: No IPv4 and IPv6 firewall.
2019-10-02 22:09:45 ERROR: Raising SystemExit in run_server

Steps to reproduce:

- Install package
- rc-service firewalld start
- firewalld –debug