Packages

Does not need any insane depends, such as dbus, as far as the website says:

https://developers.hp.com/hp-linux-imaging-and-printing/install/manual/distros/other

its optional,

I would like to see it readded in the future...

I need it for printing, only one of my laptops is on 0.3, for this purpose at this time.

Description: Tried with new compiled version of mumble no open and secured with SSL-certificate is reachable. Log within console:

qt.network.ssl: QSslSocket: cannot resolve SSL_CTX_set_options
qt.network.ssl: QSslSocket: cannot resolve SSL_session_reused
qt.network.ssl: QSslSocket: cannot resolve SSL_set_options
qt.network.ssl: QSslSocket: cannot resolve BN_is_word
qt.network.ssl: QSslSocket: cannot resolve SSL_in_init

<W>2021-08-23 01:00:18.814 QSslSocket: cannot call unresolved function sk_num

<W>2021-08-23 01:00:20.270 QSslSocket: cannot call unresolved function SSL_CTX_set_options

Application is not starting and needs therefore a rework.

After setting up and testing our 32-bit QEMU instance, we often tried to initialize the X11, but it refused to do because of video driver issues.

As well as changing to other video drivers on our instance is still the exact issue.

Here is a log from X11 below we attached.

Description:
when run `espeak hi` only sound a crack and output the next message

[ user | 2021-12-13 | 12:47 ]
[/home/user] [0]
$ espeak hi
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe
ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side
ALSA lib pcm_route.c:877:(find_matching_chmap) Found no matching channel map
ALSA lib pcm_sndio.c:383:(sndio_open) sndio: only playback streams are supported
connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=No such file or directory)
attempt to connect to server failed
Expression ‘framesAvail’ failed in ‘src/hostapi/alsa/pa_linux_alsa.c’, line: 3625
Expression ‘PaAlsaStreamComponent_GetAvailableFrames( self, &framesAvail, xrun )’ failed in ‘src/hostapi/alsa/pa_linux_alsa.c’, line: 3985
Expression ‘PaAlsaStreamComponent_RegisterChannels( &self→playback, &self→bufferProcessor, &playbackFrames, &xrun )’ failed in ‘src/hostapi/alsa/pa_linux_alsa.c’, line: 4115
Expression ‘PaAlsaStream_SetUpBuffers( stream, &framesGot, &xrun )’ failed in ‘src/hostapi/alsa/pa_linux_alsa.c’, line: 4355

Additional info:
* package version(s)
* config and/or log files etc.

Steps to reproduce:
`doas pacman -S espeak`
`espeak hi`

Would be nice to have a rc-service to start an manage openvswitch automatically during system startup

This package makes virtualization very simple for newbies. It would be nice to have it in the near future.

dmesg was showing errors about this
Apparently it is not needed and can be deleted. (No errors on my side after deletion (and reboot) and no more errors message)

See this thread : https://forum.manjaro.org/t/openrc-and-73-seat-late-rules-why-deleting-it-was-a-good-thing/24599

I cannot start qemu (2.9.0-1) on latest hyperbola stable release.

Error message : qemu-system-x86_64: error while loading shared libraries: libseccomp.so.2

Thanks for your help

Hello,

When running lightdm-gtk-greeter-settings-pkexec as user.

lightdm-gtk-greeter-settings-pkexec 
==== AUTHENTICATING FOR com.ubuntu.pkexec.lightdm-gtk-greeter-settings ===
Authentication is required to run Settings editor for LightDM GTK+ Greeter
Authenticating as: root
polkit-agent-helper-1: pam_authenticate failed: Permission denied
==== AUTHENTICATION FAILED ===
Error executing command as another user: Not authorized

This incident has been reported.

Am I missing something ? Thanks for your help

groups for my username : sys disk wheel network video audio optical storage libvirt kvm users

Hello,

gparted_polkit doesn’t work, error message (polkit is installed on my system)

Error executing command as another user: No authentication agent found.

If using :

sudo gparted

or

gksu gparted

It works. By default with xfce, the gparted launcher uses gparted_polkit though.

Thanks for your help

Hello,

I can’t install blender.

Error message :

erreur : opencollada: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/opencollada-1.6.45-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : ptex: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/ptex-2.1.28-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : openimageio: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/openimageio-1.6.18-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : openshadinglanguage: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid

Already tried to refresh hyperbola keyring with :

pacman-key --populate hyperbola
pacman-key --refresh-keys
pacman -Sy hyperbola-keyring

Thanks for your help

I would greatly appreciate it as it really increases my computer’s battery life a lot.

$ service php-fpm start
 * service: No such file or directory

$ pacman -Ql php-fpm | less

php-fpm /etc/
php-fpm /etc/init.d/
php-fpm /etc/init.d/php-fpm
php-fpm /etc/php/
php-fpm /etc/php/php-fpm.conf
php-fpm /etc/php/php-fpm.d/
php-fpm /etc/php/php-fpm.d/www.conf
php-fpm /usr/
php-fpm /usr/bin/
php-fpm /usr/bin/php-fpm
php-fpm /usr/lib/
php-fpm /usr/lib/tmpfiles.d/
php-fpm /usr/lib/tmpfiles.d/php-fpm.conf
php-fpm /usr/share/
php-fpm /usr/share/man/
php-fpm /usr/share/man/man8/
php-fpm /usr/share/man/man8/php-fpm.8.gz
php-fpm /usr/share/php/
php-fpm /usr/share/php/fpm/
php-fpm /usr/share/php/fpm/status.html

Possibly the problem is the removal of runscript.
runscript conflicted in [minicom] with [openrc], detailed in https://issues.hyperbola.info/index.php?do=details&task_id=122 and was removed in openrc https://git.hyperbola.info:50100/packages/core.git/tree/openrc/PKGBUILD#n137

This package is in debian, and it allows the use of hardware encrypted flash drives.

Al momento de querer previsualizar un archivo txt o cualquier archivo que contenga texto sale este mensaje: ‘/bin/sh: sensible-editor: command not found’

icecast has a failure in hyperbola, every time you want to connect icecast you must launch this command: ‘icecast -b -c /etc/icecast.xml’, without that command icecast is not connected with the client.

filename:       /lib/modules/4.9.77-gnu-1-lts/extramodules/vhba.ko
license:        GPL
description:    Virtual SCSI HBA
version:        20161009
author:         Chia-I Wu
srcversion:     E5A3E6F70DFD436A6B1C8D6
depends:        scsi_mod
vermagic:       4.9.27-gnu-1-lts SMP mod_unload modversions

Can’t insert module vhba

Error :

modprobe: ERROR: could not insert ‘vhba’: Exec format error

We seem to have a very old version of xscreensaver... Could you possibly update it?

this may be a security issue/privacy issue.

### Some context ###

I use hdajackretask on my G41M-ES2L motherboard (Libreboot)

Alsamixer doesn’t offer automute feature so every time I plug my headphones, the sound is playing by my speakers.
So to work around this, I use hdajackretask from alsa-tools package.

It allows to install a boot override to solve the issue.

Yesterday, I reinstalled Hyperbola on my system and the boot override because of missing /lib/firmware directory. (Although it was present before, something changed ?)

The error message was (I translate)

/mv: can't move '/tmp/hda-jack-retask-VH3KIZ/hda-jack-retask.fw' to /lib/firmware/hda-jack-retask.fw' No file or folder of this type

So I created a folder “firmware” in /lib/
and copied hda-jack-retask.fw in it.

Then I rebooted, 100% working.

I don’t know if the fix should apply to the PKGBUILD of alsa-tools (to create a /lib/firmware directory) or something else ?

Since the update of openrc to 0.28-11 this morning something fails during boot process as I get the following error message:

Cowardly refusing to concatenate a logfile into itself.
Please change rc_log_path to something other than /var/log/rc.log get rid of this message

But why would I do that?

Besides, once the boot process is finished, I am unable to switch between TTY consoles as I used to using Ctrl-Alt + F1-Fx. I don’t get the login prompt anymore.

Hello,

With iceweasel-uxp, some info boxes are not translated, for now I noticed that when the mouse cursor hovers “add tab” element, the info box showing up is still using english (although I’m using French and the rest is ok), this is very, very minor issue I know.. :o)

See picture attached

Description: Thanks for the actual release of Icedove in combination with UXP. But for now support for Lightning / Iceowl is missing. Could you please add this package again, either within Icedove-UXP itself or as another addon compatible with UXP?

Hello,

octopi-notifier is not starting / running on my system, when I try to run it manually in a terminal, here is the output :

Aborting notifier as 'pacmanhelper' DBus service could not be found! [ "/usr/share/dbus-1/system-services/org.octopi.pacmanhelper.service" ]

I don’t know if this is applicable / related but I found this on aur website : https://aur.archlinux.org/packages/octopi/

kikadf :

Default build octopi-notifier without knotifications support. To enable edit PKGBUILD, uncomment #USE_NOTIFIER='1'

PS : I’m using XFCE4 autostart to start octopi-notifier (See screenshot attached)

In the latest version fixes some bugs and a crash, and small features[1].

[1]: https://dev.minetest.net/Changelog (see section 0.4.17 and 0.4.17.1 for more details)