Packages

Description:

Iceweasel-ESR always center the Top Site when there is enough room:
https://framapic.org/K3b1UNn7p1Oj/rJssWooBCdXh.png

Iceweasel-UXP is changing the positioning causing the Top Site not aligned and not centered:
https://framapic.org/cRF237xTBQ76/N6qQpO14B65b.png

https://framapic.org/cH8ncT7LHTO6/NeakZ5GqbNEt.png

Additional info:
* package version(s): 52.9.0_20180601-3

Steps to reproduce:

Changing the size of the window.

Description:
“About Iceweasel-UXP” window contains some minor issues to be fixed:

• “Iceweasel-UXP” instead of “Iceweasel” because we are a different project.
• “Hyperbola Project” instead of “the Hyperbola Project” as link to point to Hyperbola site.
• “for Iceweasel-UXP application” instead of “for Iceweasel rebranding” because we are maintaining an entire application, not just rebranding.

Additional info:
* package version(s): 52.9.0_20180601-3

Steps to reproduce:
Go to Help > About Iceweasel-UXP

recaptcha is not working on webchat.freenode.net (and probably other websites) with iceweasel-uxp (was working fine with iceweasel-esr)

https://framapic.org/ZdvYH2JCM39J/HFDSI7z0hXvS.png

Description:
There’s a XML parsing error in Iceweasel-UXP when it’s accessing a non-existent site or about:help

Additional info:
* package version(s): 52.9.0_20180601-7
* config and/or log files etc:

XML Parsing Error: undefined entity Location: jar:file:///usr/lib/iceweasel-uxp/browser/omni.ja!/chrome/browser/content/browser/aboutNetError.xhtml Line Number 22, Column 12:
    <title>&loadError.label;</title>
-----------^

Steps to reproduce:

• Install Iceweasel-UXP:

  # pacman -S iceweasel-uxp

• Run Iceweasel-UXP:

  ~ iceweasel-uxp

• Type about:help or a non-existent site in the address bar

Description:
There’s a XML parsing error in Iceweasel-UXP when it’s accessing in a feed subscription.

Additional info:
* package version(s): 52.9.0_20180601-7
* config and/or log files etc:

XML Parsing Error: undefined entity Location: jar:file:///usr/lib/iceweasel-uxp/browser/omni.ja!/chrome/browser/content/browser/feeds/subscribe.xhtml Line Number 25, Column 12:
    <title>&feedPage.title;</title>
-----------^

Steps to reproduce:

• Install Iceweasel-UXP:

  # pacman -S iceweasel-uxp

• Run Iceweasel-UXP:

  ~ iceweasel-uxp

• Enter to Hyperbola RSS Feeds page and then subscribe in one of feeds available.

Description:

Update package to 0.4.2 backport version

Note: Is needed by GIMP 2.10.2 backport or update [gegl] to 0.3.34
      Update the [babl] package
      https://issues.hyperbola.info/index.php?do=details&task_id=1051
      https://issues.hyperbola.info/index.php?do=details&task_id=1052
      https://issues.hyperbola.info/index.php?do=details&task_id=1054

Additional info:

gegl 0.3.26-2.hyperbola1

$ pacman -Si gegl
Repository      : extra
Name            : gegl
Version         : 0.3.26-2.hyperbola1
Description     : Graph based image processing framework
Architecture    : x86_64
URL             : http://www.gegl.org/
Licenses        : GPL3  LGPL3
Groups          : None
Provides        : None
Depends On      : babl  libspiro  json-glib
Optional Deps   : libraw: raw plugin
                  openexr: openexr plugin
                  ffmpeg: ffmpeg plugin
                  suitesparse: matting-levin plugin
                  librsvg: svg plugin
                  jasper: jasper plugin
                  libtiff: tiff plugin
                  lua: lua plugin
                  lensfun: lens-correct plugin
Conflicts With  : gegl02
Replaces        : gegl02
Download Size   : 1347.15 KiB
Installed Size  : 6823.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Sun 31 Dec 2017 05:37:41 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

none

Description:

Update package to 2.10.2 backport version

Note: Needs [gegl] 0.4.2 and [babl] 0.1.50
      or update [gegl] 0.3.34 only
      Update the [babl] package
      https://issues.hyperbola.info/index.php?do=details&task_id=1051
      https://issues.hyperbola.info/index.php?do=details&task_id=1052
      https://issues.hyperbola.info/index.php?do=details&task_id=1053

Additional info:

gimp 2.8.22-1.hyperbola1

Repository      : extra
Name            : gimp
Version         : 2.8.22-1.hyperbola1
Description     : GNU Image Manipulation Program, with gegl and libxslt support
Architecture    : x86_64
URL             : https://www.gimp.org/
Licenses        : GPL  LGPL
Groups          : None
Provides        : None
Depends On      : pygtk  lcms  libxpm  libwmf  libxmu  librsvg  libmng  dbus-glib  libexif  gegl  jasper  desktop-file-utils  hicolor-icon-theme  babl  openexr
                  libgudev
Optional Deps   : gutenprint: for sophisticated printing only as gimp has built-in cups print support
                  poppler-glib: for pdf support
                  alsa-lib: for MIDI event controller module
                  curl: for URI support
                  ghostscript: for postscript support
Conflicts With  : gimp-devel
Replaces        : None
Download Size   : 12.12 MiB
Installed Size  : 67.73 MiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Sun 31 Dec 2017 08:42:46 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

none

Description:

A nice Git service would be welcomed in our pacman.

- https://github.com/go-gitea/gitea

- https://www.archlinux.org/packages/community/x86_64/gitea/

Description:

• The Arch version of Erlang (headless version) from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : erlang-nox
Version         : 19.3-3
Description     : General-purpose concurrent functional programming language developed by Ericsson (headless version)
Architecture    : x86_64
URL             : http://www.erlang.org/
Licenses        : Apache
Groups          : None
Provides        : None
Depends On      : ncurses  openssl
Optional Deps   : erlang-unixodbc: database support
                  java-environment: for Java support
                  lksctp-tools: for SCTP support
Conflicts With  : erlang
Replaces        : None
Download Size   : 39.01 MiB
Installed Size  : 106.73 MiB
Packager        : Jan de Groot <jgc@archlinux.org>
Build Date      : Fri 28 Apr 2017 08:44:33 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

/usr/lib/systemd/system/epmd.service is owned by erlang-nox 19.3-3
/usr/lib/systemd/system/epmd.socket is owned by erlang-nox 19.3-3

Steps to reproduce:

• Install package.

Description:

I ran sensors-detect, it detected two modules :

coretemp
it87

Those have been added to /etc/sysconfig/lm_sensors :

# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
# The format of this file is a shell script that simply defines variables:
# HWMON_MODULES for hardware monitoring driver modules, and optionally
# BUS_MODULES for any required bus driver module (for example for I2C or SPI).

HWMON_MODULES="coretemp it87"

But only coretemp is loaded at boot.

I can manually load it87 module (modprobe it87) and get all sensors working but for some reason it87 module is not loaded at boot.

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:

07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.

After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

There appears to be a bug with the current version of ufw, 0.35-2

Dunno if updating it would fix it, but it is kind of annoying and possibly security issue.

it says ufw is inactive when I reboot despite it being installed in the runlevel.

Similar to systemd, pulseaudio or libpulse is forced upon users as many packages require it such as kodi, gnome-shell (and thus also gdm), ffmpeg, gst-plugins-good, simplescreenrecorder, clementine, empathy, seamonkey (iceape), fluidsynth, mumble and qemu, Most/all of these packages can probably be compiled with pulseaudio or libpulse as an optional dependency instead.

Description:

• needs OpenRC init script and contains systemd files

Additional info:

• dovecot 2.2.29.1-1

dovecot /usr/lib/systemd/system/dovecot.service
dovecot /usr/lib/systemd/system/dovecot.socket
dovecot /usr/lib/tmpfiles.d/dovecot.conf

Steps to reproduce:

• none

Description:

• needs OpenRC init script

Additional info:

• onioncat 0.2.2.r578-1

Steps to reproduce:

• none

Description:

• needs OpenRC init script and contains systemd files

Additional info:

• prosody 1:0.10.r7198+.2fd20f372cb1+-2

prosody /usr/lib/systemd/system/prosody.service
prosody /usr/lib/sysusers.d/prosody.conf
prosody /usr/lib/tmpfiles.d/prosody.conf

Steps to reproduce:

• none

Description:

• needs OpenRC init script and contains systemd files

Additional info:

• unrealircd 4.0.11-2

unrealircd /usr/lib/systemd/system/unrealircd.service
unrealircd /usr/lib/tmpfiles.d/unrealircd.conf

Steps to reproduce:

• none

Description:

• needs OpenRC init script and contains systemd file

Additional info:

• mcelog 1:148-1

mcelog /usr/lib/systemd/system/mcelog.service

Steps to reproduce:

• none

Description:

• needs OpenRC init scripts (hg serve and chg server), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

• mercurial 4.2-1

Note: needs a provide: hg

Steps to reproduce:

• none

Description:

For a strange reason, the option to choose languages for displaying pages is missing in Iceweasel-UXP [0] while is available in Firefox 55 version and bellow. [1] [2]

Seems preferences were backported from Firefox 56 version or later because that option was removed in those versions. [3]

It affects websites such as https://my.virtualhosts.de/ that requires set it from browser.

Additional info:
* package version(s)

• 52.9.20180905-2

* config and/or log files etc.

Steps to reproduce:

• Run iceweasel-uxp
• Go to https://my.virtualhosts.de/

An issue was discovered in GNU patch through 2.7.6. There is a segmentation fault, associated with a NULL pointer dereference, leading to a denial of service in the intuit_diff_type function in pch.c, aka a “mangled rename” issue.

https://security-tracker.debian.org/tracker/CVE-2018-6951

With the recent update to hypervideo, my workflow is broken as I can’t archive several youtube channels with hypervideo, the error is always the following :

WARNING: unable to extract html5 player; please report this issue on https://issues.hyperbola.info/ . Make sure you are using the latest version; type 'pacman -Sy hypervideo' as root. Be sure to call hypervideo with the --verbose flag and include its complete output.
[youtube] {22} signature length 44.40, html5 player None
ERROR: Signature extraction failed: Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1194, in _decrypt_signature
    video_id, player_url, s
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1127, in _extract_signature_function
    raise ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL", expected=True)
hypervideo.utils.ExtractorError: YouTube's DRM has prevented this software from obtaining the video URL
 (caused by ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL",)); please report this issue on https://issues.hyperbola.info/ . Make sure you are using the latest version; type 'pacman -Sy hypervideo' as root. Be sure to call hypervideo with the --verbose flag and include its complete output.
Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1194, in _decrypt_signature
    video_id, player_url, s
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1127, in _extract_signature_function
    raise ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL", expected=True)
hypervideo.utils.ExtractorError: YouTube's DRM has prevented this software from obtaining the video URL
Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1194, in _decrypt_signature
    video_id, player_url, s
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1127, in _extract_signature_function
    raise ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL", expected=True)
hypervideo.utils.ExtractorError: YouTube's DRM has prevented this software from obtaining the video URL

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/YoutubeDL.py", line 792, in extract_info
    ie_result = ie.extract(url)
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/common.py", line 508, in extract
    ie_result = self._real_extract(url)
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1806, in _real_extract
    encrypted_sig, video_id, player_url, age_gate)
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1204, in _decrypt_signature
    'Signature extraction failed: ' + tb, cause=e)
hypervideo.utils.ExtractorError: Signature extraction failed: Traceback (most recent call last):
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1194, in _decrypt_signature
    video_id, player_url, s
  File "/usr/lib/python3.6/site-packages/hypervideo/extractor/youtube.py", line 1127, in _extract_signature_function
    raise ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL", expected=True)
hypervideo.utils.ExtractorError: YouTube's DRM has prevented this software from obtaining the video URL
 (caused by ExtractorError("YouTube's DRM has prevented this software from obtaining the video URL",)); please report this issue on https://issues.hyperbola.info/ . Make sure you are using the latest version; type 'pacman -Sy hypervideo' as root. Be sure to call hypervideo with the --verbose flag and include its complete output.

Description: i3-gaps is a fork of i3 that properly implements gaps.

Additional info:
It is implemented in the AUR https://www.archlinux.org/packages/community/x86_64/i3-gaps/ and it’s source is available on github: https://github.com/Airblader/i3

Could it be possible to add :

mkv-extractor-qt

“Graphical MKV demultiplexer”

https://aur.archlinux.org/packages/mkv-extractor-qt/

License: GPL3

Thanks

This already works for it, but I just thought I would request it to be put in.