|
Any | Implementation Request | Very Low | Medium | [nnn] package request | Closed | |
Task Description
This is a request to package nnn - a full-featured terminal file manager for low-end devices and the regular desktop.
nnn is available on Debian, Ubuntu (and family), Fedora, OpenSUSE and Arch Linux.
Homepage: https://github.com/jarun/nnn License: BSD 2-Clause
I would highly appreciate if nnn can be added to the repository.
|
|
Stable | Bug Report | Very Low | Medium | [arm-unknown-linux-gnueabi-gcc] not working; needs prop ... | Closed | |
Task Description
Description: I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.
Additional info: * package version(s) - arm-unknown-linux-gnueabi-gcc - all versions
Steps to reproduce: I don’t think “steps to reproduce” to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly
|
|
Any | Implementation Request | Very Low | Medium | Support of MPTCP (Multipath TCP) on Hyperbola | Closed | |
Task Description
Patch for 4.9 : https://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch
AUR : https://aur.archlinux.org/packages/linux-mptcp/
|
|
Testing | Replace Request | Very Low | Medium | replace request: NetworkManager with wpa_cute | Closed | |
Task Description
https://github.com/loh-tar/wpa-cute/releases
I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.
I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)
or 2019 january. :)
WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:
https://wiki.archlinux.org/index.php/Wpa_supplicant:
Password-related problems
wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.
In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:
# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf
In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed. Problems with eduroam and other MSCHAPv2 connections
This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.
but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.
It says it cannot get the status of wpa_supplicant when I load it.
This could be an issue if you get rid of NetworkManager for some users.
So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)
|
|
Testing | Bug Report | Medium | Medium | [qtcreator] requires libsystemd.so | Closed | |
Task Description
Description: The currently packaged version of QtCreator is built with SystemD support, and on v0.3 no longer works.
Steps to reproduce:
Cannot load plugin because dependency failed to load: ProjectExplorer(4.2.2) Reason: /usr/lib/qtcreator/plugins/libProjectExplorer.so: Cannot load library /usr/lib/qtcreator/plugins/libProjectExplorer.so: (libsystemd.so.0: cannot open shared object file: No such file or directory)
We need to see if it is possible to build binary without libsystemd.so or remove the package.
|
|
Any | Bug Report | Medium | Medium | [sshfs] Can't mount share from desktop (FUSE2 issue) | Closed | |
Task Description
Since 0.3 release, i’m unable to mount my sshfs share from my desktop.
For reference, my fstab entry :
sshfs#anon@server:/srv/nfs/data /mnt/data fuse noauto,user,_netdev,x-gvfs-show,x-gvfs-name=data 0 0
When I double-click on the desktop icon (xfce), it says : “Impossible to mount data”
But, I’m able to mount the share if I enter the command manually in a terminal as user.
sshfs anon@server:/srv/nfs/data /mnt/data
So, it is not a problem of writing rights on mountpoint /mnt/data I suspect an issue with fuse2 since it is a dependency of sshfs and it is in relation with mounting share from desktop.
|
|
Any | Bug Report | Very Low | Medium | [slim] login screen not displaying correctly | Closed | |
Task Description
It worked fine on the previous version of Hyperbola. The word user/username does not show up. A workaround is to wait 10 seconds and enter the username and click enter - then it will switch correctly to the password screen (otherwise you need to enter the username and password at least twice in order to successfully login).
|
|
Any | Bug Report | Very Low | Medium | [openrc] cannot load fuse at boot | Closed | |
Task Description
I added <quote>modules=”fs-fuse”</quote> to /etc/conf.d/modules (and also “fuse” instead).
I looked in /var/log/rc.log and I see this line
<quote>modprobe: FATAL: Module fs-fusetun not found in directory /lib/modules/4.9.194-gnu-1-lts</quote>
It looks like modprobe added “tun” to the filename which prevents loading the module.
|
|
Any | Bug Report | Very Low | Medium | [exfat-utils] filesystem can only be mounted manually | Closed | |
Task Description
One can mount exfat by running commands such as “sudo modprobe fuse” and “sudo mount.exfat /dev/sdc1 /mnt/storage” but it is inconvenient.
Also, loading fuse at startup is problematic - see here:
https://issues.hyperbola.info/index.php?do=details&task_id=1433
|
|
Stable | Bug Report | Medium | Medium | [ipython2] broken | Closed | |
Task Description
ipython2 does not work with Milky Way (it used to work with the previous release):
$ ipython2
Traceback (most recent call last):
File "/usr/bin/ipython2", line 6, in <module>
from pkg_resources import load_entry_point
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3036, in <module>
@_call_aside
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3020, in _call_aside
f(*args, **kwargs)
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3049, in _initialize_master_working_set
working_set = WorkingSet._build_master()
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 654, in _build_master
ws.require(__requires__)
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 968, in require
needed = self.resolve(parse_requirements(requirements))
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 854, in resolve
raise DistributionNotFound(req, requirers)
pkg_resources.DistributionNotFound: The 'pathlib2' distribution was not found and is required by ipython
It is because ipython2 (and also python2-pickleshare) now requires pathlib2 while Milky Way only ships pathlib (python2-pathlib package) which is deprecated upstream over pathlib2 and this package is also orphaned BTW.
python2-pathlib2 is available in Arch: https://www.archlinux.org/packages/community/any/python2-pathlib2/
It builds fine on hyperbola and once installed, ipython2 works fine. As of other packages currently depending on the legacy python2-pathlib, I checked them one by one and:
|
|
Testing | Update Request | Very Low | Medium | [lmms] update package version to 1.2.0 | Closed | |
Task Description
In the latest version, it has many more changes with new and improvement features, and fixes function issues since released as preview stage in every eight times per three years ago[1]. And also it is possible to rebuild package with sndio.
[1]: https://github.com/LMMS/lmms/releases/ (see all sections below from 1.2.0-RC1 to 1.2.0 in the version history releases)
|
|
Stable | Bug Report | Very Low | Medium | [sshguard] violates Hyperbola packaging standards | Closed | |
Task Description
Description: The sshguard package should have its /usr/bin/sshguard executable in /usr/sbin, has systemd service files and no OpenRC init script
Additional info: * sshguard-2.0.0-4 * when I run `sshguard`:
# sshguard
/usr/bin/sshguard: line 87: /usr/bin/journalctl: No such file or directory
* default /etc/sshguard.conf
LOGREADER="LANG=C /usr/bin/journalctl -afb -p info -n1 -t sshd -o cat"
BLACKLIST_FILE=120:/var/db/sshguard/blacklist.db
BACKEND="/usr/lib/sshguard/sshg-fw-iptables"
(commenting the first line temporally solves the issue)
|
|
Stable | Bug Report | Very Low | Medium | [fail2ban] remove systemd integration | Closed | |
Task Description
Description: This package has a strong systemd integration. It has a systemd backend to get files modifications:
(from /etc/fail2ban/jail.conf)
# systemd: uses systemd python library to access the systemd journal.
# Specifying "logpath" is not valid for this backend.
# See "journalmatch" in the jails associated filter config
and many files at /etc/fail2ban/filter.d have systemd stuff
[/etc/fail2ban/filter.d] [0]
$ grep -i systemd *
dovecot.conf:#journalmatch = _SYSTEMD_UNIT=dovecot.service
ejabberd-auth.conf:# Notes.: systemd journalctl style match filter for journal based backend
postfix.conf:journalmatch = _SYSTEMD_UNIT=postfix.service
postfix-sasl.conf:#journalmatch = _SYSTEMD_UNIT=postfix.service
pure-ftpd.conf:journalmatch = _SYSTEMD_UNIT=pure-ftpd.service + _COMM=pure-ftpd
recidive.conf:journalmatch = _SYSTEMD_UNIT=fail2ban.service PRIORITY=5
sshd.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
sshd-ddos.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
Additional info: * fail2ban-0.9.6-2.hyperbola3
|
|
Stable | Bug Report | Very Low | Medium | [fail2ban] uses old /usr/bin/sendmail location when it ... | Closed | |
Task Description
Description:
I saw errors in logs because fail2ban couldn’t find /usr/bin/sendmail, and discovered this:
[/etc/fail2ban] [0]
$ grep /usr/bin/sendmail */*
action.d/sendmail-buffered.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-geoip-lines.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipjailmatches.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipmatches.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-lines.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-matches.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
Please, also check for other binaries with wrong locations
As of now, the solution is as simple as removing this line → https://git.hyperbola.info:50100/packages/community.git/tree/fail2ban/PKGBUILD#n79
Additional info: * fail2ban-0.9.6-2.hyperbola3
|
|
Any | Bug Report | Very Low | Medium | [abiword] flickers | Closed | |
Task Description
the top part of any document it opens flickers like crazy like a strobing effect. I would appreciate it if this was fixed so that it wouldn’t do that. :)
In fact, just opening a blank document does this. ;/
|
|
Any | Implementation Request | Very Low | Medium | [SPF][postfix] implement pypolicyd-spf and postfix-poli ... | Closed | |
Task Description
Description: Hyperbola has the following SPF implementations: * libspf2 * perl-mail-spf * perl-mail-spf-query
However, none of them work out of the box with postfix. There’s postfix-policyd-spf-perl, which uses one the current perl implementations (perl-mail-spf), takes no time to build and all the dependencies are already satisfied with Hyperbola’s packages
Here I made a PKGBUILD that’s compliant with the packaging standards:
pkgname=postfix-policyd-spf-perl
pkgver=2.011
pkgrel=1
pkgdesc='Postfix SPF policy engine, written in Perl'
arch=(i686 x86_64)
url='https://launchpad.net/postfix-policyd-spf-perl/'
license=(GPL)
depends=(perl-mail-spf perl-netaddr-ip perl-sys-hostname-long)
source=("https://launchpad.net/postfix-policyd-spf-perl/trunk/${pkgver}/+download/${pkgname}-${pkgver}.tar.gz"{,.asc})
sha512sums=('22fc00bf74912056a67e937a460ac1fd878f1cb1a3bfa7b19bc5f1e6bc1c36d815dcf8c945e818d242ed5e72a6295bb0e1569446e06b09aefb2842993b8016ba'
'SKIP')
validpgpkeys=(E7729BFFBE85400FEEEE23B178D7DEFB9AD59AF1) # Scott Kitterman
package() {
cd "${pkgname}-${pkgver}"
install -Dm755 "${pkgname}" "${pkgdir}/usr/libexec/postfix/${pkgname}"
install -Dm644 CHANGES INSTALL README -t "${pkgdir}/usr/share/doc/${pkgname}"
install -Dm644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}
in the other hand, to give users the possibility of having more options, we could add pypolicyd-spf (AUR), which depends in pyspf (AUR) and other packages that Hyperbola has. In fact, ArchWiki talks about this implementation, but this might not be relevant.
|
|
Stable | Bug Report | Very Low | Medium | [postgrey] has systemd service and no OpenRC init scrip ... | Closed | |
Task Description
Description: The title says everything
Also, it doesn’t follow the FHS (/usr/bin/postgrey should be in /usr/sbin)
Additional info: * postgrey-1.37-1
|
|
Stable | Freedom Issue | Very Low | Medium | [xfe] Replace with Hyperbola Iceweasel-UXP for HTML and ... | Closed | |
Task Description
Two formats (including HTML and PHP) are provided to run semi-libre/free web browser Mozilla Firefox in the original code base, but it currently got blacklisted due to numerous branding, security and privacy issues, and replaced by the Hyperbola Iceweasel-UXP. To replace existing strings at the web section in xferc.in:
html = "iceweasel-uxp,iceweasel-uxp,<txteditor>;Hyper Text;html_32x32.png;html_16x16.png;;"
htm = "iceweasel-uxp,iceweasel-uxp,<txteditor>;Hyper Text;html_32x32.png;html_16x16.png;;"
php = "iceweasel-uxp,iceweasel-uxp,<txteditor>;PHP Source;html_32x32.png;html_16x16.png;;"
|
|
Stable | Implementation Request | Very Low | Medium | [gcc] Renew to version 8 or 9, including multilib | Closed | |
Task Description
As even the support for GCC 7 is now ending with the release of version 7.5 (https://gcc.gnu.org/ml/gcc/2019-11/msg00099.html) I’d like to propose a renewal of the building-stack - which I think is also needed in time. Also a renewal of the glibc would be good at all!
|
|
Any | Bug Report | Very Low | Medium | [hypervideo] soundcloud downloads display 401 unauthori ... | Closed | |
Task Description
An example:
$ hypervideo https://soundcloud.com/moshe-feiglin/wuh9dlykfhok [soundcloud] moshe-feiglin/wuh9dlykfhok: Downloading webpage [soundcloud] moshe-feiglin/wuh9dlykfhok: Downloading info JSON [soundcloud] 717666847: Downloading track url WARNING: Unable to download JSON metadata: HTTP Error 401: Unauthorized [soundcloud] 717666847: Checking fallback video format URL [soundcloud] 717666847: fallback video format URL is invalid, skipping ERROR: No video formats found;
Error: Nonfree Bytecode Required!
It's currently impossible to download this video with DRM.
Hypervideo protects your freedom by avoiding DRM and nonfree
bytecode parsing.
More info:
-
-
It works in latest youtube-dl (the 401 error does not appear). Not sure the soundcloud hypervideo downloader ever worked in hypervideo (it might require non-free scripts).
|
|
Any | Security Issue | Very Low | Medium | Download debian-fixes instead of relying on external so ... | Closed | |
Task Description
It happened already with minetest and again with prosody: When trying to build own packages with makepkg there are patches downloaded from the Debian-project. But the given HTTP(S)-sources are no longer available, concrete example within prosody to be found: https://deb.debian.org/debian/pool/main/p/prosody/prosody_0.10.2-1~bpo9+1.debian.tar.xz (not available)
Please don’t rely on those external sources when creating PKGBUILD-files or just give users the possibility for a secure and granted download. Therefore I cannot build prosody on my own now!
|
|
Any | Feature Request | Medium | Medium | [aspell-eo] Add new package | Closed | |
Task Description
Description:
Esperanto dictionary for aspell
Additional info: * https://ftp.gnu.org/gnu/aspell/dict/eo/
|
|
Stable | Bug Report | Very Low | Medium | linphonec error (cli version) | Closed | |
Task Description
Description: linphonec is unusable because a error produce a continuous log
Additional info: linphone 3.11.1-1.hyperbola1
Steps to reproduce: linphonec
Log: linphonec> 2019-12-15 19:25:58:010 ortp-error-Error in connect: Network is unreachable 2019-12-15 19:26:03:012 ortp-error-Error in connect: Network is unreachable 2019-12-15 19:26:08:018 ortp-error-Error in connect: Network is unreachable 2019-12-15 19:26:13:013 ortp-error-Error in connect: Network is unreachable 2019-12-15 19:26:18:016 ortp-error-Error in connect: Network is unreachable 2019-12-15 19:26:23:014 ortp-error-Error in connect: Network is unreachable 2019-12-15 19:26:28:010 ortp-error-Error in connect: Network is unreachable 2019-12-15 19:26:33:010 ortp-error-Error in connect: Network is unreachable 2019-12-15 19:26:38:012 ortp-error-Error in connect: Network is unreachable 2019-12-15 19:26:43:015 ortp-error-Error in connect: Network is unreachable 2019-12-15 19:26:48:010 ortp-error-Error in connect: Network is unreachable 2019-12-15 19:26:53:010 ortp-error-Error in connect: Network is unreachable
|
|
Any | Implementation Request | Very Low | Medium | [chdkptp] please add package to control Canon cameras | Closed | |
Task Description
CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.
Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.
Code is available via svn:
$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp
Copy chdkptp.sh and config.mk files to source tree then compile via make. chdkptp requires root privileges to connect to a camera.
|
|
Stable | Security Issue | Very Low | Medium | [git] Multiple CVEs | Closed | |
Task Description
CVE-2020-5260 has been fixed very recently in Debian, so I thought I would apply this patch. However, I found out that security patches have not been applied for quite a while (I could account for at least 6 CVEs).
Considering that the version in Debian stretch (2.11.0) is the nearest version with security patches released by Debian and that git project oldest supported version is 2.17, I have used patches from Debian stretch to apply on 2.12.2 currently in Milky Way.
But I have the following error on check():
| *** prove ***
|
| Test Summary Report
| -------------------
| t5570-git-daemon.sh (Wstat: 256 Tests: 20 Failed: 10)
| Failed tests: 3-7, 15-19
| Non-zero exit status: 1
| t5811-proto-disable-git.sh (Wstat: 256 Tests: 26 Failed: 16)
| Failed tests: 2-6, 9-11, 15-19, 21-23
| Non-zero exit status: 1
| Files=769, Tests=14137, 1101 wallclock secs ( 8.08 usr 1.12 sys + 144.48 cusr 63.42 csys = 217.10 CPU)
| Result: FAIL
| make[1]: *** [Makefile:45: prove] Error 1
| make[1]: Leaving directory '/build/git/src/git-2.12.2/t'
| make: *** [Makefile:2291: test] Error 2
| ==> ERROR: A failure occurred in check().
| Aborting...
This does not seem to be related to my change as the current version in Milky Way produces the same error (IOW the package currently in Milky Way is not rebuidable).
|
|
Any | Security Issue | Very Low | Medium | mount.davfs: unknown file system davfs due to paths cha ... | Closed | |
|
|
Stable | Bug Report | Very Low | Medium | Untrsuted gpg key | Closed | |
|
|
Stable | Update Request | Very Low | Medium | [varnish] Missing init script | Closed | |
|
|
Testing | Bug Report | Medium | Medium | [Hyperbola GNU/Linux-libre 0.4] - Package [xscreensaver ... | Closed | |
|
|
Stable | Bug Report | Very Low | Medium | nouveau_drv.so: undefined symbol: exaDriverAlloc | Closed | |
|
|
Testing | Feature Request | Very Low | Medium | [Hyperbola GNU/Linux-Libre 0.4] [lumina-core] Replace t ... | Closed | |
|
|
Testing | Bug Report | Very Low | Medium | [Hyperbola GNU/Linux-libre 0.4] [opensurge] has refused ... | Closed | |
|
|
Any | Bug Report | Very Low | Medium | sndio doesn't autostart on all my comps... | Closed | |
|
|
Testing | Bug Report | Medium | Medium | [Hyperbola GNU/Linux 0.4] Problems with touch- / trackp ... | Closed | |
|
|
Testing | Bug Report | Medium | Medium | [Hyperbola GNU/Linux 0.4] Problems with ALSA and sndio ... | Closed | |
|
|
Testing | Bug Report | Medium | Medium | [Hyperbola GNU/Linux-libre 0.4] - Package [android-file ... | Closed | |
|
|
Testing | Bug Report | Very Low | Medium | [adwaita-icon-theme] Most symbolic icons look brokenly ... | Closed | |
|
|
Testing | Bug Report | Very Low | Medium | [Hyperbola GNU/Linux-libre 0.4] [numptyphysics] has cra ... | Closed | |
|
|
Testing | Freedom Issue | Very Low | Medium | What Can A Pain Clinic Offer? | Closed | |
|
|
Testing | Bug Report | Very Low | Medium | [icu] needs to rebuild that should place genccode into ... | Closed | |
|
|
Testing | Feature Request | Very Low | Medium | [Hyperbola GNU/Linux-libre 0.4] [xorg-xdm] Replace the ... | Closed | |
|
|
Testing | Bug Report | Very Low | Medium | angband game Couldn't load the requested font. | Closed | |
|
|
Testing | Bug Report | Very Low | Medium | widelands game shared library error | Closed | |
|
|
Any | Bug Report | Very Low | Medium | wesnoth change language no works | Closed | |
|
|
Testing | Bug Report | Very Low | Medium | warzone2100 fail | Closed | |
|
|
Stable | Implementation Request | Very Low | Medium | [djview] Add new package | Closed | |
|
|
Any | Bug Report | Medium | Medium | [surf-2.1-1]: Unresolved dependencies | Closed | |
|
|
Stable | Bug Report | Very Low | Medium | [yeahwm] has crashed that refused to initialize. | Closed | |
|
|
Testing | Bug Report | Medium | Medium | [xfontsel] Problem with font handling | Closed | |
|
|
Any | Freedom Issue | Medium | Medium | [filesystem] Review of permissions | Unconfirmed | |
|