Packages

Description:

The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:

pacman -Ql rtkit
rtkit /etc/
rtkit /etc/dbus-1/
rtkit /etc/dbus-1/system.d/
rtkit /etc/dbus-1/system.d/org.freedesktop.RealtimeKit1.conf
rtkit /usr/
rtkit /usr/bin/
rtkit /usr/bin/rtkitctl
rtkit /usr/lib/
rtkit /usr/lib/rtkit/
rtkit /usr/lib/rtkit/rtkit-daemon
rtkit /usr/share/
rtkit /usr/share/dbus-1/
rtkit /usr/share/dbus-1/interfaces/
rtkit /usr/share/dbus-1/interfaces/org.freedesktop.RealtimeKit1.xml
rtkit /usr/share/dbus-1/system-services/
rtkit /usr/share/dbus-1/system-services/org.freedesktop.RealtimeKit1.service
rtkit /usr/share/licenses/
rtkit /usr/share/licenses/rtkit/
rtkit /usr/share/licenses/rtkit/COPYING
rtkit /usr/share/licenses/rtkit/LICENSE
rtkit /usr/share/man/
rtkit /usr/share/man/man8/
rtkit /usr/share/man/man8/rtkitctl.8.gz
rtkit /usr/share/polkit-1/
rtkit /usr/share/polkit-1/actions/
rtkit /usr/share/polkit-1/actions/org.freedesktop.RealtimeKit1.policy

* package version(s)
rtkit 0.11-1.hyperbola1

* config and/or log files etc.

Jun 26 10:41:50 gnu mtp-probe: checking bus 1, device 8: “/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4”
Jun 26 10:41:50 gnu mtp-probe: bus: 1, device: 8 was not an MTP device
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu pulseaudio[4401]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files

Steps to reproduce:

Description:

minidlna lacks openrc support and includes a systemd file

Additional info: none

Steps to reproduce:

$ sudo pacman -S minidlna
$ cat /usr/lib/systemd/system/minidlna.service

Description:

During the installation, a group error message is displayed.

Additional info:
* package version(s)

$ pacman -Si ntop
Repositorio               : community
Nombre                    : ntop
Versión                   : 5.0.1-11.hyperbola3
Descripción               : A network traffic probe that shows the network usage, with libressl and OpenRC support
Arquitectura              : x86_64
URL                       : https://www.ntop.org/
Licencias                 : GPL-3
Grupos                    : Nada
Provee                    : Nada
Depende de                : libevent  libpcap  gd  glibc libxml2  libressl  rrdtool  pcre geoip  lua  python2
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 21,33 MiB
Tamaño de la instalación  : 48,51 MiB
Encargado                 : HyperBuilder
                            <hyperbuilder@hyperbola.info>
Fecha de creación         : mié 27 mar 2019 17:09:11 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ ntop
Thu Jul 18 19:53:19 2019  Initializing gdbm databases
Thu Jul 18 19:53:19 2019  **ERROR** ....open of /var/lib/ntop/prefsCache.db failed: File open error
Thu Jul 18 19:53:19 2019  Possible solution: please use '-P <directory>'
Thu Jul 18 19:53:19 2019  **FATAL_ERROR** GDBM open failed, ntop shutting down...
Thu Jul 18 19:53:19 2019  CLEANUP[t140566150068416]: ntop caught signal 2 [state=2]
Thu Jul 18 19:53:19 2019  ntop is now quitting...

Steps to reproduce:

* Install package in Milky Way v0.3 Testing

In version 5.0.0 and 5.0.1, there are several added and changed (new or existing) features and functions, and fixed bug, crash and other issues.

See those two sections in the version history releases for more details: https://dev.minetest.net/Changelog

Description:

Ardour require rebuild in v0.3

Additional info:

Repositorio               : extra
Nombre                    : ardour
Versión                   : 5.8-1
Descripción               : Professional-grade digital audio workstation
Arquitectura              : x86_64
URL                       : http://ardour.org/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : liblrdf  liblo  lilv  suil  taglib  aubio  rubberband  gtkmm
Dependencias opcionales   : xjadeo: video monitoring
                            harvid: video timeline
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 8,31 MiB
Tamaño de la instalación  : 38,16 MiB
Encargado                 : Rashif Rahman (Ray) <schiv@archlinux.org>
Fecha de creación         : mié 26 abr 2017 02:45:34 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

$ ldd /usr/lib/ardour5/ardour-5.8.0 | grep 'not found'

	libardourcp.so => not found
	libcanvas.so.0 => not found
	libgtkmm2ext.so.0 => not found
	libptformat.so.0 => not found
	libardour.so.3 => not found
	libmidipp.so.4 => not found
	libevoral.so.0 => not found
	libaudiographer.so.0 => not found
	libpbd.so.4 => not found
	libtimecode.so => not found

Steps to reproduce:

* Install package in v0.3

See example:

hypervideo https://www.youtube.com/watch?v=3vpGZ69CBYM[youtube] 3vpGZ69CBYM: Downloading webpage
[youtube] 3vpGZ69CBYM: Downloading video info webpage
WARNING: Unable to extract video title
WARNING: Requested formats are incompatible for merge and will be merged into mkv.
[download] Destination: _-3vpGZ69CBYM.f137.mp4

Additional info:
* package version

Repositorio               : community
Nombre                    : clamtk
Versión                   : 5.24-1
Descripción               : Easy to use, light-weight, on-demand virus scanner for Linux
                            systems
Arquitectura              : any
URL                       : https://dave-theunsub.github.io/clamtk/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : clamav  perl  gtk2-perl  perl-locale-gettext  perl-libwww
                            perl-http-message  perl-lwp-protocol-https  perl-text-csv
                            perl-json  python  zenity  desktop-file-utils  gnome-icon-theme
                            cron
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 179,90 KiB
Tamaño de la instalación  : 1378,00 KiB
Encargado                 : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación         : sáb 19 nov 2016 20:25:20 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ clamtk
Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.

Steps to reproduce:

* Install clamtk in all version

This is a request to package nnn - a full-featured terminal file manager for low-end devices and the regular desktop.

nnn is available on Debian, Ubuntu (and family), Fedora, OpenSUSE and Arch Linux.

Homepage: https://github.com/jarun/nnn License: BSD 2-Clause

I would highly appreciate if nnn can be added to the repository.

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don’t think “steps to reproduce” to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

Patch for 4.9 : https://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch

AUR : https://aur.archlinux.org/packages/linux-mptcp/

https://github.com/loh-tar/wpa-cute/releases

I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.

I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)

or 2019 january. :)

WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:

https://wiki.archlinux.org/index.php/Wpa_supplicant:

Password-related problems

wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.

In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:

# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf

In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed.
Problems with eduroam and other MSCHAPv2 connections

This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.

but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.

It says it cannot get the status of wpa_supplicant when I load it.

This could be an issue if you get rid of NetworkManager for some users.

So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)

Description: The currently packaged version of QtCreator is built with SystemD support, and on v0.3 no longer works.

Steps to reproduce:

• pacman -S qtcreator
• qtcreator
• All plugins fail to load
• Receive following error message:

Cannot load plugin because dependency failed to load: ProjectExplorer(4.2.2)
Reason: /usr/lib/qtcreator/plugins/libProjectExplorer.so: Cannot load library /usr/lib/qtcreator/plugins/libProjectExplorer.so:
(libsystemd.so.0: cannot open shared object file: No such file or directory)

We need to see if it is possible to build binary without libsystemd.so or remove the package.

Since 0.3 release, i’m unable to mount my sshfs share from my desktop.

For reference, my fstab entry :

sshfs#anon@server:/srv/nfs/data /mnt/data fuse noauto,user,_netdev,x-gvfs-show,x-gvfs-name=data 0 0

When I double-click on the desktop icon (xfce), it says : “Impossible to mount data”

But, I’m able to mount the share if I enter the command manually in a terminal as user.

sshfs anon@server:/srv/nfs/data /mnt/data

So, it is not a problem of writing rights on mountpoint /mnt/data
I suspect an issue with fuse2 since it is a dependency of sshfs and it is in relation with mounting share from desktop.

It worked fine on the previous version of Hyperbola. The word user/username does not show up. A workaround is to wait 10 seconds and enter the username and click enter - then it will switch correctly to the password screen (otherwise you need to enter the username and password at least twice in order to successfully login).

I added
<quote>modules=”fs-fuse”</quote>
to /etc/conf.d/modules (and also “fuse” instead).

I looked in /var/log/rc.log and I see this line

<quote>modprobe: FATAL: Module fs-fusetun not found in directory /lib/modules/4.9.194-gnu-1-lts</quote>

It looks like modprobe added “tun” to the filename which prevents loading the module.

One can mount exfat by running commands such as “sudo modprobe fuse” and “sudo mount.exfat /dev/sdc1 /mnt/storage” but it is inconvenient.

Also, loading fuse at startup is problematic - see here:

https://issues.hyperbola.info/index.php?do=details&task_id=1433

ipython2 does not work with Milky Way (it used to work with the previous release):

$ ipython2
Traceback (most recent call last):
  File "/usr/bin/ipython2", line 6, in <module>
    from pkg_resources import load_entry_point
  File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3036, in <module>
    @_call_aside
  File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3020, in _call_aside
    f(*args, **kwargs)   
  File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3049, in _initialize_master_working_set
    working_set = WorkingSet._build_master()
  File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 654, in _build_master
    ws.require(__requires__)
  File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 968, in require 
    needed = self.resolve(parse_requirements(requirements))
  File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 854, in resolve 
    raise DistributionNotFound(req, requirers)
pkg_resources.DistributionNotFound: The 'pathlib2' distribution was not found and is required by ipython

It is because ipython2 (and also python2-pickleshare) now requires pathlib2 while Milky Way only ships pathlib (python2-pathlib package) which is deprecated upstream over pathlib2 and this package is also orphaned BTW.

python2-pathlib2 is available in Arch:
https://www.archlinux.org/packages/community/any/python2-pathlib2/

It builds fine on hyperbola and once installed, ipython2 works fine. As of other packages currently depending on the legacy python2-pathlib, I checked them one by one and:

• python2-pickleshare: Broken as it requires pathlib2 (same as ipython2).
• python2-pytest-benchmark: Does not use pathlib at all (neither in setuptools requires.txt nor in the source code).

In the latest version, it has many more changes with new and improvement features, and fixes function issues since released as preview stage in every eight times per three years ago[1]. And also it is possible to rebuild package with sndio.

[1]: https://github.com/LMMS/lmms/releases/ (see all sections below from 1.2.0-RC1 to 1.2.0 in the version history releases)

Description:
The sshguard package should have its /usr/bin/sshguard executable in /usr/sbin, has systemd service files and no OpenRC init script

Additional info:
* sshguard-2.0.0-4
* when I run `sshguard`:

# sshguard
/usr/bin/sshguard: line 87: /usr/bin/journalctl: No such file or directory

* default /etc/sshguard.conf

LOGREADER="LANG=C /usr/bin/journalctl -afb -p info -n1 -t sshd -o cat"
BLACKLIST_FILE=120:/var/db/sshguard/blacklist.db
BACKEND="/usr/lib/sshguard/sshg-fw-iptables"

(commenting the first line temporally solves the issue)

Description:
This package has a strong systemd integration. It has a systemd backend to get files modifications:

(from /etc/fail2ban/jail.conf)

# systemd:   uses systemd python library to access the systemd journal.
#              Specifying "logpath" is not valid for this backend.
#              See "journalmatch" in the jails associated filter config

and many files at /etc/fail2ban/filter.d have systemd stuff

[/etc/fail2ban/filter.d] [0]
$ grep -i systemd *
dovecot.conf:#journalmatch = _SYSTEMD_UNIT=dovecot.service
ejabberd-auth.conf:# Notes.:  systemd journalctl style match filter for journal based backend
postfix.conf:journalmatch = _SYSTEMD_UNIT=postfix.service
postfix-sasl.conf:#journalmatch = _SYSTEMD_UNIT=postfix.service
pure-ftpd.conf:journalmatch = _SYSTEMD_UNIT=pure-ftpd.service + _COMM=pure-ftpd
recidive.conf:journalmatch = _SYSTEMD_UNIT=fail2ban.service PRIORITY=5
sshd.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
sshd-ddos.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd

Additional info:
* fail2ban-0.9.6-2.hyperbola3

Description:

I saw errors in logs because fail2ban couldn’t find /usr/bin/sendmail, and discovered this:

[/etc/fail2ban] [0]
$ grep /usr/bin/sendmail */*
action.d/sendmail-buffered.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                 Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-geoip-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipjailmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-matches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>

Please, also check for other binaries with wrong locations

As of now, the solution is as simple as removing this line → https://git.hyperbola.info:50100/packages/community.git/tree/fail2ban/PKGBUILD#n79

Additional info:
* fail2ban-0.9.6-2.hyperbola3

the top part of any document it opens flickers like crazy like a strobing effect. I would appreciate it if this was fixed so that it wouldn’t do that. :)

In fact, just opening a blank document does this. ;/

Description:
Hyperbola has the following SPF implementations:
* libspf2
* perl-mail-spf
* perl-mail-spf-query

However, none of them work out of the box with postfix. There’s postfix-policyd-spf-perl, which uses one the current perl implementations (perl-mail-spf), takes no time to build and all the dependencies are already satisfied with Hyperbola’s packages

Here I made a PKGBUILD that’s compliant with the packaging standards:

pkgname=postfix-policyd-spf-perl
pkgver=2.011
pkgrel=1
pkgdesc='Postfix SPF policy engine, written in Perl'
arch=(i686 x86_64)
url='https://launchpad.net/postfix-policyd-spf-perl/'
license=(GPL)
depends=(perl-mail-spf perl-netaddr-ip perl-sys-hostname-long)
source=("https://launchpad.net/postfix-policyd-spf-perl/trunk/${pkgver}/+download/${pkgname}-${pkgver}.tar.gz"{,.asc})
sha512sums=('22fc00bf74912056a67e937a460ac1fd878f1cb1a3bfa7b19bc5f1e6bc1c36d815dcf8c945e818d242ed5e72a6295bb0e1569446e06b09aefb2842993b8016ba'
            'SKIP')
validpgpkeys=(E7729BFFBE85400FEEEE23B178D7DEFB9AD59AF1) # Scott Kitterman

package() {
  cd "${pkgname}-${pkgver}"

  install -Dm755 "${pkgname}" "${pkgdir}/usr/libexec/postfix/${pkgname}"
  install -Dm644 CHANGES INSTALL README -t "${pkgdir}/usr/share/doc/${pkgname}"
  install -Dm644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}

in the other hand, to give users the possibility of having more options, we could add pypolicyd-spf (AUR), which depends in pyspf (AUR) and other packages that Hyperbola has. In fact, ArchWiki talks about this implementation, but this might not be relevant.

Description:
The title says everything

Also, it doesn’t follow the FHS (/usr/bin/postgrey should be in /usr/sbin)

Additional info:
* postgrey-1.37-1

Two formats (including HTML and PHP) are provided to run semi-libre/free web browser Mozilla Firefox in the original code base, but it currently got blacklisted due to numerous branding, security and privacy issues, and replaced by the Hyperbola Iceweasel-UXP. To replace existing strings at the web section in xferc.in:

html = "iceweasel-uxp,iceweasel-uxp,<txteditor>;Hyper Text;html_32x32.png;html_16x16.png;;"
htm = "iceweasel-uxp,iceweasel-uxp,<txteditor>;Hyper Text;html_32x32.png;html_16x16.png;;"
php = "iceweasel-uxp,iceweasel-uxp,<txteditor>;PHP Source;html_32x32.png;html_16x16.png;;"