Packages

By default, the ‘disable-publishing’ parameter in the [publish] section of avahi-daemon.conf is set to ‘no’, which can be seen in my opinion as a privacy issue as avahi broadcasts the hostname without the user’s consent even though this has been explicitly disabled in the settings of networkmanager.

hello to all, I request that the developers of hyperbola develop the service of ‘fail2ban’, is an application that is used to protect servers.
I hope my request is positive, I thank you in advance.

Tried browsing videos in other YouTube client(s) such as mps-youtube. Minor problems, like/dislike ratio and category aren’t displaying of video metadata.

PyBitmessage is a secure p2p e-mail alternative. It could be useful to package it.

https://github.com/Bitmessage/PyBitmessage/releases https://aur.archlinux.org/packages/pybitmessage/ https://aur.archlinux.org/packages/pybitmessage-git/ (contains a firejail profile)

I think that line 12 of this file should be:

CMD_GRPCK="/usr/bin/grpck -r"

instead of:

CMD_GRPCK"/usr/bin/grpck -r"

cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency

Error message :

“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14.
BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”

After installing perl-text-charwidth, it works fine.

We seem to have a very old version of xscreensaver... Could you possibly update it?

this may be a security issue/privacy issue.

Replace RC_SVCDIR to RC_LOGDIR, like:

src/librc/rc.h.in
-----
 #define RC_LIBEXECDIR    "LIBEXECDIR@"
+#define RC_LOGDIR        "/var/log"
_____
src/rc/rc-logger.c
-----
-#define TMPLOG RC_SVCDIR "rc.log"
+#define TMPLOG RC_LOGDIR "rc.log"

dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:

* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
Device foobar-pv is still in use                                              [ !! ]

Contains:
/usr/lib/systemd/system/chrony.service
/usr/share/doc/chrony/examples/chrony-wait.service
/usr/share/doc/chrony/examples/chronyd.service

$ pacman -Si chrony
Repository : community
Name : chrony
Version : 3.1-1
Description : Lightweight NTP client and server
Architecture : x86_64
URL : http://chrony.tuxfamily.org/ Licenses : GPL Groups : None
Provides : None
Depends On : nss readline libcap libedit
Optional Deps : None
Conflicts With : None
Replaces : None
Download Size : 167.10 KiB
Installed Size : 421.00 KiB
Packager : Sergej Pupykin <pupykin.s+arch@gmail.com>
Build Date : Wed 01 Feb 2017 07:31:12 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature

pacman -Ql chrony
chrony /etc/
chrony /etc/chrony.conf
chrony /usr/
chrony /usr/bin/
chrony /usr/bin/chronyc
chrony /usr/bin/chronyd
chrony /usr/lib/
chrony /usr/lib/systemd/
chrony /usr/lib/systemd/system/
chrony /usr/lib/systemd/system/chrony.service
chrony /usr/share/
chrony /usr/share/doc/
chrony /usr/share/doc/chrony/
chrony /usr/share/doc/chrony/chrony.conf.html
chrony /usr/share/doc/chrony/chronyc.html
chrony /usr/share/doc/chrony/chronyd.html
chrony /usr/share/doc/chrony/examples/
chrony /usr/share/doc/chrony/examples/chrony-wait.service
chrony /usr/share/doc/chrony/examples/chrony.conf.example1
chrony /usr/share/doc/chrony/examples/chrony.conf.example2
chrony /usr/share/doc/chrony/examples/chrony.conf.example3
chrony /usr/share/doc/chrony/examples/chrony.keys.example
chrony /usr/share/doc/chrony/examples/chrony.logrotate
chrony /usr/share/doc/chrony/examples/chrony.nm-dispatcher
chrony /usr/share/doc/chrony/examples/chrony.spec chrony /usr/share/doc/chrony/examples/chronyd.service
chrony /usr/share/doc/chrony/faq.html
chrony /usr/share/doc/chrony/installation.html
chrony /usr/share/man/
chrony /usr/share/man/man1/
chrony /usr/share/man/man1/chronyc.1.gz
chrony /usr/share/man/man5/
chrony /usr/share/man/man5/chrony.conf.5.gz
chrony /usr/share/man/man8/
chrony /usr/share/man/man8/chronyd.8.gz
chrony /var/
chrony /var/lib/
chrony /var/lib/chrony/

This message comes out when using the userdel, useradd, gpasswd.

Configuration error, unknown "FAIL_DELAY" element (report to administrator)

Possible solution

Hi guys, I have ever run into a Brother brand printer model DCPT500W[0], and I have seen that the source code for the drivers under GPLv3 license is available.

I also see that there is a file brother_dcpt500w_printer_en.ppd, which is important for cups, which is why it may be necessary to integrate it into the cups, as long as the drivers are Libre.

[0]:https://download.brother.com/welcome/dlf101963/dcpt500w_cupswrapper_GPL_source_3.0.2-0.tar.gz

Hello,

Could it be possible to add this package :

arm-linux-gnueabihf-gcc

“The GNU Compiler Collection (arm-linux-gnueabihf)”

Also requires :

arm-linux-gnueabihf-binutils (A set of programs to assemble and manipulate binary and object files)
arm-linux-gnueabihf-glibc (GNU C Library)

https://aur.archlinux.org/packages/arm-linux-gnueabihf-gcc/

License : GPL

Thanks

pacman -Si

Dépôt                    : community
Nom                      : create_ap
Version                  : 0.4.6-1
Description              : A shell script to create a NATed/Bridged Software Access Point
Architecture             : any
URL                      : https://github.com/oblique/create_ap
Licences                 : BSD
Groupes                  : --
Fournit                  : --
Dépend de                : bash  hostapd  iproute2  iw  dnsmasq  iptables  util-linux  procps-ng
Dépendances opt.         : haveged: boost low entropy
Est en conflit avec      : --
Remplace                 : --
Taille du téléchargement : 17,61 KiB
Taille installée         : 63,00 KiB
Paqueteur                : NicoHood <nicohood@archlinux.org>
Compilé le               : sam. 11 févr. 2017 10:53:08 CET
Validé par               : Somme MD5  Somme SHA-256  Signature

pacman -Ql

create_ap /etc/
create_ap /etc/create_ap.conf
create_ap /usr/
create_ap /usr/bin/
create_ap /usr/bin/create_ap
create_ap /usr/lib/
create_ap /usr/lib/systemd/
create_ap /usr/lib/systemd/system/
create_ap /usr/lib/systemd/system/create_ap.service
create_ap /usr/share/
create_ap /usr/share/bash-completion/
create_ap /usr/share/bash-completion/completions/
create_ap /usr/share/bash-completion/completions/create_ap
create_ap /usr/share/doc/
create_ap /usr/share/doc/create_ap/
create_ap /usr/share/doc/create_ap/README.md
create_ap /usr/share/licenses/
create_ap /usr/share/licenses/create_ap/
create_ap /usr/share/licenses/create_ap/LICENSE

pacman -Si

Nom                      : iperf
Version                  : 2.0.9-1
Description              : A tool to measure maximum TCP bandwidth
Architecture             : x86_64
URL                      : https://sourceforge.net/projects/iperf2/
Licences                 : custom
Groupes                  : --
Fournit                  : --
Dépend de                : gcc-libs
Dépendances opt.         : --
Requis par               : --
Optionnel pour           : --
Est en conflit avec      : --
Remplace                 : --
Taille installée         : 88,00 KiB
Paqueteur                : Sébastien Luttringer <seblu@seblu.net>
Compilé le               : dim. 09 oct. 2016 14:14:34 CEST
Installé le              : ven. 04 mai 2018 17:13:21 CEST
Motif d’installation     : Explicitement installé
Script d’installation    : Oui
Validé par               : Signature

pacman -Ql

iperf /usr/
iperf /usr/bin/
iperf /usr/bin/iperf
iperf /usr/lib/
iperf /usr/lib/systemd/
iperf /usr/lib/systemd/system/
iperf /usr/lib/systemd/system/iperf-tcp.service
iperf /usr/lib/systemd/system/iperf-udp.service
iperf /usr/share/
iperf /usr/share/licenses/
iperf /usr/share/licenses/iperf/
iperf /usr/share/licenses/iperf/LICENSE
iperf /usr/share/man/
iperf /usr/share/man/man1/
iperf /usr/share/man/man1/iperf.1.gz

pacman -Si

Dépôt                    : community
Nom                      : gammu
Version                  : 1.38.2-1
Description              : GNU All Mobile Management Utilities
Architecture             : x86_64
URL                      : http://wammu.eu/gammu/
Licences                 : GPL
Groupes                  : --
Fournit                  : --
Dépend de                : glib2  bluez-libs  curl  libmariadbclient  postgresql-libs  libusb
                           libgudev
Dépendances opt.         : dialog: support for the gammu-config script
                           python2: for python bindings
Est en conflit avec      : --
Remplace                 : --
Taille du téléchargement : 1167,86 KiB
Taille installée         : 4798,00 KiB
Paqueteur                : Jaroslav Lichtblau <svetlemodry@archlinux.org>
Compilé le               : mar. 11 avril 2017 15:16:32 CEST
Validé par               : Somme MD5  Somme SHA-256  Signature

pacman -Ql gammu | grep /usr/lib/

gammu /usr/lib/
gammu /usr/lib/libGammu.so
gammu /usr/lib/libGammu.so.8
gammu /usr/lib/libGammu.so.8.1.38.2
gammu /usr/lib/libgsmsd.so
gammu /usr/lib/libgsmsd.so.8
gammu /usr/lib/libgsmsd.so.8.1.38.2
gammu /usr/lib/pkgconfig/
gammu /usr/lib/pkgconfig/gammu-smsd.pc
gammu /usr/lib/pkgconfig/gammu.pc
gammu /usr/lib/systemd/
gammu /usr/lib/systemd/system/
gammu /usr/lib/systemd/system/gammu-smsd.service

Hi,

Would be nice to add etherpad-lite to our pacman.

https://github.com/ether/etherpad-lite

https://aur.archlinux.org/packages/etherpad-lite/

New versión v2.2.7

References:

• https://github.com/apple/cups/releases/tag/v2.2.7
• https://security-tracker.debian.org/tracker/source-package/cups
• https://debian.simnet.is/debian/pool/main/c/cups/cups_2.2.7-3.debian.tar.xz

This is another addon I would like support indefinitely for Iceweasel-UXP:

It blocks etag tracking and other nasty forms of tracking.

But again, you would need to make the changes based on the newer versions only for legacy and without WebExt required of course.

Hello,

I recently acquired a T400 Thinkpad with 1440×900 panel.
On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.

Both Thinkpad are running the same Hyperbola installation :

Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf)
Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message)
video driver : modesetting
DE : xfce4 with xfwm4

On the Thinkpad x200, everything works great, no issue to report.

On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :

hpd interrupt storm detected on connector hdmi-a-1

And the display (and sound) freezes for 10 seconds (sometimes more !)

As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.

Results :

With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo.
With 4.16.8 : Issue is not present ! No more freeze !

I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series.
Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.

Thanks for your help

Bug error:

Error: it was not possible to load the plugin "/usr/lib/weechat/plugins/guile.so": libguile-2.0.so.22: the file of the shared object can not be opened: The file or the directory does not exist

Package information

$ sudo pacman -Si weechat
Repositorio               : community
Nombre                    : weechat
Versión                   : 1.7.1-4
Descripción               : Fast, light and extensible IRC client (curses UI)
Arquitectura              : x86_64
URL                       : http://www.weechat.org/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : gnutls  curl  libgcrypt
Dependencias opcionales   : perl
                            python2
                            lua
                            tcl
                            ruby
                            aspell
                            guile2.0
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1916,09 KiB
Tamaño de la instalación  : 17756,00 KiB
Encargado                 : Christian Rebischke <Chris.Rebischke@archlinux.org>
Fecha de creación         : lun 24 abr 2017 10:48:25 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

sudo pacman -Ql weechat
weechat /usr/
weechat /usr/bin/
weechat /usr/bin/weechat
weechat /usr/bin/weechat-curses
weechat /usr/include/
weechat /usr/include/weechat/
weechat /usr/include/weechat/weechat-plugin.h
weechat /usr/lib/
weechat /usr/lib/pkgconfig/
weechat /usr/lib/pkgconfig/weechat.pc
weechat /usr/lib/weechat/
weechat /usr/lib/weechat/plugins/
weechat /usr/lib/weechat/plugins/alias.so
weechat /usr/lib/weechat/plugins/aspell.so
weechat /usr/lib/weechat/plugins/charset.so
weechat /usr/lib/weechat/plugins/exec.so
weechat /usr/lib/weechat/plugins/fifo.so
weechat /usr/lib/weechat/plugins/guile.so
weechat /usr/lib/weechat/plugins/irc.so
weechat /usr/lib/weechat/plugins/logger.so
weechat /usr/lib/weechat/plugins/lua.so
weechat /usr/lib/weechat/plugins/perl.so
weechat /usr/lib/weechat/plugins/python.so
weechat /usr/lib/weechat/plugins/relay.so
weechat /usr/lib/weechat/plugins/ruby.so
weechat /usr/lib/weechat/plugins/script.so
weechat /usr/lib/weechat/plugins/tcl.so
weechat /usr/lib/weechat/plugins/trigger.so
weechat /usr/lib/weechat/plugins/xfer.so
weechat /usr/share/
weechat /usr/share/doc/
weechat /usr/share/doc/weechat/
weechat /usr/share/doc/weechat/weechat_dev.en.html
weechat /usr/share/doc/weechat/weechat_dev.fr.html
weechat /usr/share/doc/weechat/weechat_dev.ja.html
weechat /usr/share/doc/weechat/weechat_faq.de.html
weechat /usr/share/doc/weechat/weechat_faq.en.html
weechat /usr/share/doc/weechat/weechat_faq.fr.html
weechat /usr/share/doc/weechat/weechat_faq.it.html
weechat /usr/share/doc/weechat/weechat_faq.ja.html
weechat /usr/share/doc/weechat/weechat_faq.pl.html
weechat /usr/share/doc/weechat/weechat_plugin_api.en.html
weechat /usr/share/doc/weechat/weechat_plugin_api.fr.html
weechat /usr/share/doc/weechat/weechat_plugin_api.it.html
weechat /usr/share/doc/weechat/weechat_plugin_api.ja.html
weechat /usr/share/doc/weechat/weechat_quickstart.cs.html
weechat /usr/share/doc/weechat/weechat_quickstart.de.html
weechat /usr/share/doc/weechat/weechat_quickstart.en.html
weechat /usr/share/doc/weechat/weechat_quickstart.es.html
weechat /usr/share/doc/weechat/weechat_quickstart.fr.html
weechat /usr/share/doc/weechat/weechat_quickstart.it.html
weechat /usr/share/doc/weechat/weechat_quickstart.ja.html
weechat /usr/share/doc/weechat/weechat_quickstart.pl.html
weechat /usr/share/doc/weechat/weechat_quickstart.ru.html
weechat /usr/share/doc/weechat/weechat_relay_protocol.en.html
weechat /usr/share/doc/weechat/weechat_relay_protocol.fr.html
weechat /usr/share/doc/weechat/weechat_relay_protocol.ja.html
weechat /usr/share/doc/weechat/weechat_scripting.de.html
weechat /usr/share/doc/weechat/weechat_scripting.en.html
weechat /usr/share/doc/weechat/weechat_scripting.fr.html
weechat /usr/share/doc/weechat/weechat_scripting.it.html
weechat /usr/share/doc/weechat/weechat_scripting.ja.html
weechat /usr/share/doc/weechat/weechat_scripting.pl.html
weechat /usr/share/doc/weechat/weechat_tester.de.html
weechat /usr/share/doc/weechat/weechat_tester.en.html
weechat /usr/share/doc/weechat/weechat_tester.fr.html
weechat /usr/share/doc/weechat/weechat_tester.it.html
weechat /usr/share/doc/weechat/weechat_tester.ja.html
weechat /usr/share/doc/weechat/weechat_tester.pl.html
weechat /usr/share/doc/weechat/weechat_user.de.html
weechat /usr/share/doc/weechat/weechat_user.en.html
weechat /usr/share/doc/weechat/weechat_user.fr.html
weechat /usr/share/doc/weechat/weechat_user.it.html
weechat /usr/share/doc/weechat/weechat_user.ja.html
weechat /usr/share/doc/weechat/weechat_user.pl.html
weechat /usr/share/icons/
weechat /usr/share/icons/hicolor/
weechat /usr/share/icons/hicolor/32x32/
weechat /usr/share/icons/hicolor/32x32/apps/
weechat /usr/share/icons/hicolor/32x32/apps/weechat.png
weechat /usr/share/locale/
weechat /usr/share/locale/cs/
weechat /usr/share/locale/cs/LC_MESSAGES/
weechat /usr/share/locale/cs/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/de/
weechat /usr/share/locale/de/LC_MESSAGES/
weechat /usr/share/locale/de/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/es/
weechat /usr/share/locale/es/LC_MESSAGES/
weechat /usr/share/locale/es/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/fr/
weechat /usr/share/locale/fr/LC_MESSAGES/
weechat /usr/share/locale/fr/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/hu/
weechat /usr/share/locale/hu/LC_MESSAGES/
weechat /usr/share/locale/hu/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/it/
weechat /usr/share/locale/it/LC_MESSAGES/
weechat /usr/share/locale/it/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/ja/
weechat /usr/share/locale/ja/LC_MESSAGES/
weechat /usr/share/locale/ja/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/pl/
weechat /usr/share/locale/pl/LC_MESSAGES/
weechat /usr/share/locale/pl/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/pt/
weechat /usr/share/locale/pt/LC_MESSAGES/
weechat /usr/share/locale/pt/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/pt_BR/
weechat /usr/share/locale/pt_BR/LC_MESSAGES/
weechat /usr/share/locale/pt_BR/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/ru/
weechat /usr/share/locale/ru/LC_MESSAGES/
weechat /usr/share/locale/ru/LC_MESSAGES/weechat.mo
weechat /usr/share/locale/tr/
weechat /usr/share/locale/tr/LC_MESSAGES/
weechat /usr/share/locale/tr/LC_MESSAGES/weechat.mo
weechat /usr/share/man/
weechat /usr/share/man/cs/
weechat /usr/share/man/cs/man1/
weechat /usr/share/man/cs/man1/weechat.1.gz
weechat /usr/share/man/de/
weechat /usr/share/man/de/man1/
weechat /usr/share/man/de/man1/weechat.1.gz
weechat /usr/share/man/fr/
weechat /usr/share/man/fr/man1/
weechat /usr/share/man/fr/man1/weechat.1.gz
weechat /usr/share/man/it/
weechat /usr/share/man/it/man1/
weechat /usr/share/man/it/man1/weechat.1.gz
weechat /usr/share/man/ja/
weechat /usr/share/man/ja/man1/
weechat /usr/share/man/ja/man1/weechat.1.gz
weechat /usr/share/man/man1/
weechat /usr/share/man/man1/weechat.1.gz
weechat /usr/share/man/pl/
weechat /usr/share/man/pl/man1/
weechat /usr/share/man/pl/man1/weechat.1.gz
weechat /usr/share/man/ru/
weechat /usr/share/man/ru/man1/
weechat /usr/share/man/ru/man1/weechat.1.gz

References:

• https://bugs.archlinux.org/task/36924
• https://github.com/weechat/weechat/issues/1098
• https://bbs.archlinux.org/viewtopic.php?id=231592

Hello,

When mounting an NFS share, I get a warning about missing idmpad.conf

rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...

Debian includes a default config file for idmap :

[General]

Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain

[Mapping]

Nobody-User = nobody
Nobody-Group = nogroup

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

As per a user report (https://forums.hyperbola.info/viewtopic.php?id=92), DDG is USA based search engine and is blocking Tor users (https://trac.torproject.org/projects/tor/ticket/23648).
They are also using non-free JS on the default search.

It seems the best way to solve this is to use their “html” hidden service since it conceals the user IP, doesn’t block Tor users by default, and doesn’t need JS. https://3g2upl4pq6kufc4m.onion/html/

This will affect multiple applications that are currently using DuckDuckGo. The alternative is to remove it completely, but it still is a better option than Google et. all for privacy...

Latest samba has wrong permissions on /etc/conf.d folder, that is 644 whereas it should be 755.