Packages

As per this bug report the MEGA plugin cannot be compiled using the OpenSSL version provided in hyperbola.

https://github.com/mcrapet/plowshare-module-mega/issues/18

This described solution works (I successfully upgraded the package to version 1.0.2r).

  Install the openssl-1.0 package.
  Run ./configure with the following arguments:

./configure –enable-local OPENSSL_LIBS=’-L/usr/lib/openssl-1.0 -lssl -lcrypto’ OPENSSL_CFLAGS=’-I/usr/include/openssl-1.0’

  run make

Unfortunately this solution (upgrading openssl-1.0) breaks some other packages such as phantomjs and avidemux, so it would be great if the package could be upgraded by Hyperbola’s developers alongside all its dependencies.

Install the base system again in a pc, but when installing some packages there is the error that I describe below. I would ask please correct this problem since you can not install several programs, example: emacs, volumeicon, etc

invalid or corrupted package (PGP signature)).
error: adwaita-icon-theme: signature from “scott sradms0@openmailbox.org” is unknown trust
:: File /var/cache/pacman/pkg/adwaita-icon-theme-3.24.0-1.hyperbola1-any.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).

Description:

The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:

pacman -Ql rtkit
rtkit /etc/
rtkit /etc/dbus-1/
rtkit /etc/dbus-1/system.d/
rtkit /etc/dbus-1/system.d/org.freedesktop.RealtimeKit1.conf
rtkit /usr/
rtkit /usr/bin/
rtkit /usr/bin/rtkitctl
rtkit /usr/lib/
rtkit /usr/lib/rtkit/
rtkit /usr/lib/rtkit/rtkit-daemon
rtkit /usr/share/
rtkit /usr/share/dbus-1/
rtkit /usr/share/dbus-1/interfaces/
rtkit /usr/share/dbus-1/interfaces/org.freedesktop.RealtimeKit1.xml
rtkit /usr/share/dbus-1/system-services/
rtkit /usr/share/dbus-1/system-services/org.freedesktop.RealtimeKit1.service
rtkit /usr/share/licenses/
rtkit /usr/share/licenses/rtkit/
rtkit /usr/share/licenses/rtkit/COPYING
rtkit /usr/share/licenses/rtkit/LICENSE
rtkit /usr/share/man/
rtkit /usr/share/man/man8/
rtkit /usr/share/man/man8/rtkitctl.8.gz
rtkit /usr/share/polkit-1/
rtkit /usr/share/polkit-1/actions/
rtkit /usr/share/polkit-1/actions/org.freedesktop.RealtimeKit1.policy

* package version(s)
rtkit 0.11-1.hyperbola1

* config and/or log files etc.

Jun 26 10:41:50 gnu mtp-probe: checking bus 1, device 8: “/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4”
Jun 26 10:41:50 gnu mtp-probe: bus: 1, device: 8 was not an MTP device
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu pulseaudio[4401]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files

Steps to reproduce:

Description:
notmuch-mutt fails to compile without perl-mail-message which is missing in Hyperbola

Steps to reproduce:
Install notmuch-mutt and try `notmuch-mutt` at the command line. Then install `perl-mail-message` from Arch and try again.

Description:

During the installation, a group error message is displayed.

Additional info:
* package version(s)

$ pacman -Si ntop
Repositorio               : community
Nombre                    : ntop
Versión                   : 5.0.1-11.hyperbola3
Descripción               : A network traffic probe that shows the network usage, with libressl and OpenRC support
Arquitectura              : x86_64
URL                       : https://www.ntop.org/
Licencias                 : GPL-3
Grupos                    : Nada
Provee                    : Nada
Depende de                : libevent  libpcap  gd  glibc libxml2  libressl  rrdtool  pcre geoip  lua  python2
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 21,33 MiB
Tamaño de la instalación  : 48,51 MiB
Encargado                 : HyperBuilder
                            <hyperbuilder@hyperbola.info>
Fecha de creación         : mié 27 mar 2019 17:09:11 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ ntop
Thu Jul 18 19:53:19 2019  Initializing gdbm databases
Thu Jul 18 19:53:19 2019  **ERROR** ....open of /var/lib/ntop/prefsCache.db failed: File open error
Thu Jul 18 19:53:19 2019  Possible solution: please use '-P <directory>'
Thu Jul 18 19:53:19 2019  **FATAL_ERROR** GDBM open failed, ntop shutting down...
Thu Jul 18 19:53:19 2019  CLEANUP[t140566150068416]: ntop caught signal 2 [state=2]
Thu Jul 18 19:53:19 2019  ntop is now quitting...

Steps to reproduce:

* Install package in Milky Way v0.3 Testing

Description:

Ardour require rebuild in v0.3

Additional info:

Repositorio               : extra
Nombre                    : ardour
Versión                   : 5.8-1
Descripción               : Professional-grade digital audio workstation
Arquitectura              : x86_64
URL                       : http://ardour.org/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : liblrdf  liblo  lilv  suil  taglib  aubio  rubberband  gtkmm
Dependencias opcionales   : xjadeo: video monitoring
                            harvid: video timeline
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 8,31 MiB
Tamaño de la instalación  : 38,16 MiB
Encargado                 : Rashif Rahman (Ray) <schiv@archlinux.org>
Fecha de creación         : mié 26 abr 2017 02:45:34 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

$ ldd /usr/lib/ardour5/ardour-5.8.0 | grep 'not found'

	libardourcp.so => not found
	libcanvas.so.0 => not found
	libgtkmm2ext.so.0 => not found
	libptformat.so.0 => not found
	libardour.so.3 => not found
	libmidipp.so.4 => not found
	libevoral.so.0 => not found
	libaudiographer.so.0 => not found
	libpbd.so.4 => not found
	libtimecode.so => not found

Steps to reproduce:

* Install package in v0.3

See example:

hypervideo https://www.youtube.com/watch?v=3vpGZ69CBYM[youtube] 3vpGZ69CBYM: Downloading webpage
[youtube] 3vpGZ69CBYM: Downloading video info webpage
WARNING: Unable to extract video title
WARNING: Requested formats are incompatible for merge and will be merged into mkv.
[download] Destination: _-3vpGZ69CBYM.f137.mp4

Description:

crontab -e
/bin/sh: /usr/bin/nano: No existe el fichero o el directorio
crontab: "/usr/bin/nano" exited with status 127

Additional info:

Repositorio               : core
Nombre                    : cronie
Versión                   : 1.5.1-1.hyperbola6
Descripción               : Daemon that runs specified programs at scheduled times and related
                            tools, with logger recommendation and OpenRC support
Arquitectura              : x86_64
URL                       : https://github.com/cronie-crond/cronie/
Licencias                 : ISC
Grupos                    : Nada
Provee                    : cron
Depende de                : pam  bash  run-parts
Dependencias opcionales   : smtp-server: send job output via email
                            smtp-forwarder: forward job output to email server
                            logger: message logging support
En conflicto con          : cron
Remplaza a                : Nada
Tamaño de la descarga     : 69,08 KiB
Tamaño de la instalación  : 266,00 KiB
Encargado                 : HyperBuilder <hyperbuilder@hyperbola.info>
Fecha de creación         : mié 02 ene 2019 03:03:57 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Steps to reproduce:

* Install cronie in v0.3

Additional info:
* package version

Repositorio               : community
Nombre                    : clamtk
Versión                   : 5.24-1
Descripción               : Easy to use, light-weight, on-demand virus scanner for Linux
                            systems
Arquitectura              : any
URL                       : https://dave-theunsub.github.io/clamtk/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : clamav  perl  gtk2-perl  perl-locale-gettext  perl-libwww
                            perl-http-message  perl-lwp-protocol-https  perl-text-csv
                            perl-json  python  zenity  desktop-file-utils  gnome-icon-theme
                            cron
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 179,90 KiB
Tamaño de la instalación  : 1378,00 KiB
Encargado                 : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación         : sáb 19 nov 2016 20:25:20 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ clamtk
Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.

Steps to reproduce:

* Install clamtk in all version

Description:

groff is typesetting system similar to TeX/LaTeX however, it is very small and very usable. It is not built properly with URW fonts, or such are missing, I cannot know all details. Overall groff package is basically somehow broken.

It shall depend on proper fonts, and such fonts should already be built, including their Unicode versions.

Package is only partially built.

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don’t think “steps to reproduce” to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

Description: The currently packaged version of QtCreator is built with SystemD support, and on v0.3 no longer works.

Steps to reproduce:

• pacman -S qtcreator
• qtcreator
• All plugins fail to load
• Receive following error message:

Cannot load plugin because dependency failed to load: ProjectExplorer(4.2.2)
Reason: /usr/lib/qtcreator/plugins/libProjectExplorer.so: Cannot load library /usr/lib/qtcreator/plugins/libProjectExplorer.so:
(libsystemd.so.0: cannot open shared object file: No such file or directory)

We need to see if it is possible to build binary without libsystemd.so or remove the package.

Description:

I may be wrong for I did not migrate to 0.3 as of yet, but I think that `msmtp` has been forgotten and needs to be recompiled with `libressl`.

Please remove this report if I am mistaken.

Description:

I may be wrong for I did not migrate to 0.3 as of yet, but I think that `msmtp` has been forgotten and needs to be recompiled with `libressl`.

Please remove this report if I am mistaken.

In `/etc/logrotate.d/rsyslog`, line 5:

/usr/bin/killall -HUP /usr/bin/rsyslogd

should now read as follows:

/usr/bin/killall -HUP /usr/sbin/rsyslogd

As the default path of the ServerBin directory is now /usr/libexec/bin:
1. cups-files.conf should be modified/adapted accordingly.
2. The contents of /usr/lib/cups which is currently owned by cups-filters, cups-pdf foomatic-db-engine and smbclient should be moved to /usr/libexec/cups.

As it is, cups doesn’t work in v0.3.

With latest 0.3 hyperbola, with the (simple) following partitioning :

/ (ext4)
/swap

The standard HOOK in /etc/mkinitcpio.conf

"HOOKS="base udev autodetect modconf block filesystems keyboard fsck"

fails to include crc32c_generic module, resulting in non bootable system.

The generated fallback initramfs include it though.

The issue was not present with 0.2.9, with the exact same partitioning.

[virt-manager] Failed to initialize a valid firewall backend

I cannot start any virtual machine with current virt-manager.
The error message is the following :

Failed to initialize a valid firewall backend

My username is in “kvm” group.

The only modification to the libvirt config files I made are in /etc/libvirt/qemu.conf

[...]
# Some examples of valid values are:
#
#       user = "qemu"   # A user named "qemu"
#       user = "+0"     # Super user (uid=0)
#       user = "100"    # A user named "100" or a user with uid=100
# 
#user = "root"
user = "david"
[...]

The libvirtd service is enabled (and start without error)
Also, the optional dependencies are correctly installed :

ebtables: required for default NAT networking [installed]
dnsmasq: required for default NAT/DHCP for guests [installed]
bridge-utils: for bridged networking [installed]

This was working fine previously (with 0.2.9) so I don’t know why this isn’t working anymore. As said previously, my config hasn’t changed.

Since 0.3 release, i’m unable to mount my sshfs share from my desktop.

For reference, my fstab entry :

sshfs#anon@server:/srv/nfs/data /mnt/data fuse noauto,user,_netdev,x-gvfs-show,x-gvfs-name=data 0 0

When I double-click on the desktop icon (xfce), it says : “Impossible to mount data”

But, I’m able to mount the share if I enter the command manually in a terminal as user.

sshfs anon@server:/srv/nfs/data /mnt/data

So, it is not a problem of writing rights on mountpoint /mnt/data
I suspect an issue with fuse2 since it is a dependency of sshfs and it is in relation with mounting share from desktop.

Some addons are currently broken with latest iceweasel-uxp (iceweasel-uxp 52.9.20190926-1)

DownThemAll
Save to Wayback Machine
Self-Destructing Cookies
(and probably others)

g4jc suggested to drop PGO as it could be the culprit.

https://forums.hyperbola.info/viewtopic.php?pid=1149#p1149

Regarding addons, I'm fairly certain flipping the switch on PGO (which makes the browser faster at the expense of wrecking code) is the culprit. We were warned not to use it, and this is planned to be rolled back.

However, Hyperbot has to be scheduled to rebuild the packages and I do not set it's schedule. Will advise.

With : v4l-utils 1.12.3-1.hyperbola1

dvb5-scan utility currently segfaults with rtl2832

*** Error in `dvbv5-scan': double free or corruption (fasttop): 0x000000000090be90 ***
======= Backtrace: =========
/lib/libc.so.6(+0x727ad)[0x7f4f9a9657ad]
/lib/libc.so.6(+0x78e6f)[0x7f4f9a96be6f]
/lib/libc.so.6(+0x796ce)[0x7f4f9a96c6ce]
/usr/lib/libdvbv5.so.0(free_dvb_dev+0x13)[0x7f4f9acafa53]
/usr/lib/libdvbv5.so.0(dvb_dev_free_devices+0x28)[0x7f4f9acafaf8]
/usr/lib/libdvbv5.so.0(dvb_dev_free+0x4e)[0x7f4f9acafe2e]
dvbv5-scan[0x401729]
/lib/libc.so.6(__libc_start_main+0xf1)[0x7f4f9a9135a1]
dvbv5-scan[0x4019fa]

This seems to have been fixed, see :

https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=859008

I don’t know if a patch is available for it though..

It worked fine on the previous version of Hyperbola. The word user/username does not show up. A workaround is to wait 10 seconds and enter the username and click enter - then it will switch correctly to the password screen (otherwise you need to enter the username and password at least twice in order to successfully login).

With lynis 2.4.8-1.hyperbola2

sudo lynis audit system remote 192.168.0.100

fails because dmidecode is not installed to /usr/sbin/ :

/usr/share/lynis/include/functions: line 1359: /usr/sbin/dmidecode: No such file or directory

With hyperbola 0.3 :

which dmidecode
/usr/bin/dmidecode

gufw 17.04.1-3

Impossible to start application, error message :

FileNotFoundError: [Errno 2] Aucun fichier ou dossier de ce type: '/usr/sbin/ufw': '/usr/sbin/ufw'

Probably related to this bug:

https://issues.hyperbola.info/index.php?do=details&task_id=1419

[alon@T60-hyperbola ~]$ lp -d HP_OfficeJet_Pro_8710 /home/alon/Desktop/all/testpages/clean_page.pdf
    lp: Unsupported document-format "application/pdf".
    [alon@T60-hyperbola ~]$ lp -d HP_OfficeJet_Pro_8710 /home/alon/Desktop/all/testpages/clean_page.ps
    lp: Unsupported document-format "application/postscript".