Packages

Description:
The package iceweasel-esr do not restore session and forget logins after restart. It ignores the configurations of user.

Additional info:
* package version(s): 1:52.8.0esr.deb1~deb9u1-1

Steps to reproduce:

1. Click the Menu button and choose Preferences.
2. Select the General panel.
3. In the When Firefox starts drop-down menu, select Show my windows and tabs from last time.
4. Close the about:preferences page. Any changes you’ve made will automatically be saved.
5. Quit of session with Ctrl+Q
6. Starts Iceweasel. The session will not be restored. Clicks Menu, choose History and see that restore session is disabled.

Description:
“About Iceweasel-UXP” window contains some minor issues to be fixed:

• “Iceweasel-UXP” instead of “Iceweasel” because we are a different project.
• “Hyperbola Project” instead of “the Hyperbola Project” as link to point to Hyperbola site.
• “for Iceweasel-UXP application” instead of “for Iceweasel rebranding” because we are maintaining an entire application, not just rebranding.

Additional info:
* package version(s): 52.9.0_20180601-3

Steps to reproduce:
Go to Help > About Iceweasel-UXP

I tried using Iceweasel-UXP pre-release, but I’m unable to set any different font, size and encoding, and search any words/characters within page.

Description:

This game cannot start:

admin→ lbreakout2
LBreakout2 2.6.5
Copyright 2001-2011 Michael Speck
Published under GNU GPL — Looking up data in: /usr/share/lbreakout2
Looking up highscores in: /var/games/lbreakout2
Looking up custom levels in: /home/admin/.lgames/lbreakout2-levels
Loading theme ‘AbsoluteB’ Write permission for ‘/var/games/lbreakout2/lbreakout2.hscr’ denied.
Unable to access highscore chart in ‘/var/games/lbreakout2’.
Trying to use config directory ‘/home/admin/.lgames’.
Saving highscore chart in: /home/admin/.lgames
Client finalized
GUI finalized
Audio finalized
STK finalized
SDL finalized

yet nothing is visible (just black screen and mouse)
and permissions are incorrect.

Description:

I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.

Who can help me, not to mount a device during boot?

recaptcha is not working on webchat.freenode.net (and probably other websites) with iceweasel-uxp (was working fine with iceweasel-esr)

https://framapic.org/ZdvYH2JCM39J/HFDSI7z0hXvS.png

Hello,

I can’t manually install some extensions I was using successfully with iceweasel-esr (52.9.x) previously.
Notably :

https-everywhere https://addons.mozilla.org/en-US/firefox/addon/https-everywhere/ watch-with-mpv https://addons.mozilla.org/en-US/firefox/addon/watch-with-mpv/ tampermonkey https://addons.mozilla.org/en-US/firefox/addon/tampermonkey/ Save URL to Wayback Machine https://addons.mozilla.org/en-US/firefox/addon/save-url-to-wayback-machine

How to install them with iceweasel-uxp ?

I opened up (and customised) the menu box, but edit and zoom control button icons are gone missing, except in toolbars.

Also, what about developer button (wrench icon)?

Description:

-Tabs don’t have X on the right to close it.
-Download window has an issue on font.

Note: the font is smaller on Tab description and overal it is nice

Additional info:
* package version(s): iceweasel-uxp 52.9.0_20180601-8

Steps to reproduce:

Description:

Applying any theme from https://addons.mozilla.org/en-US/firefox/themes/ is working but after closing and restarting iceweasel-uxp the theme is lost.

Additional info:
* package version : 52.9.0_20180601-8

Description:

Since the latest update of openrc, I am under the impression that the scripts in /etc/local.d are not executed anymore upon boot or shutdown. rc.log shows nothing though.

Additional info:
* openrc 0.28-18

Steps to reproduce:

Write a dummy script which says hello in /etc/local.d, make it executable and see that it is discarded.

Description:

I ran sensors-detect, it detected two modules :

coretemp
it87

Those have been added to /etc/sysconfig/lm_sensors :

# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
# The format of this file is a shell script that simply defines variables:
# HWMON_MODULES for hardware monitoring driver modules, and optionally
# BUS_MODULES for any required bus driver module (for example for I2C or SPI).

HWMON_MODULES="coretemp it87"

But only coretemp is loaded at boot.

I can manually load it87 module (modprobe it87) and get all sensors working but for some reason it87 module is not loaded at boot.

Hello,

With iceweasel-uxp, some info boxes are not translated, for now I noticed that when the mouse cursor hovers “add tab” element, the info box showing up is still using english (although I’m using French and the rest is ok), this is very, very minor issue I know.. :o)

See picture attached

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:

07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.

After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

/etc/ssl/certs/java/cacerts has 0 entries, resulting in ssl handshake errors in java applications.

Package versions:
* ca-certificates 20170307-1
* ca-certificates-utils 20170307-1

It behaves like a clean installation, does not import the configurations and data from a existing installation of icedove.

The wizard import does not work too. It returns the message:

No application to import data from found.

A workaround

cp --recursive --verbose ~/.icedove/ ~/.mozilla/thunderbird/

Description:

The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted.
I do have dbus, gvfs & ntfs-3g installed and active services.

Additional info:
* package version(s)
PCManFM 1.2.5 - using LibFM ver. 1.2.5

Steps to reproduce:
Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.

Hello,

octopi-notifier is not starting / running on my system, when I try to run it manually in a terminal, here is the output :

Aborting notifier as 'pacmanhelper' DBus service could not be found! [ "/usr/share/dbus-1/system-services/org.octopi.pacmanhelper.service" ]

I don’t know if this is applicable / related but I found this on aur website : https://aur.archlinux.org/packages/octopi/

kikadf :

Default build octopi-notifier without knotifications support. To enable edit PKGBUILD, uncomment #USE_NOTIFIER='1'

PS : I’m using XFCE4 autostart to start octopi-notifier (See screenshot attached)

I can’t switch windows in add-ons such as session manager.

It’s probably the same bug which appears in palemoon (inherited from UXP). See here:

https://issues.hyperbola.info/index.php?do=details&task_id=1160&opened=24&status[0]=

https://forum.palemoon.org/viewtopic.php?f=37&t=19941&sid=3cd95f0870b5cef74c582eb9a3ea778a

After enabling show-flags via dconf-editor in org.mate.peripherals-keyboard-xkb.indicator the flags don’t show up. The simple workaround is to copy flags you want into ~/.icons/flags (after creating the directory) from here

https://github.com/linuxmint/flags/tree/master/usr/share/iso-flag-png

and then to reboot.

It seems to be this bug:

https://askubuntu.com/questions/1059324/how-to-show-current-keyboard-layout-on-mate-panel-as-country-flag/1059325#1059325

ffmpegthumbnailer does not support some media formats since they do not appear in its configuration file ffmpegthumbnailer.thumbnailer which can be found in /usr/share/thumbnailers/. By editing the file ffmpegthumbnailer.thumbnailer one can add thumbnail support for embedded art in audio formats such as flac and mp3 (using the -m flag) and thumbnail support for webp (a new image format which iceweasel-uxp and gthumb support). I’m attaching my edited file (I just added a few common audio formats and webp and added the -m flag and removed the -f flag).

Description:
Something is wrong with the latest version packaged in Hyperbola. zathura-pdf-poppler is unable to process apostrophes displayed in pdf bookmarks.

Steps to reproduce:
Open any pdf file which has a summary included, then hit `Tab` to display the summary. Instead of apostrophes, zathura-pdf-poppler displays html entities while the output of zathura-pdf-mupdf is correct.

Description:

Apache web server shall be running with or without the external network, and without NetworkManager.

rc-service httpd start

will give the message that NetworkManager must be started first, and will not start apache web server. I cannot find in which file is that written.

Steps to reproduce:

1. Disconnect network. Start computer.

2. Try to start apache with above command.

That makes no sense, as Apache can run on local network without NetworkManager and it is not written in the description.

Description:

Nginx web server shall be running with or without the external network, and without NetworkManager.

rc-service nginx start

Additional info:

$ pacman -Si nginx
Repositorio               : extra
Nombre                    : nginx
Versión                   : 1.12.2-2.hyperbola4
Descripción               : Lightweight HTTP server and IMAP/POP3 proxy server, with logger recommendation and OpenRC support
Arquitectura              : x86_64
URL                       : https://nginx.org
Licencias                 : custom
Grupos                    : Nada
Provee                    : Nada
Depende de                : pcre  zlib  openssl  geoip
Dependencias opcionales   : logger: message logging support
En conflicto con          : nginx-mainline
Remplaza a                : nginx-mainline
Tamaño de la descarga     : 478,89 KiB
Tamaño de la instalación  : 1598,00 KiB
Encargado                 : André Silva <emulatorman@hyperbola.info>
Fecha de creación         : lun 11 jun 2018 18:20:12 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

$ pacman -Ql nginx
nginx /etc/
nginx /etc/conf.d/
nginx /etc/conf.d/nginx
nginx /etc/init.d/
nginx /etc/init.d/nginx
nginx /etc/logrotate.d/
nginx /etc/logrotate.d/nginx
nginx /etc/nginx/
nginx /etc/nginx/fastcgi.conf
nginx /etc/nginx/fastcgi_params
nginx /etc/nginx/koi-utf
nginx /etc/nginx/koi-win
nginx /etc/nginx/mime.types
nginx /etc/nginx/nginx.conf
nginx /etc/nginx/scgi_params
nginx /etc/nginx/uwsgi_params
nginx /etc/nginx/win-utf
nginx /usr/
nginx /usr/bin/
nginx /usr/bin/nginx
nginx /usr/share/
nginx /usr/share/licenses/
nginx /usr/share/licenses/nginx/
nginx /usr/share/licenses/nginx/LICENSE
nginx /usr/share/man/
nginx /usr/share/man/man8/
nginx /usr/share/man/man8/nginx.8.gz
nginx /usr/share/nginx/
nginx /usr/share/nginx/html/
nginx /usr/share/nginx/html/50x.html
nginx /usr/share/nginx/html/index.html
nginx /usr/share/vim/
nginx /usr/share/vim/vimfiles/
nginx /usr/share/vim/vimfiles/ftdetect/
nginx /usr/share/vim/vimfiles/ftdetect/nginx.vim
nginx /usr/share/vim/vimfiles/indent/
nginx /usr/share/vim/vimfiles/indent/nginx.vim
nginx /usr/share/vim/vimfiles/syntax/
nginx /usr/share/vim/vimfiles/syntax/nginx.vim
nginx /var/
nginx /var/lib/
nginx /var/lib/nginx/
nginx /var/lib/nginx/proxy/
nginx /var/log/
nginx /var/log/nginx/

Steps to reproduce:

1. Disconnect network. Start computer.

2. Try to start nginx with above command.

Description:

This bug only appears when logged in as root on terminal

# kf5-config --version
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Qt: 5.8.0
KDE Frameworks: 5.33.0
kf5-config: 1.0

Additional info:

* package version(s)

$ pacman -Si kdelibs4support
Repositorio               : extra
Nombre                    : kdelibs4support
Versión                   : 5.33.0-1
Descripción               : Porting aid from KDELibs4
Arquitectura              : x86_64
URL                       : https://community.kde.org/Frameworks
Licencias                 : LGPL
Grupos                    : kf5-aids
Provee                    : Nada
Depende de                : kunitconversion  kitemmodels  kemoticons  kded  kparts
Dependencias opcionales   : Nada
En conflicto con          : kde4support
Remplaza a                : kde4support
Tamaño de la descarga     : 3,03 MiB
Tamaño de la instalación  : 17,36 MiB
Encargado                 : Felix Yan <felixonmars@archlinux.org>
Fecha de creación         : jue 13 abr 2017 14:29:47 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Steps to reproduce:

- Install KDE plasma