Packages

The man page of pacman says:

DESCRIPTION
        Pacman is a package management utility that tracks installed packages on a Linux
        system

And I propose to change “Linux system” to “GNU/Linux system”.

OpenSSH through 7.7 is prone to a user enumeration vulnerability due to not delaying bailout for an invalid authenticating user until after the packet containing the request has been fully parsed, related to auth2-gss.c, auth2-hostbased.c, and auth2-pubkey.c.

https://security-tracker.debian.org/tracker/CVE-2018-15473

Patch: https://salsa.debian.org/ssh-team/openssh/commit/4641c58a3279f6b118f9562babaa0ee050a38619

Technical analysis: https://blog.nviso.be/2018/08/21/openssh-user-enumeration-vulnerability-a-close-look/

Description:

Use procps-ng's "sysctl" by default instead of inetutils's "hostname" for
hostname support.

Since [inetutils] is an extra dependency for openrc, it
contains insecure commands like: ftp/rcp/rlogin/rsh/talk/telnet
For security reasons, procps-ng should be the tool to handle hostname
configuration through hostname init script because is a base package.

Additional info:

openrc 0.28-14

/etc/init.d/hostname

-       hostname "$h"
+       case $(uname -s) in
+               GNU/Linux|Linux)
+                       sysctl -qw kernel.hostname="$h"
+                       ;;
+               *)
+                       hostname "$h"
+                       ;;
+       esac

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-14
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 196.71 KiB
Installed Size  : 1767.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Mon 07 May 2018 03:54:42 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

Set and run hostname init script

Description:

Some init scrips are forced to load in certain runlevels by default (eg. boot) when 
OpenRC is upgraded. It isn't good for virtualization environments like chroot that
doesn't require it to work.

Those scripts are:
* /etc/init.d/dmesg
* /etc/init.d/hwclock
* /etc/init.d/keymaps
* /etc/init.d/killprocs
* /etc/init.d/local
* /etc/init.d/loopback
* /etc/init.d/modules
* /etc/init.d/mount-ro
* /etc/init.d/swap
* /etc/init.d/sysctl

Note: "/etc/init.d/dmesg" should be loaded in "boot" runlevel instead of "sysinit" one at the first installation time.

Note: "/etc/init.d/local" should be loaded in "sysinit" runlevel instead of "default" and "nonetwork" one at the first installation time.

Additional info:

openrc 0.28-14

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-14
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 196.71 KiB
Installed Size  : 1767.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Mon 07 May 2018 03:54:42 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

Re-install and/or upgrade the OpenRC package.

Description:

Some init scrips are forced to load in certain runlevels by default (eg. boot) when 
OpenRC is upgraded. Also some of them are autoloaded by other init scripts.
It isn't good for virtualization environments like chroot that doesn't require it to
work.

These files need be removed:
* /etc/runlevels/boot/binfmt (optional)
* /etc/runlevels/boot/fsck (autoloaded from "root" init script)
* /etc/runlevels/boot/localmount (autoloaded from "bootmisc" init script)
* /etc/runlevels/boot/procfs (optional, mount "binfmt_misc" only)
* /etc/runlevels/boot/termencoding (autoloaded from "keymaps" init script)
* /etc/runlevels/default/netmount (optional)
* /etc/runlevels/shutdown/savecache (optional)
* /etc/runlevels/sysinit/devfs (autoload from "udev" init script)
* /etc/runlevels/sysinit/sysfs (autoload from "udev" init script)

Additional info:

openrc 0.28-14

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-14
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 196.71 KiB
Installed Size  : 1767.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Mon 07 May 2018 03:54:42 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

Re-install and/or upgrade the OpenRC package

Description:

Set "devfs" init script to run before than any "logger" init script.

It fixes when any "logger" server is running with rc_logger activated
without the needed to add a "logger" init script on different runlevels.

Additional info:

openrc 0.28-14

/etc/init.d/devfs

-       before dev
+       before dev logger

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-14
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 196.71 KiB
Installed Size  : 1767.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Mon 07 May 2018 03:54:42 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

Add "devfs" and any "logger" init script to default runlevel

Description:

• “sysctl” initscript doesn’t set sysctl parameters on network interfaces.
• “sysctl” initscript needs run “sysctl” initscript after “net” initscript.

Additional info:

• openrc 0.28-18

/etc/init.d/sysctl

-        after clock
+        after clock net

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-18
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 193.18 KiB
Installed Size  : 1720.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Sun 08 Jul 2018 01:28:16 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

• Boot “openrc”

Description:

Rename "procfs" init script to "binfmt_misc", it isn't a "procfs"

/etc/init.d/procfs → /etc/init.d/binfmt_misc

-description="Mounts misc filesystems in /proc."
+description="Mounts binfmt_misc filesystems in /proc."

/etc/init.d/binfmt

-        after clock procfs
+        after clock binfmt_misc

Additional info:

openrc 0.28-14

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-14
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 196.71 KiB
Installed Size  : 1767.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Mon 07 May 2018 03:54:42 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

none

Description:

Rename "chroot-nspawn" keyword to "chroot+unshare" one
because"chroot+unshare" subsystem (chroot and unshare command)
is more precise than "chroot-nspawn" (systemd-nspawn
compatibility script) subsystem.

The files with "chroot-nspawn" keyword are:
* /etc/init.d/binfmt
* /etc/init.d/bootmisc (as SYSTEMD-NSPAWN)
* /etc/init.d/consolefont
* /etc/init.d/devfs
* /etc/init.d/dmesg
* /etc/init.d/fsck
* /etc/init.d/hostname
* /etc/init.d/hwclock
* /etc/init.d/keymaps
* /etc/init.d/localmount
* /etc/init.d/loopback
* /etc/init.d/mtab
* /etc/init.d/modules
* /etc/init.d/modules-load
* /etc/init.d/mount-ro
* /etc/init.d/net-online
* /etc/init.d/netmount
* /etc/init.d/numlock
* /etc/init.d/procfs
* /etc/init.d/root
* /etc/init.d/swap
* /etc/init.d/swclock
* /etc/init.d/sysctl
* /etc/init.d/sysfs
* /etc/init.d/termencoding
* /etc/init.d/urandom

Note:
  chroot: run a command with special root directory
  unshare: isolate the command in a different "Linux namespace"

Additional info:

openrc 0.28-14

/etc/rc.conf

 # ""               - nothing special
 # "docker"         - Docker container manager (GNU/Linux)
 # "jail"           - Jail (DragonflyBSD or FreeBSD)
 # "lxc"            - Linux Containers
 # "openvz"         - Linux OpenVZ
 # "prefix"         - Prefix
 # "rkt"            - CoreOS container management system (GNU/Linux)
 # "subhurd"        - Hurd subhurds (to be checked)
-# "chroot-nspawn"  - Container created by chroot-nspawn
+# "chroot"         - Chroot container (to be checked)
+# "chroot+unshare" - Chroot container using unshare command (GNU/Linux)
 # "uml"            - Usermode Linux
 # "vserver"        - Linux vserver
-# "xen0"           - Xen0 Domain (GNU/Linux and NetBSD)
-# "xenU"           - XenU Domain (GNU/Linux and NetBSD)
+# "xen0"           - Xen0 Domain (GNU/HyperBK, GNU/Linux, FreeBSD and NetBSD)
+# "xenU"           - XenU Domain (GNU/Hurd, GNU/HyperBK, GNU/Linux, FreeBSD, NetBSD and OpenBSD)

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-14
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 196.71 KiB
Installed Size  : 1767.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Mon 07 May 2018 03:54:42 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

Run OpenRC init

Description:

• Remove dangerous “local” init script, is a bad idea to use it, see:

“https://wiki.gentoo.org/wiki//etc/local.d”

Additional info:

• openrc 0.28-17

• remove:
  • “/etc/init.d/local”
  • “/etc/local.d/README”
  • “/etc/local.d/”

/etc/init.d/agetty
----
-        after local
+        after *

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-17
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 194.10 KiB
Installed Size  : 1727.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Thu 05 Jul 2018 01:37:37 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

• On boot.

Description:

Please remove "mtab", "modules-load" and "swclock" init scripts.

"mtab" is a deprecated and unmaintained init script,
because filesystem contains a mtab soft link.

"modules-load" init script, is a systemd compatibility configuration
to load the kernel modules from the "/etc/modules-load" configuration
directory.
This init script is useless, because the "modules" init script exists
and it's a duplicated feature.
If you need a module to load a module, just configure "/etc/conf.d/modules"
and start the "modules" init script or add a module in
the "/etc/mkinitcpio.conf" and run mkinitcpio -p $yourkernel

"swclock" is an useless init script, because is a service
setting the local clock based on last shutdown time.
If a machine doesn't support "/etc/rtc", then disable "clock_hctosys" and
"clock_systohc" from "/etc/conf.d/hwclock" with or without
NTP server/client. For chroot environments,"osclock" init script is the way.

Additional info:

openrc 0.28-14

/etc/init.d/localmount

-use lvm modules mtab root
+use lvm modules root

/etc/init.d/modules

-    want modules-load

/etc/init.d/lm_sensors

-after modules-load

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-14
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 196.71 KiB
Installed Size  : 1767.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Mon 07 May 2018 03:54:42 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

Enable the unused init scripts

Description:

• OpenRC needs a minor fix (remount proc)

Additional info:

• openrc 0.28-19

openrc /usr/lib/rc/sh/init.sh

—

-        mount -n -t proc -o noexec,nosuid,nodev,gid=proc,hidepid=2 proc /proc
+        mount -n -t proc -o noexec,nosuid,nodev proc /proc
+        mount -n /proc -o remount,gid=26,hidepid=2

Steps to reproduce:

• Boot OpenRC in chroot with unshare

Description:

• Change the “/proc” filesystem option, reverting FS#1038 .

Additional info:

• openrc 0.28-17

/usr/lib/rc/sh/init.sh
----
-                mount -n -t proc -o noexec,nosuid,nodev,hidepid=2,gid=proc proc /proc
+                mount -n -t proc -o noexec,nosuid,nodev,gid=26,hidepid=2 proc /proc

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-17
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 194.10 KiB
Installed Size  : 1727.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Thu 05 Jul 2018 01:37:37 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

• none.

Description:

• “chroot” initscript contains some errors on “chroot” initscript.

Additional info:

• openrc 0.28-18

/etc/conf.d/chroot

 # initial command
 CR_COMD=/sbin/openrc-init
-# network interfaces
-CR_NINF="veth_guest ethernet"
-# wifi interfaces
-CR_WINF="wifi"
-# service dependecies
-CR_DEPS="net_veth.interface_host
-         chroot.name net.interface_ethernet net.interface_wifi"
+# network interfaces, example: CR_NINF="veh0 eth0"
+CR_NINF=""
+# wifi interfaces, example: CR_WINF="wlan0"
+CR_WINF=""
+# service dependecies, example: CR_DEPS="net.veh0 chroot.dns chroot.ntp net.eth0 net.wlan0"
+CR_DEPS=""
 # wait in seconds to run CR_COMD
 CR_CDWT=1
-# wait in seconds to start the sercice
+# wait in seconds to start the service
 CR_STWT=7
 # wait in seconds to stop the service
 CR_SPWT=7

/etc/init.d/chroot

 depend() {
-        need $CR_NDEP
+        need $CR_DEPS
         after modules bootmisc localmount net netmount
         keyword -jail -prefix -vserver
         provide oslv
 }

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-18
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 193.18 KiB
Installed Size  : 1720.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Sun 08 Jul 2018 01:28:16 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

• On boot “openrc” and/or start “chroot” initscripts.

Description:

• Add hidepid in /proc filesystem, needed for chroot with namespaces.
• Revert FS#1082, but as “gid=proc,hidepid=2”, not “hidepid=2,gid=proc”.

Additional info:

• openrc 0.28-18

/usr/lib/rc/sh/init.sh

-                mount -n -t proc -o noexec,nosuid,nodev proc /proc
+                mount -n -t proc -o noexec,nosuid,nodev,gid=proc,hidepid=2 proc /proc

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-18
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 193.18 KiB
Installed Size  : 1720.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Sun 08 Jul 2018 01:28:16 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

• On boot “openrc” on ‘chroot’ with ‘linux namespaces’ (unshare).
• On boot “openrc” on any ‘kernel based virtual machines’ (without /proc premounted).
• On boot the kernel without any image (initramfs-linux-libre-lts*.img).

Description:

Add chroot init script

Note: chroot1 and chroot2 are examples.

Additional info:

openrc 0.28-14

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-14
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 196.71 KiB
Installed Size  : 1767.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Mon 07 May 2018 03:54:42 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

none

Description:

Add "newinstance" mount parameter in "devpts" (in "devfs" init script)

Additional info:

openrc 0.28-14

/etc/init.d/devfs

- “devpts /dev/pts 0755 ,gid=5,mode=0620 devpts” \
+ “devpts /dev/pts 0755 ,gid=5,mode=0620,newinstance devpts” \

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-14
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 196.71 KiB
Installed Size  : 1767.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Mon 07 May 2018 03:54:42 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:
Run “devfs” init script

/etc/init.d/net-online
-----
Line #62
ping_test_host="${ping_test_host:-google.com}"
_____
/etc/conf.d/net-online
-----
# The default is google.com.

Since the update of openrc to 0.28-11 this morning something fails during boot process as I get the following error message:

Cowardly refusing to concatenate a logfile into itself.
Please change rc_log_path to something other than /var/log/rc.log get rid of this message

But why would I do that?

Besides, once the boot process is finished, I am unable to switch between TTY consoles as I used to using Ctrl-Alt + F1-Fx. I don’t get the login prompt anymore.

Description:
Changelog

2.4.46 is fixing a huge quantity of issues (TLS related & memory leak)

Additional info:
* package version(s) : 2.4.44

Description:

• needs OpenRC init script

Additional info:

• onioncat 0.2.2.r578-1

Steps to reproduce:

• none

Description:

Hi dear developers of Hyperbola. I work in the field of web development. I use a lot of javascript and nodejs to compile.
Could they do the nodejs update?. I also mention this because Hyperbola works with LTS packages.

Additional info:

* package version(s)

$ sudo pacman -Si nodejs
Repositorio               : community
Nombre                    : nodejs
Versión                   : 7.10.0-1
Descripción               : Evented I/O for V8 javascript
Arquitectura              : x86_64
URL                       : http://nodejs.org/
Licencias                 : MIT
Grupos                    : Nada
Provee                    : Nada
Depende de                : openssl-1.0  zlib  icu  libuv  http-parser  c-ares
Dependencias opcionales   : npm: nodejs package manager
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 4,55 MiB
Tamaño de la instalación  : 18,49 MiB
Encargado                 : Felix Yan <felixonmars@archlinux.org>
Fecha de creación         : mié 03 may 2017 09:50:26 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

$ sudo pacman -Si npm
Repositorio               : community
Nombre                    : npm
Versión                   : 4.5.0-1
Descripción               : A package manager for javascript
Arquitectura              : any
URL                       : https://www.npmjs.com/
Licencias                 : custom:Artistic
Grupos                    : Nada
Provee                    : nodejs-node-gyp
Depende de                : nodejs  semver
Dependencias opcionales   : python2: for node-gyp
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 2,72 MiB
Tamaño de la instalación  : 13,98 MiB
Encargado                 : Felix Yan <felixonmars@archlinux.org>
Fecha de creación         : mié 12 abr 2017 22:08:06 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

- NodeJS LTS (includes npm 5.6.0):

* https://nodejs.org/dist/v8.11.3/node-v8.11.3.tar.gz

* https://nodejs.org/dist/v8.11.3/SHASUMS256.txt.asc

Some errors that I suffer when compiling:
- https://stackoverflow.com/questions/46476741/nodejs-util-promisify-is-not-a-function

A malicious DHCP server, or an attacker on the local network able to spoof DHCP responses, could use this flaw to execute arbitrary commands with root privileges on systems using NetworkManager which is configured to obtain network configuration using the DHCP protocol.

Description:

[netifrc] update package to 0.6.0 backport version

Fix security errors:

Fix errors:

Changes:

Features:

Note: Please add a extra hotfix patch from git:

netifrc 0.5.1-3

$ pacman -Si netifrc
Repository      : core
Name            : netifrc
Version         : 0.5.1-3
Description     : Network interface management scripts
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Netifrc
Licenses        : BSD2
Groups          : base
Provides        : None
Depends On      : eudev
Optional Deps   : iproute2: for interface handler, VPN, bridging and tunneling support (recommended)
                  net-tools: for interface handler support
                  bridge-utils: for bridging support
                  linux-atm: for CLIP and RFC 2684 bridge support
                  wpa_supplicant: for wireless networking support (recommended)
                  wireless_tools: for wireless networking support
                  dhcpcd: for DHCP support (recommended)
                  dhclient: for DHCP support
                  busybox: for DHCP support
                  iputils: for APIPA support
                  ifenslave: for bonding interfaces
                  ppp: for PPP and ADSL support (recommended)
                  rp-pppoe: for ADSL support
                  macchanger: for changing MAC addresses
                  ifplugd: for cable in/out detection
Conflicts With  : None
Replaces        : None
Download Size   : 62.75 KiB
Installed Size  : 349.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Wed 24 Jan 2018 09:05:24 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

contains errors in 0.5.1 version

Description:

• “net_veth” and “net_macsec” initscripts contains some issues.

Additional info:

• netifrc 0.6.0-2.backports1

/etc/conf.d/net_veth

-# Source Interface (host)
-IFSRC=interface_host
+# Source Interface (host), example: IFSRC=veh0
+IFSRC=veh0
 # Set custom parameters on Source Interface
 IFCTS=
-# Destination Interface (guest)
-IFDST=interface_guest
+# Destination Interface (guest), example: IFDST=veg0
+IFDST=veg0
 # Set custom parameters on Destination Interface
 IFCTD=

/etc/conf.d/net_macsec

-# Source Interface (host)
-IFSRC=interface_host
-# Network init service dependency from Source Interface
-#IFDEP=net.interface_host
-# Destination Interface (macsec/guest)
-IFDST=interface_macsec
+# Source Interface (host), example: IFSRC=eth0
+IFSRC=eth0
+# Network init service dependency from Source Interface, example: IFDEP=net.eth0
+IFDEP=
+# Destination Interface (macsec/guest), example: IFDST=macsec0
+IFDST=macsec0
 # Set custom parameters on MACsec Interface
 IFCTD=

---

 IFPAR="cipher gcm-aes-128
        icvlen 16
        encrypt on
        protect off
        replay off
        send_sci on
-       validate strict"
+       validate disabled"

---

-# Add receive channels and/or receive association keys (RXSC), examples:
-#
-# [sci_<0..ffffffffffffffff(hex)>|port_<1..65535(dec)>_address_<00:00:00:00:00:00..ff:ff:ff:ff:ff:ff(hex)>][_<on/off>]
-#
-# sci_0
-# sci_ffffffffffffffff_on
-# port_1_address_00:00:00:00:00:00
-# port_2_address_ff:ff:ff:ff:ff:ff_off
-#
-# [sci_<0..ffffffffffffffff(hex)>_|port_<1..65535(dec)>_address_<00:00:00:00:00:00..ff:ff:ff:ff:ff:ff(hex)>_]sa_<0..3(dec)>_[pn_<1..4294967295(dec)>_][<on/off>_]key_<00..ff(hex)>_<00000000000000000000000000000000..ffffffffffffffffffffffffffffffff(hex)>
-#
-# sa_0_key_00_00000000000000000000000000000000
-# sa_1_key_pn_1_01_f00f00f00f00f00f00f00f00f00f00f0
-# sa_2_key_on_32_de_de00de00de00de00de00de00de00de00
-# sa_3_key_pn_16345_off_a1_fca1fca1fca1fca1fca1fca1fca1fca1
-# sci_0_sa_0_key_00_00000000000000000000000000000000
-# sci_32_sa_1_key_pn_1_01_f00f00f00f00f00f00f00f00f00f00f0
-# sci_451_sa_2_key_on_32_de_de00de00de00de00de00de00de00de00
-# sci_7438f_sa_3_key_pn_16345_off_a1_fca1fca1fca1fca1fca1fca1fca1fca1
-# port_1_address_00:00:00:00:00:00_sa_0_key_00_00000000000000000000000000000000
-# port_2_address_ff:ff:ff:ff:ff:ff_sa_1_key_pn_1_01_f00f00f00f00f00f00f00f00f00f00f0
-# port_3_address_00:00:00:ff:ff:ff_sa_2_key_on_32_de_de00de00de00de00de00de00de00de00
-# port_4_address_ff:ff:ff:00:00:00_sa_3_key_pn_16345_off_a1_fca1fca1fca1fca1fca1fca1fca1fca1
+# Add receive channels and/or receive association keys (RXSC), examples:
+#
+# "[sci <0..ffffffffffffffff(hex)>|port <1..65535(dec)> address <00:00:00:00:00:00..ff:ff:ff:ff:ff:ff(hex)>][ <on/off>]"
+#
+# "sci 0"
+# "sci ffffffffffffffff on"
+# "port 1 address 00:00:00:00:00:00"
+# "port 2 address ff:ff:ff:ff:ff:ff off"
+#
+# "[sci <0..ffffffffffffffff(hex)> |port <1..65535(dec)> address <00:00:00:00:00:00..ff:ff:ff:ff:ff:ff(hex)> ]sa <0..3(dec)> [pn <1..4294967295(dec)> ][<on/off> ]key <00..ff(hex)> <00000000000000000000000000000000..ffffffffffffffffffffffffffffffff(hex)>"
+#
+# "sci 0 sa 0 key 00 00000000000000000000000000000000"
+# "sci 32 sa 1 pn 1 key 01 f00f00f00f00f00f00f00f00f00f00f0"
+# "sci 451 sa 2 on key de de00de00de00de00de00de00de00de00"
+# "sci 7438f sa 3 pn 16345 off key a1 fca1fca1fca1fca1fca1fca1fca1fca1"
+# "port 1 address 00:00:00:00:00:00 sa 0 key 00 00000000000000000000000000000000"
+# "port 2 address ff:ff:ff:ff:ff:ff sa 1 pn 1 key 01 f00f00f00f00f00f00f00f00f00f00f0"
+# "port 3 address 00:00:00:ff:ff:ff sa 2 on key de de00de00de00de00de00de00de00de00"
+# "port 4 address ff:ff:ff:00:00:00 sa 3 pn 16345 off key a1 fca1fca1fca1fca1fca1fca1fca1fca1"
+#
+# IFRSC=("port 1 address 00:00:00:00:00:00 on"
+#        "port 1 address 00:00:00:00:00:00 sa 0 pn 1 on key 00 00000000000000000000000000000000"
+#        "sci ffffffffffff0001 on"
+#        "sci ffffffffffff0001 sa 0 pn 1 on key 00 ffffffffffffffffffffffffffffffff")
 IFRSC=()

-# Add trasmition association keys (TXSC) , examples:
-# sa_<0..3(dec)>_[pn_<1..4294967295(dec)>_][<on/off>_]key_<00..ff(hex)>_<00000000000000000000000000000000..ffffffffffffffffffffffffffffffff(hex)>
-#
-# sa_0_key_00_00000000000000000000000000000000
-# sa_1_key_pn_1_01_f00f00f00f00f00f00f00f00f00f00f0
-# sa_2_key_on_32_de_de00de00de00de00de00de00de00de00
-# sa_3_key_pn_16345_off_a1_fca1fca1fca1fca1fca1fca1fca1fca1
+# Add trasmition association keys (TXSC) , examples:
+# "sa <0..3(dec)> [pn <1..4294967295(dec)> ][<on/off> ]key <00..ff(hex)> <00000000000000000000000000000000..ffffffffffffffffffffffffffffffff(hex)>"
+#
+# "sa 0 key 00 00000000000000000000000000000000"
+# "sa 1 pn 1 key 01 f00f00f00f00f00f00f00f00f00f00f0"
+# "sa 2 on key de de00de00de00de00de00de00de00de00"
+# "sa 3 pn 16345 off key a1 fca1fca1fca1fca1fca1fca1fca1fca1"
+#
+# IFTSC=("sa 0 pn 1 on key 00 00000000000000000000000000000000")
 IFTSC=()

/etc/init.d/net_macsec

                         if [[ $IFRSC ]]; then
-                                for mac_rxsc in ${IFRSC[@]}; do
-                                        ip macsec add $IFDST rx ${mac_rxsc/_/ }
+                                for mac_rxsc in "${IFRSC[@]}"; do
+                                        ip macsec add $IFDST rx $mac_rxsc
                                 done
                         fi
                         if [[ $IFTSC ]]; then
-                                for mac_txsc in ${IFTSC[@]}; do
-                                        ip macsec add $IFDST tx ${mac_txsc/_/ }
+                                for mac_txsc in "${IFTSC[@]}"; do
+                                        ip macsec add $IFDST tx $mac_txsc
                                 done
                         fi

$ pacman -Si netifrc
Repository      : core
Name            : netifrc
Version         : 0.6.0-2.backports1
Description     : Network interface management scripts
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Netifrc
Licenses        : BSD2
Groups          : base
Provides        : None
Depends On      : eudev
Optional Deps   : iproute2: for interface handler, VPN, bridging and tunneling support (recommended)
                  net-tools: for interface handler support
                  bridge-utils: for bridging support
                  linux-atm: for CLIP and RFC 2684 bridge support
                  wpa_supplicant: for wireless networking support (recommended)
                  wireless_tools: for wireless networking support
                  dhcpcd: for DHCP support (recommended)
                  dhclient: for DHCP support
                  busybox: for DHCP support
                  iputils: for APIPA support
                  ifenslave: for bonding interfaces
                  ppp: for PPP and ADSL support (recommended)
                  rp-pppoe: for ADSL support
                  macchanger: for changing MAC addresses
                  ifplugd: for cable in/out detection
Conflicts With  : None
Replaces        : None
Download Size   : 66.18 KiB
Installed Size  : 373.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Tue 03 Jul 2018 12:16:13 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

• Boot “openrc” and/or start “net_{veth,macsec}” initscripts.