|
Testing | Bug Report | Very Low | High | [xenocara-xkbcomp] Could not resolve keysym XF86FullScr ... | Closed | |
Task Description
While the X session is still running, did anyone happen key bindings being unresponsive? A few lines of errors appeared from xkbcomp because of a missing keyboard symbol on the single TTY. It reads:
The XKEYBOARD keymap compiler (xkbcomp) reports:
> error: Could not resolve keysym XF86FullScreen
Errors from xkbcomp are not fatal to the X server
See also related issues affected on other existing distros, were eventually resolved:
|
|
Testing | Bug Report | Very Low | Very Low | [Hyperbola GNU/Linux-libre 0.4] [wine-stable] doesn't r ... | Closed | |
Task Description
The title says that above if without having required library dependencies for most of them under 32-bit.
|
|
Testing | Bug Report | Very Low | High | [Hyperbola GNU/Linux-libre 0.4] Video driver issues wit ... | Closed | |
Task Description
After setting up and testing our 32-bit QEMU instance, we often tried to initialize the X11, but it refused to do because of video driver issues.
As well as changing to other video drivers on our instance is still the exact issue.
Here is a log from X11 below we attached.
|
|
Testing | Bug Report | Very Low | Medium | [adwaita-icon-theme] Most symbolic icons look brokenly ... | Closed | |
Task Description
As the title says, some affected symbolic icons look like on a screencap of the GTK3 Widget Factory we attached below.
|
|
Testing | Bug Report | Very Low | Medium | [Hyperbola GNU/Linux-libre 0.4] [numptyphysics] has cra ... | Closed | |
Task Description
This issue affects the game crashed, causing the segmentation fault; it never works and is unplayable.
A few lines of errors appeared here from Numpty Physics. It reads:
[ 0ms] [Os.cpp:278 INFO] Got locale: "en_GB.UTF-8", using "en"
[ 0ms] [Os.cpp:283 INFO] No translation file for en, send a pull request
Segmentation fault
|
|
Testing | Bug Report | Very Low | Medium | [icu] needs to rebuild that should place genccode into ... | Closed | |
Task Description
Here is the problem with ICU where LibreOffice has refused to build without genccode, yet an output log results like this.
makepkg -CLfs:
-- snip --
checking for genccode... no
configure: error: 'genccode' not found in $PATH, install the icu development tool 'genccode'
Error running configure at ./autogen.sh line 299.
-- snip --
pacman -Ql icu:
-- snip --
icu /usr/sbin/
icu /usr/sbin/escapesrc
icu /usr/sbin/genccode
icu /usr/sbin/gencmn
icu /usr/sbin/gennorm2
-- snip --
|
|
Testing | Bug Report | Very Low | Medium | angband game Couldn't load the requested font. | Closed | |
Task Description
Description: When run angband game, the emulator of terminal show me the next, at hyperbola v0.4 testing
[ user | 2021-10-23 | 06:05 ] [/home/user] [0] $ angband angband: Couldn’t load the requested font. (10×20)
Additional info: * package version(s) * config and/or log files etc.
Steps to reproduce: - Install the package - Run in terminal
|
|
Testing | Bug Report | Very Low | Medium | widelands game shared library error | Closed | |
Task Description
Description: after install widelands and run the game output the next
[ user | 2021-11-05 | 07:13 ] [/home/user] [0] $ widelands widelands: error while loading shared libraries: libminizip.so.1: cannot open shared object file: No such file or directory
Additional info: * package version(s) : extra/widelands 21-2 * config and/or log files etc.
Steps to reproduce:
|
|
Any | Bug Report | Very Low | Medium | wesnoth change language no works | Closed | |
Task Description
Description: after install the package, select language, choose other language and the language no change
Additional info: * package version(s) : Battle for Wesnoth v1.14.15 * config and/or log files etc. ↓
[ user | 2021-11-05 | 07:31 ] [/home/user] [0] $ wesnoth Battle for Wesnoth v1.14.15 Started on Fri Nov 5 07:32:01 2021
Data directory: /usr/share/games/wesnoth User configuration directory: /home/USER/.config/wesnoth User data directory: /home/USER/.local/share/wesnoth/1.14 Cache directory: /home/USER/.cache/wesnoth
Setting mode to 1366×768 Checking lua scripts... ok 20211105 07:32:12 warning general: setlocale() failed for ‘it_IT’. 20211105 07:32:12 warning general: setlocale() failed for ‘it_IT’.
Steps to reproduce: Install, run, select new language, and find, the language no change
Attach image log
|
|
Testing | Bug Report | Very Low | Medium | warzone2100 fail | Closed | |
Task Description
Description: the program game crash-down when select a tank
Additional info: * package version(s) : extra/warzone2100 3.3.0-3 * config and/or log files etc. ↓ and attach the log file
[ user | 2021-11-05 | 07:41 ] [/home/user] [0] $ warzone2100 which: no gdb in (/usr/bin:/usr/java/jre1.8.0/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/user/.hyperterm/personal/commands:/opt/chrome) Saved dump file to ‘/home/user/.local/share/warzone2100-3.3.0//logs/warzone2100.gdmp-bspbru’ If you create a bugreport regarding this crash, please include this file. Segmentation fault
Steps to reproduce: after install, start a new campaing, select a tank, and the program crash
|
|
Testing | Bug Report | Very Low | High | espeak no works | Closed | |
Task Description
Description: when run `espeak hi` only sound a crack and output the next message
[ user | 2021-12-13 | 12:47 ] [/home/user] [0] $ espeak hi ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2660:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib pcm_route.c:877:(find_matching_chmap) Found no matching channel map ALSA lib pcm_sndio.c:383:(sndio_open) sndio: only playback streams are supported connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=No such file or directory) attempt to connect to server failed Expression ‘framesAvail’ failed in ‘src/hostapi/alsa/pa_linux_alsa.c’, line: 3625 Expression ‘PaAlsaStreamComponent_GetAvailableFrames( self, &framesAvail, xrun )’ failed in ‘src/hostapi/alsa/pa_linux_alsa.c’, line: 3985 Expression ‘PaAlsaStreamComponent_RegisterChannels( &self→playback, &self→bufferProcessor, &playbackFrames, &xrun )’ failed in ‘src/hostapi/alsa/pa_linux_alsa.c’, line: 4115 Expression ‘PaAlsaStream_SetUpBuffers( stream, &framesGot, &xrun )’ failed in ‘src/hostapi/alsa/pa_linux_alsa.c’, line: 4355
Additional info: * package version(s) * config and/or log files etc.
Steps to reproduce: `doas pacman -S espeak` `espeak hi`
|
|
Stable | Bug Report | Very Low | Medium | [yeahwm] has crashed that refused to initialize. | Closed | |
Task Description
The title says it above.
Using both methods to launch YeahWM with SLiM and xinit doesn’t work as it keeps crashing over the segmentation fault.
|
|
Stable | Bug Report | Very Low | Medium | hypervideo have a bug now | Closed | |
Task Description
$ hypervideo -F https://yewtu.be/watch?v=W5fFOECr3EI [youtube] W5fFOECr3EI: Downloading webpage [youtube] W5fFOECr3EI: Downloading android player API JSON [youtube] W5fFOECr3EI: Downloading player 11e3a4ec WARNING: [youtube] nsig extraction failed: You may experience throttling for some formats n = iXmUjcWoU-JB5WlM ; player = https://www.youtube.com/s/player/11e3a4ec/player_ias.vflset/en_US/base.js W5fFOECr3EI: Traceback (most recent call last):
File "/usr/lib/python3.8/site-packages/hypervideo_dl/extractor/youtube.py", line 2519, in _decrypt_nsig
self._player_cache[sig_id] = func(s)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/extractor/youtube.py", line 2551, in <lambda>
return lambda s: jsi.extract_function_from_code(*func_code)([s])
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 536, in resf
ret, should_abort = self.interpret_statement(stmt, var_stack)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 145, in interpret_statement
v = self.interpret_expression(expr, local_vars, allow_recursion)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 182, in interpret_expression
ret, should_abort = self.interpret_statement(try_expr, local_vars, allow_recursion - 1)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 145, in interpret_statement
v = self.interpret_expression(expr, local_vars, allow_recursion)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 182, in interpret_expression
ret, should_abort = self.interpret_statement(try_expr, local_vars, allow_recursion - 1)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 145, in interpret_statement
v = self.interpret_expression(expr, local_vars, allow_recursion)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 256, in interpret_expression
self.interpret_expression(sub_expr, local_vars, allow_recursion)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 326, in interpret_expression
left_val, should_abort = self.interpret_statement(
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 145, in interpret_statement
v = self.interpret_expression(expr, local_vars, allow_recursion)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 326, in interpret_expression
left_val, should_abort = self.interpret_statement(
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 145, in interpret_statement
v = self.interpret_expression(expr, local_vars, allow_recursion)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 464, in interpret_expression
raise ExtractorError('Unsupported JS expression %r' % expr)
hypervideo_dl.utils.ExtractorError: Unsupported JS expression ‘0⇐c[49]’; please report this issue on https://issues.hyperbola.info/ , filling out the appropriate issue template. Confirm you are on the latest version using pacman -Su (caused by ExtractorError(”Unsupported JS expression ‘0⇐c[49]’; please report this issue on https://issues.hyperbola.info/ , filling out the appropriate issue template. Confirm you are on the latest version using pacman -Su”)); please report this issue on https://issues.hyperbola.info/ , filling out the appropriate issue template. Confirm you are on the latest version using pacman -Su ERROR: [youtube] W5fFOECr3EI: Unable to extract uploader id; please report this issue on https://issues.hyperbola.info/ , filling out the appropriate issue template. Confirm you are on the latest version using pacman -Su
|
|
Any | Backport Request | Very Low | Medium | [iceweasel-uxp] Privacy Possum continuous support for I ... | Closed | |
Task Description
This is another addon I would like support indefinitely for Iceweasel-UXP:
It blocks etag tracking and other nasty forms of tracking.
But again, you would need to make the changes based on the newer versions only for legacy and without WebExt required of course.
|
|
Stable | Backport Request | Very Low | Medium | Zoom Page WE Backport Request | Closed | |
Task Description
Description: Zoom web pages either per-site or per-tab, with optional fit-to-width and minimum text size, using the toolbar button, context menu, keyboard shortcuts or mouse wheel.
Additional info: This extension can be used as a workaround to old Firefox bug: Set a Default Text Size (or Page Zoom Level) in Tools > Options > Content > Default Page Size - External Link
Steps to reproduce: N/A
|
|
Any | Backport Request | Very Low | Medium | [iceowl] package request | Closed | |
Task Description
Or if you know a more libre calendar addon that is easy to use/reliable, feel free!
This is my only other package needed besides ublock origin/enigmail. :)
|
|
Any | Backport Request | Very Low | Medium | [icedove-uxp] backport mail merge | Closed | |
Task Description
What I miss very much is “mail merge”. For example, I had to send 102 personalized emails to my students, as the term is beginning. The only way to do that was to revert to the previous non-uxp icedove.
But but immediately after that, I reinstalled icedove-uxp, of course!
|
|
Any | Backport Request | Very Low | Medium | [icedove-uxp] backport cardbook | Closed | |
Task Description
Another very useful addon is cardbook (or any equivalent) as it allows to work with remote calendars and contacts.
Actually, I don’t like to work with remote calendars or contacts. But some of my colleagues do. The only condition I set is to work with trustworthy providers using free software exclusively. But they do exist.
|
|
Stable | Backport Request | Very Low | Medium | Request for addon used by Iceweasel-UXP: uMatrix | Closed | |
Task Description
Hello, would it be possible to have the addon uMatrix ported to be used within the UXP-platform? The addon is complete open and can be found here https://github.com/gorhill/uMatrix
I’ve tried to install different versions and it seems to be incompatible with the concurrent version of Iceweasel-UXP from the repositoy.
|
|
Any | Backport Request | Very Low | Medium | Random Agent Spoofer for Iceape | Closed | |
Task Description
random_agent_spoofer-0.9.5.8.4-fx.xpi is the version I desire, can you implement it?
|
|
Any | Backport Request | Very Low | Medium | Greasemonkey For Iceape | Closed | |
Task Description
greasemonkey-3.31.4 version desired. I would love to see it implemented for Iceape
|
|
Any | Backport Request | Very Low | Low | Self Destructing Cookies for Iceape | Closed | |
Task Description
I would like this to be available for Iceape as well V4.13
|
|
Any | Backport Request | Very Low | Medium | No Resource Url Leak for Iceape | Closed | |
Task Description
1.2.4 version would be nice for Iceape.
|
|
Any | Backport Request | Very Low | Low | Ublock Origin for Iceape | Closed | |
Task Description
The version I desire is this: 1.16.4.6
|
|
Any | Backport Request | Very Low | Very Low | Icetray for Iceape-uxp | Closed | |
Task Description
This already works for it, but I just thought I would request it to be put in.
|
|
Any | Backport Request | Very Low | Low | elogind package | Closed | |
|
|
Stable | Update Request | Low | High | [pigeonhole] needs to be updated (depends on older vers ... | Closed | |
|
|
Any | Replace Request | Low | Low | [appmenu-qt4] replace with appmenu-qt (qt5) | Closed | |
|
|
Any | Replace Request | Low | Low | [botan*] remove unstable "botan" and rename ''botan1.10 ... | Closed | |
|
|
Any | Implementation Request | Low | Low | [nut] add Network UPS Tools 2.7.x package | Closed | |
|
|
Testing | Implementation Request | Low | Medium | [spacefm] add new package | Closed | |
|
|
Any | Implementation Request | Low | Low | [codecrypt] add new package | Closed | |
|
|
Any | Implementation Request | Low | Low | [i2p] add new package | Closed | |
|
|
Any | Implementation Request | Low | Low | [opmsg] add new package | Closed | |
|
|
Any | Feature Request | Low | Low | [scribus] missing hunspell support | Closed | |
|
|
Any | Feature Request | Low | Very Low | [openrc] services should be added to runlevels through ... | Closed | |
|
|
Any | Feature Request | Low | Low | [npapi-vlc] package from git source | Closed | |
|
|
Any | Drop Request | Low | Low | [gegl02] remove unmaintained version of GEGL | Closed | |
|
|
Any | Drop Request | Low | Low | [nginx-mainline] remove unstable and duplicated package | Closed | |
|
|
Any | Drop Request | Low | Low | [libreoffice-fresh*] remove unstable and duplicated pac ... | Closed | |
|
|
Any | Drop Request | Low | Low | [autoconf-2.64] remove duplicated package | Closed | |
|
|
Any | Drop Request | Low | Low | [wine*] remove unstable and staging packages | Closed | |
|
|
Any | Bug Report | Low | High | [php-fpm] service fails to start | Closed | |
|
|
Any | Bug Report | Low | Medium | [openrc] Error: fopen(/run/openrc/rc.log) failed: No su ... | Closed | |
|
|
Any | Bug Report | Low | Medium | [cryptsetup] when dmcrypt start, the "/" filesystem, m... | Assigned | |
|
|
Any | Bug Report | Low | Medium | [cryptsetup] can't umount luks filesystem on reboot/shu ... | Closed | |
|
|
Any | Bug Report | Low | Medium | [samba] wrong permissions on /etc/conf.d folder | Closed | |
|
|
Any | Bug Report | Low | Low | [x11vnc] service contains error: "Service 'x11vnc' need ... | Closed | |
|
|
Any | Bug Report | Low | Critical | [openvswitch-lts] netifrc fails to start openvwitch int ... | Closed | |
|
|
Any | Bug Report | Low | Critical | [hostapd] fails to start at boot when using openvwitch ... | Closed | |
|