Packages

Description:

• “net_veth” and “net_macsec” initscripts contains some issues.

Additional info:

• netifrc 0.6.0-2.backports1

/etc/conf.d/net_veth

-# Source Interface (host)
-IFSRC=interface_host
+# Source Interface (host), example: IFSRC=veh0
+IFSRC=veh0
 # Set custom parameters on Source Interface
 IFCTS=
-# Destination Interface (guest)
-IFDST=interface_guest
+# Destination Interface (guest), example: IFDST=veg0
+IFDST=veg0
 # Set custom parameters on Destination Interface
 IFCTD=

/etc/conf.d/net_macsec

-# Source Interface (host)
-IFSRC=interface_host
-# Network init service dependency from Source Interface
-#IFDEP=net.interface_host
-# Destination Interface (macsec/guest)
-IFDST=interface_macsec
+# Source Interface (host), example: IFSRC=eth0
+IFSRC=eth0
+# Network init service dependency from Source Interface, example: IFDEP=net.eth0
+IFDEP=
+# Destination Interface (macsec/guest), example: IFDST=macsec0
+IFDST=macsec0
 # Set custom parameters on MACsec Interface
 IFCTD=

---

 IFPAR="cipher gcm-aes-128
        icvlen 16
        encrypt on
        protect off
        replay off
        send_sci on
-       validate strict"
+       validate disabled"

---

-# Add receive channels and/or receive association keys (RXSC), examples:
-#
-# [sci_<0..ffffffffffffffff(hex)>|port_<1..65535(dec)>_address_<00:00:00:00:00:00..ff:ff:ff:ff:ff:ff(hex)>][_<on/off>]
-#
-# sci_0
-# sci_ffffffffffffffff_on
-# port_1_address_00:00:00:00:00:00
-# port_2_address_ff:ff:ff:ff:ff:ff_off
-#
-# [sci_<0..ffffffffffffffff(hex)>_|port_<1..65535(dec)>_address_<00:00:00:00:00:00..ff:ff:ff:ff:ff:ff(hex)>_]sa_<0..3(dec)>_[pn_<1..4294967295(dec)>_][<on/off>_]key_<00..ff(hex)>_<00000000000000000000000000000000..ffffffffffffffffffffffffffffffff(hex)>
-#
-# sa_0_key_00_00000000000000000000000000000000
-# sa_1_key_pn_1_01_f00f00f00f00f00f00f00f00f00f00f0
-# sa_2_key_on_32_de_de00de00de00de00de00de00de00de00
-# sa_3_key_pn_16345_off_a1_fca1fca1fca1fca1fca1fca1fca1fca1
-# sci_0_sa_0_key_00_00000000000000000000000000000000
-# sci_32_sa_1_key_pn_1_01_f00f00f00f00f00f00f00f00f00f00f0
-# sci_451_sa_2_key_on_32_de_de00de00de00de00de00de00de00de00
-# sci_7438f_sa_3_key_pn_16345_off_a1_fca1fca1fca1fca1fca1fca1fca1fca1
-# port_1_address_00:00:00:00:00:00_sa_0_key_00_00000000000000000000000000000000
-# port_2_address_ff:ff:ff:ff:ff:ff_sa_1_key_pn_1_01_f00f00f00f00f00f00f00f00f00f00f0
-# port_3_address_00:00:00:ff:ff:ff_sa_2_key_on_32_de_de00de00de00de00de00de00de00de00
-# port_4_address_ff:ff:ff:00:00:00_sa_3_key_pn_16345_off_a1_fca1fca1fca1fca1fca1fca1fca1fca1
+# Add receive channels and/or receive association keys (RXSC), examples:
+#
+# "[sci <0..ffffffffffffffff(hex)>|port <1..65535(dec)> address <00:00:00:00:00:00..ff:ff:ff:ff:ff:ff(hex)>][ <on/off>]"
+#
+# "sci 0"
+# "sci ffffffffffffffff on"
+# "port 1 address 00:00:00:00:00:00"
+# "port 2 address ff:ff:ff:ff:ff:ff off"
+#
+# "[sci <0..ffffffffffffffff(hex)> |port <1..65535(dec)> address <00:00:00:00:00:00..ff:ff:ff:ff:ff:ff(hex)> ]sa <0..3(dec)> [pn <1..4294967295(dec)> ][<on/off> ]key <00..ff(hex)> <00000000000000000000000000000000..ffffffffffffffffffffffffffffffff(hex)>"
+#
+# "sci 0 sa 0 key 00 00000000000000000000000000000000"
+# "sci 32 sa 1 pn 1 key 01 f00f00f00f00f00f00f00f00f00f00f0"
+# "sci 451 sa 2 on key de de00de00de00de00de00de00de00de00"
+# "sci 7438f sa 3 pn 16345 off key a1 fca1fca1fca1fca1fca1fca1fca1fca1"
+# "port 1 address 00:00:00:00:00:00 sa 0 key 00 00000000000000000000000000000000"
+# "port 2 address ff:ff:ff:ff:ff:ff sa 1 pn 1 key 01 f00f00f00f00f00f00f00f00f00f00f0"
+# "port 3 address 00:00:00:ff:ff:ff sa 2 on key de de00de00de00de00de00de00de00de00"
+# "port 4 address ff:ff:ff:00:00:00 sa 3 pn 16345 off key a1 fca1fca1fca1fca1fca1fca1fca1fca1"
+#
+# IFRSC=("port 1 address 00:00:00:00:00:00 on"
+#        "port 1 address 00:00:00:00:00:00 sa 0 pn 1 on key 00 00000000000000000000000000000000"
+#        "sci ffffffffffff0001 on"
+#        "sci ffffffffffff0001 sa 0 pn 1 on key 00 ffffffffffffffffffffffffffffffff")
 IFRSC=()

-# Add trasmition association keys (TXSC) , examples:
-# sa_<0..3(dec)>_[pn_<1..4294967295(dec)>_][<on/off>_]key_<00..ff(hex)>_<00000000000000000000000000000000..ffffffffffffffffffffffffffffffff(hex)>
-#
-# sa_0_key_00_00000000000000000000000000000000
-# sa_1_key_pn_1_01_f00f00f00f00f00f00f00f00f00f00f0
-# sa_2_key_on_32_de_de00de00de00de00de00de00de00de00
-# sa_3_key_pn_16345_off_a1_fca1fca1fca1fca1fca1fca1fca1fca1
+# Add trasmition association keys (TXSC) , examples:
+# "sa <0..3(dec)> [pn <1..4294967295(dec)> ][<on/off> ]key <00..ff(hex)> <00000000000000000000000000000000..ffffffffffffffffffffffffffffffff(hex)>"
+#
+# "sa 0 key 00 00000000000000000000000000000000"
+# "sa 1 pn 1 key 01 f00f00f00f00f00f00f00f00f00f00f0"
+# "sa 2 on key de de00de00de00de00de00de00de00de00"
+# "sa 3 pn 16345 off key a1 fca1fca1fca1fca1fca1fca1fca1fca1"
+#
+# IFTSC=("sa 0 pn 1 on key 00 00000000000000000000000000000000")
 IFTSC=()

/etc/init.d/net_macsec

                         if [[ $IFRSC ]]; then
-                                for mac_rxsc in ${IFRSC[@]}; do
-                                        ip macsec add $IFDST rx ${mac_rxsc/_/ }
+                                for mac_rxsc in "${IFRSC[@]}"; do
+                                        ip macsec add $IFDST rx $mac_rxsc
                                 done
                         fi
                         if [[ $IFTSC ]]; then
-                                for mac_txsc in ${IFTSC[@]}; do
-                                        ip macsec add $IFDST tx ${mac_txsc/_/ }
+                                for mac_txsc in "${IFTSC[@]}"; do
+                                        ip macsec add $IFDST tx $mac_txsc
                                 done
                         fi

$ pacman -Si netifrc
Repository      : core
Name            : netifrc
Version         : 0.6.0-2.backports1
Description     : Network interface management scripts
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Netifrc
Licenses        : BSD2
Groups          : base
Provides        : None
Depends On      : eudev
Optional Deps   : iproute2: for interface handler, VPN, bridging and tunneling support (recommended)
                  net-tools: for interface handler support
                  bridge-utils: for bridging support
                  linux-atm: for CLIP and RFC 2684 bridge support
                  wpa_supplicant: for wireless networking support (recommended)
                  wireless_tools: for wireless networking support
                  dhcpcd: for DHCP support (recommended)
                  dhclient: for DHCP support
                  busybox: for DHCP support
                  iputils: for APIPA support
                  ifenslave: for bonding interfaces
                  ppp: for PPP and ADSL support (recommended)
                  rp-pppoe: for ADSL support
                  macchanger: for changing MAC addresses
                  ifplugd: for cable in/out detection
Conflicts With  : None
Replaces        : None
Download Size   : 66.18 KiB
Installed Size  : 373.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Tue 03 Jul 2018 12:16:13 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

• Boot “openrc” and/or start “net_{veth,macsec}” initscripts.

Description:

• “net.lo” initscript is forced to load in “boot” runlevel by default.
• “loopback” interface doesn’t need changes.
• “net.lo” initscript conflicts with another network services, like: NetworkManager.
• “net.lo” initscript takes extra processor and memory resources when is useless.

Additional info:

• netifrc 0.6.0-2.backports1

This file needs be removed:
* /etc/runlevels/boot/net.lo

$ pacman -Si netifrc
Repository      : core
Name            : netifrc
Version         : 0.6.0-2.backports1
Description     : Network interface management scripts
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Netifrc
Licenses        : BSD2
Groups          : base
Provides        : None
Depends On      : eudev
Optional Deps   : iproute2: for interface handler, VPN, bridging and tunneling support (recommended)
                  net-tools: for interface handler support
                  bridge-utils: for bridging support
                  linux-atm: for CLIP and RFC 2684 bridge support
                  wpa_supplicant: for wireless networking support (recommended)
                  wireless_tools: for wireless networking support
                  dhcpcd: for DHCP support (recommended)
                  dhclient: for DHCP support
                  busybox: for DHCP support
                  iputils: for APIPA support
                  ifenslave: for bonding interfaces
                  ppp: for PPP and ADSL support (recommended)
                  rp-pppoe: for ADSL support
                  macchanger: for changing MAC addresses
                  ifplugd: for cable in/out detection
Conflicts With  : None
Replaces        : None
Download Size   : 66.18 KiB
Installed Size  : 373.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Tue 03 Jul 2018 12:16:13 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

• Boot “openrc”.
• Install and update [netifrc] package.

Description:

• “udev” initscript is loaded by “udev-trigger”.
• “udev-trigger” is needed load on “boot” runlevel, not”sysinit” one.
• “udev-trigger” initscript is forced to be added in the sysinit runlevel through upgrading package process
• It avoids use “eudev” side-by-side with “vdev”.

Additional info:

• eudev 3.2.5-2

This file need be removed:
* /etc/runlevels/sysinit/udev

This file needs to be changed in "boot" runlevel, not "sysinit" runlevel;
This file needs be included only in the installing process not updating one.
- /etc/runlevels/sysinit/udev-trigger
+ /etc/runlevels/boot/udev-trigger

$ pacman -Si eudev
Repository      : core
Name            : eudev
Version         : 3.2.5-2
Description     : The userspace dev tools (udev) forked by Gentoo, with OpenRC support
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:Eudev
Licenses        : GPL
Groups          : None
Provides        : udev
Depends On      : libeudev  kbd  kmod  hwids  util-linux
Optional Deps   : None
Conflicts With  : udev
Replaces        : udev
Download Size   : 931.20 KiB
Installed Size  : 7072.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Sun 01 Jul 2018 01:26:17 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

• Boot “openrc”.
• Install and update [eudev] package.

Description:

• “sysctl” initscript doesn’t set sysctl parameters on network interfaces.
• “sysctl” initscript needs run “sysctl” initscript after “net” initscript.

Additional info:

• openrc 0.28-18

/etc/init.d/sysctl

-        after clock
+        after clock net

$ pacman -Si openrc
Repository      : core
Name            : openrc
Version         : 0.28-18
Description     : A dependency based init system that works with the system provided init program
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Project:OpenRC
Licenses        : BSD2
Groups          : None
Provides        : None
Depends On      : psmisc  pam
Optional Deps   : netifrc: network interface management scripts
                  networkmanager: network connection manager and user applications
Conflicts With  : None
Replaces        : None
Download Size   : 193.18 KiB
Installed Size  : 1720.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Sun 08 Jul 2018 01:28:16 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

• Boot “openrc”

Description:

• OpenRC needs a minor fix (remount proc)

Additional info:

• openrc 0.28-19

openrc /usr/lib/rc/sh/init.sh

—

-        mount -n -t proc -o noexec,nosuid,nodev,gid=proc,hidepid=2 proc /proc
+        mount -n -t proc -o noexec,nosuid,nodev proc /proc
+        mount -n /proc -o remount,gid=26,hidepid=2

Steps to reproduce:

• Boot OpenRC in chroot with unshare

Description:

• “consolefont” and “keymap” hooks is adapted to systemd using /etc/vconsole.conf file, those hooks are needed to adapt to [openrc] with /etc/conf.d/consolefont and /etc/conf.d/keymaps

Additional info:

• mkinitcpio 23-1.hyperbola3.1

/usr/lib/initcpio/install/consolefont
---
-        [[ -s /etc/vconsole.conf ]] && . /etc/vconsole.conf
+        [[ -s /etc/conf.d/consolefont ]] && . /etc/conf.d/consolefont

-        if [[ $FONT ]]; then
-            for file in "/usr/share/kbd/consolefonts/$FONT".@(fnt|psf?(u))?(.gz); do
+        if [[ $consolefont ]]; then
+            for file in "/usr/share/kbd/consolefonts/$consolefont".@(fnt|psf?(u))?(.gz); do

-            error "consolefont: requested font not found: \`%s'" "$FONT"
+            error "consolefont: requested font not found: \`%s'" "$consolefont"

-This hook loads consolefont specified in vconsole.conf during early 
-userspace.
+This hook loads consolefont specified in /etc/conf.d/consolefont during 
+early userspace.

/usr/lib/initcpio/install/keymap
---
-        for cfg in /etc/{vconsole,locale}.conf; do
+        for cfg in /etc/{conf.d/keymaps,locale}.conf; do

-        loadkeys -q $uc ${KEYMAP:-us} -b > "$BUILDROOT/keymap.bin"
+        loadkeys -q $uc ${keymap:-us} -b > "$BUILDROOT/keymap.bin"

-This hook loads keymap(s) specified in vconsole.conf during early 
-userspace.
+This hook loads keymap(s) specified in /etc/conf.d/keymaps during 
+early userspace.

Repository      : core
Name            : mkinitcpio
Version         : 23-1.hyperbola3.1
Description     : Modular initramfs image creation utility, with eudev support
Architecture    : any
URL             : https://projects.archlinux.org/mkinitcpio.git/
Licenses        : GPL
Groups          : None
Provides        : None
Depends On      : awk  mkinitcpio-busybox>=1.19.4-2  kmod  util-linux>=2.23  libarchive  coreutils  bash  findutils  grep  filesystem>=2011.10-1  gzip  eudev
Optional Deps   : xz: Use lzma or xz compression for the initramfs image
                  bzip2: Use bzip2 compression for the initramfs image
                  lzop: Use lzo compression for the initramfs image
                  lz4: Use lz4 compression for the initramfs image
                  mkinitcpio-nfs-utils: Support for root filesystem on NFS
Conflicts With  : None
Replaces        : None
Download Size   : 38.40 KiB
Installed Size  : 186.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Fri 05 Oct 2018 03:28:32 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

• Use “consolefont” and “keymap” hooks from mkinitcpio

Description:

With the latest release of the kernel, xwindow does not start anymore. I had to revert to 4.9.143.

Additional info:
* package version(s): linux-libre-lts-4.9.150_gnu-0-x86_64.pkg.tar.xz

Steps to reproduce:

Upgrade to the following:
- linux-libre-lts-4.9.150_gnu-0-x86_64.pkg.tar.xz
- linux-libre-lts-headers-4.9.150_gnu-0-x86_64.pkg.tar.xz
- acpi_call-lts-1.1.0-42.hyperbola34.6-x86_64.pkg.tar.xz

And try to start xwindow

Old clients (like the one packages by Hyperbola) no longer work due to changes in Electrum:

https://github.com/kyuupichan/electrumx/pull/760

The fix is to use a newer version.

As the default path of the ServerBin directory is now /usr/libexec/bin:
1. cups-files.conf should be modified/adapted accordingly.
2. The contents of /usr/lib/cups which is currently owned by cups-filters, cups-pdf foomatic-db-engine and smbclient should be moved to /usr/libexec/cups.

As it is, cups doesn’t work in v0.3.

Some addons are currently broken with latest iceweasel-uxp (iceweasel-uxp 52.9.20190926-1)

DownThemAll
Save to Wayback Machine
Self-Destructing Cookies
(and probably others)

g4jc suggested to drop PGO as it could be the culprit.

https://forums.hyperbola.info/viewtopic.php?pid=1149#p1149

Regarding addons, I'm fairly certain flipping the switch on PGO (which makes the browser faster at the expense of wrecking code) is the culprit. We were warned not to use it, and this is planned to be rolled back.

However, Hyperbot has to be scheduled to rebuild the packages and I do not set it's schedule. Will advise.

Description:

Ath9k wifi device not working, possibly bad compilation or issues with gcc

Additional info:
* package version(s)

- gcc-8.4.0-2
- ath9k-htc-firmware-1.4.0-8

* config and/or log files etc.

[    8.302952] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[    8.303011] usbcore: registered new interface driver ath9k_htc
[    8.303067] usb 1-1: Direct firmware load for ath9k_htc/htc_9271-1.4.0.fw failed with error -2
[    8.303073] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[    8.623141] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51008
[    9.683657] ath9k_htc 1-1:1.0: ath9k_htc: Target is unresponsive
[    9.683672] ath9k_htc: Failed to initialize the device

Steps to reproduce:

- Add wifi device with ath9k firmware, for example: TL-WN722N
- pacman -S ath9k-htc-firmware

References:

- https://bugzilla.kernel.org/show_bug.cgi?id=208251

Description: Tried with new compiled version of mumble no open and secured with SSL-certificate is reachable. Log within console:

qt.network.ssl: QSslSocket: cannot resolve SSL_CTX_set_options
qt.network.ssl: QSslSocket: cannot resolve SSL_session_reused
qt.network.ssl: QSslSocket: cannot resolve SSL_set_options
qt.network.ssl: QSslSocket: cannot resolve BN_is_word
qt.network.ssl: QSslSocket: cannot resolve SSL_in_init

<W>2021-08-23 01:00:18.814 QSslSocket: cannot call unresolved function sk_num

<W>2021-08-23 01:00:20.270 QSslSocket: cannot call unresolved function SSL_CTX_set_options

Description:

Update package to 0.4.2 backport version

Note: Is needed by GIMP 2.10.2 backport or update [gegl] to 0.3.34
      Update the [babl] package
      https://issues.hyperbola.info/index.php?do=details&task_id=1051
      https://issues.hyperbola.info/index.php?do=details&task_id=1052
      https://issues.hyperbola.info/index.php?do=details&task_id=1054

Additional info:

gegl 0.3.26-2.hyperbola1

$ pacman -Si gegl
Repository      : extra
Name            : gegl
Version         : 0.3.26-2.hyperbola1
Description     : Graph based image processing framework
Architecture    : x86_64
URL             : http://www.gegl.org/
Licenses        : GPL3  LGPL3
Groups          : None
Provides        : None
Depends On      : babl  libspiro  json-glib
Optional Deps   : libraw: raw plugin
                  openexr: openexr plugin
                  ffmpeg: ffmpeg plugin
                  suitesparse: matting-levin plugin
                  librsvg: svg plugin
                  jasper: jasper plugin
                  libtiff: tiff plugin
                  lua: lua plugin
                  lensfun: lens-correct plugin
Conflicts With  : gegl02
Replaces        : gegl02
Download Size   : 1347.15 KiB
Installed Size  : 6823.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Sun 31 Dec 2017 05:37:41 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

none

Description:

Update package to 2.10.2 backport version

Note: Needs [gegl] 0.4.2 and [babl] 0.1.50
      or update [gegl] 0.3.34 only
      Update the [babl] package
      https://issues.hyperbola.info/index.php?do=details&task_id=1051
      https://issues.hyperbola.info/index.php?do=details&task_id=1052
      https://issues.hyperbola.info/index.php?do=details&task_id=1053

Additional info:

gimp 2.8.22-1.hyperbola1

Repository      : extra
Name            : gimp
Version         : 2.8.22-1.hyperbola1
Description     : GNU Image Manipulation Program, with gegl and libxslt support
Architecture    : x86_64
URL             : https://www.gimp.org/
Licenses        : GPL  LGPL
Groups          : None
Provides        : None
Depends On      : pygtk  lcms  libxpm  libwmf  libxmu  librsvg  libmng  dbus-glib  libexif  gegl  jasper  desktop-file-utils  hicolor-icon-theme  babl  openexr
                  libgudev
Optional Deps   : gutenprint: for sophisticated printing only as gimp has built-in cups print support
                  poppler-glib: for pdf support
                  alsa-lib: for MIDI event controller module
                  curl: for URI support
                  ghostscript: for postscript support
Conflicts With  : gimp-devel
Replaces        : None
Download Size   : 12.12 MiB
Installed Size  : 67.73 MiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Sun 31 Dec 2017 08:42:46 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

none

Description:

Update package to 4.2.6 backport because of multiple security flaw and bugs

Additional info:
* current Hyperbola package version is 4.1.0-1 from December 2014

Example of fix from 4.1.0-1:

* AFL detected security crash in fuzz feature
* tcpcapinfo buffer overflow vulnerablily
* Buffer overflow bug in tcpprep

Steps to reproduce:

none

Description:

[netifrc] update package to 0.6.0 backport version

Fix security errors:

Fix errors:

Changes:

Features:

Note: Please add a extra hotfix patch from git:

netifrc 0.5.1-3

$ pacman -Si netifrc
Repository      : core
Name            : netifrc
Version         : 0.5.1-3
Description     : Network interface management scripts
Architecture    : x86_64
URL             : https://wiki.gentoo.org/wiki/Netifrc
Licenses        : BSD2
Groups          : base
Provides        : None
Depends On      : eudev
Optional Deps   : iproute2: for interface handler, VPN, bridging and tunneling support (recommended)
                  net-tools: for interface handler support
                  bridge-utils: for bridging support
                  linux-atm: for CLIP and RFC 2684 bridge support
                  wpa_supplicant: for wireless networking support (recommended)
                  wireless_tools: for wireless networking support
                  dhcpcd: for DHCP support (recommended)
                  dhclient: for DHCP support
                  busybox: for DHCP support
                  iputils: for APIPA support
                  ifenslave: for bonding interfaces
                  ppp: for PPP and ADSL support (recommended)
                  rp-pppoe: for ADSL support
                  macchanger: for changing MAC addresses
                  ifplugd: for cable in/out detection
Conflicts With  : None
Replaces        : None
Download Size   : 62.75 KiB
Installed Size  : 349.00 KiB
Packager        : André Silva <emulatorman@hyperbola.info>
Build Date      : Wed 24 Jan 2018 09:05:24 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

contains errors in 0.5.1 version

Description:

Hi dear developers of Hyperbola. I work in the field of web development. I use a lot of javascript and nodejs to compile.
Could they do the nodejs update?. I also mention this because Hyperbola works with LTS packages.

Additional info:

* package version(s)

$ sudo pacman -Si nodejs
Repositorio               : community
Nombre                    : nodejs
Versión                   : 7.10.0-1
Descripción               : Evented I/O for V8 javascript
Arquitectura              : x86_64
URL                       : http://nodejs.org/
Licencias                 : MIT
Grupos                    : Nada
Provee                    : Nada
Depende de                : openssl-1.0  zlib  icu  libuv  http-parser  c-ares
Dependencias opcionales   : npm: nodejs package manager
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 4,55 MiB
Tamaño de la instalación  : 18,49 MiB
Encargado                 : Felix Yan <felixonmars@archlinux.org>
Fecha de creación         : mié 03 may 2017 09:50:26 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

$ sudo pacman -Si npm
Repositorio               : community
Nombre                    : npm
Versión                   : 4.5.0-1
Descripción               : A package manager for javascript
Arquitectura              : any
URL                       : https://www.npmjs.com/
Licencias                 : custom:Artistic
Grupos                    : Nada
Provee                    : nodejs-node-gyp
Depende de                : nodejs  semver
Dependencias opcionales   : python2: for node-gyp
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 2,72 MiB
Tamaño de la instalación  : 13,98 MiB
Encargado                 : Felix Yan <felixonmars@archlinux.org>
Fecha de creación         : mié 12 abr 2017 22:08:06 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

- NodeJS LTS (includes npm 5.6.0):

* https://nodejs.org/dist/v8.11.3/node-v8.11.3.tar.gz

* https://nodejs.org/dist/v8.11.3/SHASUMS256.txt.asc

Some errors that I suffer when compiling:
- https://stackoverflow.com/questions/46476741/nodejs-util-promisify-is-not-a-function