Packages

Hello,

Could it be possible to add :

epson-inkjet-printer-escpr

“Epson Inkjet Printer Driver (ESC/P-R) for Linux”

License : GPL2

https://aur.archlinux.org/packages/epson-inkjet-printer-escpr/ https://packages.debian.org/stretch/printer-driver-escpr

In my case, it was needed to use an Epson printer & scanner.

Unlike other mapping software (gnome-maps, emerillon) it does not depend on geoclue/geoclue2 (or on kde packages like marble). The package was added to Arch’s official repos over a year ago. Their PKGBUILD builds fine.

Description:

Hi guys. Could they add PeerTube to Hyperbola?

It’s on AUR.

Under the AGPLv3 license

Additional info:

I see that the PeerTube help configuration with an init.d

This Python script enables users to use PayPal without proprietary JavaScript. The package requires newer Python modules than those provided by Hyperbola.

requests>=2.18.1
lxml>=4.2.3
cssselect>=1.0.3

The source code can be found here, licensed under the GPL.

https://notabug.org/alyssa/pagamigo

Pagamigo was also covered on tech news website soylentnews recently.

https://soylentnews.org/article.pl?sid=18/11/09/0446226

Package is a libpurple plugin for the Matrix protocol which is consistent with Hyperbola’s social contract as Matrix is a federated protocol.

Source code can be found here licensed under GPLv2:

https://github.com/matrix-org/purple-matrix

PKGBUILD for git version is available here (last stable release is from two years ago so git version is probably the best version to use):

https://aur.archlinux.org/packages/purple-matrix-git/

sslsleuth

Description: i3-gaps is a fork of i3 that properly implements gaps.

Additional info:
It is implemented in the AUR https://www.archlinux.org/packages/community/x86_64/i3-gaps/ and it’s source is available on github: https://github.com/Airblader/i3

Could it be possible to add :

mkv-extractor-qt

“Graphical MKV demultiplexer”

https://aur.archlinux.org/packages/mkv-extractor-qt/

License: GPL3

Thanks

Could it be possible to add :

vidcutter

“A modern, simple to use, constantly evolving and hella fast MEDIA CUTTER + JOINER w/ frame-accurate SmartCut technology + Qt5, libmpv, FFmpeg and MediaInfo powering the backend.”

License : GPL3

https://aur.archlinux.org/packages/vidcutter/

https://vidcutter.ozmartians.com/

This addon works for any firefox based browser but not seamonkey based or this.

I wondered if you could implement the iceweasel one for Iceape.

The security issues regarding the package which led to the package’s removal from Hyperbola (old WebKit and Vala dependency) have apparently been resolved in recent releases, see the new comment in this bug report and the latest PKGBUILD in Arch’s repo.

https://launchpad.net/bugs/1698483

https://www.archlinux.org/packages/community/x86_64/midori/

Request for :

qarte

“Allow you to browse into the archive of arte+7 & arteLiveWeb sites and to record your prefered videos.”

https://aur.archlinux.org/packages/qarte

License : GPL3

Description:
Icinga2 is a libre host, service and network monitoring program

Without it is is very difficult to monitor (CPU/Memory/Process...) Hyperbola systems under Icinga2 Web.
Arch Package & Parabola Package

I already tested theses packages on Hyperbola but Systemd + other packages versions dependencies issues.

This would made a very nice addition as Hyperbola is also designed to be installed on servers & virtual machines (my case on +10 machines).

As the title says, it would be great if after

./mach build

, i could do

./mach build-deb

.

In the meantime: if i can install the files with

mach

to a specified root directory, then i can build a deb package by hand. Is that possible?

solicito este paquete [printer-driver-escpr] para estar disponible en hyperbola, quizá sean necesarios los siguientes enlaces

https://aur.archlinux.org/packages/epson-inkjet-printer-escpr/#comment-693540
http://www.openprinting.org/driver/epson-escpr

pd.:
con este paquete es posible imprimir con impresoras epson

Description:

Searx is better in the short term than search engines like Google and DuckDuckGo in that the client-side JavaScript is free and the server-side code is free and public. However, in the long term it can never be a real replacement for non-free search engines while it relies on non-free search engines for data. At this time, the major general purpose search engines who use their own data are all controlled by corporations like Google and Microsoft. The YaCy search engine addresses this by relying on decentralized data based on p2p.

For this reason, I believe that YaCy is socially a better choice than Searx as the default search engine for Iceweasel-UXP. However, it is not at this time a practically better choice. Since YaCy relies on its users to index the web, and does not currently have many users, the search results are not very good. This creates a chicken-and-egg problem, since it will be difficult for YaCy to gain users while its search results are poor.

However, Searx supports YaCy as a source of search engine results. I don’t know of any Searx instances which have YaCy support enabled, presumably since YaCy support would only be useful to users who have YaCy installed locally and running on http://localhost:8090, but Hyperbola could run its own Searx instance, enable YaCy support plus DuckDuckGo, and make this the default search engine for Iceweasel-UXP. This way, Iceweasel-UXP users can use and contribute to YaCy, but supplement YaCy’s search results with results from DuckDuckGo until YaCy becomes strong enough to stand on its own.

Additional info:

* AUR package for YaCy: https://aur.archlinux.org/packages/yacy

* Searx support for YaCy: https://github.com/asciimoo/searx/blob/master/searx/engines/yacy.py

Steps to reproduce: N/A

This is a request to package nnn - a full-featured terminal file manager for low-end devices and the regular desktop.

nnn is available on Debian, Ubuntu (and family), Fedora, OpenSUSE and Arch Linux.

Homepage: https://github.com/jarun/nnn License: BSD 2-Clause

I would highly appreciate if nnn can be added to the repository.

Patch for 4.9 : https://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch

AUR : https://aur.archlinux.org/packages/linux-mptcp/

https://aur.archlinux.org/packages/linux-mptcp/

Kernel Patch for 4.9 :
http://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch

Compile :
https://multipath-tcp.org/pmwiki.php/Users/DoItYourself

Please add xfce4-alsa-plugin (to get rid of pulseaudio plugin on xfce)

License: GPL3

https://aur.archlinux.org/packages/xfce4-alsa-plugin/ https://github.com/equeim/xfce4-alsa-plugin

Description:
Hyperbola has the following SPF implementations:
* libspf2
* perl-mail-spf
* perl-mail-spf-query

However, none of them work out of the box with postfix. There’s postfix-policyd-spf-perl, which uses one the current perl implementations (perl-mail-spf), takes no time to build and all the dependencies are already satisfied with Hyperbola’s packages

Here I made a PKGBUILD that’s compliant with the packaging standards:

pkgname=postfix-policyd-spf-perl
pkgver=2.011
pkgrel=1
pkgdesc='Postfix SPF policy engine, written in Perl'
arch=(i686 x86_64)
url='https://launchpad.net/postfix-policyd-spf-perl/'
license=(GPL)
depends=(perl-mail-spf perl-netaddr-ip perl-sys-hostname-long)
source=("https://launchpad.net/postfix-policyd-spf-perl/trunk/${pkgver}/+download/${pkgname}-${pkgver}.tar.gz"{,.asc})
sha512sums=('22fc00bf74912056a67e937a460ac1fd878f1cb1a3bfa7b19bc5f1e6bc1c36d815dcf8c945e818d242ed5e72a6295bb0e1569446e06b09aefb2842993b8016ba'
            'SKIP')
validpgpkeys=(E7729BFFBE85400FEEEE23B178D7DEFB9AD59AF1) # Scott Kitterman

package() {
  cd "${pkgname}-${pkgver}"

  install -Dm755 "${pkgname}" "${pkgdir}/usr/libexec/postfix/${pkgname}"
  install -Dm644 CHANGES INSTALL README -t "${pkgdir}/usr/share/doc/${pkgname}"
  install -Dm644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}

in the other hand, to give users the possibility of having more options, we could add pypolicyd-spf (AUR), which depends in pyspf (AUR) and other packages that Hyperbola has. In fact, ArchWiki talks about this implementation, but this might not be relevant.

A format is not known or recognized in the original code base. To add a string into at the audio section in xferc.in:

opus = "<audioplayer>,<audioplayer>,audacity;Opus Audio;mp3_32x32.png;mp3_16x16.png;;"

Within the last commit regarding the package simplescreenrecorder the interface for pulseaudio was removed. So far, so good. But without the complete removal of pulseaudio the application is enforced to use ALSA emulation for PulseAudio on systems with libpulse installed and that usually only makes things worse.

Please undo this for version 0.3 until the removal of pulseaudio is complete.

Some users use emacs as a tiling window manager. Please add EXWM[0]

[0]: https://github.com/ch11ng/exwm

Safe Eyes is a program to manage breaks in front of the computer. It has many features that help us adapt it to our needs.