I build Iceweasel-UXP with these commands:

cd /tmp
git clone https://github.com/MoonchildProductions/UXP
cd UXP/application/
git clone https://git.hyperbola.info:50100/software/iceweasel-uxp.git
cd ..
wget http://oscomp.hu/depot/iceweasel-uxp.mozconfig -O .mozconfig
./mach build

but after this, when i give the command

./mach package

then the following happens:
http://oscomp.hu/depot/mach_package_crash.log

As per this bug report the MEGA plugin cannot be compiled using the OpenSSL version provided in hyperbola.

https://github.com/mcrapet/plowshare-module-mega/issues/18

This described solution works (I successfully upgraded the package to version 1.0.2r).

  Install the openssl-1.0 package.
  Run ./configure with the following arguments:

./configure –enable-local OPENSSL_LIBS=’-L/usr/lib/openssl-1.0 -lssl -lcrypto’ OPENSSL_CFLAGS=’-I/usr/include/openssl-1.0’

  run make

Unfortunately this solution (upgrading openssl-1.0) breaks some other packages such as phantomjs and avidemux, so it would be great if the package could be upgraded by Hyperbola’s developers alongside all its dependencies.

Install the base system again in a pc, but when installing some packages there is the error that I describe below. I would ask please correct this problem since you can not install several programs, example: emacs, volumeicon, etc

invalid or corrupted package (PGP signature)).
error: adwaita-icon-theme: signature from “scott sradms0@openmailbox.org” is unknown trust
:: File /var/cache/pacman/pkg/adwaita-icon-theme-3.24.0-1.hyperbola1-any.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).

Description:

The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:

pacman -Ql rtkit
rtkit /etc/
rtkit /etc/dbus-1/
rtkit /etc/dbus-1/system.d/
rtkit /etc/dbus-1/system.d/org.freedesktop.RealtimeKit1.conf
rtkit /usr/
rtkit /usr/bin/
rtkit /usr/bin/rtkitctl
rtkit /usr/lib/
rtkit /usr/lib/rtkit/
rtkit /usr/lib/rtkit/rtkit-daemon
rtkit /usr/share/
rtkit /usr/share/dbus-1/
rtkit /usr/share/dbus-1/interfaces/
rtkit /usr/share/dbus-1/interfaces/org.freedesktop.RealtimeKit1.xml
rtkit /usr/share/dbus-1/system-services/
rtkit /usr/share/dbus-1/system-services/org.freedesktop.RealtimeKit1.service
rtkit /usr/share/licenses/
rtkit /usr/share/licenses/rtkit/
rtkit /usr/share/licenses/rtkit/COPYING
rtkit /usr/share/licenses/rtkit/LICENSE
rtkit /usr/share/man/
rtkit /usr/share/man/man8/
rtkit /usr/share/man/man8/rtkitctl.8.gz
rtkit /usr/share/polkit-1/
rtkit /usr/share/polkit-1/actions/
rtkit /usr/share/polkit-1/actions/org.freedesktop.RealtimeKit1.policy

* package version(s)
rtkit 0.11-1.hyperbola1

* config and/or log files etc.

Jun 26 10:41:50 gnu mtp-probe: checking bus 1, device 8: “/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4”
Jun 26 10:41:50 gnu mtp-probe: bus: 1, device: 8 was not an MTP device
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu pulseaudio[4401]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files

Steps to reproduce:

Description:
notmuch-mutt fails to compile without perl-mail-message which is missing in Hyperbola

Steps to reproduce:
Install notmuch-mutt and try `notmuch-mutt` at the command line. Then install `perl-mail-message` from Arch and try again.

See example:

hypervideo https://www.youtube.com/watch?v=3vpGZ69CBYM[youtube] 3vpGZ69CBYM: Downloading webpage
[youtube] 3vpGZ69CBYM: Downloading video info webpage
WARNING: Unable to extract video title
WARNING: Requested formats are incompatible for merge and will be merged into mkv.
[download] Destination: _-3vpGZ69CBYM.f137.mp4

Additional info:
* package version

Repositorio               : community
Nombre                    : clamtk
Versión                   : 5.24-1
Descripción               : Easy to use, light-weight, on-demand virus scanner for Linux
                            systems
Arquitectura              : any
URL                       : https://dave-theunsub.github.io/clamtk/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : clamav  perl  gtk2-perl  perl-locale-gettext  perl-libwww
                            perl-http-message  perl-lwp-protocol-https  perl-text-csv
                            perl-json  python  zenity  desktop-file-utils  gnome-icon-theme
                            cron
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 179,90 KiB
Tamaño de la instalación  : 1378,00 KiB
Encargado                 : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación         : sáb 19 nov 2016 20:25:20 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ clamtk
Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.

Steps to reproduce:

* Install clamtk in all version

Description:

groff is typesetting system similar to TeX/LaTeX however, it is very small and very usable. It is not built properly with URW fonts, or such are missing, I cannot know all details. Overall groff package is basically somehow broken.

It shall depend on proper fonts, and such fonts should already be built, including their Unicode versions.

Package is only partially built.

Description:

I may be wrong for I did not migrate to 0.3 as of yet, but I think that `msmtp` has been forgotten and needs to be recompiled with `libressl`.

Please remove this report if I am mistaken.

As the default path of the ServerBin directory is now /usr/libexec/bin:
1. cups-files.conf should be modified/adapted accordingly.
2. The contents of /usr/lib/cups which is currently owned by cups-filters, cups-pdf foomatic-db-engine and smbclient should be moved to /usr/libexec/cups.

As it is, cups doesn’t work in v0.3.

Since 0.3 release, i’m unable to mount my sshfs share from my desktop.

For reference, my fstab entry :

sshfs#anon@server:/srv/nfs/data /mnt/data fuse noauto,user,_netdev,x-gvfs-show,x-gvfs-name=data 0 0

When I double-click on the desktop icon (xfce), it says : “Impossible to mount data”

But, I’m able to mount the share if I enter the command manually in a terminal as user.

sshfs anon@server:/srv/nfs/data /mnt/data

So, it is not a problem of writing rights on mountpoint /mnt/data
I suspect an issue with fuse2 since it is a dependency of sshfs and it is in relation with mounting share from desktop.

It worked fine on the previous version of Hyperbola. The word user/username does not show up. A workaround is to wait 10 seconds and enter the username and click enter - then it will switch correctly to the password screen (otherwise you need to enter the username and password at least twice in order to successfully login).

Probably related to this bug:

https://issues.hyperbola.info/index.php?do=details&task_id=1419

[alon@T60-hyperbola ~]$ lp -d HP_OfficeJet_Pro_8710 /home/alon/Desktop/all/testpages/clean_page.pdf
    lp: Unsupported document-format "application/pdf".
    [alon@T60-hyperbola ~]$ lp -d HP_OfficeJet_Pro_8710 /home/alon/Desktop/all/testpages/clean_page.ps
    lp: Unsupported document-format "application/postscript".

When updating packages this warning appears:

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

I added
<quote>modules=”fs-fuse”</quote>
to /etc/conf.d/modules (and also “fuse” instead).

I looked in /var/log/rc.log and I see this line

<quote>modprobe: FATAL: Module fs-fusetun not found in directory /lib/modules/4.9.194-gnu-1-lts</quote>

It looks like modprobe added “tun” to the filename which prevents loading the module.

One can mount exfat by running commands such as “sudo modprobe fuse” and “sudo mount.exfat /dev/sdc1 /mnt/storage” but it is inconvenient.

Also, loading fuse at startup is problematic - see here:

https://issues.hyperbola.info/index.php?do=details&task_id=1433

Description:

On a system which lacks support for either the vfio kernel module, or lacks IOMMU hardware, it is no longer possible to use host USB device assignment

Additional info:
* package version(s)

# pacman -Si libvirt
Repositorio               : community
Nombre                    : libvirt
Versión                   : 3.2.0-2.hyperbola9
Descripción               : API for controlling virtualization engines
                            (openvz,kvm,qemu,xen,etc), with eudev, libressl and OpenRC support
Arquitectura              : x86_64
URL                       : https://libvirt.org/
Licencias                 : LGPL-2.1
Grupos                    : Nada
Provee                    : Nada
Depende de                : e2fsprogs  gnutls  iptables  libxml2  parted  polkit  python2
                            avahi  yajl  libpciaccess  eudev  dbus  libxau  libxdmcp  libpcap
                            libcap-ng  curl  libsasl  libgcrypt  libgpg-error  libressl
                            libxcb  gcc-libs  iproute2  libnl  libx11  numactl  gettext  ceph
                            libssh2  netcf
Dependencias opcionales   : ebtables: required for default NAT networking
                            dnsmasq: required for default NAT/DHCP for guests
                            bridge-utils: for bridged networking
                            openbsd-netcat: for remote management over ssh
                            qemu
                            radvd
                            dmidecode
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 6,93 MiB
Tamaño de la instalación  : 41,21 MiB
Encargado                 : HyperBuilder <hyperbuilder@hyperbola.info>
Fecha de creación         : vie 19 jul 2019 08:21:25 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* Patch

- https://www.redhat.com/archives/libvir-list/2017-April/msg00594.html

Steps to reproduce:

- Install package

After installing and adding it to the configuration under /etc/conf.d/modules the concurrent module won’t be loaded at all.

The daemon is not working and the following error-message occurs when trying to starting up:

cdemu: Daemon: D-Bus: failed to get proxy for 'org.freedesktop.DBus' on session bus: Cannot autolaunch D-Bus without X11 $DISPLAY!
Daemon initialization and start failed!

Hello,

I’m unable to print some pdfs on my Hyperbola 3.0 system.
Some background :

cups is installed, service enabled and working
system-config-printer is installed and my printer has been correctly added.

I can print most pdfs and text files but recently with a pdf, it fails to print it.* And system-config-printer returned the following error (see capture) :

Printer "EPSON XP-620-Series" requires the '/usr/lib/cups/filters/epson-escpr-wrapper' but it is not currently installed.

Currently, “epson-escpr-wrapper” is installed but it is in :

/usr/libexec/cups/filters/epson-escpr-wrapper

Looking at source code of system-config-printer, it expects that wrapper to be installed in “/usr/lib/” so I tried to symlink that “epson-escpr-wrapper” to “/usr/lib/cups/filters” but it doesn’t work..

*With a Debian system and the exact same configuration, the “problematic” pdf prints just fine so it is not an issue with the pdf.

rrip_gui does not work. The fix is to install cairo-gobject which is not in the repos. Attached is a working PKGBUILD adapted from the official one.

the top part of any document it opens flickers like crazy like a strobing effect. I would appreciate it if this was fixed so that it wouldn’t do that. :)

In fact, just opening a blank document does this. ;/

An example:

$ hypervideo https://soundcloud.com/moshe-feiglin/wuh9dlykfhok [soundcloud] moshe-feiglin/wuh9dlykfhok: Downloading webpage
[soundcloud] moshe-feiglin/wuh9dlykfhok: Downloading info JSON
[soundcloud] 717666847: Downloading track url
WARNING: Unable to download JSON metadata: HTTP Error 401: Unauthorized
[soundcloud] 717666847: Checking fallback video format URL [soundcloud] 717666847: fallback video format URL is invalid, skipping
ERROR: No video formats found;

                  Error: Nonfree Bytecode Required!

     It's currently impossible to download this video with DRM.

    Hypervideo protects your freedom by avoiding DRM and nonfree
                        bytecode parsing.

                            More info:

As per the source code, xdg-utils is meant to work with firefox, google-chrome, and other browsers. It is missing support for -uxp applications.

When i try to set the brightness on my screen, with xbacklight -set 100,

it does this:

No outputs have backlight property

and it doesn’t really matter if I set it lower than 100 or what it currently is at.

Fix when you can please!