https://github.com/loh-tar/wpa-cute/releases

I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.

I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)

or 2019 january. :)

WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:

https://wiki.archlinux.org/index.php/Wpa_supplicant:

Password-related problems

wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.

In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:

# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf

In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed.
Problems with eduroam and other MSCHAPv2 connections

This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.

but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.

It says it cannot get the status of wpa_supplicant when I load it.

This could be an issue if you get rid of NetworkManager for some users.

So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)

Does not need any insane depends, such as dbus, as far as the website says:

https://developers.hp.com/hp-linux-imaging-and-printing/install/manual/distros/other

its optional,

I would like to see it readded in the future...

I need it for printing, only one of my laptops is on 0.3, for this purpose at this time.

/sbin/openrc-run: bad interpreter: No such file or directory

I get this error whenever I try to start dhcpcd with sv /etc/runit/

And for sndiod I get this doing the same guide,

warning: sndiod: unable to open supervise/ok: file does not exist

Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.

Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.

This is what I did:

=⇒ Add a service:

ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>

more or less, I used this guide.

Refer To A Pain Clinic?

What Conditions Qualify For Pain Management?

Is Chronic Pain Syndrome Real?

Description: User reporting problems with sndio. A further check with ALSA showed no active device being used. User has HDMI-sound in usage.

Description: Not finally tested, only getting the logs from chat within here for better analysis later on. User reported that touchpad is not working for now with Hyperbola GNU/Linux 0.4. dmesg-messagelog:

[anonymous@anonymous ~]$ dmesg | grep pad
[ 4.766853] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 4.823723] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0×840300/0x2e800/0×0, board id: 3127, fw id: 8526786

Description: Tried with new compiled version of mumble no open and secured with SSL-certificate is reachable. Log within console:

qt.network.ssl: QSslSocket: cannot resolve SSL_CTX_set_options
qt.network.ssl: QSslSocket: cannot resolve SSL_session_reused
qt.network.ssl: QSslSocket: cannot resolve SSL_set_options
qt.network.ssl: QSslSocket: cannot resolve BN_is_word
qt.network.ssl: QSslSocket: cannot resolve SSL_in_init

<W>2021-08-23 01:00:18.814 QSslSocket: cannot call unresolved function sk_num

<W>2021-08-23 01:00:20.270 QSslSocket: cannot call unresolved function SSL_CTX_set_options

Also known as “Replace the distributor logo as the startup dialogue, and app menu and start button icons from generic” in the long title because of character limitation.

If the distributor logo icon isn’t present, simply insert it and link few others into the appropriate paths that I made and attached below there.

Here is the list of the paths you do:

/usr/share/icons/material-design-{dark,light}/scalable/places/:

• distributor-logo.svg
• distributor-logo-hyperbola.svg (symlink of * distributor-logo.svg)
• start-here{,-hyperbola,-lumina}.svg (symlink of distributor-logo.svg)

Application is not starting and needs therefore a rework.

This issue affects on Lumina desktop environment on the current operating system in the testing stage of Milky Way 0.4 on QEMU.

Here’s what happened, I just tried clicking the screen saver on the preferences on the desktop menu–it happens nothing, and then I just tried searching xscreensaver-settings as an executable file on the terminal–unfortunately, it’s nothing there.

Can anyone fix and rebuild it properly?

Description: Configuration file “syslinux.cfg” under /boot/syslinux/ has to be adjusted. Problem with kernel-images loaded and the concurrent booting device is per default configured to /dev/sda3. Kernel-images are named as “linux-libre” not “linux-libre-lts”.

Description: Problem with execution of “pacstrap /mnt base base-devel syslinux” from 0.3.1-chroot ISO-image with modified pacman.conf and mirrorlist for testing. There are errors for the packages “libxcrypt” and “man-pages” as both have “/usr/share/man/man3/crypt.3.gz” and “/usr”share/man/man3/crypt_r.3.gz” included.

There are issues with the current sndio-package as it seems not possible to get this to work with ALSA.

After setting up and testing our 32-bit QEMU instance, we often tried to initialize the X11, but it refused to do because of video driver issues.

As well as changing to other video drivers on our instance is still the exact issue.

Here is a log from X11 below we attached.

The list contains some icons before being removed for displaying non-libre and trademark-related stuffs, which may infringe the GNU Free System Distribution Guidelines and Hyperbola Packaging Guidelines.

/usr/share/icons/material-design-{dark,light}/scalable/applications/:

• Icons that are libre apps but has problematic issues:
  • nodejs.svg
  • npm.svg
  • umbraco.svg
• Icons that are non-libre apps:
  • apple-finder.svg
  • apple-safari.svg
  • edge.svg
  • emby.svg
  • evernote.svg
  • google-chrome.svg
  • google-earth.svg
  • internet-explorer.svg (discontinued)
  • itunes.svg
  • jira.svg
  • opera.svg
  • plex.svg
  • quicktime.svg
  • skype.svg
  • slack.svg
  • steam.svg
  • teamviewer.svg
  • unity.svg
  • visualstudio.svg
  • whatsapp.svg
• Icons that are non-libre games:
  • black-mesa.svg
  • minecraft.svg
• Icons that are non-libre network services:
  • amazon.svg
  • appnet.svg (discontinued)
  • basecamp.svg
  • bing.svg
  • bitbucket.svg
  • blogger.svg
  • deviantart.svg
  • disqus.svg
  • dribbble.svg
  • dropbox.svg
  • ebay.svg
  • etsy.svg
  • facebook.svg
  • flattr.svg
  • foursquare.svg
  • github.svg
  • gmail.svg
  • google-drive.svg
  • google-maps.svg
  • google-photos.svg
  • google-play.svg
  • google-plus.svg (discontinued)
  • google-translate.svg
  • google-wallet.svg (discontinued, now as Google Pay)
  • instagram.svg
  • jsfiddle.svg
  • lastfm.svg
  • linkedin.svg
  • linode.svg
  • mixcloud.svg
  • onedrive.svg
  • pandora.svg
  • pinterest.svg
  • rdio.svg (discontinued)
  • reddit.svg
  • soundcloud.svg
  • spotify.svg
  • stackexchange.svg
  • stackoverflow.svg
  • telegram.svg
  • tumblr.svg
  • twitch.svg
  • twitter.svg
  • vimeo.svg
  • vine.svg (discontinued)
  • vk.svg
  • wechat.svg
  • xing.svg
  • yelp.svg
  • youtube.svg
• Icons that are non-FSDG operating systems:
  • android.svg
  • ubuntu.svg
• Icons that are non-libre operating systems:
  • apple-ios.svg
• Icons that are trademarked brands and products:
  • apple.svg
  • beats.svg
  • blackberry.svg
  • dolby.svg
  • google.svg
  • google-cardboard.svg (discontinued)
  • google-glass.svg
  • microsoft.svg
  • playstation.svg
  • wii.svg (discontinued)
  • wiiu.svg (discontinued)
• Icons that are trademarked characters:
  • clippy.svg (appearance from the Office Assistant part of M$ Office 97 to 2003)

Here are few changes in the third package build release of Midori, according to the commit[1][2]:

• A SearX instance[3] now replaces three default search engines that are non-free network services; because of freedom issues, they were all expunged.
• Fix key buttons on the key bindings to avoid frustration.
• Plug-in seems now disabled by default.

Reference(s):

• [1]: https://git.hostux.net/HarvettFox96/hyperbola-packages-extra/commit/b5b6e0febf72052d8e7db0ef01c52325969221c4/
• [2]: https://git.hostux.net/HarvettFox96/hyperbola-packages-extra/src/commit/b5b6e0febf72052d8e7db0ef01c52325969221c4/midori/
• [3]: https://searx.fmac.xyz/

This issue affects the game crashed, causing the segmentation fault; it never works and is unplayable.

A few lines of errors appeared here from Numpty Physics. It reads:

[    0ms] [Os.cpp:278 INFO] Got locale: "en_GB.UTF-8", using "en"
[    0ms] [Os.cpp:283 INFO] No translation file for en, send a pull request
Segmentation fault

Also known as “[opensurge] has refused to launch the game after failing to initialize [allegro] audio add-on” in the long title because of character limitation.

This issue affects the game popped me up with an error message; it never works and is unplayable.

Is that package worth using to generate every sentence of any kind?

Polygen:

• Package name: polygen{,-data}
• Release version: 1.0.6
• Release date: June 28, 2004
• Author(s): Alvise Spanò
• Written in: OCaml
• Licence(s): GPL-2
• Website(s): http://polygen.org/ (in Italian)
• Source code URL(s):
  • http://polygen.org/dist/polygen-1.0.6-20040628-src.zip
  • https://github.com/alvisespano/Polygen/ (alternative)
• Arch package URL(s):
  • https://aur.archlinux.org/packages/polygen/
  • https://aur.archlinux.org/packages/polygen-data/
• Arch package status: Not available on the offical repository, but available on AUR.
• Debian package URL(s):
  • https://packages.debian.org/stable/polygen
  • https://packages.debian.org/stable/polygen-data
• Debian package status: Available on the official repository.

The title says that above if without having required library dependencies for most of them under 32-bit.

Few other distros like Debian, NetBSD, and OpenBSD have some own customized login screens, while right here, the actual distro didn’t. I suggest you replacing them for the following paths on the list to come up next package release, which I have three files attached below there.

/etc/X11/xdm:

• Xresources
• Xsetup_0

/usr/share/xdm/pixmaps:

• hyperbola.xpm
• xorg{,-bw}.xpm (removed as unused)

Abiword supports the defunct AltaVista’s Babel Fish translator which queries are redirected to the main Yahoo! page.

...

build() {
  cd $pkgname-$pkgver
  ./configure --prefix=/usr \
    --enable-shared \
    --disable-static \
    --enable-clipart \
    --enable-templates \
    --enable-plugins="aiksaurus applix **babelfish** bmp clarisworks collab docbook \
                      eml epub freetranslation garble gdict gimp goffice grammar \
                      hancom hrtext iscii kword latex loadbindings mathview mht \
                      mif mswrite opendocument openwriter openxml opml ots paint \
                      passepartout pdb pdf presentation psion s5 sdw t602 urldict \
                      wikipedia wmf wml wordperfect wpg xslfo" \
    --enable-introspection
  sed -i -e 's/ -shared / -Wl,-O1,--as-needed\0/g' libtool
  make
}

...

As the title says, some affected symbolic icons look like on a screencap of the GTK3 Widget Factory we attached below.

sudo service httpd status
* status: crashed

Temp solved:

sed 's|start-stop-daemon --start -- ${APACHE2} ${APACHE2_OPTS} -k start|${APACHE2} ${APACHE2_OPTS} -k start|' -i /etc/init.d/httpd

Description:

Ardour require rebuild in v0.3

Additional info:

Repositorio               : extra
Nombre                    : ardour
Versión                   : 5.8-1
Descripción               : Professional-grade digital audio workstation
Arquitectura              : x86_64
URL                       : http://ardour.org/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : liblrdf  liblo  lilv  suil  taglib  aubio  rubberband  gtkmm
Dependencias opcionales   : xjadeo: video monitoring
                            harvid: video timeline
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 8,31 MiB
Tamaño de la instalación  : 38,16 MiB
Encargado                 : Rashif Rahman (Ray) <schiv@archlinux.org>
Fecha de creación         : mié 26 abr 2017 02:45:34 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

$ ldd /usr/lib/ardour5/ardour-5.8.0 | grep 'not found'

	libardourcp.so => not found
	libcanvas.so.0 => not found
	libgtkmm2ext.so.0 => not found
	libptformat.so.0 => not found
	libardour.so.3 => not found
	libmidipp.so.4 => not found
	libevoral.so.0 => not found
	libaudiographer.so.0 => not found
	libpbd.so.4 => not found
	libtimecode.so => not found

Steps to reproduce:

* Install package in v0.3