Packages

This package makes virtualization very simple for newbies. It would be nice to have it in the near future.

Seems like Gufw needs to be activated (as root) at every start-up.
Gets authorization failure during shut-down.

I would greatly appreciate it as it really increases my computer’s battery life a lot.

After installation, none of the addons is present in Kodi!

This package is in debian, and it allows the use of hardware encrypted flash drives.

Al momento de querer previsualizar un archivo txt o cualquier archivo que contenga texto sale este mensaje: ‘/bin/sh: sensible-editor: command not found’

icecast has a failure in hyperbola, every time you want to connect icecast you must launch this command: ‘icecast -b -c /etc/icecast.xml’, without that command icecast is not connected with the client.

## Bug ##

libusb: error [_get_usbfs_fd] libusb couldn’t open USB device /dev/bus/usb/003/003: permission denied libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.

Reference links: https://askubuntu.com/questions/526962/libusb-couldnt-open-usb-device-dev-bus-usb-002-006-permission-denied-libusb

cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency

Error message :

“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14.
BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”

After installing perl-text-charwidth, it works fine.

We seem to have a very old version of xscreensaver... Could you possibly update it?

this may be a security issue/privacy issue.

Hello,

I recently acquired a T400 Thinkpad with 1440×900 panel.
On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.

Both Thinkpad are running the same Hyperbola installation :

Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf)
Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message)
video driver : modesetting
DE : xfce4 with xfwm4

On the Thinkpad x200, everything works great, no issue to report.

On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :

hpd interrupt storm detected on connector hdmi-a-1

And the display (and sound) freezes for 10 seconds (sometimes more !)

As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.

Results :

With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo.
With 4.16.8 : Issue is not present ! No more freeze !

I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series.
Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.

Thanks for your help

Hello,

When mounting an NFS share, I get a warning about missing idmpad.conf

rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...

Debian includes a default config file for idmap :

[General]

Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain

[Mapping]

Nobody-User = nobody
Nobody-Group = nogroup

Description:
The package iceweasel-esr do not restore session and forget logins after restart. It ignores the configurations of user.

Additional info:
* package version(s): 1:52.8.0esr.deb1~deb9u1-1

Steps to reproduce:

1. Click the Menu button and choose Preferences.
2. Select the General panel.
3. In the When Firefox starts drop-down menu, select Show my windows and tabs from last time.
4. Close the about:preferences page. Any changes you’ve made will automatically be saved.
5. Quit of session with Ctrl+Q
6. Starts Iceweasel. The session will not be restored. Clicks Menu, choose History and see that restore session is disabled.

Trying to create a VM using virt-install (1.4.1-2.hyperbola2)

virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'

This error shows up :
ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’

I can’t create the VM.

PS : Error is not present on Debian Stretch with virt-install 1.4.0-5

Thanks for your help.

Description: Zoom web pages either per-site or per-tab, with optional fit-to-width and minimum text size, using the toolbar button, context menu, keyboard shortcuts or mouse wheel.

Additional info: This extension can be used as a workaround to old Firefox bug: Set a Default Text Size (or Page Zoom Level) in Tools > Options > Content > Default Page Size - External Link

Steps to reproduce: N/A

Description: Thanks for the actual release of Icedove in combination with UXP. But for now support for Lightning / Iceowl is missing. Could you please add this package again, either within Icedove-UXP itself or as another addon compatible with UXP?

Description:

The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted.
I do have dbus, gvfs & ntfs-3g installed and active services.

Additional info:
* package version(s)
PCManFM 1.2.5 - using LibFM ver. 1.2.5

Steps to reproduce:
Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.

When I try to mount an ISO file or IMG file (with right-click, “open with disk image mounter” on XFCE4) it fails, the following error message appears :

GDBus.Error.org.freedesktop.UDisks2.Error.Failed: Error opening /dev/loop-control: No such file or directory (udisks-error-quark, 0)

Thanks for your help

In the latest version fixes some bugs and a crash, and small features[1].

[1]: https://dev.minetest.net/Changelog (see section 0.4.17 and 0.4.17.1 for more details)

Hello, would it be possible to have the addon uMatrix ported to be used within the UXP-platform? The addon is complete open and can be found here https://github.com/gorhill/uMatrix

I’ve tried to install different versions and it seems to be incompatible with the concurrent version of Iceweasel-UXP from the repositoy.

A very nasty bug I wasn’t able to find an answer to.
I compiled stuff (buildroot) using menuconfig, the menu display was fine in xfce4-terminal (See screenshot #1)
I restarted the config a few days later with the same command :

$ make menuconfig

and this time the display was messed up (See screenshot #2)

After investigation, I noticed a directory (filled with stuff) have been created in my home folder :

.terminfo

I don’t know why. But anyway, if I delete it, then the display is ok again.
I noticed that if I use good old xterm terminal, then the display is fine even if the .terminfo directory is present. (it uses “xterm” instead of xterm-256color)

But, with xfce4-terminal (and others, I tried with gnome-terminal, sakura..), the display is messed up if the .terminfo directory is present in my home folder.

I also noticed that if I run the command in a screen session, the issue is not present.

(I open xfce4-terminal)

$ screen
$ printenv TERM
screen.xterm-256color
$ make menuconfig (or htop, or other program using ncurses)

= display ok

but with default :

(I open xfce4-terminal)

$ printenv TERM
xterm-256color
make menuconfig (or htop, or other program using ncurses)

= display messed up if .terminfo directory is present

So I have no idea why this .terminfo directory is generated. What could trigger its generation ? Is that an issue with ncurses or something else ?

Thanks for your help

In the latest version fixes several minor bugs and search file function issue[1].

[1]: http://roland65.free.fr/xfe/ (see 1.43 and 1.43.1 in the news section)

A Material-like flat theme for GTK+ 2/3, and GNOME shell, released under a GNU General Public Licence (GNU GPL) 2 and later.

• Arch package URL: https://www.archlinux.org/packages/community/any/materia-gtk-theme
• Source code URL: https://github.com/nana-4/materia-theme

Description:
I install plasma and xorg to my Hyperbola GNU/Linux-libre in Arch-way.
However, after reboot, everything is fine except mouse curse.

I attempt to reinstall plasma-desktop and reboot. But nothing changes.

In attachment, the mouse stop at backward, however it is invisible.

Additional info:
* package version(s)
plasma-desktop == 5.9.5-1
xorg-server == 1.19.6-2.hyperbola1
sddm == 0.14.0-2.hyperbola6

* config and/or log files etc.

Steps to reproduce:

Description: Concurrent package ossp in version 1.3.2-15 has got dependencies to systemd, which is contradicting the whole distribution and the used INIT-system. Therefore my request to port this to OpenRC!

Additional info:
* package version(s) 1.3.2-15