|
Testing | Bug Report | Very Low | Medium | [iceweasel-uxp] Themes are applied but lost after closi ... | Closed | |
Task Description
Description:
Applying any theme from https://addons.mozilla.org/en-US/firefox/themes/ is working but after closing and restarting iceweasel-uxp the theme is lost.
Additional info: * package version : 52.9.0_20180601-8
|
|
Testing | Bug Report | Medium | Medium | [ntop] useradd: the group "ntop" does not exist | Closed | |
Task Description
Description:
During the installation, a group error message is displayed.
Additional info: * package version(s)
$ pacman -Si ntop
Repositorio : community
Nombre : ntop
Versión : 5.0.1-11.hyperbola3
Descripción : A network traffic probe that shows the network usage, with libressl and OpenRC support
Arquitectura : x86_64
URL : https://www.ntop.org/
Licencias : GPL-3
Grupos : Nada
Provee : Nada
Depende de : libevent libpcap gd glibc libxml2 libressl rrdtool pcre geoip lua python2
Dependencias opcionales : Nada
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 21,33 MiB
Tamaño de la instalación : 48,51 MiB
Encargado : HyperBuilder
<hyperbuilder@hyperbola.info>
Fecha de creación : mié 27 mar 2019 17:09:11 -05
Validado por : Suma MD5 Suma SHA-256 Firma
* config and/or log files etc.
$ ntop
Thu Jul 18 19:53:19 2019 Initializing gdbm databases
Thu Jul 18 19:53:19 2019 **ERROR** ....open of /var/lib/ntop/prefsCache.db failed: File open error
Thu Jul 18 19:53:19 2019 Possible solution: please use '-P <directory>'
Thu Jul 18 19:53:19 2019 **FATAL_ERROR** GDBM open failed, ntop shutting down...
Thu Jul 18 19:53:19 2019 CLEANUP[t140566150068416]: ntop caught signal 2 [state=2]
Thu Jul 18 19:53:19 2019 ntop is now quitting...
Steps to reproduce:
* Install package in Milky Way v0.3 Testing
|
|
Testing | Bug Report | Medium | Medium | [ardour] require re-build | Closed | |
Task Description
Description:
Ardour require rebuild in v0.3
Additional info:
Repositorio : extra
Nombre : ardour
Versión : 5.8-1
Descripción : Professional-grade digital audio workstation
Arquitectura : x86_64
URL : http://ardour.org/
Licencias : GPL
Grupos : Nada
Provee : Nada
Depende de : liblrdf liblo lilv suil taglib aubio rubberband gtkmm
Dependencias opcionales : xjadeo: video monitoring
harvid: video timeline
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 8,31 MiB
Tamaño de la instalación : 38,16 MiB
Encargado : Rashif Rahman (Ray) <schiv@archlinux.org>
Fecha de creación : mié 26 abr 2017 02:45:34 -05
Validado por : Suma MD5 Suma SHA-256 Firma
$ ldd /usr/lib/ardour5/ardour-5.8.0 | grep 'not found'
libardourcp.so => not found
libcanvas.so.0 => not found
libgtkmm2ext.so.0 => not found
libptformat.so.0 => not found
libardour.so.3 => not found
libmidipp.so.4 => not found
libevoral.so.0 => not found
libaudiographer.so.0 => not found
libpbd.so.4 => not found
libtimecode.so => not found
Steps to reproduce:
* Install package in v0.3
|
|
Testing | Bug Report | Very Low | High | [cronie] /bin/sh: /usr/bin/nano: No existe el fichero o ... | Closed | |
Task Description
Description:
crontab -e
/bin/sh: /usr/bin/nano: No existe el fichero o el directorio
crontab: "/usr/bin/nano" exited with status 127
Additional info:
Repositorio : core
Nombre : cronie
Versión : 1.5.1-1.hyperbola6
Descripción : Daemon that runs specified programs at scheduled times and related
tools, with logger recommendation and OpenRC support
Arquitectura : x86_64
URL : https://github.com/cronie-crond/cronie/
Licencias : ISC
Grupos : Nada
Provee : cron
Depende de : pam bash run-parts
Dependencias opcionales : smtp-server: send job output via email
smtp-forwarder: forward job output to email server
logger: message logging support
En conflicto con : cron
Remplaza a : Nada
Tamaño de la descarga : 69,08 KiB
Tamaño de la instalación : 266,00 KiB
Encargado : HyperBuilder <hyperbuilder@hyperbola.info>
Fecha de creación : mié 02 ene 2019 03:03:57 -05
Validado por : Suma MD5 Suma SHA-256 Firma
Steps to reproduce:
* Install cronie in v0.3
|
|
Testing | Bug Report | Medium | Medium | [qtcreator] requires libsystemd.so | Closed | |
Task Description
Description: The currently packaged version of QtCreator is built with SystemD support, and on v0.3 no longer works.
Steps to reproduce:
Cannot load plugin because dependency failed to load: ProjectExplorer(4.2.2) Reason: /usr/lib/qtcreator/plugins/libProjectExplorer.so: Cannot load library /usr/lib/qtcreator/plugins/libProjectExplorer.so: (libsystemd.so.0: cannot open shared object file: No such file or directory)
We need to see if it is possible to build binary without libsystemd.so or remove the package.
|
|
Testing | Bug Report | Very Low | Critical | [msmtp] needs libressl | Closed | |
Task Description
Description:
I may be wrong for I did not migrate to 0.3 as of yet, but I think that `msmtp` has been forgotten and needs to be recompiled with `libressl`.
Please remove this report if I am mistaken.
|
|
Testing | Bug Report | Medium | Critical | [rsyslog] wrong reference to /usr/bin/rsyslog in /etc/l ... | Closed | |
Task Description
In `/etc/logrotate.d/rsyslog`, line 5:
/usr/bin/killall -HUP /usr/bin/rsyslogd
should now read as follows:
/usr/bin/killall -HUP /usr/sbin/rsyslogd
|
|
Testing | Bug Report | Very Low | Critical | [Hyperbola GNU/Linux-libre 0.4] Installation issue for ... | Closed | |
Task Description
Description: Problem with execution of “pacstrap /mnt base base-devel syslinux” from 0.3.1-chroot ISO-image with modified pacman.conf and mirrorlist for testing. There are errors for the packages “libxcrypt” and “man-pages” as both have “/usr/share/man/man3/crypt.3.gz” and “/usr”share/man/man3/crypt_r.3.gz” included.
|
|
Testing | Bug Report | High | Critical | [Hyperbola GNU/Linux-libre 0.4] Installation for syslin ... | Closed | |
Task Description
Description: Configuration file “syslinux.cfg” under /boot/syslinux/ has to be adjusted. Problem with kernel-images loaded and the concurrent booting device is per default configured to /dev/sda3. Kernel-images are named as “linux-libre” not “linux-libre-lts”.
|
|
Testing | Bug Report | Medium | Medium | [Hyperbola GNU/Linux-libre 0.4] - Package [xscreensaver ... | Closed | |
Task Description
This issue affects on Lumina desktop environment on the current operating system in the testing stage of Milky Way 0.4 on QEMU.
Here’s what happened, I just tried clicking the screen saver on the preferences on the desktop menu–it happens nothing, and then I just tried searching xscreensaver-settings as an executable file on the terminal–unfortunately, it’s nothing there.
Can anyone fix and rebuild it properly?
|
|
Testing | Bug Report | High | Critical | [Hyperbola GNU/Linux-libre 0.4] Problems with sndio fai ... | Closed | |
Task Description
There are issues with the current sndio-package as it seems not possible to get this to work with ALSA.
|
|
Testing | Bug Report | High | Critical | [wpa_supplicant]: wireless connection does not work | Closed | |
Task Description
Description:
Wireless connection does not work
Additional info: * package version(s)
- wpa_supplicant 2:2.9-1 - libressl 3.2.2-1
* config and/or log files etc.
Successfully initialized wpa_supplicant
OpenSSL: Failed to set cipher string 'DEFAULT@SECLEVEL=1'
SSL: Failed to initialize TLS context.
Failed to initialize EAPOL state machines.
nl80211: deinit ifname=wlp0s18f2u1 disabled_11b_rates=0
Steps to reproduce:
$ wpa_supplicant -B -i device-name -c <(wpa_passphrase “ssid” “psk”)
|
|
Testing | Bug Report | Very Low | Medium | [Hyperbola GNU/Linux-libre 0.4] [opensurge] has refused ... | Closed | |
Task Description
Also known as “[opensurge] has refused to launch the game after failing to initialize [allegro] audio add-on” in the long title because of character limitation.
This issue affects the game popped me up with an error message; it never works and is unplayable.
|
|
Testing | Bug Report | High | Critical | Runit errors, | Closed | |
Task Description
/sbin/openrc-run: bad interpreter: No such file or directory
I get this error whenever I try to start dhcpcd with sv /etc/runit/
And for sndiod I get this doing the same guide,
warning: sndiod: unable to open supervise/ok: file does not exist
Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.
Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.
This is what I did:
=⇒ Add a service:
ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>
more or less, I used this guide.
|
|
Testing | Bug Report | Very Low | High | [xenocara-xkbcomp] Could not resolve keysym XF86FullScr ... | Closed | |
Task Description
While the X session is still running, did anyone happen key bindings being unresponsive? A few lines of errors appeared from xkbcomp because of a missing keyboard symbol on the single TTY. It reads:
The XKEYBOARD keymap compiler (xkbcomp) reports:
> error: Could not resolve keysym XF86FullScreen
Errors from xkbcomp are not fatal to the X server
See also related issues affected on other existing distros, were eventually resolved:
|
|
Testing | Bug Report | Medium | Medium | [Hyperbola GNU/Linux 0.4] Problems with touch- / trackp ... | Closed | |
Task Description
Description: Not finally tested, only getting the logs from chat within here for better analysis later on. User reported that touchpad is not working for now with Hyperbola GNU/Linux 0.4. dmesg-messagelog:
[anonymous@anonymous ~]$ dmesg | grep pad [ 4.766853] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience. [ 4.823723] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0×840300/0x2e800/0×0, board id: 3127, fw id: 8526786
|
|
Testing | Bug Report | Medium | Medium | [Hyperbola GNU/Linux 0.4] Problems with ALSA and sndio ... | Closed | |
Task Description
Description: User reporting problems with sndio. A further check with ALSA showed no active device being used. User has HDMI-sound in usage.
|
|
Testing | Bug Report | Very High | Critical | [Hyperbola GNU/Linux 0.4] QtSSL is not working | Closed | |
Task Description
Description: Tried with new compiled version of mumble no open and secured with SSL-certificate is reachable. Log within console:
qt.network.ssl: QSslSocket: cannot resolve SSL_CTX_set_options qt.network.ssl: QSslSocket: cannot resolve SSL_session_reused qt.network.ssl: QSslSocket: cannot resolve SSL_set_options qt.network.ssl: QSslSocket: cannot resolve BN_is_word qt.network.ssl: QSslSocket: cannot resolve SSL_in_init
<W>2021-08-23 01:00:18.814 QSslSocket: cannot call unresolved function sk_num
<W>2021-08-23 01:00:20.270 QSslSocket: cannot call unresolved function SSL_CTX_set_options
|
|
Testing | Bug Report | Very Low | Very Low | [Hyperbola GNU/Linux-libre 0.4] [wine-stable] doesn't r ... | Closed | |
Task Description
The title says that above if without having required library dependencies for most of them under 32-bit.
|
|
Testing | Bug Report | Medium | Medium | [Hyperbola GNU/Linux-libre 0.4] - Package [android-file ... | Closed | |
Task Description
Application is not starting and needs therefore a rework.
|
|
Testing | Bug Report | Very Low | High | [Hyperbola GNU/Linux-libre 0.4] Video driver issues wit ... | Closed | |
Task Description
After setting up and testing our 32-bit QEMU instance, we often tried to initialize the X11, but it refused to do because of video driver issues.
As well as changing to other video drivers on our instance is still the exact issue.
Here is a log from X11 below we attached.
|
|
Testing | Bug Report | Very Low | Medium | [adwaita-icon-theme] Most symbolic icons look brokenly ... | Closed | |
Task Description
As the title says, some affected symbolic icons look like on a screencap of the GTK3 Widget Factory we attached below.
|
|
Testing | Bug Report | Very Low | Medium | [Hyperbola GNU/Linux-libre 0.4] [numptyphysics] has cra ... | Closed | |
Task Description
This issue affects the game crashed, causing the segmentation fault; it never works and is unplayable.
A few lines of errors appeared here from Numpty Physics. It reads:
[ 0ms] [Os.cpp:278 INFO] Got locale: "en_GB.UTF-8", using "en"
[ 0ms] [Os.cpp:283 INFO] No translation file for en, send a pull request
Segmentation fault
|
|
Testing | Bug Report | Very Low | Medium | [icu] needs to rebuild that should place genccode into ... | Closed | |
Task Description
Here is the problem with ICU where LibreOffice has refused to build without genccode, yet an output log results like this.
makepkg -CLfs:
-- snip --
checking for genccode... no
configure: error: 'genccode' not found in $PATH, install the icu development tool 'genccode'
Error running configure at ./autogen.sh line 299.
-- snip --
pacman -Ql icu:
-- snip --
icu /usr/sbin/
icu /usr/sbin/escapesrc
icu /usr/sbin/genccode
icu /usr/sbin/gencmn
icu /usr/sbin/gennorm2
-- snip --
|
|
Testing | Bug Report | Very Low | Medium | angband game Couldn't load the requested font. | Closed | |
Task Description
Description: When run angband game, the emulator of terminal show me the next, at hyperbola v0.4 testing
[ user | 2021-10-23 | 06:05 ] [/home/user] [0] $ angband angband: Couldn’t load the requested font. (10×20)
Additional info: * package version(s) * config and/or log files etc.
Steps to reproduce: - Install the package - Run in terminal
|
|
Testing | Bug Report | Very Low | Medium | widelands game shared library error | Closed | |
|
|
Testing | Bug Report | Very Low | Medium | warzone2100 fail | Closed | |
|
|
Testing | Bug Report | Very Low | High | espeak no works | Closed | |
|
|
Testing | Bug Report | Medium | Medium | [xfontsel] Problem with font handling | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [irqbalance] needs OpenRC init script | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [audit] needs OpenRC init script | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [cups-filters] needs OpenRC init script | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [hostname-blanker] needs OpenRC init script | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [dmraid] add cron job support | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [dnsmasq] needs OpenRC init script | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [hddtemp] needs OpenRC init script | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [libcanberra] needs OpenRC init scripts | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [logrotate] add cron job support | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [lxc] needs OpenRC init scripts | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [lxcfs] needs OpenRC init script | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [lxdm] needs OpenRC init script | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [lynis] add cron job support | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [man-db] add cron job support | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [minbif] needs OpenRC init script | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [mlocate] add cron job support | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [pacman] add cron job support | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [ppp] needs OpenRC init script | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [shadow] add cron job support | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [firewalld] needs OpenRC init script | Closed | |
|
|
Testing | Feature Request | Medium | Medium | [mariadb] needs OpenRC init script | Closed | |
|