Packages

With kodi 17.1-2.hyperbola1 “The Movie Database” scraper doesn’t work. The error message is :

"Unable to connect to remote server"

Prior version 0.0.25 and below are outdated.

Since version 0.100 and later, there are some changes being redesigned from scratch, added three new weights (including extra bold, light and thin) but not italic or oblique styles, AppStream metadata translations from contributors, and more.

See the version history releases for more details: https://gitlab.gnome.org/GNOME/cantarell-fonts/raw/master/NEWS

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don’t think “steps to reproduce” to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

ipython2 does not work with Milky Way (it used to work with the previous release):

$ ipython2
Traceback (most recent call last):
  File "/usr/bin/ipython2", line 6, in <module>
    from pkg_resources import load_entry_point
  File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3036, in <module>
    @_call_aside
  File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3020, in _call_aside
    f(*args, **kwargs)   
  File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3049, in _initialize_master_working_set
    working_set = WorkingSet._build_master()
  File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 654, in _build_master
    ws.require(__requires__)
  File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 968, in require 
    needed = self.resolve(parse_requirements(requirements))
  File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 854, in resolve 
    raise DistributionNotFound(req, requirers)
pkg_resources.DistributionNotFound: The 'pathlib2' distribution was not found and is required by ipython

It is because ipython2 (and also python2-pickleshare) now requires pathlib2 while Milky Way only ships pathlib (python2-pathlib package) which is deprecated upstream over pathlib2 and this package is also orphaned BTW.

python2-pathlib2 is available in Arch:
https://www.archlinux.org/packages/community/any/python2-pathlib2/

It builds fine on hyperbola and once installed, ipython2 works fine. As of other packages currently depending on the legacy python2-pathlib, I checked them one by one and:

• python2-pickleshare: Broken as it requires pathlib2 (same as ipython2).
• python2-pytest-benchmark: Does not use pathlib at all (neither in setuptools requires.txt nor in the source code).

Description:
The sshguard package should have its /usr/bin/sshguard executable in /usr/sbin, has systemd service files and no OpenRC init script

Additional info:
* sshguard-2.0.0-4
* when I run `sshguard`:

# sshguard
/usr/bin/sshguard: line 87: /usr/bin/journalctl: No such file or directory

* default /etc/sshguard.conf

LOGREADER="LANG=C /usr/bin/journalctl -afb -p info -n1 -t sshd -o cat"
BLACKLIST_FILE=120:/var/db/sshguard/blacklist.db
BACKEND="/usr/lib/sshguard/sshg-fw-iptables"

(commenting the first line temporally solves the issue)

Description:
This package has a strong systemd integration. It has a systemd backend to get files modifications:

(from /etc/fail2ban/jail.conf)

# systemd:   uses systemd python library to access the systemd journal.
#              Specifying "logpath" is not valid for this backend.
#              See "journalmatch" in the jails associated filter config

and many files at /etc/fail2ban/filter.d have systemd stuff

[/etc/fail2ban/filter.d] [0]
$ grep -i systemd *
dovecot.conf:#journalmatch = _SYSTEMD_UNIT=dovecot.service
ejabberd-auth.conf:# Notes.:  systemd journalctl style match filter for journal based backend
postfix.conf:journalmatch = _SYSTEMD_UNIT=postfix.service
postfix-sasl.conf:#journalmatch = _SYSTEMD_UNIT=postfix.service
pure-ftpd.conf:journalmatch = _SYSTEMD_UNIT=pure-ftpd.service + _COMM=pure-ftpd
recidive.conf:journalmatch = _SYSTEMD_UNIT=fail2ban.service PRIORITY=5
sshd.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
sshd-ddos.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd

Additional info:
* fail2ban-0.9.6-2.hyperbola3

Description:

I saw errors in logs because fail2ban couldn’t find /usr/bin/sendmail, and discovered this:

[/etc/fail2ban] [0]
$ grep /usr/bin/sendmail */*
action.d/sendmail-buffered.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                 Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-geoip-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipjailmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-matches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>

Please, also check for other binaries with wrong locations

As of now, the solution is as simple as removing this line → https://git.hyperbola.info:50100/packages/community.git/tree/fail2ban/PKGBUILD#n79

Additional info:
* fail2ban-0.9.6-2.hyperbola3

Description:
The title says everything

Also, it doesn’t follow the FHS (/usr/bin/postgrey should be in /usr/sbin)

Additional info:
* postgrey-1.37-1

Two formats (including HTML and PHP) are provided to run semi-libre/free web browser Mozilla Firefox in the original code base, but it currently got blacklisted due to numerous branding, security and privacy issues, and replaced by the Hyperbola Iceweasel-UXP. To replace existing strings at the web section in xferc.in:

html = "iceweasel-uxp,iceweasel-uxp,<txteditor>;Hyper Text;html_32x32.png;html_16x16.png;;"
htm = "iceweasel-uxp,iceweasel-uxp,<txteditor>;Hyper Text;html_32x32.png;html_16x16.png;;"
php = "iceweasel-uxp,iceweasel-uxp,<txteditor>;PHP Source;html_32x32.png;html_16x16.png;;"

As even the support for GCC 7 is now ending with the release of version 7.5 (https://gcc.gnu.org/ml/gcc/2019-11/msg00099.html) I’d like to propose a renewal of the building-stack - which I think is also needed in time. Also a renewal of the glibc would be good at all!

Description:
linphonec is unusable because a error produce a continuous log

Additional info:
linphone 3.11.1-1.hyperbola1

Steps to reproduce:
linphonec

Log:
linphonec> 2019-12-15 19:25:58:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:03:012 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:08:018 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:13:013 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:18:016 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:23:014 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:28:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:33:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:38:012 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:43:015 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:48:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:53:010 ortp-error-Error in connect: Network is unreachable

CVE-2020-5260 has been fixed very recently in Debian, so I thought I would apply this patch. However, I found out that security patches have not been applied for quite a while (I could account for at least 6 CVEs).

Considering that the version in Debian stretch (2.11.0) is the nearest version with security patches released by Debian and that git project oldest supported version is 2.17, I have used patches from Debian stretch to apply on 2.12.2 currently in Milky Way.

But I have the following error on check():

 |  *** prove ***
 |
 |  Test Summary Report
 |  -------------------
 |  t5570-git-daemon.sh                              (Wstat: 256 Tests: 20 Failed: 10)
 |    Failed tests:  3-7, 15-19
 |    Non-zero exit status: 1
 |  t5811-proto-disable-git.sh                       (Wstat: 256 Tests: 26 Failed: 16)
 |    Failed tests:  2-6, 9-11, 15-19, 21-23
 |    Non-zero exit status: 1
 |  Files=769, Tests=14137, 1101 wallclock secs ( 8.08 usr  1.12 sys + 144.48 cusr 63.42 csys = 217.10 CPU)
 |  Result: FAIL
 |  make[1]: *** [Makefile:45: prove] Error 1
 |  make[1]: Leaving directory '/build/git/src/git-2.12.2/t'
 |  make: *** [Makefile:2291: test] Error 2
 |  ==> ERROR: A failure occurred in check().
 |      Aborting...

This does not seem to be related to my change as the current version in Milky Way produces the same error (IOW the package currently in Milky Way is not rebuidable).

Description:
There is an issue with Christian Rebischke key, i’ve tried to delete /etc/pacman.d/gnupg/ and repopulate it but it doesn’t fix the issue.

error: ascii: signature from “Christian Rebischke (Arch Linux Security Team-Member) Chris.Rebischke@archlinux.org” is unknown trust
File /var/cache/pacman/pkg/ascii-3.15-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).

Steps to reproduce:

sudo pacman -S ascii

Description:

Init script is missing for this package.

I think has some systemd dependecies.

/tmp/alpm_sYmHUS/.INSTALL: line 7: systemd-sysusers: command not found
error: command failed to execute correctly

package version: varnish-5.1.2-1

Any attempt to load Nouveau in X server results in the following error:

nouveau_drv.so: undefined symbol: exaDriverAlloc

Additional info

Steps to reproduce

Users must need DjView to read any DjVu file if it isn’t present on the repository in this distro, so here’s a link about it during the pending process.

• djview: https://git.hostux.net/HarvettFox96/hyperbola-packages-extra/src/commit/028e13cd6fc8731852598646e09045a124965a6a/pending/djview/

• OS name and version: Hyperbola GNU/Linux-libre 0.4
• Kernel name and version: Linux-libre 5.10.103-gnu1-1-lts
• Package name and version: yeahwm 0.3.5-2

The title says it above.

Using both methods to launch YeahWM with SLiM and xinit doesn’t work as it keeps crashing over the segmentation fault.

$ hypervideo -F https://yewtu.be/watch?v=W5fFOECr3EI [youtube] W5fFOECr3EI: Downloading webpage
[youtube] W5fFOECr3EI: Downloading android player API JSON
[youtube] W5fFOECr3EI: Downloading player 11e3a4ec
WARNING: [youtube] nsig extraction failed: You may experience throttling for some formats
n = iXmUjcWoU-JB5WlM ; player = https://www.youtube.com/s/player/11e3a4ec/player_ias.vflset/en_US/base.js W5fFOECr3EI: Traceback (most recent call last):

File "/usr/lib/python3.8/site-packages/hypervideo_dl/extractor/youtube.py", line 2519, in _decrypt_nsig
  self._player_cache[sig_id] = func(s)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/extractor/youtube.py", line 2551, in <lambda>
  return lambda s: jsi.extract_function_from_code(*func_code)([s])
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 536, in resf
  ret, should_abort = self.interpret_statement(stmt, var_stack)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 145, in interpret_statement
  v = self.interpret_expression(expr, local_vars, allow_recursion)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 182, in interpret_expression
  ret, should_abort = self.interpret_statement(try_expr, local_vars, allow_recursion - 1)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 145, in interpret_statement
  v = self.interpret_expression(expr, local_vars, allow_recursion)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 182, in interpret_expression
  ret, should_abort = self.interpret_statement(try_expr, local_vars, allow_recursion - 1)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 145, in interpret_statement
  v = self.interpret_expression(expr, local_vars, allow_recursion)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 256, in interpret_expression
  self.interpret_expression(sub_expr, local_vars, allow_recursion)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 326, in interpret_expression
  left_val, should_abort = self.interpret_statement(
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 145, in interpret_statement
  v = self.interpret_expression(expr, local_vars, allow_recursion)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 326, in interpret_expression
  left_val, should_abort = self.interpret_statement(
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 145, in interpret_statement
  v = self.interpret_expression(expr, local_vars, allow_recursion)
File "/usr/lib/python3.8/site-packages/hypervideo_dl/jsinterp.py", line 464, in interpret_expression
  raise ExtractorError('Unsupported JS expression %r' % expr)

hypervideo_dl.utils.ExtractorError: Unsupported JS expression ‘0⇐c[49]’; please report this issue on https://issues.hyperbola.info/ , filling out the appropriate issue template. Confirm you are on the latest version using pacman -Su
(caused by ExtractorError(”Unsupported JS expression ‘0⇐c[49]’; please report this issue on https://issues.hyperbola.info/ , filling out the appropriate issue template. Confirm you are on the latest version using pacman -Su”)); please report this issue on https://issues.hyperbola.info/ , filling out the appropriate issue template. Confirm you are on the latest version using pacman -Su
ERROR: [youtube] W5fFOECr3EI: Unable to extract uploader id; please report this issue on https://issues.hyperbola.info/ , filling out the appropriate issue template. Confirm you are on the latest version using pacman -Su

dmesg was showing errors about this
Apparently it is not needed and can be deleted. (No errors on my side after deletion (and reboot) and no more errors message)

See this thread : https://forum.manjaro.org/t/openrc-and-73-seat-late-rules-why-deleting-it-was-a-good-thing/24599

I cannot start qemu (2.9.0-1) on latest hyperbola stable release.

Error message : qemu-system-x86_64: error while loading shared libraries: libseccomp.so.2

Thanks for your help

Hello,

When running lightdm-gtk-greeter-settings-pkexec as user.

lightdm-gtk-greeter-settings-pkexec 
==== AUTHENTICATING FOR com.ubuntu.pkexec.lightdm-gtk-greeter-settings ===
Authentication is required to run Settings editor for LightDM GTK+ Greeter
Authenticating as: root
polkit-agent-helper-1: pam_authenticate failed: Permission denied
==== AUTHENTICATION FAILED ===
Error executing command as another user: Not authorized

This incident has been reported.

Am I missing something ? Thanks for your help

groups for my username : sys disk wheel network video audio optical storage libvirt kvm users

Hello,

gparted_polkit doesn’t work, error message (polkit is installed on my system)

Error executing command as another user: No authentication agent found.

If using :

sudo gparted

or

gksu gparted

It works. By default with xfce, the gparted launcher uses gparted_polkit though.

Thanks for your help

Hello,

I can’t install blender.

Error message :

erreur : opencollada: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/opencollada-1.6.45-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : ptex: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/ptex-2.1.28-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : openimageio: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid
:: Le fichier /var/cache/pacman/pkg/openimageio-1.6.18-1.hyperbola1-x86_64.pkg.tar.xz est corrompu (paquet invalide ou corrompu (signature PGP)).
Voulez-vous le supprimer ? [O/n] n
erreur : openshadinglanguage: signature from "Márcio Silva <coadde@hyperbola.info>" is invalid

Already tried to refresh hyperbola keyring with :

pacman-key --populate hyperbola
pacman-key --refresh-keys
pacman -Sy hyperbola-keyring

Thanks for your help

$ service php-fpm start
 * service: No such file or directory

$ pacman -Ql php-fpm | less

php-fpm /etc/
php-fpm /etc/init.d/
php-fpm /etc/init.d/php-fpm
php-fpm /etc/php/
php-fpm /etc/php/php-fpm.conf
php-fpm /etc/php/php-fpm.d/
php-fpm /etc/php/php-fpm.d/www.conf
php-fpm /usr/
php-fpm /usr/bin/
php-fpm /usr/bin/php-fpm
php-fpm /usr/lib/
php-fpm /usr/lib/tmpfiles.d/
php-fpm /usr/lib/tmpfiles.d/php-fpm.conf
php-fpm /usr/share/
php-fpm /usr/share/man/
php-fpm /usr/share/man/man8/
php-fpm /usr/share/man/man8/php-fpm.8.gz
php-fpm /usr/share/php/
php-fpm /usr/share/php/fpm/
php-fpm /usr/share/php/fpm/status.html

Possibly the problem is the removal of runscript.
runscript conflicted in [minicom] with [openrc], detailed in https://issues.hyperbola.info/index.php?do=details&task_id=122 and was removed in openrc https://git.hyperbola.info:50100/packages/core.git/tree/openrc/PKGBUILD#n137

Gufw doesn’t stay on like it usually does when you leave the GUI.

FirewallD doesn’t turn on automatically, and won’t turn on period.

Gufw will not allow me to add any rules.

FirewallD is non-functional in general

That sums up my experiences and thoughts.