|
Stable | Bug Report | Low | Medium | Garbled display with xfce4-terminal (terminfo) | Closed | |
Task Description
A very nasty bug I wasn’t able to find an answer to. I compiled stuff (buildroot) using menuconfig, the menu display was fine in xfce4-terminal (See screenshot #1) I restarted the config a few days later with the same command :
$ make menuconfig
and this time the display was messed up (See screenshot #2)
After investigation, I noticed a directory (filled with stuff) have been created in my home folder :
.terminfo
I don’t know why. But anyway, if I delete it, then the display is ok again. I noticed that if I use good old xterm terminal, then the display is fine even if the .terminfo directory is present. (it uses “xterm” instead of xterm-256color)
But, with xfce4-terminal (and others, I tried with gnome-terminal, sakura..), the display is messed up if the .terminfo directory is present in my home folder.
I also noticed that if I run the command in a screen session, the issue is not present.
(I open xfce4-terminal)
$ screen
$ printenv TERM
screen.xterm-256color
$ make menuconfig (or htop, or other program using ncurses)
= display ok
but with default :
(I open xfce4-terminal)
$ printenv TERM
xterm-256color
make menuconfig (or htop, or other program using ncurses)
= display messed up if .terminfo directory is present
So I have no idea why this .terminfo directory is generated. What could trigger its generation ? Is that an issue with ncurses or something else ?
Thanks for your help
|
|
Stable | Update Request | Low | High | [pigeonhole] needs to be updated (depends on older vers ... | Closed | |
Task Description
Description: The pigeonhole package depends on dovecot 2.2.29.1, which is in version 2.3.4.1-2.hyperbola1.backports1 at the moment. Due to this, I can’t use it
Additional info: * pigeonhole 0.4.18-1
|
|
Stable | Feature Request | Very Low | Low | [linux-libre-lts-xtreme] add package | Closed | |
Task Description
It would be awesome to have a kernel like this imported to hyperbola.
https://www.parabola.nu/packages/kernels/x86_64/linux-libre-lts-xtreme/
|
|
Stable | Bug Report | Very Low | Medium | [kodi-addons-visualization] addons don't work | Closed | |
Task Description
After installation, none of the addons is present in Kodi!
|
|
Stable | Bug Report | Very Low | Low | [lightdm] Wrong locale displayed | Closed | |
Task Description
On a fresh install, the system wide locale is not working with lightdm. According to https://wiki.archlinux.org/index.php/LightDM#Wrong_locale_displayed
One needs to set the LANG variable in /etc/environment to have lightdm in desired language.
Example :
LANG=pt_PT.utf8
Could it be possible to implement a mechanism to automatically add the LANG variable set in /etc/locale.conf to /etc/environement when one install lightdm ?
It is not technically a bug but it could be handy to new users.
|
|
Stable | Bug Report | Very Low | Low | Mupen64plus acts buggy | Closed | |
Task Description
the screen moves back and forth from left to right randomly, no matter what I do, any games any adapters do not work.
I wanted to have some fun with some old games...
Has anyone used mupen64plus successfully on hyperbola 0.2? I cannot get it to work without being completely confusing for the reasons I have mentioned and also, the glaring of the screen. Which only happens with mupen64plus...
|
|
Stable | Bug Report | Very Low | Medium | [cowsay] perl-text-charwidth dependency missing | Closed | |
Task Description
cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency
Error message :
“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14. BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”
After installing perl-text-charwidth, it works fine.
|
|
Stable | Bug Report | Very Low | Medium | [nfs-utils] missing idmapd.conf | Closed | |
Task Description
Hello,
When mounting an NFS share, I get a warning about missing idmpad.conf
rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...
Debian includes a default config file for idmap :
[General]
Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain
[Mapping]
Nobody-User = nobody
Nobody-Group = nogroup
|
|
Stable | Feature Request | Very Low | Low | [digikam]: /usr/bin/cleanup_digikamdb: line 61: kreadco ... | Closed | |
Task Description
Description:
I just guess that this script cleanup_digikamdb depends on kreadconfig which is not there.
Additional info:
extra/digikam 5.5.0-2.hyperbola1 [installed]
Digital photo management application for KDE
Steps to reproduce:
$ cleanup_digikamdb
/usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found
Cleanup Databases v1.1 (digiKam )
————————————————————————- /usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found This program only handles SQLite databases. [~]
|
|
Stable | Bug Report | Very Low | Medium | [Iceweasel] do not restore session and forget logins af ... | Closed | |
Task Description
Description: The package iceweasel-esr do not restore session and forget logins after restart. It ignores the configurations of user.
Additional info: * package version(s): 1:52.8.0esr.deb1~deb9u1-1
Steps to reproduce:
Click the Menu button and choose Preferences.
Select the General panel.
In the When Firefox starts drop-down menu, select Show my windows and tabs from last time.
Close the about:preferences page. Any changes you’ve made will automatically be saved.
Quit of session with Ctrl+Q
Starts Iceweasel. The session will not be restored. Clicks Menu, choose History and see that restore session is disabled.
|
|
Stable | Bug Report | Very Low | High | [iceweasel-uxp] 52.9.0_20180601-8 has an issue on Tabs ... | Closed | |
Task Description
Description:
-Tabs don’t have X on the right to close it. -Download window has an issue on font.
Note: the font is smaller on Tab description and overal it is nice
Additional info: * package version(s): iceweasel-uxp 52.9.0_20180601-8
Steps to reproduce:
|
|
Stable | Feature Request | Very Low | Low | [iceweasel-uxp] Request browser add-on: SSLeuth | Closed | |
Task Description
Name: SSLeuth Version: 0.5.3 (compatible Firefox version 42.* to 56.*) Author(s): Sibi Antony (santony) Licence: GNU General Public Licence (GNU GPL) 3.0 Source code: GIthub Description: How strong is your HTTPS connection? SSleuth ranks an established SSL/TLS connection and gives a brief summary of the cipher suite, certificate and other SSL/TLS parameters.
|
|
Stable | Feature Request | Very Low | Low | [iceweasel-uxp] Request browser add-on: Privacy Setting ... | Closed | |
Task Description
Name: Privacy Settings Version: 0.2.6 (compatible Firefox version 52.* to 56.*) Author: Jeremy Schomery (j_schomery) Licence: Mozilla Public Licence (MPL) 2.0 Source code: Github Description: Alter Firefox’s built-in privacy settings easily with a toolbar panel.
|
|
Stable | Backport Request | Very Low | Medium | Zoom Page WE Backport Request | Closed | |
Task Description
Description: Zoom web pages either per-site or per-tab, with optional fit-to-width and minimum text size, using the toolbar button, context menu, keyboard shortcuts or mouse wheel.
Additional info: This extension can be used as a workaround to old Firefox bug: Set a Default Text Size (or Page Zoom Level) in Tools > Options > Content > Default Page Size - External Link
Steps to reproduce: N/A
|
|
Stable | Feature Request | Very Low | Low | [iceweasel-uxp] Request browser add-on: Classic Theme R ... | Closed | |
Task Description
Name: Classic Theme Restorer Version: 1.7.7.2 (compatible Firefox version 45.* to 56.*) Author: Aris (Aris-t2) Licence: Mozilla Public Licence (MPL) 2.0 Source code: Github Description: Squared tabs, application menu, add-on bar, small button view and many more ‘old’ features for ‘Firefox 29-56’, not for Firefox 57+!
|
|
Stable | Freedom Issue | Very Low | High | [iceweasel-uxp] Replace all default Firefox bookmarks f ... | Closed | |
Task Description
Sometimes I ran Iceweasel-UXP with installed language packs (i18n), but the different bookmarks appeared from Firefox by default.
|
|
Stable | Bug Report | Very Low | High | [lm_sensors] Fail to load it87 module at boot | Closed | |
Task Description
Description:
I ran sensors-detect, it detected two modules :
coretemp it87
Those have been added to /etc/sysconfig/lm_sensors :
# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
# The format of this file is a shell script that simply defines variables:
# HWMON_MODULES for hardware monitoring driver modules, and optionally
# BUS_MODULES for any required bus driver module (for example for I2C or SPI).
HWMON_MODULES="coretemp it87"
But only coretemp is loaded at boot.
I can manually load it87 module (modprobe it87) and get all sensors working but for some reason it87 module is not loaded at boot.
|
|
Stable | Bug Report | Very Low | Low | [iceweasel-uxp] info box not translated | Closed | |
Task Description
Hello,
With iceweasel-uxp, some info boxes are not translated, for now I noticed that when the mouse cursor hovers “add tab” element, the info box showing up is still using english (although I’m using French and the rest is ok), this is very, very minor issue I know.. :o)
See picture attached
|
|
Stable | Bug Report | Very Low | Very Low | Gajim "Unable to run gpg - it may not be available" | Closed | |
Task Description
Description:
Gajim XMPP Client wont start after installing python2-gnupg.
Additional info: * package version(s)
community/python2-gnupg 0.4.0-2
extra/gajim 0.16.8-1.hyperbola2
* config and/or log files etc.
/usr/lib/python2.7/site-packages/gajim/common/gajim.py
Steps to reproduce:
With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:
07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available. Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
raise child_exception
OSError: [Errno 2] No such file or directory Traceback (most recent call last):
File "gajim.py", line 513, in <module>
interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
raise OSError(msg)
OSError: Unable to run gpg - it may not be available.
After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.
# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py 162:GPG_BINARY = ‘gpg1’
By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.
Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.
|
|
Stable | Bug Report | Very Low | High | java cacerts file is empty | Closed | |
Task Description
/etc/ssl/certs/java/cacerts has 0 entries, resulting in ssl handshake errors in java applications.
Package versions: * ca-certificates 20170307-1 * ca-certificates-utils 20170307-1
|
|
Stable | Implementation Request | Very Low | Low | BitWarden, a free & open source password manager | Closed | |
Task Description
Description: The Bitwarden native desktop application. It seems with Iceweasel-UXP doesn’t have the Add-on available.
Additional info: * package version(s) v1.7.0
https://github.com/bitwarden/desktop/releases
|
|
Stable | Bug Report | Very Low | Medium | PCManFM display different behavior | Closed | |
Task Description
Description:
The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted. I do have dbus, gvfs & ntfs-3g installed and active services.
Additional info: * package version(s) PCManFM 1.2.5 - using LibFM ver. 1.2.5
Steps to reproduce: Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.
|
|
Stable | Bug Report | Very Low | Low | [octopi][octopi-notifier] "Aborting notifier as 'pacman ... | Closed | |
Task Description
Hello,
octopi-notifier is not starting / running on my system, when I try to run it manually in a terminal, here is the output :
Aborting notifier as 'pacmanhelper' DBus service could not be found! [ "/usr/share/dbus-1/system-services/org.octopi.pacmanhelper.service" ]
I don’t know if this is applicable / related but I found this on aur website : https://aur.archlinux.org/packages/octopi/
kikadf :
Default build octopi-notifier without knotifications support. To enable edit PKGBUILD, uncomment #USE_NOTIFIER='1'
PS : I’m using XFCE4 autostart to start octopi-notifier (See screenshot attached)
|
|
Stable | Update Request | Very Low | Medium | [minetest] update package to 0.4.17.1 | Closed | |
Task Description
In the latest version fixes some bugs and a crash, and small features[1].
[1]: https://dev.minetest.net/Changelog (see section 0.4.17 and 0.4.17.1 for more details)
|
|
Stable | Backport Request | Very Low | Medium | Request for addon used by Iceweasel-UXP: uMatrix | Closed | |
Task Description
Hello, would it be possible to have the addon uMatrix ported to be used within the UXP-platform? The addon is complete open and can be found here https://github.com/gorhill/uMatrix
I’ve tried to install different versions and it seems to be incompatible with the concurrent version of Iceweasel-UXP from the repositoy.
|
|
Stable | Replace Request | Very Low | Low | [avideo] Replace with youtube-dl | Closed | |
|
|
Stable | Update Request | Very Low | Medium | [xfe] update package to 1.43.1 | Closed | |
|
|
Stable | Bug Report | Very Low | Critical | [hypervideo] YouTube's DRM has prevented this software ... | Closed | |
|
|
Stable | Bug Report | Very Low | Critical | [python2-reportlab] python2-pip dependency | Closed | |
|
|
Stable | Bug Report | Very Low | High | problems with kdenetwork-kopete and kaccounts-intergrat ... | Closed | |
|
|
Stable | Bug Report | Very Low | Low | GNOME cannot lock screen while using LightDM | Closed | |
|
|
Stable | Bug Report | Very Low | Medium | Mouse curse become invisible from beginning in kde5 pla ... | Closed | |
|
|
Stable | Replace Request | Very Low | Medium | Package ossp has got systemd dependencies | Closed | |
|
|
Stable | Replace Request | Very Low | Critical | [spamassassin] includes dependencies for systemd | Closed | |
|
|
Stable | Replace Request | Very Low | Critical | [opendkim] includes dependencies for systemd | Closed | |
|
|
Stable | Bug Report | Very Low | High | [devede] xorriso unsupported option '-dvd-video' | Closed | |
|
|
Stable | Bug Report | Very Low | Medium | [kodi] "The Movie Database" scraper doesn't work | Closed | |
|
|
Stable | Update Request | Very Low | Medium | [cantarell-fonts] update package version to 0.111 | Closed | |
|
|
Stable | Freedom Issue | Very Low | High | GNU Privacy Assistant (GPA) | Closed | |
|
|
Stable | Feature Request | Very Low | High | [youtube-viewer] Added the 'use_invidious_api' config-o ... | Closed | |
|
|
Stable | Bug Report | Very Low | Medium | [arm-unknown-linux-gnueabi-gcc] not working; needs prop ... | Closed | |
|
|
Stable | Bug Report | Very Low | High | [ebtables] require rebuild | Closed | |
|
|
Stable | Bug Report | Very Low | High | [gufw] error response to PolicyKit daemon | Closed | |
|
|
Stable | Bug Report | Very Low | High | [firewalld] Failed to read file "/proc/sys/net/netfilte ... | Closed | |
|
|
Stable | Bug Report | Very Low | High | [vlc] DVB : cache_block stream error: cannot pre fill b ... | Closed | |
|
|
Stable | Bug Report | Very Low | Very Low | [spamassassin] has different directory permissions than... | Deferred | |
|
|
Stable | Bug Report | Very Low | Low | Chemical uknown media types | Closed | |
|
|
Stable | Bug Report | Very Low | Very Low | [postfix] has different directory permissions than 'fil... | Deferred | |
|
|
Stable | Bug Report | Very Low | Medium | [sshguard] violates Hyperbola packaging standards | Closed | |
|
|
Stable | Bug Report | Very Low | Medium | [fail2ban] remove systemd integration | Closed | |
|