Packages

CategoryTask TypePrioritySeveritySummaryStatusProgress
AnySecurity IssueVery HighCritical[openssh] CVE-2018-15919Researching
0%
Task Description

Remotely observable behavior in auth-gss2.c in OpenSSH through 7.8 could be used by remote attackers to detect existence of users on a target system when GSS2 is in use. NOTE: the discoverer states ‘We understand that the OpenSSH developers do not want to treat such a username enumeration (or “oracle”) as a vulnerability.’ https://security-tracker.debian.org/tracker/CVE-2018-15919

AnySecurity IssueVery HighCritical[libssh] CVE-2018-10933Researching
0%
Task Description

Description:
libssh versions 0.6 and above have an authentication bypass vulnerability in
the server code. By presenting the server an SSH2_MSG_USERAUTH_SUCCESS message
in place of the SSH2_MSG_USERAUTH_REQUEST message which the server would expect
to initiate authentication, the attacker could successfully authentciate
without any credentials.

Additional info:
* package version(s) : extra/libssh 0.7.5-1

CVE

AnyDrop RequestVery HighCritical[gksu] is replaced and has to be deleted from our pacma...Assigned
0%
Task Description

Description:
From the author’s webpage gksu has been replaced.

Additional info:
* package version(s) : extra/gksu 2.0.2-5

http://www.nongnu.org/gksu/

AnyFreedom IssueVery HighCritical[man-pages] contains nonfree POSIX manual pagesIn Progress
50%
Task Description

Description:

  • Arch distributes a version of man-pages with manual pages from the POSIX standard. The man-pages project is permitted to distribute them and Andries Brouwer assumes that re-distribution by vendors is permitted as well. However, modification is definitively not allowed, hence this contribution by The Institute of Electrical and Electronics Engineers and The Open Group render the entire man-pages package nonfree. The way to solve it is remove all nonfree POSIX manual pages from man-pages package.

Additional info:
* package version(s)

  • 4.11-1

* config and/or log files etc.

  • License file (POSIX-COPYRIGHT):
The Institute of Electrical and Electronics Engineers (IEEE) and
The Open Group, have given us permission to reprint portions of
their documentation.

In the following statement, the phrase ``this text'' refers to
portions of the system documentation.

Portions of this text are reprinted and reproduced in electronic form
from IEEE Std 1003.1, 2013 Edition, Standard for Information Technology
-- Portable Operating System Interface (POSIX), The Open Group Base
Specifications Issue 7, Copyright (C) 2013 by the Institute of Electri-
cal and Electronics Engineers, Inc and The Open Group.  (This is
POSIX.1-2008 with the 2013 Technical Corrigendum 1 applied.) In the
event of any discrepancy between this version and the original IEEE and
The Open Group Standard, the original IEEE and The Open Group Standard
is the referee document.  The original Standard can be obtained online
at http://www.unix.org/online.html .

This notice shall appear on any product containing this material.

Redistribution of this material is permitted so long as this notice and
the corresponding notices within each POSIX manual page are retained on
any distribution, and the nroff source is included. Modifications to
the text are permitted so long as any conflicts with the standard
are clearly marked as such in the text.

Steps to reproduce:

  • See license in /usr/share/licenses/man-pages/POSIX-COPYRIGHT
AnyPrivacy IssueHighCritical[deepin-desktop-base] Check for CNZZ SpywareIn Progress
60%
Task Description

As per a recent discovery, we should check if our deepin is affected by the CNZZ spyware in the AppStore.
https://www.youtube.com/watch?v=v25Dy66AtNI

We also shouldn’t use the AppStore if it exists, due to non-free apps.

Known files:
> usr/share/dbus-1/system-services/com.deepin.daemon.Apps.service
> etc/appstore.json

AnySecurity IssueHighCritical[octopi] uploads system logs to ptpb.pw without confirm...In Progress
0%
Task Description

Octopi 0.9.0 is uploading system logs to ptpb.pw without confirmation through :

Tools
→ SysInfo → ptpb.pw

I think it should be either disabled or add at least a patch to ask for a confirmation.
An other way could be to patch this :

src/globals.cpp
240: * Generates SysInfo file and paste it to ptpb site
255:  QString ptpb = UnixCommand::getCommandOutput("curl -F c=@- https://ptpb.pw/?u=1", tempFile->fileName());
256:  return ptpb;

to :

src/globals.cpp
240: * Generates SysInfo file and paste it to ptpb site
255:  QString ptpb = UnixCommand::getCommandOutput("curl -F c=@- **https://ptpb.pw/", tempFile->fileName());
256:  return ptpb;

This way, you can at least ask for log deletion with the help of log uuid as explained here : https://ptpb.pw/#id10

AnySecurity IssueVery LowCritical[octopi] requires suUnconfirmed
0%
Task Description

would it be possible to make it use sudo instead?

From what I know, sudo is safer. Let me know if you agree this is a problem.

StableBug ReportVery LowCritical[python2-reportlab] python2-pip dependencyAssigned
0%
Task Description

Since python-pip and python2-pip have been removed, I can’t install python2-reportlab because python2-pip is a dependency of this package.
.

StableImplementation RequestVery LowCritical[strongswan] add new packageUnconfirmed
0%
Task Description

Description:

Package strongSwan is missing. Can it please be added to relevant repository? The package’s presence is critical for using IKEv2 in VPN.

Additional info:

* Source: Please see added link

Steps to reproduce:

N/A

AnyBug ReportVery LowCritical[xfce4-power-manager] locking session issueDeferred
0%
Task Description

I probably should’ve mentioned this before, but if it is set to suspend when lid is closed, it should automatically lock. if the security option: lock screen with system is set to sleep is tweaked on it doesn’t lock always.

This is word for word what I wrote in the forums, but yeah... it is a problem say if someone wants to use your laptop without your permission and can do so.

But it is also a problem if you set it to lock instead because it is more prone to overheating when your not using it, and it doesn’t suspend quickly enough.

I have tried this many times and the same story can be told, again and again.

I think this issue should be considered high or critical merely because of the privacy risk if someone gets their hands on your laptop while its on. Even if you have been away... :/

I wonder if anyone else has this issue... well you guys will tell me I am sure. if critical doesn’t match what you think I am sure you will change it. ;)

AnySecurity IssueVery LowCritical[dokuwiki] CVEsUnconfirmed
0%
Task Description

Our current dokuwiki 20170219_b-1 has two serious CVE.

Error message attached after the first installation

AnySecurity IssueVery LowCritical[tcpreplay] CVEsUnconfirmed
0%
Task Description

A huge number of CVEs have been fixed on 4.3.1 :

CVE-2018-20552
CVE-2018-20553
CVE-2018-18408
CVE-2018-18407
CVE-2018-17974
CVE-2018-17580
CVE-2018-17582
CVE-2018-13112

Current Hyperbola version is 4.2.6

StableBug ReportVery LowCritical [kodi] "The Movie Database" scraper doesn't workUnconfirmed
0%
Task Description

With kodi 17.1-2.hyperbola1 “The Movie Database” scraper doesn’t work. The error message is :

"Unable to connect to remote server"
AnyReplace RequestDeferCritical[bzr] replace deprecated GNU Bazaar to BrezyDeferred
0%
Task Description

Description:

  • replace deprecated GNU Bazaar to Brezy for Canis Major

Additional info:

Note: It needs a provide: bazaar and brezy

Steps to reproduce:

  • broken package
AnyReplace RequestDeferCritical[python2] replace deprecated Python 2 to TauthonDeferred
0%
Task Description

Description:

  • replace deprecated Python 2 to Tauthon for Canis Major

Additional info:

Steps to reproduce:

  • Broken python2 packages.
AnyFeature RequestVery HighHigh[timidity++] contains systemd unit fileIn Progress
30%
Task Description

Description:

  • The Arch version of TiMidity++ from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : extra
Name            : timidity++
Version         : 2.14.0-7
Description     : A MIDI to WAVE converter and player
Architecture    : x86_64
URL             : http://timidity.sourceforge.net
Licenses        : GPL
Groups          : None
Provides        : None
Depends On      : libao  jack
Optional Deps   : gtk2: for using the GTK+ interface
                  tk: for using the Tk interface
                  xaw3d: for using the Xaw interface
Conflicts With  : None
Replaces        : None
Download Size   : 530.60 KiB
Installed Size  : 1431.00 KiB
Packager        : Evangelos Foutras <evangelos@foutrelis.com>
Build Date      : Thu 10 Sep 2015 12:55:38 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/system/timidity.service is owned by timidity++ 2.14.0-7

Steps to reproduce:

  • Install package.
AnyFeature RequestVery HighHigh[sage-notebook] contains systemd unit fileIn Progress
30%
Task Description

Description:

  • The Arch version of Sage-notebook from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required. OpenRC init script replacement isn’t possible here because Sage-notebook is using a systemd unit file adapted for users instead of system users.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : sage-notebook
Version         : 0.13-4
Description     : Browser-based notebook interface for SageMath
Architecture    : any
URL             : http://www.sagemath.org
Licenses        : GPL3
Groups          : None
Provides        : None
Depends On      : sagemath  python2-twisted  python2-flask-oldsessions  python2-flask-openid  python2-flask-autoindex  python2-flask-babel  mathjax
Optional Deps   : python2-pyopenssl: to use the notebook in secure mode
Conflicts With  : None
Replaces        : None
Download Size   : 1625.00 KiB
Installed Size  : 9154.00 KiB
Packager        : Antonio Rojas <arojas@archlinux.org>
Build Date      : Thu 04 May 2017 06:12:28 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/user/sage.service is owned by sage-notebook 0.13-4

Steps to reproduce:

  • Install package.
AnyFeature RequestVery HighHigh[erlang-nox] contains systemd unit filesIn Progress
0%
Task Description

Description:

  • The Arch version of Erlang (headless version) from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : erlang-nox
Version         : 19.3-3
Description     : General-purpose concurrent functional programming language developed by Ericsson (headless version)
Architecture    : x86_64
URL             : http://www.erlang.org/
Licenses        : Apache
Groups          : None
Provides        : None
Depends On      : ncurses  openssl
Optional Deps   : erlang-unixodbc: database support
                  java-environment: for Java support
                  lksctp-tools: for SCTP support
Conflicts With  : erlang
Replaces        : None
Download Size   : 39.01 MiB
Installed Size  : 106.73 MiB
Packager        : Jan de Groot <jgc@archlinux.org>
Build Date      : Fri 28 Apr 2017 08:44:33 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/system/epmd.service is owned by erlang-nox 19.3-3
/usr/lib/systemd/system/epmd.socket is owned by erlang-nox 19.3-3

Steps to reproduce:

  • Install package.
AnyFeature RequestVery HighHigh[motion] contains systemd unit fileIn Progress
0%
Task Description

Description:

  • The Arch version of Motion from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : motion
Version         : 4.0.1-2
Description     : A software motion detector which grabs images from video4linux devices and/or from webcams
Architecture    : x86_64
URL             : http://www.lavrsen.dk/foswiki/bin/view/Motion/WebHome
Licenses        : GPL
Groups          : None
Provides        : None
Depends On      : libjpeg  v4l-utils  ffmpeg
Optional Deps   : None
Conflicts With  : None
Replaces        : None
Download Size   : 235.61 KiB
Installed Size  : 923.00 KiB
Packager        : Sergej Pupykin <pupykin.s+arch@gmail.com>
Build Date      : Mon 14 Nov 2016 02:17:55 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/system/motion.service is owned by motion 4.0.1-2

Steps to reproduce:

  • Install package.
AnyFeature RequestVery HighHigh[tinc] contains systemd unit filesIn Progress
0%
Task Description

Description:

  • The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : tinc
Version         : 1.0.31-2
Description     : VPN (Virtual Private Network) daemon
Architecture    : x86_64
URL             : http://www.tinc-vpn.org/
Licenses        : GPL
Groups          : None
Provides        : None
Depends On      : lzo  openssl  zlib
Optional Deps   : None
Conflicts With  : None
Replaces        : None
Download Size   : 107.42 KiB
Installed Size  : 194.00 KiB
Packager        : Evangelos Foutras <evangelos@foutrelis.com>
Build Date      : Mon 13 Mar 2017 01:06:11 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/system/tinc.service is owned by tinc 1.0.31-2
/usr/lib/systemd/system/tinc@.service is owned by tinc 1.0.31-2

Steps to reproduce:

  • Install package.
AnyFeature RequestVery HighHigh[netdata] contains systemd unit files In Progress
0%
Task Description

Description:

The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)
* config and/or log files etc.

Repositorio               : community
Nombre                    : netdata
Versión                   : 1.6.0-3
Descripción               : Real-time performance monitoring, in the greatest possible detail, over the web.
Arquitectura              : x86_64
URL                       : https://github.com/firehol/netdata/wiki
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : libmnl  libnetfilter_acct  zlib
Dependencias opcionales   : nodejs: Webbox plugin
                            lm_sensors: sensors module
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1778,98 KiB
Tamaño de la instalación  : 6515,00 KiB
Encargado                 : Sven-Hendrik Haase <sh@lutzhaase.com>
Fecha de creación         : dom 23 abr 2017 16:24:38 -05
Validado por              : Suma MD5  Suma SHA-256  Firma
community/netdata	/usr/lib/systemd/
community/netdata	/usr/lib/systemd/system/
community/netdata	/usr/lib/systemd/system/netdata.service

Steps to reproduce:

  • Install package
AnyFeature RequestVery HighHigh[backuppc]: contains systemd filesResearching
0%
Task Description

Description:

Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)

community/backuppc 4.1.2-1 [installed]

   Enterprise-grade system for backing up Linux, Windows and MacOS PCs

* config and/or log files etc.

Additional info:

Steps to reproduce: install it

AnyFeature RequestVery HighHigh[gpsd]: contains systemd filesResearching
0%
Task Description

Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)

extra/gpsd 3.16-3 [installed]

   GPS daemon and library to support USB/serial GPS devices

* config and/or log files etc.

Additional info:

Steps to reproduce: install it

StableFeature RequestVery HighHigh[hiawatha]: remove systemd files, provide openrcResearching
0%
Task Description

Description:

Hiawatha contains only systemd files.

It shall be removed and openrc shall be provided

AnyFeature RequestVery HighHigh[dovecot] needs OpenRC init script and contains systemd...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd files

Additional info:

  • dovecot 2.2.29.1-1
dovecot /usr/lib/systemd/system/dovecot.service
dovecot /usr/lib/systemd/system/dovecot.socket
dovecot /usr/lib/tmpfiles.d/dovecot.conf

Steps to reproduce:

  • none
AnyFeature RequestVery HighHigh[onioncat] needs OpenRC init scriptAssigned
0%
Task Description

Description:

  • needs OpenRC init script

Additional info:

  • onioncat 0.2.2.r578-1

Steps to reproduce:

  • none
AnyFeature RequestVery HighHigh[umurmur] needs OpenRC init script and contains systemd...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd file

Additional info:

  • umurmur 0.2.16_a-6
umurmur /usr/lib/systemd/system/umurmur.service

Steps to reproduce:

  • none
AnyFeature RequestVery HighHigh[prosody] needs OpenRC init script and contains systemd...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd files

Additional info:

  • prosody 1:0.10.r7198+.2fd20f372cb1+-2
prosody /usr/lib/systemd/system/prosody.service
prosody /usr/lib/sysusers.d/prosody.conf
prosody /usr/lib/tmpfiles.d/prosody.conf

Steps to reproduce:

  • none
AnyFeature RequestVery HighHigh[unrealircd] needs OpenRC init script and contains syst...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd files

Additional info:

  • unrealircd 4.0.11-2
unrealircd /usr/lib/systemd/system/unrealircd.service
unrealircd /usr/lib/tmpfiles.d/unrealircd.conf

Steps to reproduce:

  • none
AnyFeature RequestVery HighHigh[mcelog] needs OpenRC init script and contains systemd ...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd file

Additional info:

  • mcelog 1:148-1
mcelog /usr/lib/systemd/system/mcelog.service

Steps to reproduce:

  • none
AnyFeature RequestVery HighHigh[bzr] needs OpenRC init script (bzr serve)Assigned
0%
Task Description

Description:

  • needs OpenRC init script (bzr serve), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

  • bzr 2.7.0-2
Note: needs a provide: bazaar

Steps to reproduce:

  • none
AnyFeature RequestVery HighHigh[mercurial] needs OpenRC init scripts (hg serve and chg...Assigned
0%
Task Description

Description:

  • needs OpenRC init scripts (hg serve and chg server), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

  • mercurial 4.2-1
Note: needs a provide: hg

Steps to reproduce:

  • none
AnyImplementation RequestVery HighHigh[murmur-headless] add a Murmur package capable of worki...In Progress
0%
Task Description

Description:

  • Add new a Murmur package capable of working without a graphical user interface. It’s common on servers and embedded devices that requires only interfaces like network (eg. SSH) or serial port to handle services.

Additional info:

  • based on murmur 1.2.19-5

Steps to reproduce:

  • none
AnyImplementation RequestVery HighHigh[asterisk-headless] add an Asterisk package capable of ...In Progress
0%
Task Description

Description:

  • Add an Asterisk package capable of working without a graphical user interface. It’s common on servers and embedded devices that requires only interfaces like network (eg. SSH) or serial port to handle services.

Additional info:

  • based on asterisk 14.4.0-1

Steps to reproduce:

  • none
StableUpdate RequestHighHigh[qt5] upgrade Qt project to the 5.6 LTS version, requir...Deferred
0%
Task Description

Cannot mix incompatible Qt library (version 0×50800) with this library (version 0×50904)
Aborted

./Nextcloud-2.3.3-x86_64.AppImage: /usr/lib/libQt5Core.so.5: version `Qt_5.9’ not found (required by /tmp/.mount_NextclpprMnG/usr/bin/../lib/libqt5keychain.so.1

These two packages are directly affected by an older qt5...

Could you update all the qt packages to the LTS version available?

AnyUpdate RequestMediumHighMake Knock patch for Linux-libre 4.14 LTSUnconfirmed
0%
Task Description

The Knock patches for linux-libre maintained by you at https://git.hyperbola.info:50100/kernels/knock.git/ have support up to linux-libre 4.13 only (and I think it didn’t work for it when I tried it, compilation failed) but from all of those supported versions, the newest maintained generation by the upstream is 4.9.x

However, since newer kernel generations might require reprogramming the patch, I want to request it only for the latest LTS generation which is 4.14. As you know, LTS software are supported for a long time, so it’s worth to make it for linux-libre 4.14.x

This might not be really important for Hyperbola in the short term, but you are the maintainers of the TCP Stealth implementation for Linux-libre and I and maybe other people would like to use it in their projects for newer versions.

Plus, it would be great since while 4.9 kernels can use the GRSec+Knock combination like linux-libre-lts-unofficial-grsec-knock, with support for 4.14 anyone would be able to use a combination of newer patches such as Linux-hardened+Knock (Linux-hardened supports 4.14 and 4.15 as of now) which is what I’d like to do.
https://github.com/copperhead/linux-hardened/releases

AnyBug ReportMediumHigh[postgresql] creating directory Permission deniedUnconfirmed
0%
Task Description

In the File postgresql.install

the output is:

    ==> requires datadir /var/lib/data
    ==> run as user postgres: 'initdb -D /var/lib/data'

when it should be:

    ==> requires datadir /var/lib/postgres/data
    ==> run as user postgres: 'initdb -D /var/lib/postgres/data'

It may be necessary to change:

local datadir = "/var/lib/data"

to

local datadir = "/var/lib/postgres/data"

The comand for default fails:

creating directory /var/lib/data... initdb: could not create directory "/var/lib/data": Permission denied
AnyBug ReportMediumHigh[xf86-video-intel] windows are not rendered correctly i...Requires Testing
100%
Task Description

I’m encountering this bug when using latest Pale Moon (version 2.8.0.1).

https://forum.palemoon.org/viewtopic.php?f=37&t=19941&sid=3cd95f0870b5cef74c582eb9a3ea778a

The bug doesn’t only affect the preferences dialog - other windows are not rendered correctly either such as DownThemAll! add-on (see attached image).

The suggested fix is to update the intel driver (the about:config suggested change makes the preference dialog usable but other windows such as DownThemAll! still aren’t displayed correctly).

I’m using a T60 with intel graphics.

StableBug ReportMediumHigh[tp_smapi] not working with most recent libre kernelResearching
0%
Task Description

Description:
tp_smapi fails to load

Additional info:
* package version(s)
tp_smapi-lts 0.43-1.hyperbola29.5
linux-libre-lts 4.9.143_gnu-0

* config and/or log files etc.
From dmesg:
thinkpad_ec: Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0)
thinkpad_ec: Unknown symbol __x86_indirect_thunk (err 0)

Steps to reproduce:
1. Install tp_smapi and the most recent stable linux-libre-lts
2. Reboot
3. sudo modprobe tp_smapi

AnyBug ReportLowHigh[kaccounts-integration] option to add NextCloud/OwnClou...Unconfirmed
0%
Task Description

Description:

  • Option to add NextCloud/OwnCloud accounts in ‘Online Accounts’ section of System Settings not appearing.

Additional info:
* package version(s)

  • 17.04.0-1

* config and/or log files etc.

  • N/A

Steps to reproduce:

  • Run application
  • Go to ‘Online Accounts’ section of System Settings
AnyBug ReportLowHigh[kdenetwork-kopete] clicking to add an Jabber Account o...Unconfirmed
0%
Task Description

Description:

  • Clicking to add an Jabber Account opens a dialog with no fields to enter information.

Additional info:
* package version(s)

  • 17.04.0-3.hyperbola1

* config and/or log files etc.

  • N/A

Steps to reproduce:

  • Run Application
  • Clicking to add an Jabber Account
AnyBug ReportVery LowHighDesite "noauto" specified in /etc/fstab all devices get...Unconfirmed
0%
Task Description

Description:

I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.

Who can help me, not to mount a device during boot?

AnyImplementation RequestVery LowHigh[glom]: should depend on libgdaUnconfirmed
0%
Task Description

Description:

glom cannot run without libgda, so it should depend on libgda package

StableBug ReportVery LowHigh[lm_sensors] Fail to load it87 module at bootUnconfirmed
0%
Task Description

Description:

I ran sensors-detect, it detected two modules :

coretemp
it87

Those have been added to /etc/sysconfig/lm_sensors :

# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
# The format of this file is a shell script that simply defines variables:
# HWMON_MODULES for hardware monitoring driver modules, and optionally
# BUS_MODULES for any required bus driver module (for example for I2C or SPI).

HWMON_MODULES="coretemp it87"

But only coretemp is loaded at boot.

I can manually load it87 module (modprobe it87) and get all sensors working but for some reason it87 module is not loaded at boot.

StableBug ReportVery LowHighjava cacerts file is emptyUnconfirmed
0%
Task Description

/etc/ssl/certs/java/cacerts has 0 entries, resulting in ssl handshake errors in java applications.

Package versions:
* ca-certificates 20170307-1
* ca-certificates-utils 20170307-1

AnyUpdate RequestVery LowHighufw update/ufw bugUnconfirmed
0%
Task Description

There appears to be a bug with the current version of ufw, 0.35-2

Dunno if updating it would fix it, but it is kind of annoying and possibly security issue.

it says ufw is inactive when I reboot despite it being installed in the runlevel.

AnyImplementation RequestVery LowHigh[epson-inkjet-printer-escpr] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add :

epson-inkjet-printer-escpr

“Epson Inkjet Printer Driver (ESC/P-R) for Linux”

License : GPL2

https://aur.archlinux.org/packages/epson-inkjet-printer-escpr/ https://packages.debian.org/stretch/printer-driver-escpr

In my case, it was needed to use an Epson printer & scanner.

AnyUpdate RequestVery LowHigh[proj]: please update to latest versionUnconfirmed
0%
Task Description

Description:

https://proj4.org/index.html

This package have valuable geodetic applications, and I intend to present Hyperbola GNU/Linux-libre soon in universities and schools in East Africa.

The coordinate system there is not WGS84 and this package only in new version is providing the conversion from East African geographic coordinates to WGS84, and will be very usable in many industrial and private applications.

AnyBug ReportVery LowHigh[iceweasel-uxp] windows don't render correctly in add-o...Researching
0%
Task Description

I can’t switch windows in add-ons such as session manager.

It’s probably the same bug which appears in palemoon (inherited from UXP). See here:

https://issues.hyperbola.info/index.php?do=details&task_id=1160&opened=24&status[0]=

https://forum.palemoon.org/viewtopic.php?f=37&t=19941&sid=3cd95f0870b5cef74c582eb9a3ea778a

AnyBug ReportVery LowHigh[kdelibs4support] XDG_RUNTIME_DIR not setUnconfirmed
0%
Task Description

Description:

This bug only appears when logged in as root on terminal

# kf5-config --version
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Qt: 5.8.0
KDE Frameworks: 5.33.0
kf5-config: 1.0

Additional info:

* package version(s)

$ pacman -Si kdelibs4support
Repositorio               : extra
Nombre                    : kdelibs4support
Versión                   : 5.33.0-1
Descripción               : Porting aid from KDELibs4
Arquitectura              : x86_64
URL                       : https://community.kde.org/Frameworks
Licencias                 : LGPL
Grupos                    : kf5-aids
Provee                    : Nada
Depende de                : kunitconversion  kitemmodels  kemoticons  kded  kparts
Dependencias opcionales   : Nada
En conflicto con          : kde4support
Remplaza a                : kde4support
Tamaño de la descarga     : 3,03 MiB
Tamaño de la instalación  : 17,36 MiB
Encargado                 : Felix Yan <felixonmars@archlinux.org>
Fecha de creación         : jue 13 abr 2017 14:29:47 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Steps to reproduce:

- Install KDE plasma

Showing tasks 1 - 50 of 423 Page 1 of 91 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing