Packages

Hello,

I’m unable to print some pdfs on my Hyperbola 3.0 system.
Some background :

cups is installed, service enabled and working
system-config-printer is installed and my printer has been correctly added.

I can print most pdfs and text files but recently with a pdf, it fails to print it.* And system-config-printer returned the following error (see capture) :

Printer "EPSON XP-620-Series" requires the '/usr/lib/cups/filters/epson-escpr-wrapper' but it is not currently installed.

Currently, “epson-escpr-wrapper” is installed but it is in :

/usr/libexec/cups/filters/epson-escpr-wrapper

Looking at source code of system-config-printer, it expects that wrapper to be installed in “/usr/lib/” so I tried to symlink that “epson-escpr-wrapper” to “/usr/lib/cups/filters” but it doesn’t work..

*With a Debian system and the exact same configuration, the “problematic” pdf prints just fine so it is not an issue with the pdf.

/sbin/openrc-run: bad interpreter: No such file or directory

I get this error whenever I try to start dhcpcd with sv /etc/runit/

And for sndiod I get this doing the same guide,

warning: sndiod: unable to open supervise/ok: file does not exist

Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.

Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.

This is what I did:

=⇒ Add a service:

ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>

more or less, I used this guide.

Description:
notmuch-mutt fails to compile without perl-mail-message which is missing in Hyperbola

Steps to reproduce:
Install notmuch-mutt and try `notmuch-mutt` at the command line. Then install `perl-mail-message` from Arch and try again.

Current VLC version (3.0.4-3.hyperbola1.backports1) fails to play DVB stream using a RTL2832 usb dongle.

I start the playlist like this :

vlc channels.conf

but it returns the following error :

cache_block stream error: cannot pre fill buffer

Also, it asks the user to be in “video” group to access DVB device, this was not needed before with Hyperbola 0.2.9. User being in “wheel” was enough.
Anyway, even after adding my user to video group, it still fails with “cache_block stream error: cannot pre fill buffer”

This is not an issue with my DVB adapter or driver. rtl2832 is correctly loaded. And I can play the channels.conf playlist just fine with “mpv” or “mplayer”.
Also, the channels.conf used works just fine with a more recent version of VLC on an other system (Manjaro) so something is broken with the current VLC used.

Maybe a package bump would fix the issue.

If you do a command line rc-status on urxvt terminal, the name of the column of services are hidden. You will only see the status columns. Example:

Runlevel: default
  started  ]
  started  ]
  started  ]
  started  ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
  started  ]
  started  ]
  started  ]d
Dynamic Runlevel: manual

When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:

* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...

These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password.
Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.

dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:

* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
Device foobar-pv is still in use                                              [ !! ]

Hello,

When mounting an NFS share, I get a warning about missing idmpad.conf

rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...

Debian includes a default config file for idmap :

[General]

Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain

[Mapping]

Nobody-User = nobody
Nobody-Group = nogroup

Description:

I saw errors in logs because fail2ban couldn’t find /usr/bin/sendmail, and discovered this:

[/etc/fail2ban] [0]
$ grep /usr/bin/sendmail */*
action.d/sendmail-buffered.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                 Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-geoip-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipjailmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-matches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>

Please, also check for other binaries with wrong locations

As of now, the solution is as simple as removing this line → https://git.hyperbola.info:50100/packages/community.git/tree/fail2ban/PKGBUILD#n79

Additional info:
* fail2ban-0.9.6-2.hyperbola3

• OS name and version: Hyperbola GNU/Linux-libre 0.4
• Kernel name and version: Linux-libre 5.10.103-gnu1-1-lts
• Package name and version: yeahwm 0.3.5-2

The title says it above.

Using both methods to launch YeahWM with SLiM and xinit doesn't work as it keeps crashing over the segmentation fault.

Description:
The /usr/sbin directory in spamassassin has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/spamassassin/PKGBUILD#n88

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing spamassassin, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* spamassassin 3.4.2-1.hyperbola2

Description:
The /usr/sbin directory in postfix has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/postfix/PKGBUILD#n115

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing postfix, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* postfix-3.2.2-1.hyperbola6

Description:
The /etc/fail2ban/filter.d/dovecot.conf file has a failregex with the following:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user\s*$

and works with things like:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user

but with verbosity enabled in Dovecot, this output looks like this:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user (given password: password)

and in this case it doesn’t work, but it does if we fix the failregex if we replace it with:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user( \(given password: \S*\))?\s*$

with this new expression, it works with and without verbosity

And regarding postfix, to make it work correctly I “backported” some pieces from newest failregex:

/etc/fail2ban/postfixr-rbl.conf:

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: [45]54 [45]\.7\.1 Service unavailable; Client host \[\S+\] blocked using .* from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

/etc/fail2ban/postfix.conf: (second failregex)

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: 45[04] 4\.7\.1 Client host rejected: cannot find your (reverse )?hostname, (\[\S*\]); from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

I can create a patch if you want. Note that I haven’t tested all filters, some others may also need some rework

Additional info:
* fail2ban-0.9.6-2.hyperbola3

Description:

• needs OpenRC init script (bzr serve), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

• bzr 2.7.0-2

Note: needs a provide: bazaar

Steps to reproduce:

• none

Description:

• needs OpenRC init scripts (hg serve and chg server), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

• mercurial 4.2-1

Note: needs a provide: hg

Steps to reproduce:

• none

Hi guys, I have ever run into a Brother brand printer model DCPT500W[0], and I have seen that the source code for the drivers under GPLv3 license is available.

I also see that there is a file brother_dcpt500w_printer_en.ppd, which is important for cups, which is why it may be necessary to integrate it into the cups, as long as the drivers are Libre.

[0]:https://download.brother.com/welcome/dlf101963/dcpt500w_cupswrapper_GPL_source_3.0.2-0.tar.gz

Few other distros like Debian, NetBSD, and OpenBSD have some own customized login screens, while right here, the actual distro didn’t. I suggest you replacing them for the following paths on the list to come up next package release, which I have three files attached below there.

/etc/X11/xdm:

• Xresources
• Xsetup_0

/usr/share/xdm/pixmaps:

• hyperbola.xpm
• xorg{,-bw}.xpm (removed as unused)

Iosevka wins a poll about most beautiful fonts on reddit (/r/linux). This font is very similar than Droid Sans (Official Google Font) with many advantages:

1 - Has 5 types modes (lightest, light, normal, bold, super bold)
2 - Condensed and big sizes (perfect for visual impairments users)
3 - Very Legible on i3-wm, Sway, Conky bar
4 - OTF license (Freedom license)

Iosevka is already on AUR, but create a official package prevent bug or proprietary third parties apps (Yaourt, etc) be installed by beginners Hyperbola users.

Official Site:
https://github.com/be5invis/Iosevka

On AUR:
https://aur.archlinux.org/packages/ttf-iosevka

Description:

• Add an Asterisk package capable of working without a graphical user interface. It’s common on servers and embedded devices that requires only interfaces like network (eg. SSH) or serial port to handle services.

Additional info:

• based on asterisk 14.4.0-1

Steps to reproduce:

• none

https://aur.archlinux.org/packages/linux-mptcp/

Kernel Patch for 4.9 :
http://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch

Compile :
https://multipath-tcp.org/pmwiki.php/Users/DoItYourself

Description:
Hyperbola has the following SPF implementations:
* libspf2
* perl-mail-spf
* perl-mail-spf-query

However, none of them work out of the box with postfix. There’s postfix-policyd-spf-perl, which uses one the current perl implementations (perl-mail-spf), takes no time to build and all the dependencies are already satisfied with Hyperbola’s packages

Here I made a PKGBUILD that’s compliant with the packaging standards:

pkgname=postfix-policyd-spf-perl
pkgver=2.011
pkgrel=1
pkgdesc='Postfix SPF policy engine, written in Perl'
arch=(i686 x86_64)
url='https://launchpad.net/postfix-policyd-spf-perl/'
license=(GPL)
depends=(perl-mail-spf perl-netaddr-ip perl-sys-hostname-long)
source=("https://launchpad.net/postfix-policyd-spf-perl/trunk/${pkgver}/+download/${pkgname}-${pkgver}.tar.gz"{,.asc})
sha512sums=('22fc00bf74912056a67e937a460ac1fd878f1cb1a3bfa7b19bc5f1e6bc1c36d815dcf8c945e818d242ed5e72a6295bb0e1569446e06b09aefb2842993b8016ba'
            'SKIP')
validpgpkeys=(E7729BFFBE85400FEEEE23B178D7DEFB9AD59AF1) # Scott Kitterman

package() {
  cd "${pkgname}-${pkgver}"

  install -Dm755 "${pkgname}" "${pkgdir}/usr/libexec/postfix/${pkgname}"
  install -Dm644 CHANGES INSTALL README -t "${pkgdir}/usr/share/doc/${pkgname}"
  install -Dm644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}

in the other hand, to give users the possibility of having more options, we could add pypolicyd-spf (AUR), which depends in pyspf (AUR) and other packages that Hyperbola has. In fact, ArchWiki talks about this implementation, but this might not be relevant.

Could it be possible to add :

ttf-font-awesome

to the repo ?

https://www.parabola.nu/packages/community/any/ttf-font-awesome/ http://fontawesome.io/

Thanks

Could it be possible to add :

awesome-terminal-fonts

to the repo please ?

https://www.parabola.nu/packages/community/any/awesome-terminal-fonts/ https://github.com/gabrielelana/awesome-terminal-fonts

Thanks

These two options could be enabled :

Kernel hacking → [*] Filter access to /dev/mem
[*] Filter I/O access to /dev/mem

Security options → [*] Restrict unprivileged access to the kernel syslog

CVE-2018-20123 QEMU: pvrdma: memory leakage in device hotplug
https://www.openwall.com/lists/oss-security/2018/12/13/4

CVE-2018-16872 Qemu: usb-mtp: path traversal by host filesystem
manipulation in Media Transfer Protocol (MTP)
https://www.openwall.com/lists/oss-security/2018/12/13/11

Patches included at above URLs.