|
Packages | Any | Feature Request | Very Low | Medium | [minidlna] remove systemd file and add openrc support | Unconfirmed | |
Task Description
Description:
minidlna lacks openrc support and includes a systemd file
Additional info: none
Steps to reproduce:
$ sudo pacman -S minidlna $ cat /usr/lib/systemd/system/minidlna.service
|
|
Packages | Any | Feature Request | Medium | High | [supervisor] contains systemd unit file | In Progress | |
Task Description
The Arch version of “supervisor” from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the a global ruleset for INIT-freedom, systemd unit files removal is required and adding support for other init-systems (preferred OpenRC for now) to replace it.
|
|
Packages | Any | Feature Request | Defer | Low | [php-imagick] add package | Unconfirmed | |
Task Description
php-imagick is an optdepends for many PHP webapps like Nextcloud and Wordpress, would be good to have itin Hyperbola, Arch added it last year
|
|
Services | Mail Service Issue | Feature Request | Very Low | Low | Support RFC 3461: Delivery Status Notifications (DSNs) | Unconfirmed | |
Task Description
The RFC 3461 would allow Hyperbola email accounts to request the destination email providers to point out if an email was successfully delivered.
It might not cover all transport failures, but at least has a chance to know in advance whether the message was delivered, discarding the events that happen afterwards (be it to the main inbox or subject to filtering rules such as moving to other folder, marking as spam or deleted after receipt).
|
|
Packages | Any | Drop Request | Very Low | Medium | [hardening-wrapper] deprecated, not needed anymore | Unconfirmed | |
Task Description
According to : https://github.com/thestinger/hardening-wrapper-deprecated
Wrapper scripts for building hardened executables by default (deprecated, replaced by standard Arch Linux toolchain changes)
|
|
Packages | Any | Drop Request | Medium | Medium | [gksu] is replaced and has to be deleted from our pacma... | Researching | |
Task Description
Description: From the author’s webpage gksu has been replaced.
Additional info: * package version(s) : extra/gksu 2.0.2-5
http://www.nongnu.org/gksu/
|
|
Packages | Stable | Drop Request | Very Low | Critical | [osdbattery] Unmaintained and unsupportable | Unconfirmed | |
Task Description
osdbattery is (probably) useless and broken so Conky did compete because It is still unmaintained and unsupported over 14 years ago (last released version 1.4 on August 23, 2005), and should be removed per anti-abandonware rule at the packaging guidelines.
Also, the default config file contains non-libre/free Microsoft font Verdana as X11 font format property in font variable.
|
|
Services | PunBB Branding | Bug Report | High | High | Forum appearance bugs | In Progress | |
Task Description
Some forum display errors:
preview button with the orange border.
Error message when logging in gray color making it difficult to read
|
|
Packages | Stable | Bug Report | Medium | Medium | [virt-install] ERROR '_OsVariant' object has no attribu... | Requires Testing | |
Task Description
Trying to create a VM using virt-install (1.4.1-2.hyperbola2)
virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'
This error shows up : ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’
I can’t create the VM.
PS : Error is not present on Debian Stretch with virt-install 1.4.0-5
Thanks for your help.
|
|
Packages | Stable | Bug Report | Very Low | High | [ispell] require FHS | Requires Testing | |
Task Description
Description:
cant open /usr/local/lib/english.hash
Additional info:
Repository : extra
Name : ispell
Version : 3.3.02-7
Description : An interactive spell-checking program for Unix
Architecture : x86_64
URL : http://ficus-www.cs.ucla.edu/geoff/ispell.html
Licenses : BSD
Groups : None
Provides : None
Depends On : ncurses
Optional Deps : None
Conflicts With : None
Replaces : None
Download Size : 321.26 KiB
Installed Size : 1336.00 KiB
Packager : Evangelos Foutras <evangelos@foutrelis.com>
Build Date : Sun Sep 6 12:07:06 2015
Validated By : MD5 Sum SHA-256 Sum Signature
Steps to reproduce:
- Install package
|
|
Packages | Any | Bug Report | Low | High | [xfce4-power-manager] locking session issue | Requires Testing | |
Task Description
I probably should’ve mentioned this before, but if it is set to suspend when lid is closed, it should automatically lock. if the security option: lock screen with system is set to sleep is tweaked on it doesn’t lock always.
This is word for word what I wrote in the forums, but yeah... it is a problem say if someone wants to use your laptop without your permission and can do so.
But it is also a problem if you set it to lock instead because it is more prone to overheating when your not using it, and it doesn’t suspend quickly enough.
I have tried this many times and the same story can be told, again and again.
I think this issue should be considered high or critical merely because of the privacy risk if someone gets their hands on your laptop while its on. Even if you have been away... :/
I wonder if anyone else has this issue... well you guys will tell me I am sure. if critical doesn’t match what you think I am sure you will change it. ;)
|
|
Packages | Stable | Bug Report | Medium | Critical | [torsocks] which: no getcap | Requires Testing | |
Task Description
Current torsocks version is broken. It returns the following error when attempting to torify application :
which: no getcap
|
|
Packages | Any | Bug Report | Medium | High | [gstreamer] needed rebuild | In Progress | |
Task Description
(gst-plugin-scanner:17336): GStreamer-WARNING : Failed to load plugin ‘/usr/lib/gstreamer-1.0/libgstzbar.so’: libzbar.so.0: cannot open shared object file: No such file or directory (gst-plugin-scanner:17336): GStreamer-WARNING : Failed to load plugin ‘/usr/lib/gstreamer-1.0/libgstfluidsynthmidi.so’: libfluidsynth.so.1: cannot open shared object file: No such file or directory
Repositorio : extra Nombre : gstreamer Versión : 1.12.0-1 Descripción : GStreamer open-source multimedia framework core library Arquitectura : x86_64 URL : https://gstreamer.freedesktop.org/ Licencias : LGPL Grupos : Nada Provee : Nada Depende de : libxml2 glib2 libunwind libcap libelf Dependencias opcionales : Nada En conflicto con : Nada Remplaza a : Nada Tamaño de la descarga : 1897,45 KiB Tamaño de la instalación : 17241,00 KiB Encargado : Jan Alexander Steffens (heftig) jan.steffens@gmail.com Fecha de creación : jue 04 may 2017 14:13:05 -05 Validado por : Suma MD5 Suma SHA-256 Firma
|
|
Packages | Any | Bug Report | Defer | High | [texlive-most] cannot export LaTeX - input csr10' fail... | Deferred | |
Task Description
I was using GNU Emacs, and tried to export LaTeX file or make a PDF. It seems that texlive package is broken, some fonts are missing.
The group named texlive-most cannot be properly installed.
admin→ pacsearch texlive
extra/texlive-bibtexextra 2016.43765-1 (texlive-most)
TeX Live - Additional BibTeX styles and bibliography databases
extra/texlive-bin 2016.41290-12.hyperbola1 [installed]
TeX Live binaries (Hyperbola rebranded)
extra/texlive-core 2016.43757-1.hyperbola2 (texlive-most) [installed]
TeX Live core distribution, without nonfree add-on packages (Hyperbola rebranded)
extra/texlive-fontsextra 2016.43763-1.hyperbola2 (texlive-most) [installed]
TeX Live - all sorts of extra fonts, without nonfree add-on packages
extra/texlive-formatsextra 2016.41438-3 (texlive-most) [installed]
TeX Live - collection of extra TeX 'formats'
extra/texlive-games 2016.43415-1 (texlive-most)
TeX Live - Setups for typesetting various board games, including chess
extra/texlive-genericextra 2016.43605-1 (texlive-most) [installed]
TeX Live - mixed bag of generic macro packages and fonts
extra/texlive-htmlxml 2016.43769-1 (texlive-most)
TeX Live - Packages to convert LaTeX to XML/HTML, and typeset XML/SGML
extra/texlive-humanities 2016.43711-1 (texlive-most)
TeX Live - LaTeX packages for law, linguistics, social sciences, and humanities
extra/texlive-langchinese 2016.43669-1 (texlive-lang)
TeX Live - Fonts and macro packages to typeset Chinese texts
extra/texlive-langcjk 2014.0-1
TeX Live - CJK (Chinese, Japanese, Korean) metapackage
extra/texlive-langcyrillic 2016.43417-1 (texlive-lang)
TeX Live - Fonts and macro packages to typeset Cyrillic texts
extra/texlive-langextra 2016.43739-1 (texlive-lang)
TeX Live - Bundle of all extra language support
extra/texlive-langgreek 2016.43222-1 (texlive-lang)
TeX Live - Fonts and support for typesetting Greek
extra/texlive-langjapanese 2016.43741-1 (texlive-lang)
TeX Live - Fonts and macro packages to typeset Japanese texts
extra/texlive-langkorean 2016.43130-1 (texlive-lang)
TeX Live - Fonts and macro packages to typeset Korean texts
extra/texlive-latexextra 2016.43768-1.hyperbola2 (texlive-most) [installed]
TeX Live - Large collection of add-on packages for LaTeX, without nonfree add-on packages
extra/texlive-music 2016.43375-1 (texlive-most)
TeX Live - Music typesetting packages
extra/texlive-pictures 2016.43767-1 (texlive-most) [installed]
TeX Live - Packages for drawings graphics
extra/texlive-plainextra 2016.43137-1 (texlive-most) [installed]
TeX Live - A collection of add-on packages and macros for plain TeX
extra/texlive-pstricks 2016.43710-1 (texlive-most) [installed]
TeX Live - Additional PSTricks packages
extra/texlive-publishers 2016.43764-1 (texlive-most)
TeX Live - LaTeX classes and packages for specific publishers
extra/texlive-science 2016.43747-1 (texlive-most)
TeX Live - Typesetting for mathematics, natural and computer sciences
[~] admin→ sudo pacman -S texlive-most
:: There are 15 members in group texlive-most:
:: Repository extra
1) texlive-bibtexextra 2) texlive-core 3) texlive-fontsextra 4) texlive-formatsextra 5) texlive-games 6) texlive-genericextra
7) texlive-htmlxml 8) texlive-humanities 9) texlive-latexextra 10) texlive-music 11) texlive-pictures 12) texlive-plainextra
13) texlive-pstricks 14) texlive-publishers 15) texlive-science
Enter a selection (default=all):
warning: texlive-core-2016.43757-1.hyperbola2 is up to date -- reinstalling
warning: texlive-fontsextra-2016.43763-1.hyperbola2 is up to date -- reinstalling
warning: texlive-formatsextra-2016.41438-3 is up to date -- reinstalling
warning: texlive-genericextra-2016.43605-1 is up to date -- reinstalling
warning: texlive-latexextra-2016.43768-1.hyperbola2 is up to date -- reinstalling
warning: texlive-pictures-2016.43767-1 is up to date -- reinstalling
warning: texlive-plainextra-2016.43137-1 is up to date -- reinstalling
warning: texlive-pstricks-2016.43710-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Packages (15) texlive-bibtexextra-2016.43765-1 texlive-core-2016.43757-1.hyperbola2 texlive-fontsextra-2016.43763-1.hyperbola2
texlive-formatsextra-2016.41438-3 texlive-games-2016.43415-1 texlive-genericextra-2016.43605-1
texlive-htmlxml-2016.43769-1 texlive-humanities-2016.43711-1 texlive-latexextra-2016.43768-1.hyperbola2
texlive-music-2016.43375-1 texlive-pictures-2016.43767-1 texlive-plainextra-2016.43137-1 texlive-pstricks-2016.43710-1
texlive-publishers-2016.43764-1 texlive-science-2016.43747-1
Total Download Size: 27.66 MiB
Total Installed Size: 1300.90 MiB
Net Upgrade Size: 110.88 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages...
texlive-bibtexextra-2016.43765-1-any 1541.4 KiB 275K/s 00:06 [###############################################] 100%
texlive-games-2016.43415-1-any 416.5 KiB 356K/s 00:01 [###############################################] 100%
texlive-htmlxml-2016.43769-1-any 1197.6 KiB 300K/s 00:04 [###############################################] 100%
texlive-humanities-2016.43711-1-any 299.0 KiB 664K/s 00:00 [###############################################] 100%
texlive-music-2016.43375-1-any 12.2 MiB 398K/s 00:31 [###############################################] 100%
texlive-publishers-2016.43764-1-any 9.2 MiB 471K/s 00:20 [###############################################] 100%
texlive-science-2016.43747-1-any 2.9 MiB 376K/s 00:08 [###############################################] 100%
(15/15) checking keys in keyring [###############################################] 100%
(15/15) checking package integrity [###############################################] 100%
(15/15) loading package files [###############################################] 100%
(15/15) checking for file conflicts [###############################################] 100%
(15/15) checking available disk space [###############################################] 100%
:: Processing package changes...
( 1/15) reinstalling texlive-core [###############################################] 100%
>>> updmap custom entries should go into /etc/texmf/web2c/updmap-local.cfg
>>> fmtutil custom entries should go into /etc/texmf/web2c/fmtutil-local.cnf
( 2/15) installing texlive-bibtexextra [###############################################] 100%
( 3/15) reinstalling texlive-fontsextra [###############################################] 100%
( 4/15) reinstalling texlive-formatsextra [###############################################] 100%
( 5/15) installing texlive-games [###############################################] 100%
( 6/15) reinstalling texlive-genericextra [###############################################] 100%
( 7/15) installing texlive-htmlxml [###############################################] 100%
( 8/15) reinstalling texlive-latexextra [###############################################] 100%
( 9/15) installing texlive-humanities [###############################################] 100%
Optional dependencies for texlive-humanities
texlive-pictures: for package qtree [installed]
(10/15) installing texlive-music [###############################################] 100%
Optional dependencies for texlive-music
python2: for scripts from the lilyglyphs packages [installed]
(11/15) reinstalling texlive-pictures [###############################################] 100%
(12/15) reinstalling texlive-plainextra [###############################################] 100%
(13/15) reinstalling texlive-pstricks [###############################################] 100%
(14/15) installing texlive-publishers [###############################################] 100%
(15/15) installing texlive-science [###############################################] 100%
Optional dependencies for texlive-science
python2-pygments: for pygmentex
:: Running post-transaction hooks...
(1/3) Updating TeXLive filename database...
(2/3) Updating TeXLive format files...
kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf csr10
! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.
kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf ecrm1000
! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000
Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000
Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.
kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf ecrm1000
! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000
Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000
Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.
kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf csr10
! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.
kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)
kpathsea: Running mktexmf csr10
! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10
Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.
fmtutil [ERROR]: running `pdftex -ini -jobname=utf8mex -progname=utf8mex -enc *utf8mex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile pdfmex.ini for pdfmex/pdftex not found.
fmtutil [ERROR]: running `pdftex -ini -jobname=csplain -progname=csplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini -jobname=pdfjadetex -progname=pdfjadetex *pdfjadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini -jobname=jadetex -progname=jadetex *jadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile mex.ini for mex/pdftex not found.
fmtutil [ERROR]: running `xetex -ini -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini -jobname=pdfcsplain -progname=pdfcsplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `luatex -ini -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
error: command failed to execute correctly
(3/3) Updating TeXLive font maps...
[~]
a
|
|
Packages | Stable | Bug Report | Very Low | Low | Chemical uknown media types | Researching | |
Task Description
I do not know how to solve this. Some of packages is causing this problem. I do not know which one.
Description:
(4/4) Updating the MIME type database... Unknown media type in type ‘chemical/x-alchemy’ Unknown media type in type ‘chemical/x-cache’ Unknown media type in type ‘chemical/x-cactvs-ascii’ Unknown media type in type ‘chemical/x-cactvs-binary’ Unknown media type in type ‘chemical/x-cactvs-table’ Unknown media type in type ‘chemical/x-cdx’ Unknown media type in type ‘chemical/x-cdxml’ Unknown media type in type ‘chemical/x-chem3d’ Unknown media type in type ‘chemical/x-cif’ Unknown media type in type ‘chemical/x-cml’ Unknown media type in type ‘chemical/x-daylight-smiles’ Unknown media type in type ‘chemical/x-dmol’ Unknown media type in type ‘chemical/x-gamess-input’ Unknown media type in type ‘chemical/x-gamess-output’ Unknown media type in type ‘chemical/x-gaussian-input’ Unknown media type in type ‘chemical/x-gaussian-log’ Unknown media type in type ‘chemical/x-genbank’ Unknown media type in type ‘chemical/x-gulp’ Unknown media type in type ‘chemical/x-hin’ Unknown media type in type ‘chemical/x-inchi’ Unknown media type in type ‘chemical/x-inchi-xml’ Unknown media type in type ‘chemical/x-jcamp-dx’ Unknown media type in type ‘chemical/x-macromodel-input’ Unknown media type in type ‘chemical/x-mdl-molfile’ Unknown media type in type ‘chemical/x-mdl-rdfile’ Unknown media type in type ‘chemical/x-mdl-rxnfile’ Unknown media type in type ‘chemical/x-mdl-sdfile’ Unknown media type in type ‘chemical/x-mdl-tgf’ Unknown media type in type ‘chemical/x-mmcif’ Unknown media type in type ‘chemical/x-mol2’ Unknown media type in type ‘chemical/x-mopac-graph’ Unknown media type in type ‘chemical/x-mopac-input’ Unknown media type in type ‘chemical/x-mopac-out’ Unknown media type in type ‘chemical/x-msi-car’ Unknown media type in type ‘chemical/x-msi-hessian’ Unknown media type in type ‘chemical/x-msi-mdf’ Unknown media type in type ‘chemical/x-msi-msi’ Unknown media type in type ‘chemical/x-ncbi-asn1’ Unknown media type in type ‘chemical/x-ncbi-asn1-binary’ Unknown media type in type ‘chemical/x-ncbi-asn1-xml’ Unknown media type in type ‘chemical/x-pdb’ Unknown media type in type ‘chemical/x-shelx’ Unknown media type in type ‘chemical/x-vmd’ Unknown media type in type ‘chemical/x-xyz’ Unknown media type in type ‘all/all’ Unknown media type in type ‘all/allfiles’
|
|
Packages | Any | Bug Report | Medium | Medium | [rxvt-unicode] rc-status command print "bug" table | Researching | |
Task Description
If you do a command line rc-status on urxvt terminal, the name of the column of services are hidden. You will only see the status columns. Example:
Runlevel: default
started ]
started ]
started ]
started ]
started 00:36:20 (0) ]
started 00:36:20 (0) ]
started 00:36:20 (0) ]
started 00:36:20 (0) ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
started ]
started ]
started ]d
Dynamic Runlevel: manual
|
|
Packages | Stable | Bug Report | Very Low | Medium | [kodi-addons-visualization] addons don't work | Unconfirmed | |
Task Description
After installation, none of the addons is present in Kodi!
|
|
Packages | Stable | Bug Report | Medium | Medium | [libusb] error when mounting USB memories on virtual ma... | Researching | |
Task Description
## Bug ##
libusb: error [_get_usbfs_fd] libusb couldn’t open USB device /dev/bus/usb/003/003: permission denied libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.
Reference links: https://askubuntu.com/questions/526962/libusb-couldnt-open-usb-device-dev-bus-usb-002-006-permission-denied-libusb
|
|
Services | HyperWeb Issue | Bug Report | Very Low | Low | RSS needs fixing | Unconfirmed | |
Task Description
Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.
|
|
Packages | Any | Bug Report | Very Low | Low | [remmina] impossible to connect to RDP servers after re... | Unconfirmed | |
Task Description
remmina dev ask to inform package maintainer, here is the discussion:
https://github.com/FreeRDP/Remmina/issues/1513#issuecomment-373128671
Would be nice to update or add a patch if available
|
|
Packages | Stable | Bug Report | Very Low | Low | Mupen64plus acts buggy | Unconfirmed | |
Task Description
the screen moves back and forth from left to right randomly, no matter what I do, any games any adapters do not work.
I wanted to have some fun with some old games...
Has anyone used mupen64plus successfully on hyperbola 0.2? I cannot get it to work without being completely confusing for the reasons I have mentioned and also, the glaring of the screen. Which only happens with mupen64plus...
|
|
Packages | Stable | Bug Report | Very Low | Medium | [cowsay] perl-text-charwidth dependency missing | Unconfirmed | |
Task Description
cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency
Error message :
“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14. BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”
After installing perl-text-charwidth, it works fine.
|
|
Packages | Any | Bug Report | Low | Medium | [cryptsetup] when dmcrypt start, the "/" filesystem, m... | Assigned | |
Task Description
When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:
* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...
These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password. Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.
|
|
Packages | Any | Bug Report | Low | Medium | [cryptsetup] can't umount luks filesystem on reboot/shu... | Assigned | |
Task Description
dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:
* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
Device foobar-pv is still in use [ !! ]
|
|
Packages | Stable | Bug Report | Medium | Medium | [linux-libre-lts] [i915] Display freeze : hpd interrupt... | Deferred | |
Task Description
Hello,
I recently acquired a T400 Thinkpad with 1440×900 panel. On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.
Both Thinkpad are running the same Hyperbola installation :
Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf) Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message) video driver : modesetting DE : xfce4 with xfwm4
On the Thinkpad x200, everything works great, no issue to report.
On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :
hpd interrupt storm detected on connector hdmi-a-1
And the display (and sound) freezes for 10 seconds (sometimes more !)
As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.
Results :
With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo. With 4.16.8 : Issue is not present ! No more freeze !
I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series. Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.
Thanks for your help
|
|
Packages | Stable | Bug Report | Very Low | Medium | [nfs-utils] missing idmapd.conf | Unconfirmed | |
Task Description
Hello,
When mounting an NFS share, I get a warning about missing idmpad.conf
rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...
Debian includes a default config file for idmap :
[General]
Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain
[Mapping]
Nobody-User = nobody
Nobody-Group = nogroup
|
|
Packages | Testing | Bug Report | Medium | Medium | [emacs] crush after sway | Researching | |
Task Description
I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:
1. Run sway 2. Exit sway or killall sway 3. Try running emacs on console, there will be crush 4. log out, log in, and emacs will work on console again
Yet it should not crush.
|
|
Packages | Any | Bug Report | Very Low | Low | [gimp] [gegl] Module '/usr/lib/gegl-0.3/lens-correct.so... | Assigned | |
Task Description
admin→ gimp IMG_20170909_153350828.jpg GEGL-Message: Module ‘/usr/lib/gegl-0.3/lens-correct.so’ load error: liblensfun.so.1: cannot open shared object file: No such file or directory GEGL-Message: Module ‘/usr/lib/gegl-0.3/matting-levin.so’ load error: libumfpack.so.5: cannot open shared object file: No such file or directory
(gimp:12519): GLib-GObject-WARNING **: g_object_set_valist: object class ‘GeglConfig’ has no property named ‘cache-size’
Those are errors I get when running Gimp.
|
|
Packages | Any | Bug Report | Defer | Low | [texlive-most] Cannot remove from system | Deferred | |
Task Description
admin-> sudo pacman -R texlive-most
checking dependencies...
:: ghostscript optionally requires texlive-core: needed for dvipdf
:: inkscape optionally requires texlive-core: latex formulas
Packages (15) texlive-bibtexextra-2016.43765-1 texlive-core-2016.43757-1.hyperbola2 texlive-fontsextra-2016.43763-1.hyperbola2 texlive-formatsextra-2016.41438-3 texlive-games-2016.43415-1
texlive-genericextra-2016.43605-1 texlive-htmlxml-2016.43769-1 texlive-humanities-2016.43711-1 texlive-latexextra-2016.43768-1.hyperbola2 texlive-music-2016.43375-1
texlive-pictures-2016.43767-1 texlive-plainextra-2016.43137-1 texlive-pstricks-2016.43710-1 texlive-publishers-2016.43764-1 texlive-science-2016.43747-1
Total Removed Size: 1300.90 MiB
:: Do you want to remove these packages? [Y/n] y
:: Processing package changes...
( 1/15) removing texlive-science [######################################################################] 100%
( 2/15) removing texlive-publishers [######################################################################] 100%
( 3/15) removing texlive-pstricks [######################################################################] 100%
( 4/15) removing texlive-plainextra [######################################################################] 100%
( 5/15) removing texlive-pictures [######################################################################] 100%
( 6/15) removing texlive-music [######################################################################] 100%
( 7/15) removing texlive-humanities [######################################################################] 100%
( 8/15) removing texlive-latexextra [######################################################################] 100%
( 9/15) removing texlive-htmlxml [######################################################################] 100%
(10/15) removing texlive-genericextra [######################################################################] 100%
(11/15) removing texlive-games [######################################################################] 100%
(12/15) removing texlive-formatsextra [######################################################################] 100%
(13/15) removing texlive-fontsextra [######################################################################] 100%
(14/15) removing texlive-bibtexextra [######################################################################] 100%
(15/15) removing texlive-core [######################################################################] 100%
warning: /etc/texmf/web2c/fmtutil.cnf saved as /etc/texmf/web2c/fmtutil.cnf.pacsave
:: Running post-transaction hooks...
(1/3) Updating TeXLive filename database...
warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
/usr/share/libalpm/scripts/mktexlsr: line 4: /usr/bin/mtxrun: No such file or directory
(2/3) Updating TeXLive format files...
cp: cannot stat 'usr/share/texmf-dist/web2c/fmtutil-hdr.cnf': No such file or directory
cat: 'var/lib/texmf/arch/installedpkgs/*.fmts': No such file or directory
/usr/share/libalpm/scripts/texlive-fmtutil: line 18: /usr/bin/fmtutil-sys: No such file or directory
error: command failed to execute correctly
(3/3) Updating TeXLive font maps...
cp: cannot stat 'usr/share/texmf-dist/web2c/updmap-hdr.cfg': No such file or directory
cat: 'var/lib/texmf/arch/installedpkgs/*.maps': No such file or directory
/usr/share/libalpm/scripts/texlive-updmap: line 12: /usr/bin/updmap-sys: No such file or directory
error: command failed to execute correctly
[~]
|
|
Packages | Any | Bug Report | Very Low | High | Desite "noauto" specified in /etc/fstab all devices get... | Unconfirmed | |
Task Description
Description:
I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.
Who can help me, not to mount a device during boot?
|
|
Packages | Stable | Bug Report | Very Low | Very Low | Gajim "Unable to run gpg - it may not be available" | Assigned | |
Task Description
Description:
Gajim XMPP Client wont start after installing python2-gnupg.
Additional info: * package version(s)
community/python2-gnupg 0.4.0-2
extra/gajim 0.16.8-1.hyperbola2
* config and/or log files etc.
/usr/lib/python2.7/site-packages/gajim/common/gajim.py
Steps to reproduce:
With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:
07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available. Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
raise child_exception
OSError: [Errno 2] No such file or directory Traceback (most recent call last):
File "gajim.py", line 513, in <module>
interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
raise OSError(msg)
OSError: Unable to run gpg - it may not be available.
After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.
# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py 162:GPG_BINARY = ‘gpg1’
By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.
Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.
|
|
Packages | Stable | Bug Report | Very Low | High | java cacerts file is empty | Unconfirmed | |
Task Description
/etc/ssl/certs/java/cacerts has 0 entries, resulting in ssl handshake errors in java applications.
Package versions: * ca-certificates 20170307-1 * ca-certificates-utils 20170307-1
|
|
Packages | Any | Bug Report | Medium | Medium | [lxmusic]package needs rebuilding as it fails to run | In Progress | |
Task Description
Rebuilt version (using PKGBUILD from Arch) works fine. Same is true for lxmusic-gtk3 (which the PKGBUILD also builds).
https://git.archlinux.org/svntogit/community.git/tree/trunk?h=packages/lxmusic
|
|
Services | Wiki Page Issue | Bug Report | Very Low | High | HTML design on Wiki not readable | Unconfirmed | |
Task Description
The wiki pages look really too narrow and not readable on even half a screen of the laptop.
|
|
Packages | Stable | Bug Report | Very Low | Medium | PCManFM display different behavior | Unconfirmed | |
Task Description
Description:
The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted. I do have dbus, gvfs & ntfs-3g installed and active services.
Additional info: * package version(s) PCManFM 1.2.5 - using LibFM ver. 1.2.5
Steps to reproduce: Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.
|
|
Packages | Any | Bug Report | Low | Low | [usbutils] lsusb does not list device names | In Progress | |
Task Description
Description:
lsusb does not resolve device names from /var/lib/usbutils/usb.ids
The same thing as described here: https://unix.stackexchange.com/questions/220759/lsusb-doesnt-list-device-names
|
|
Packages | Any | Bug Report | Very Low | Medium | [mate-panel] country flags for keyboard layouts are mis... | Unconfirmed | |
Task Description
After enabling show-flags via dconf-editor in org.mate.peripherals-keyboard-xkb.indicator the flags don’t show up. The simple workaround is to copy flags you want into ~/.icons/flags (after creating the directory) from here
https://github.com/linuxmint/flags/tree/master/usr/share/iso-flag-png
and then to reboot.
It seems to be this bug:
https://askubuntu.com/questions/1059324/how-to-show-current-keyboard-layout-on-mate-panel-as-country-flag/1059325#1059325
|
|
Packages | Any | Bug Report | Very Low | Medium | [ffmpegthumbnailer] missing support for some media form... | Unconfirmed | |
Task Description
ffmpegthumbnailer does not support some media formats since they do not appear in its configuration file ffmpegthumbnailer.thumbnailer which can be found in /usr/share/thumbnailers/. By editing the file ffmpegthumbnailer.thumbnailer one can add thumbnail support for embedded art in audio formats such as flac and mp3 (using the -m flag) and thumbnail support for webp (a new image format which iceweasel-uxp and gthumb support). I’m attaching my edited file (I just added a few common audio formats and webp and added the -m flag and removed the -f flag).
|
|
Packages | Any | Bug Report | Very Low | Low | [zathura-pdf-poppler] unable to process apostrophes di... | Researching | |
Task Description
Description: Something is wrong with the latest version packaged in Hyperbola. zathura-pdf-poppler is unable to process apostrophes displayed in pdf bookmarks.
Steps to reproduce: Open any pdf file which has a summary included, then hit `Tab` to display the summary. Instead of apostrophes, zathura-pdf-poppler displays html entities while the output of zathura-pdf-mupdf is correct.
|
|
Packages | Any | Bug Report | Low | Low | [erlang-nox] uses "nox" suffix | In Progress | |
Task Description
Description:
Additional info: * package version(s)
* config and/or log files etc.
Steps to reproduce:
|
|
Packages | Any | Bug Report | Low | Low | [qbittorrent-nox] uses "nox" suffix | In Progress | |
Task Description
Description:
Additional info: * package version(s)
* config and/or log files etc.
Steps to reproduce:
|
|
Packages | Any | Bug Report | Very Low | High | [kdelibs4support] XDG_RUNTIME_DIR not set | Unconfirmed | |
Task Description
Description:
This bug only appears when logged in as root on terminal
# kf5-config --version
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Qt: 5.8.0
KDE Frameworks: 5.33.0
kf5-config: 1.0
Additional info:
* package version(s)
$ pacman -Si kdelibs4support
Repositorio : extra
Nombre : kdelibs4support
Versión : 5.33.0-1
Descripción : Porting aid from KDELibs4
Arquitectura : x86_64
URL : https://community.kde.org/Frameworks
Licencias : LGPL
Grupos : kf5-aids
Provee : Nada
Depende de : kunitconversion kitemmodels kemoticons kded kparts
Dependencias opcionales : Nada
En conflicto con : kde4support
Remplaza a : kde4support
Tamaño de la descarga : 3,03 MiB
Tamaño de la instalación : 17,36 MiB
Encargado : Felix Yan <felixonmars@archlinux.org>
Fecha de creación : jue 13 abr 2017 14:29:47 -05
Validado por : Suma MD5 Suma SHA-256 Firma
Steps to reproduce:
- Install KDE plasma
|
|
Packages | Any | Bug Report | Very Low | High | [blueman] org.freedesktop.DBus.Error.NameHasNoOwner | Unconfirmed | |
Task Description
Description:
org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name ‘org.bluez.obex’: no such name
Additional info: * package version(s)
$ pacman -Si blueman
Repositorio : community
Nombre : blueman
Versión : 2.0.4-3
Descripción : GTK+ Bluetooth Manager
Arquitectura : x86_64
URL : https://github.com/blueman-project/blueman
Licencias : GPL
Grupos : Nada
Provee : Nada
Depende de : bluez bluez-libs gtk3 libnotify python-cairo python-dbus
python-gobject
Dependencias opcionales : dnsmasq: Network Access Point (NAP) support
networkmanager: Dial Up Networking (DUN) and Personal Area
Networking (PAN) support
pulseaudio-bluetooth: audio devices support
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 1814,18 KiB
Tamaño de la instalación : 5345,00 KiB
Encargado : Felix Yan <felixonmars@archlinux.org>
Fecha de creación : dom 25 dic 2016 12:00:42 -05
Validado por : Suma MD5 Suma SHA-256 Firma
* config and/or log files etc.
(blueman-applet | ccze -A): - https://paste.debian.net/plain/1049476
(pkgfile -l blueman): - https://paste.debian.net/plain/1049477
Steps to reproduce:
- Install blueman
|
|
Packages | Stable | Bug Report | Low | Medium | Garbled display with xfce4-terminal (terminfo) | Unconfirmed | |
Task Description
A very nasty bug I wasn’t able to find an answer to. I compiled stuff (buildroot) using menuconfig, the menu display was fine in xfce4-terminal (See screenshot #1) I restarted the config a few days later with the same command :
$ make menuconfig
and this time the display was messed up (See screenshot #2)
After investigation, I noticed a directory (filled with stuff) have been created in my home folder :
.terminfo
I don’t know why. But anyway, if I delete it, then the display is ok again. I noticed that if I use good old xterm terminal, then the display is fine even if the .terminfo directory is present. (it uses “xterm” instead of xterm-256color)
But, with xfce4-terminal (and others, I tried with gnome-terminal, sakura..), the display is messed up if the .terminfo directory is present in my home folder.
I also noticed that if I run the command in a screen session, the issue is not present.
(I open xfce4-terminal)
$ screen
$ printenv TERM
screen.xterm-256color
$ make menuconfig (or htop, or other program using ncurses)
= display ok
but with default :
(I open xfce4-terminal)
$ printenv TERM
xterm-256color
make menuconfig (or htop, or other program using ncurses)
= display messed up if .terminfo directory is present
So I have no idea why this .terminfo directory is generated. What could trigger its generation ? Is that an issue with ncurses or something else ?
Thanks for your help
|
|
Packages | Any | Bug Report | Low | Low | [crystal] error build Invidious | Researching | |
Task Description
Description:
crystal build src/invidious.cr –release
Error in src/invidious.cr:19: while requiring "kemal"
require "kemal"
^
in lib/kemal/src/kemal.cr:4: while requiring "./kemal/*"
require "./kemal/*"
^
in lib/kemal/src/kemal/config.cr:26: expanding macro
property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
^~~~~~~~
in lib/kemal/src/kemal/config.cr:26: expanding macro
property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
^
in macro 'property' expanded macro: macro_48177600:567, line 4:
1.
2.
3.
> 4. @static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
5.
6. def static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
7. @static_headers
8. end
9.
10. def static_headers=(@static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil)
11. end
12.
13.
14.
15.
undefined constant File::Info
Additional info: * package version(s)
Crystal 0.22.0 (2017-04-22) LLVM 4.0.0
Steps to reproduce:
|
|
Packages | Any | Bug Report | Low | High | [kaccounts-integration] option to add NextCloud/OwnClou... | Unconfirmed | |
Task Description
Description:
Additional info: * package version(s)
* config and/or log files etc.
Steps to reproduce:
|
|
Packages | Any | Bug Report | Low | High | [kdenetwork-kopete] clicking to add an Jabber Account o... | Unconfirmed | |
Task Description
Description:
Additional info: * package version(s)
* config and/or log files etc.
Steps to reproduce:
|
|
Packages | Stable | Bug Report | Very Low | Low | GNOME cannot lock screen while using LightDM | Unconfirmed | |
Task Description
Description: Screen locking does not work in GNOME, either with keyboard shortcuts or from the menu, while using LightDM.
Additional info: * According to this thread[1] this bug has been patched in Ubuntu. Please consider applying this patch.[2]
Steps to reproduce: # pacman -S gnome lightdm lightdm-gtk-greeter # rc-update add lightdm default Reboot, log in to a GNOME session and attempt to lock screen.
[1] https://www.reddit.com/r/gnome/comments/9klvej/is_there_a_way_to_get_the_screen_to_lock_with/ [2] https://git.launchpad.net/~ubuntu-desktop/ubuntu/+source/gnome-shell/tree/debian/patches/ubuntu/lightdm-user-switching.patch
|
|
Packages | Stable | Bug Report | Very Low | Medium | Mouse curse become invisible from beginning in kde5 pla... | Unconfirmed | |
Task Description
Description: I install plasma and xorg to my Hyperbola GNU/Linux-libre in Arch-way. However, after reboot, everything is fine except mouse curse.
I attempt to reinstall plasma-desktop and reboot. But nothing changes.
In attachment, the mouse stop at backward, however it is invisible.
Additional info: * package version(s) plasma-desktop == 5.9.5-1 xorg-server == 1.19.6-2.hyperbola1 sddm == 0.14.0-2.hyperbola6
* config and/or log files etc.
Steps to reproduce:
|
|
Packages | Stable | Bug Report | Very Low | High | [devede] xorriso unsupported option '-dvd-video' | Assigned | |
Task Description
Description:
Devede fails to convert transcoded videos to iso format with libburn-1.5.0.
Drive current: -outdev 'stdio:/home/heckyel/movie/movie.iso'
Media current: stdio file, overwriteable
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data, 334g free
xorriso : FAILURE : -as genisofs: Unsupported option '-dvd-video'
xorriso : NOTE : -return_with SORRY 32 triggered by problem severity FAI
Additional info:
$ pacman -Si devede
Repositorio : community
Nombre : devede
Versión : 4.8.8-1
Descripción : A program to create VideoDVDs and CDs
Arquitectura : any
URL : http://www.rastersoft.com/programas/devede.html
Licencias : GPL3
Grupos : Nada
Provee : Nada
Depende de : mencoder ffmpeg dvdauthor vcdimager cdrkit ttf-dejavu
gtk3 python-cairo python-gobject python-setuptools
Dependencias opcionales : mplayer
vlc
mpv
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 1640,88 KiB
Tamaño de la instalación : 3331,00 KiB
Encargado : Sergej Pupykin <pupykin.s+arch@gmail.com>
Fecha de creación : vie 10 feb 2017 05:06:37 -05
Validado por : Suma MD5 Suma SHA-256 Firma
Link’s code:
- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/mkisofs.py#L61
- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/genisoimage.py#L61
Steps to reproduce:
- Install devede - Create video DVD disc
|