All Projects

ProjectCategoryTask TypePrioritySeverity  ascSummaryStatusProgress
PackagesAnySecurity IssueVery LowMedium[patch] CVE-2018-6951 - NULL pointer DoSAssigned
0%
Task Description

An issue was discovered in GNU patch through 2.7.6. There is a segmentation fault, associated with a NULL pointer dereference, leading to a denial of service in the intuit_diff_type function in pch.c, aka a “mangled rename” issue.

https://security-tracker.debian.org/tracker/CVE-2018-6951

PackagesAnySecurity IssueVery LowMedium[qemu] Multiple CVEUnconfirmed
0%
Task Description

CVE-2018-20123 QEMU: pvrdma: memory leakage in device hotplug
https://www.openwall.com/lists/oss-security/2018/12/13/4

CVE-2018-16872 Qemu: usb-mtp: path traversal by host filesystem
manipulation in Media Transfer Protocol (MTP)
https://www.openwall.com/lists/oss-security/2018/12/13/11

Patches included at above URLs.

PackagesAnyImplementation RequestVery LowMedium[purple-matrix] Please add packageUnconfirmed
0%
Task Description

Package is a libpurple plugin for the Matrix protocol which is consistent with Hyperbola’s social contract as Matrix is a federated protocol.

Source code can be found here licensed under GPLv2:

https://github.com/matrix-org/purple-matrix

PKGBUILD for git version is available here (last stable release is from two years ago so git version is probably the best version to use):

https://aur.archlinux.org/packages/purple-matrix-git/

PackagesAnyImplementation RequestVery LowMedium[i3-gaps] Add new packageUnconfirmed
0%
Task Description

Description: i3-gaps is a fork of i3 that properly implements gaps.

Additional info:
It is implemented in the AUR https://www.archlinux.org/packages/community/x86_64/i3-gaps/ and it’s source is available on github: https://github.com/Airblader/i3

PackagesAnyBackport RequestVery LowMediumRandom Agent Spoofer for IceapeUnconfirmed
0%
Task Description

random_agent_spoofer-0.9.5.8.4-fx.xpi is the version I desire, can you implement it?

PackagesAnyBackport RequestVery LowMediumGreasemonkey For IceapeUnconfirmed
0%
Task Description

greasemonkey-3.31.4 version desired. I would love to see it implemented for Iceape

PackagesAnyImplementation RequestVery LowMediumPrivacy Settings for IceapeUnconfirmed
0%
Task Description

This addon works for any firefox based browser but not seamonkey based or this.

I wondered if you could implement the iceweasel one for Iceape.

PackagesAnyBackport RequestVery LowMediumNo Resource Url Leak for IceapeUnconfirmed
0%
Task Description

1.2.4 version would be nice for Iceape.

PackagesAnyFreedom IssueVery LowMedium[mongodb] needs OpenRC init scriptUnconfirmed
0%
Task Description

Description:
needs OpenRC init script

Additional info:
* mongodb-3.4.3-1

PackagesTestingImplementation RequestMediumMediumlinux-libre-lts-hypersec: New package with extra securi...Deferred
0%
Task Description

Description: Per a user request and to better secure the kernel, we can embed the cryptsetup and ciphers in the kernel. This would mean rather than exposed modules, they are built-in to the kernel and ready to use even without an intramfs.

To be embedded: ciphers aes, twofish, serpent; sha256, sha512 - and the necessary modules (don’t forget the block modes xts, lvm and cryptsetup ...)

Additionally, we could include USB Guard and any other features that meet our social contract and security outlook.

PackagesStableBug ReportVery LowMediumMouse curse become invisible from beginning in kde5 pla...Unconfirmed
0%
Task Description

Description:
I install plasma and xorg to my Hyperbola GNU/Linux-libre in Arch-way.
However, after reboot, everything is fine except mouse curse.

I attempt to reinstall plasma-desktop and reboot. But nothing changes.

In attachment, the mouse stop at backward, however it is invisible.

Additional info:
* package version(s)
plasma-desktop == 5.9.5-1
xorg-server == 1.19.6-2.hyperbola1
sddm == 0.14.0-2.hyperbola6

* config and/or log files etc.

Steps to reproduce:

PackagesStableReplace RequestVery LowMediumPackage ossp has got systemd dependenciesUnconfirmed
0%
Task Description

Description: Concurrent package ossp in version 1.3.2-15 has got dependencies to systemd, which is contradicting the whole distribution and the used INIT-system. Therefore my request to port this to OpenRC!

Additional info:
* package version(s) 1.3.2-15

PackagesAnyImplementation RequestVery LowMedium[midori] please re-add new releasesUnconfirmed
0%
Task Description

The security issues regarding the package which led to the package’s removal from Hyperbola (old WebKit and Vala dependency) have apparently been resolved in recent releases, see the new comment in this bug report and the latest PKGBUILD in Arch’s repo.

https://launchpad.net/bugs/1698483

https://www.archlinux.org/packages/community/x86_64/midori/

PackagesStableBug ReportVery LowMedium [kodi] "The Movie Database" scraper doesn't workUnconfirmed
0%
Task Description

With kodi 17.1-2.hyperbola1 “The Movie Database” scraper doesn’t work. The error message is :

"Unable to connect to remote server"
PackagesStableUpdate RequestVery LowMedium[cantarell-fonts] update package version to 0.111Unconfirmed
0%
Task Description

Prior version 0.0.25 and below are outdated.

Since version 0.100 and later, there are some changes being redesigned from scratch, added three new weights (including extra bold, light and thin) but not italic or oblique styles, AppStream metadata translations from contributors, and more.

See the version history releases for more details: https://gitlab.gnome.org/GNOME/cantarell-fonts/raw/master/NEWS

PackagesAnyFeature RequestVery LowMediumAdd Draco DesktopUnconfirmed
0%
Task Description

https://github.com/rodlie/draco

its like Lumina Desktop, but its more lightweight and better for Gnu/Linux

:)

Matter of fact, I hope its okay, but the latest stable build, of Draco is vastly better than Lumina. And for this reason I wanted to know if you could put higher priority on this than the Lumina Desktop request.

PackagesAnyBug ReportVery LowMedium[ rtkit ] contains systemd unit filesUnconfirmed
0%
Task Description

Description:

The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:

pacman -Ql rtkit
rtkit /etc/
rtkit /etc/dbus-1/
rtkit /etc/dbus-1/system.d/
rtkit /etc/dbus-1/system.d/org.freedesktop.RealtimeKit1.conf
rtkit /usr/
rtkit /usr/bin/
rtkit /usr/bin/rtkitctl
rtkit /usr/lib/
rtkit /usr/lib/rtkit/
rtkit /usr/lib/rtkit/rtkit-daemon
rtkit /usr/share/
rtkit /usr/share/dbus-1/
rtkit /usr/share/dbus-1/interfaces/
rtkit /usr/share/dbus-1/interfaces/org.freedesktop.RealtimeKit1.xml
rtkit /usr/share/dbus-1/system-services/
rtkit /usr/share/dbus-1/system-services/org.freedesktop.RealtimeKit1.service
rtkit /usr/share/licenses/
rtkit /usr/share/licenses/rtkit/
rtkit /usr/share/licenses/rtkit/COPYING
rtkit /usr/share/licenses/rtkit/LICENSE
rtkit /usr/share/man/
rtkit /usr/share/man/man8/
rtkit /usr/share/man/man8/rtkitctl.8.gz
rtkit /usr/share/polkit-1/
rtkit /usr/share/polkit-1/actions/
rtkit /usr/share/polkit-1/actions/org.freedesktop.RealtimeKit1.policy

* package version(s)
rtkit 0.11-1.hyperbola1

* config and/or log files etc.

Jun 26 10:41:50 gnu mtp-probe: checking bus 1, device 8: “/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4”
Jun 26 10:41:50 gnu mtp-probe: bus: 1, device: 8 was not an MTP device
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu pulseaudio[4401]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files

Steps to reproduce:

PackagesAnyFeature RequestVery LowMedium[minidlna] remove systemd file and add openrc supportUnconfirmed
0%
Task Description

Description:

minidlna lacks openrc support and includes a systemd file

Additional info: none

Steps to reproduce:

$ sudo pacman -S minidlna
$ cat /usr/lib/systemd/system/minidlna.service

PackagesAnyBug ReportVery LowMedium[clamtk] Gtk-WARNING **: Impossible to find the theme e...Assigned
0%
Task Description

Additional info:
* package version

Repositorio               : community
Nombre                    : clamtk
Versión                   : 5.24-1
Descripción               : Easy to use, light-weight, on-demand virus scanner for Linux
                            systems
Arquitectura              : any
URL                       : https://dave-theunsub.github.io/clamtk/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : clamav  perl  gtk2-perl  perl-locale-gettext  perl-libwww
                            perl-http-message  perl-lwp-protocol-https  perl-text-csv
                            perl-json  python  zenity  desktop-file-utils  gnome-icon-theme
                            cron
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 179,90 KiB
Tamaño de la instalación  : 1378,00 KiB
Encargado                 : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación         : sáb 19 nov 2016 20:25:20 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ clamtk
Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.

Steps to reproduce:

* Install clamtk in all version

PackagesAnyImplementation RequestVery LowMedium[nnn] package requestUnconfirmed
0%
Task Description

This is a request to package nnn - a full-featured terminal file manager for low-end devices and the regular desktop.

nnn is available on Debian, Ubuntu (and family), Fedora, OpenSUSE and Arch Linux.

Homepage: https://github.com/jarun/nnn License: BSD 2-Clause

I would highly appreciate if nnn can be added to the repository.

PackagesStableBug ReportVery LowMedium[arm-unknown-linux-gnueabi-gcc] not working; needs prop...Unconfirmed
0%
Task Description

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don't think "steps to reproduce" to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

PackagesAnyImplementation RequestVery LowMediumSupport of MPTCP (Multipath TCP) on HyperbolaUnconfirmed
0%
Task Description

Patch for 4.9 : https://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch

AUR : https://aur.archlinux.org/packages/linux-mptcp/

PackagesTestingReplace RequestVery LowMedium replace request: NetworkManager with wpa_cuteUnconfirmed
0%
Task Description

https://github.com/loh-tar/wpa-cute/releases

I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.

I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)

or 2019 january. :)

WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:

https://wiki.archlinux.org/index.php/Wpa_supplicant:

Password-related problems

wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.

In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:

# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf

In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed.
Problems with eduroam and other MSCHAPv2 connections

This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.

but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.

It says it cannot get the status of wpa_supplicant when I load it.

This could be an issue if you get rid of NetworkManager for some users.

So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)

PackagesAnyBug ReportVery LowMedium[slim] login screen not displaying correctlyAssigned
0%
Task Description

It worked fine on the previous version of Hyperbola. The word user/username does not show up. A workaround is to wait 10 seconds and enter the username and click enter - then it will switch correctly to the password screen (otherwise you need to enter the username and password at least twice in order to successfully login).

PackagesAnyBug ReportVery LowMedium[openrc] cannot load fuse at bootUnconfirmed
0%
Task Description

I added
<quote>modules=”fs-fuse”</quote>
to /etc/conf.d/modules (and also “fuse” instead).

I looked in /var/log/rc.log and I see this line

<quote>modprobe: FATAL: Module fs-fusetun not found in directory /lib/modules/4.9.194-gnu-1-lts</quote>

It looks like modprobe added “tun” to the filename which prevents loading the module.

PackagesAnyBug ReportVery LowMedium[exfat-utils] filesystem can only be mounted manuallyUnconfirmed
0%
Task Description

One can mount exfat by running commands such as “sudo modprobe fuse” and “sudo mount.exfat /dev/sdc1 /mnt/storage” but it is inconvenient.

Also, loading fuse at startup is problematic - see here:

https://issues.hyperbola.info/index.php?do=details&task_id=1433

PackagesAnyUpdate RequestVery LowMedium[lmms] update package version to 1.2.0Unconfirmed
0%
Task Description

In the latest version, it has many more changes with new and improvement features, and fixes function issues since released as preview stage in every eight times per three years ago[1]. And also it is possible to rebuild package with sndio.

[1]: https://github.com/LMMS/lmms/releases/ (see all sections below from 1.2.0-RC1 to 1.2.0 in the version history releases)

PackagesStableBug ReportVery LowMedium[sshguard] violates Hyperbola packaging standardsUnconfirmed
0%
Task Description

Description:
The sshguard package should have its /usr/bin/sshguard executable in /usr/sbin, has systemd service files and no OpenRC init script

Additional info:
* sshguard-2.0.0-4
* when I run `sshguard`:

# sshguard
/usr/bin/sshguard: line 87: /usr/bin/journalctl: No such file or directory

* default /etc/sshguard.conf

LOGREADER="LANG=C /usr/bin/journalctl -afb -p info -n1 -t sshd -o cat"
BLACKLIST_FILE=120:/var/db/sshguard/blacklist.db
BACKEND="/usr/lib/sshguard/sshg-fw-iptables"

(commenting the first line temporally solves the issue)

PackagesStableBug ReportVery LowMedium[fail2ban] remove systemd integrationUnconfirmed
0%
Task Description

Description:
This package has a strong systemd integration. It has a systemd backend to get files modifications:

(from /etc/fail2ban/jail.conf)

# systemd:   uses systemd python library to access the systemd journal.
#              Specifying "logpath" is not valid for this backend.
#              See "journalmatch" in the jails associated filter config

and many files at /etc/fail2ban/filter.d have systemd stuff

[/etc/fail2ban/filter.d] [0]
$ grep -i systemd *
dovecot.conf:#journalmatch = _SYSTEMD_UNIT=dovecot.service
ejabberd-auth.conf:# Notes.:  systemd journalctl style match filter for journal based backend
postfix.conf:journalmatch = _SYSTEMD_UNIT=postfix.service
postfix-sasl.conf:#journalmatch = _SYSTEMD_UNIT=postfix.service
pure-ftpd.conf:journalmatch = _SYSTEMD_UNIT=pure-ftpd.service + _COMM=pure-ftpd
recidive.conf:journalmatch = _SYSTEMD_UNIT=fail2ban.service PRIORITY=5
sshd.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
sshd-ddos.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd

Additional info:
* fail2ban-0.9.6-2.hyperbola3

PackagesStableBug ReportVery LowMedium[fail2ban] uses old /usr/bin/sendmail location when it ...Unconfirmed
0%
Task Description

Description:

I saw errors in logs because fail2ban couldn’t find /usr/bin/sendmail, and discovered this:

[/etc/fail2ban] [0]
$ grep /usr/bin/sendmail */*
action.d/sendmail-buffered.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                 Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-geoip-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipjailmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-matches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>

Please, also check for other binaries with wrong locations

As of now, the solution is as simple as removing this line → https://git.hyperbola.info:50100/packages/community.git/tree/fail2ban/PKGBUILD#n79

Additional info:
* fail2ban-0.9.6-2.hyperbola3

PackagesAnyImplementation RequestVery LowMedium[SPF][postfix] implement pypolicyd-spf and postfix-poli...Unconfirmed
0%
Task Description

Description:
Hyperbola has the following SPF implementations:
* libspf2
* perl-mail-spf
* perl-mail-spf-query

However, none of them work out of the box with postfix. There’s postfix-policyd-spf-perl, which uses one the current perl implementations (perl-mail-spf), takes no time to build and all the dependencies are already satisfied with Hyperbola’s packages

Here I made a PKGBUILD that’s compliant with the packaging standards:

pkgname=postfix-policyd-spf-perl
pkgver=2.011
pkgrel=1
pkgdesc='Postfix SPF policy engine, written in Perl'
arch=(i686 x86_64)
url='https://launchpad.net/postfix-policyd-spf-perl/'
license=(GPL)
depends=(perl-mail-spf perl-netaddr-ip perl-sys-hostname-long)
source=("https://launchpad.net/postfix-policyd-spf-perl/trunk/${pkgver}/+download/${pkgname}-${pkgver}.tar.gz"{,.asc})
sha512sums=('22fc00bf74912056a67e937a460ac1fd878f1cb1a3bfa7b19bc5f1e6bc1c36d815dcf8c945e818d242ed5e72a6295bb0e1569446e06b09aefb2842993b8016ba'
            'SKIP')
validpgpkeys=(E7729BFFBE85400FEEEE23B178D7DEFB9AD59AF1) # Scott Kitterman

package() {
  cd "${pkgname}-${pkgver}"

  install -Dm755 "${pkgname}" "${pkgdir}/usr/libexec/postfix/${pkgname}"
  install -Dm644 CHANGES INSTALL README -t "${pkgdir}/usr/share/doc/${pkgname}"
  install -Dm644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}

in the other hand, to give users the possibility of having more options, we could add pypolicyd-spf (AUR), which depends in pyspf (AUR) and other packages that Hyperbola has. In fact, ArchWiki talks about this implementation, but this might not be relevant.

PackagesStableBug ReportVery LowMedium[postgrey] has systemd service and no OpenRC init scrip...Unconfirmed
0%
Task Description

Description:
The title says everything

Also, it doesn’t follow the FHS (/usr/bin/postgrey should be in /usr/sbin)

Additional info:
* postgrey-1.37-1

PackagesStableFreedom IssueVery LowMedium[xfe] Replace with Hyperbola Iceweasel-UXP for HTML and...Unconfirmed
0%
Task Description

Two formats (including HTML and PHP) are provided to run semi-libre/free web browser Mozilla Firefox in the original code base, but it currently got blacklisted due to numerous branding, security and privacy issues, and replaced by the Hyperbola Iceweasel-UXP. To replace existing strings at the web section in xferc.in:

html = "iceweasel-uxp,iceweasel-uxp,<txteditor>;Hyper Text;html_32x32.png;html_16x16.png;;"
htm = "iceweasel-uxp,iceweasel-uxp,<txteditor>;Hyper Text;html_32x32.png;html_16x16.png;;"
php = "iceweasel-uxp,iceweasel-uxp,<txteditor>;PHP Source;html_32x32.png;html_16x16.png;;"
PackagesStableImplementation RequestVery LowMedium[gcc] Renew to version 8 or 9, including multilibDeferred
0%
Task Description

As even the support for GCC 7 is now ending with the release of version 7.5 (https://gcc.gnu.org/ml/gcc/2019-11/msg00099.html) I’d like to propose a renewal of the building-stack - which I think is also needed in time. Also a renewal of the glibc would be good at all!

PackagesAnySecurity IssueVery LowMediumDownload debian-fixes instead of relying on external so...Unconfirmed
0%
Task Description

It happened already with minetest and again with prosody: When trying to build own packages with makepkg there are patches downloaded from the Debian-project. But the given HTTP(S)-sources are no longer available, concrete example within prosody to be found: https://deb.debian.org/debian/pool/main/p/prosody/prosody_0.10.2-1~bpo9+1.debian.tar.xz (not available)

Please don’t rely on those external sources when creating PKGBUILD-files or just give users the possibility for a secure and granted download. Therefore I cannot build prosody on my own now!

PackagesStableBug ReportVery LowMediumlinphonec error (cli version)Unconfirmed
0%
Task Description

Description:
linphonec is unusable because a error produce a continuous log

Additional info:
linphone 3.11.1-1.hyperbola1

Steps to reproduce:
linphonec

Log:
linphonec> 2019-12-15 19:25:58:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:03:012 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:08:018 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:13:013 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:18:016 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:23:014 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:28:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:33:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:38:012 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:43:015 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:48:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:53:010 ortp-error-Error in connect: Network is unreachable

PackagesAnyImplementation RequestVery LowMedium[chdkptp] please add package to control Canon camerasUnconfirmed
0%
Task Description

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. chdkptp requires root privileges to connect to a camera.

PackagesStableSecurity IssueVery LowMedium[git] Multiple CVEsUnconfirmed
0%
Task Description

CVE-2020-5260 has been fixed very recently in Debian, so I thought I would apply this patch. However, I found out that security patches have not been applied for quite a while (I could account for at least 6 CVEs).

Considering that the version in Debian stretch (2.11.0) is the nearest version with security patches released by Debian and that git project oldest supported version is 2.17, I have used patches from Debian stretch to apply on 2.12.2 currently in Milky Way.

But I have the following error on check():

 |  *** prove ***
 |
 |  Test Summary Report
 |  -------------------
 |  t5570-git-daemon.sh                              (Wstat: 256 Tests: 20 Failed: 10)
 |    Failed tests:  3-7, 15-19
 |    Non-zero exit status: 1
 |  t5811-proto-disable-git.sh                       (Wstat: 256 Tests: 26 Failed: 16)
 |    Failed tests:  2-6, 9-11, 15-19, 21-23
 |    Non-zero exit status: 1
 |  Files=769, Tests=14137, 1101 wallclock secs ( 8.08 usr  1.12 sys + 144.48 cusr 63.42 csys = 217.10 CPU)
 |  Result: FAIL
 |  make[1]: *** [Makefile:45: prove] Error 1
 |  make[1]: Leaving directory '/build/git/src/git-2.12.2/t'
 |  make: *** [Makefile:2291: test] Error 2
 |  ==> ERROR: A failure occurred in check().
 |      Aborting...

This does not seem to be related to my change as the current version in Milky Way produces the same error (IOW the package currently in Milky Way is not rebuidable).

PackagesAnySecurity IssueVery LowMediummount.davfs: unknown file system davfs due to paths cha...Unconfirmed
0%
Task Description

This is same issue as on:
https://bugzilla.redhat.com/show_bug.cgi?id=1151273

The paths changed and trying to mount davfs file system defined in /etc/fstab fails with error: unknown file system davfs

To remedy, I made symlink in /sbin to mount.davfs

The transition of paths had to take that in account as many mounted remote disks failed after upgrade.

PackagesStableBug ReportVery LowMediumUntrsuted gpg keyUnconfirmed
0%
Task Description

Description:
There is an issue with Christian Rebischke key, i’ve tried to delete /etc/pacman.d/gnupg/ and repopulate it but it doesn’t fix the issue.

error: ascii: signature from “Christian Rebischke (Arch Linux Security Team-Member) Chris.Rebischke@archlinux.org” is unknown trust
File /var/cache/pacman/pkg/ascii-3.15-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).

Steps to reproduce:

sudo pacman -S ascii

PackagesStableUpdate RequestVery LowMedium[varnish] Missing init scriptUnconfirmed
0%
Task Description

Description:

Init script is missing for this package.

I think has some systemd dependecies.

/tmp/alpm_sYmHUS/.INSTALL: line 7: systemd-sysusers: command not found
error: command failed to execute correctly

package version: varnish-5.1.2-1

ServicesPunBB BrandingBug ReportHighHighForum appearance bugsIn Progress
100%
Task Description

Some forum display errors:

  1. preview button with the orange border.
  1. Error message when logging in gray color making it difficult to read
ServicesWiki Page IssueBug ReportVery LowHighHTML design on Wiki not readableUnconfirmed
0%
Task Description

The wiki pages look really too narrow and not readable on even half a screen of the laptop.

ServicesMail Service IssueSecurity IssueVery LowHighPlease "support" TLS 1.2 instead of requiring it for em...Unconfirmed
0%
Task Description

The requirement for TLS 1.2 in email effectively isolated us from internet, and yelling for change isn’t working even in communications with other free/libre system distributions and mailing lists related to free/libre software (both for software and for discussions related to the movement itself). :)

Many mailing lists at gnu.org, fsf.org, fsfla.org, libreplanet.org, and also in other free/libre system distributions aren’t accessible (e.g.: Trisquel).

PackagesStableUpdate RequestHighHigh[qt5] upgrade Qt project to the 5.6 LTS version, requir...Deferred
0%
Task Description

Cannot mix incompatible Qt library (version 0×50800) with this library (version 0×50904)
Aborted

./Nextcloud-2.3.3-x86_64.AppImage: /usr/lib/libQt5Core.so.5: version `Qt_5.9’ not found (required by /tmp/.mount_NextclpprMnG/usr/bin/../lib/libqt5keychain.so.1

These two packages are directly affected by an older qt5...

Could you update all the qt packages to the LTS version available?

PackagesAnyUpdate RequestMediumHighMake Knock patch for Linux-libre 4.14 LTSUnconfirmed
0%
Task Description

The Knock patches for linux-libre maintained by you at https://git.hyperbola.info:50100/kernels/knock.git/ have support up to linux-libre 4.13 only (and I think it didn’t work for it when I tried it, compilation failed) but from all of those supported versions, the newest maintained generation by the upstream is 4.9.x

However, since newer kernel generations might require reprogramming the patch, I want to request it only for the latest LTS generation which is 4.14. As you know, LTS software are supported for a long time, so it’s worth to make it for linux-libre 4.14.x

This might not be really important for Hyperbola in the short term, but you are the maintainers of the TCP Stealth implementation for Linux-libre and I and maybe other people would like to use it in their projects for newer versions.

Plus, it would be great since while 4.9 kernels can use the GRSec+Knock combination like linux-libre-lts-unofficial-grsec-knock, with support for 4.14 anyone would be able to use a combination of newer patches such as Linux-hardened+Knock (Linux-hardened supports 4.14 and 4.15 as of now) which is what I’d like to do.
https://github.com/copperhead/linux-hardened/releases

PackagesAnyBug ReportDeferHigh[texlive-most] cannot export LaTeX - input csr10' fail...Deferred
50%
Task Description

I was using GNU Emacs, and tried to export LaTeX file or make a PDF. It seems that texlive package is broken, some fonts are missing.

The group named texlive-most cannot be properly installed.

admin→ pacsearch texlive

extra/texlive-bibtexextra 2016.43765-1 (texlive-most)
    TeX Live - Additional BibTeX styles and bibliography databases
extra/texlive-bin 2016.41290-12.hyperbola1 [installed]
    TeX Live binaries (Hyperbola rebranded)
extra/texlive-core 2016.43757-1.hyperbola2 (texlive-most) [installed]
    TeX Live core distribution, without nonfree add-on packages (Hyperbola rebranded)
extra/texlive-fontsextra 2016.43763-1.hyperbola2 (texlive-most) [installed]
    TeX Live - all sorts of extra fonts, without nonfree add-on packages
extra/texlive-formatsextra 2016.41438-3 (texlive-most) [installed]
    TeX Live - collection of extra TeX 'formats'
extra/texlive-games 2016.43415-1 (texlive-most)
    TeX Live - Setups for typesetting various board games, including chess
extra/texlive-genericextra 2016.43605-1 (texlive-most) [installed]
    TeX Live - mixed bag of generic macro packages and fonts
extra/texlive-htmlxml 2016.43769-1 (texlive-most)
    TeX Live - Packages to convert LaTeX to XML/HTML, and typeset XML/SGML
extra/texlive-humanities 2016.43711-1 (texlive-most)
    TeX Live - LaTeX packages for law, linguistics, social sciences, and humanities
extra/texlive-langchinese 2016.43669-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Chinese texts
extra/texlive-langcjk 2014.0-1
    TeX Live - CJK (Chinese, Japanese, Korean) metapackage
extra/texlive-langcyrillic 2016.43417-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Cyrillic texts
extra/texlive-langextra 2016.43739-1 (texlive-lang)
    TeX Live - Bundle of all extra language support
extra/texlive-langgreek 2016.43222-1 (texlive-lang)
    TeX Live - Fonts and support for typesetting Greek
extra/texlive-langjapanese 2016.43741-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Japanese texts
extra/texlive-langkorean 2016.43130-1 (texlive-lang)
    TeX Live - Fonts and macro packages to typeset Korean texts
extra/texlive-latexextra 2016.43768-1.hyperbola2 (texlive-most) [installed]
    TeX Live - Large collection of add-on packages for LaTeX, without nonfree add-on packages
extra/texlive-music 2016.43375-1 (texlive-most)
    TeX Live - Music typesetting packages
extra/texlive-pictures 2016.43767-1 (texlive-most) [installed]
    TeX Live - Packages for drawings graphics
extra/texlive-plainextra 2016.43137-1 (texlive-most) [installed]
    TeX Live - A collection of add-on packages and macros for plain TeX
extra/texlive-pstricks 2016.43710-1 (texlive-most) [installed]
    TeX Live - Additional PSTricks packages
extra/texlive-publishers 2016.43764-1 (texlive-most)
    TeX Live - LaTeX classes and packages for specific publishers
extra/texlive-science 2016.43747-1 (texlive-most)
    TeX Live - Typesetting for mathematics, natural and computer sciences

[~]
admin→ sudo pacman -S texlive-most

:: There are 15 members in group texlive-most:
:: Repository extra
   1) texlive-bibtexextra  2) texlive-core  3) texlive-fontsextra  4) texlive-formatsextra  5) texlive-games  6) texlive-genericextra
   7) texlive-htmlxml  8) texlive-humanities  9) texlive-latexextra  10) texlive-music  11) texlive-pictures  12) texlive-plainextra
   13) texlive-pstricks  14) texlive-publishers  15) texlive-science

Enter a selection (default=all):
warning: texlive-core-2016.43757-1.hyperbola2 is up to date -- reinstalling
warning: texlive-fontsextra-2016.43763-1.hyperbola2 is up to date -- reinstalling
warning: texlive-formatsextra-2016.41438-3 is up to date -- reinstalling
warning: texlive-genericextra-2016.43605-1 is up to date -- reinstalling
warning: texlive-latexextra-2016.43768-1.hyperbola2 is up to date -- reinstalling
warning: texlive-pictures-2016.43767-1 is up to date -- reinstalling
warning: texlive-plainextra-2016.43137-1 is up to date -- reinstalling
warning: texlive-pstricks-2016.43710-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...

Packages (15) texlive-bibtexextra-2016.43765-1  texlive-core-2016.43757-1.hyperbola2  texlive-fontsextra-2016.43763-1.hyperbola2
              texlive-formatsextra-2016.41438-3  texlive-games-2016.43415-1  texlive-genericextra-2016.43605-1
              texlive-htmlxml-2016.43769-1  texlive-humanities-2016.43711-1  texlive-latexextra-2016.43768-1.hyperbola2
              texlive-music-2016.43375-1  texlive-pictures-2016.43767-1  texlive-plainextra-2016.43137-1  texlive-pstricks-2016.43710-1
              texlive-publishers-2016.43764-1  texlive-science-2016.43747-1

Total Download Size:     27.66 MiB
Total Installed Size:  1300.90 MiB
Net Upgrade Size:       110.88 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 texlive-bibtexextra-2016.43765-1-any                   1541.4 KiB   275K/s 00:06 [###############################################] 100%
 texlive-games-2016.43415-1-any                          416.5 KiB   356K/s 00:01 [###############################################] 100%
 texlive-htmlxml-2016.43769-1-any                       1197.6 KiB   300K/s 00:04 [###############################################] 100%
 texlive-humanities-2016.43711-1-any                     299.0 KiB   664K/s 00:00 [###############################################] 100%
 texlive-music-2016.43375-1-any                           12.2 MiB   398K/s 00:31 [###############################################] 100%
 texlive-publishers-2016.43764-1-any                       9.2 MiB   471K/s 00:20 [###############################################] 100%
 texlive-science-2016.43747-1-any                          2.9 MiB   376K/s 00:08 [###############################################] 100%
(15/15) checking keys in keyring                                                  [###############################################] 100%
(15/15) checking package integrity                                                [###############################################] 100%
(15/15) loading package files                                                     [###############################################] 100%
(15/15) checking for file conflicts                                               [###############################################] 100%
(15/15) checking available disk space                                             [###############################################] 100%
:: Processing package changes...
( 1/15) reinstalling texlive-core                                                 [###############################################] 100%
>>> updmap custom entries should go into /etc/texmf/web2c/updmap-local.cfg
>>> fmtutil custom entries should go into /etc/texmf/web2c/fmtutil-local.cnf
( 2/15) installing texlive-bibtexextra                                            [###############################################] 100%
( 3/15) reinstalling texlive-fontsextra                                           [###############################################] 100%
( 4/15) reinstalling texlive-formatsextra                                         [###############################################] 100%
( 5/15) installing texlive-games                                                  [###############################################] 100%
( 6/15) reinstalling texlive-genericextra                                         [###############################################] 100%
( 7/15) installing texlive-htmlxml                                                [###############################################] 100%
( 8/15) reinstalling texlive-latexextra                                           [###############################################] 100%
( 9/15) installing texlive-humanities                                             [###############################################] 100%
Optional dependencies for texlive-humanities
    texlive-pictures: for package qtree [installed]
(10/15) installing texlive-music                                                  [###############################################] 100%
Optional dependencies for texlive-music
    python2: for scripts from the lilyglyphs packages [installed]
(11/15) reinstalling texlive-pictures                                             [###############################################] 100%
(12/15) reinstalling texlive-plainextra                                           [###############################################] 100%
(13/15) reinstalling texlive-pstricks                                             [###############################################] 100%
(14/15) installing texlive-publishers                                             [###############################################] 100%
(15/15) installing texlive-science                                                [###############################################] 100%
Optional dependencies for texlive-science
    python2-pygments: for pygmentex
:: Running post-transaction hooks...
(1/3) Updating TeXLive filename database...
(2/3) Updating TeXLive format files...

kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf csr10

! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf ecrm1000

! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm ecrm1000
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf ecrm1000

! I can't find file `ecrm1000'.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Please type another input file name
! Emergency stop.
<*> ...ljfour; mag:=1; nonstopmode; input ecrm1000

Transcript written on mfput.log.
grep: ecrm1000.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ecrm1000' failed to make ecrm1000.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf csr10

! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.

kpathsea: Running mktextfm csr10
mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10
This is METAFONT, Version 2.7182818 (TeX Live 2016/Hyperbola) (preloaded base=mf)

kpathsea: Running mktexmf csr10

! I can't find file `csr10'.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Please type another input file name
! Emergency stop.
<*> ...e:=ljfour; mag:=1; nonstopmode; input csr10

Transcript written on mfput.log.
grep: csr10.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input csr10' failed to make csr10.tfm.
kpathsea: Appending font creation commands to missfont.log.
fmtutil [ERROR]: running `pdftex -ini   -jobname=utf8mex -progname=utf8mex -enc *utf8mex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile pdfmex.ini for pdfmex/pdftex not found.
fmtutil [ERROR]: running `pdftex -ini   -jobname=csplain -progname=csplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini   -jobname=pdfjadetex -progname=pdfjadetex *pdfjadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini   -jobname=jadetex -progname=jadetex *jadetex.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [WARNING]: inifile mex.ini for mex/pdftex not found.
fmtutil [ERROR]: running `xetex -ini   -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `pdftex -ini   -jobname=pdfcsplain -progname=pdfcsplain -etex -enc csplain-utf8.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
fmtutil [ERROR]: running `luatex -ini   -jobname=pdfcsplain -progname=pdfcsplain -etex csplain.ini </dev/null' return status 1
fmtutil [ERROR]: return error due to options --strict
error: command failed to execute correctly
(3/3) Updating TeXLive font maps...
[~]
a
PackagesAnyBug ReportVery LowHighDesite "noauto" specified in /etc/fstab all devices get...Unconfirmed
0%
Task Description

Description:

I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.

Who can help me, not to mount a device during boot?

PackagesAnyImplementation RequestVery LowHigh[glom]: should depend on libgdaUnconfirmed
0%
Task Description

Description:

glom cannot run without libgda, so it should depend on libgda package

PackagesAnyFeature RequestVery HighHigh[sage-notebook] contains systemd unit fileIn Progress
30%
Task Description

Description:

  • The Arch version of Sage-notebook from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required. OpenRC init script replacement isn’t possible here because Sage-notebook is using a systemd unit file adapted for users instead of system users.

Additional info:
* package version(s)
* config and/or log files etc.

Repository      : community
Name            : sage-notebook
Version         : 0.13-4
Description     : Browser-based notebook interface for SageMath
Architecture    : any
URL             : http://www.sagemath.org
Licenses        : GPL3
Groups          : None
Provides        : None
Depends On      : sagemath  python2-twisted  python2-flask-oldsessions  python2-flask-openid  python2-flask-autoindex  python2-flask-babel  mathjax
Optional Deps   : python2-pyopenssl: to use the notebook in secure mode
Conflicts With  : None
Replaces        : None
Download Size   : 1625.00 KiB
Installed Size  : 9154.00 KiB
Packager        : Antonio Rojas <arojas@archlinux.org>
Build Date      : Thu 04 May 2017 06:12:28 PM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
/usr/lib/systemd/user/sage.service is owned by sage-notebook 0.13-4

Steps to reproduce:

  • Install package.
Showing tasks 401 - 450 of 513 Page 9 of 11<<First - 7 - 8 - 9 - 10 - 11 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing