All Projects

ProjectCategory  ascTask TypePrioritySeveritySummaryStatusProgress
PackagesAnyFeature RequestVery LowVery LowDreamchess package wantedUnconfirmed
0%
Task Description

this package is under gpl3. It is the most reasonable chess game because it can be easy or hard depending on your preference.

PackagesAnySecurity IssueVery LowMediumDownload debian-fixes instead of relying on external so...Unconfirmed
0%
Task Description

It happened already with minetest and again with prosody: When trying to build own packages with makepkg there are patches downloaded from the Debian-project. But the given HTTP(S)-sources are no longer available, concrete example within prosody to be found: https://deb.debian.org/debian/pool/main/p/prosody/prosody_0.10.2-1~bpo9+1.debian.tar.xz (not available)

Please don’t rely on those external sources when creating PKGBUILD-files or just give users the possibility for a secure and granted download. Therefore I cannot build prosody on my own now!

PackagesAnyFreedom IssueVery LowLowDial helpline number to find solutions of cash app card...Unconfirmed
0%
Task Description

Seeing the cash app card balance is easy and quick. Are you getting an issue in knowing the balance? But, you need to ask your technical queries to the team of professionals for immediate technical guidance. Get a quick fix of every problem with the cash app by connecting with us.

https://www.cashapp-customerservice.com/blog/check-balance-on-cash-app-card/

PackagesAnyBug ReportVery LowHighDesite "noauto" specified in /etc/fstab all devices get...Unconfirmed
0%
Task Description

Description:

I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.

Who can help me, not to mount a device during boot?

PackagesAnyFreedom IssueVery LowLowCan 123.hp.com/setup help me to fix HP Printer error co...Unconfirmed
0%
Task Description

You will see this code on the control panel of the printer while you are trying to scan. It might show up when you try to scan some heavy book or documents. There is no need to worry as you can fix it easily by following these simple steps from 123.hp.com/setup:

  • Turn on the printer and wait till it is in an idle state
  • Remove the printer from the power supply and wait for a minute or so
  • Plug the cables back and reconnect the power cord utility to the back part of the printer and switch it on
  • Let it pass through the warm up stage and wait till the light on the printer blinks. This will fix the issue and try putting one sheet at a time in the scanner

If you still face any issue then just visit 123.hp.com/setup and get help instantly from the experts.

PackagesAnyFeature RequestVery LowMediumAdd Trinity DesktopUnconfirmed
0%
Task Description

I would like this, because, it looks even better than xfce4. It does use an older qt3 though, BUT, they are maintaining QT3 and improving it themselves.

Plus, its more lightweight than xfce4 and maybe even lxqt too without looking like crap like lxqt and yet still is better than a WM.

I know you don’t like stuff that is abandonware in any sense, but given its being maintained, I hope you will add it.

But let me know.

PackagesAnyImplementation RequestVery LowHighAdd MPTCP (MultiPath TCP) to HyperbolaUnconfirmed
0%
Task Description

https://aur.archlinux.org/packages/linux-mptcp/

Kernel Patch for 4.9 :
http://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch

Compile :
https://multipath-tcp.org/pmwiki.php/Users/DoItYourself

PackagesAnyFreedom IssueVery LowLowAdd Lumina DesktopUnconfirmed
0%
Task Description

A Desktop Enivronment mostly focused on BSD, but also one that is very lightweight and easily customized. Would love to see this desktop on Hyperbola and later whenever Emulatorman makes it, Hyperbola/GNU/HyperBK

https://github.com/lumina-desktop/lumina/releases

Version is the latest one in above link of stable.

PackagesAnyFeature RequestVery LowMediumAdd Draco DesktopUnconfirmed
0%
Task Description

https://github.com/rodlie/draco

its like Lumina Desktop, but its more lightweight and better for Gnu/Linux

:)

Matter of fact, I hope its okay, but the latest stable build, of Draco is vastly better than Lumina. And for this reason I wanted to know if you could put higher priority on this than the Lumina Desktop request.

PackagesAnyBackport RequestVery LowLow elogind packageUnconfirmed
0%
Task Description

Description:
Was wondering if there is any issue in terms of freedom andor privacy for the inclusion of elogind? Feedback will be apreciated Cheers.

this was recently implemented in gentoo.

source:
https://libregit.org/i3_relativism/elogind

references:
https://blogs.gentoo.org/leio/2019/03/26/gnome-3-30/#comment-9555 https://forums.gentoo.org/viewtopic-t-1094796.html

contact gentoo developer for help in implementation:
https://wiki.gentoo.org/wiki/User:Leio/TODO

ServicesFlyspray BrandingImplementation RequestMediumMediumAdd Hyperbola branding to HyperTaskIn Progress
40%
Task Description

Add Hyperbola branding to HyperTask such as HyperWiki and HyperForum for prolixity reasons.

ServicesFlyspray IssueBug ReportVery LowMedium[Flyspray] long tags break the backendUnconfirmed
0%
Task Description

When I was adding this task, I put some long tags on it (html form allowed that) and got an error concerning too long tags field to fit in an sql datatype (max is 40 chars). Task got added anyway (just without tags). I didn’t know that and created it again.

ServicesFlyspray IssueImplementation RequestVery LowLowSetting avatar picture on flyspry at issues.hyperbola.i...Unconfirmed
0%
Task Description

So avatar uploading is not working well, and picture is getting minimized to nothing.

ServicesFlyspray IssueSecurity IssueVery LowLowAfter account confirmation, crypt: No salt parameter wa...Unconfirmed
0%
Task Description

After confirming the newly created account (typing the confirmation code, the passwoard and its confirmation, and clicking the button to continue), the following error appears:

  Notice: crypt(): No salt parameter was specified. You must use a randomly generated salt and a strong hash function to produce a secure hash. in /srv/http/flyspray/includes/class.flyspray.php on line 656 

The account login seems to work normaly.

Software DevelopmentGeneralSecurity IssueVery LowHighspacefm possible security errorUnconfirmed
0%
Task Description

No root settings found in /etc/spacefm/ Setting a root editor in Preferences should remove this warning on startup. Otherwise commands run as root may present a security risk.
EXEC(/usr/share/applications/sakura.desktop)=sakura

I am not sure how much of a risk this is, I will set it at high for now, but feel free to change it to low if its not a huge issue.

ServicesGeneralFeature RequestVery LowLowhyperbola branding - add guidelines to packagesUnconfirmed
0%
Task Description

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

InstallationGeneralFreedom IssueVery LowHigh[openbox] provides nonfree software support in the menuUnconfirmed
0%
Task Description

my recommended fix, make it reflect the applications that are actually installed on the system after removing non-free software support.

InstallationGeneralFreedom IssueVery LowLow[jwm] provides nonfree software support in the menu Unconfirmed
0%
Task Description

my recommended fix, make it reflect the applications that are actually installed on the system after removing non-free software support.

InstallationGeneralFeature RequestVery LowLow[calamares] add graphical installer with FDE supportResearching
0%
Task Description

Package Request: https://github.com/calamares/calamares

Original Bug Report:
— I would also like to test the beta isos when they are ready through qemu. If it looks good I plan to fully install them onto my laptop. My libreboot x200.

I don’t know if I should make a separate feature for this, but xfce is a good stable desktop environment for such a choice. that and lxde.

Though lxde is going to die...

Software DevelopmentGeneralFeature RequestMediumLow[Website] Rework for the onion-pageUnconfirmed
0%
Task Description

As proposed in a separate thread (https://forums.hyperbola.info/viewtopic.php?id=573): The navigation-bar needs a rework when accessing the website about the onion-protocol.

InstallationGeneralFeature RequestVery LowLow[FAQ]Please note that not all RAR archives are supporte...Unconfirmed
0%
Task Description

I tried to extract a RAR v5 archive using unar that works fine when using the non-free unrar.

Here is the log (with the file name altered)

$ unar file.part1.rar
file.part1.rar: RAR 5

file.mp4  (-2144860915 B)... Failed! (Attempted to read more data than was available)

Extraction to current directory failed! (1 file failed.)

Please add in the FAQ that newer RAR archives (version 5) may not work when using unar.

ServicesGeneralFreedom IssueVery LowLowWith cash app customer service, get details why I can’t...Unconfirmed
0%
Task Description

Trying to resolve it? Can’t add cash to cash app For this, avail our cash app technical support for making the issues be rectified instantly. The technical specialists are available around the clock for quick guidance of the cash app users. Users can take help from experts at any time.

ServicesGeneralFreedom IssueVery LowLowWhy is my Epson printer offline?Unconfirmed
0%
Task Description

Do you ask yourself ‘why is my Epson printer offline’ even when it is turned on? If yes then you are in the right place as we are here to provide you a solution that will fix this issue.
If your printer is linked with an Ethernet cable then ensure that the cable is attached to the router and the printer in a proper manner. If you require an IP address then you can print a network configuration page.
If you are using a USB cable then you should check if it is loose or not. If you think that there is a problem with the USB cable then you can also connect it directly as an alternative to using a hub.
If it is a wireless connection then use the network configuration page to get the IP address and ensure that the printer and the system are both connected to one wifi connection.
https://www.printersupportpro.us/epson-printer-offline

InstallationGeneralImplementation RequestVery LowLowTo make installation instructions and get use of live I...Unconfirmed
0%
Task Description

I have installed multiple times Hyperbola, 4 times on 4 different notebooks.

What I have noticed is that the live ISO is quite huge in relation to the task that should be done. Namely. the live ISO shall at least contain some first packages, so that they do not need to be downloaded online.

Best would be if the live ISO can be copied straight and that system can run from ISO/DVD without having Internet. At least one simple graphical environment shall be included.

Further, I have noticed that there is only network instructions as HTML file.

I would rather call it installation-instructions.html to make it clear for people what it is. Or simply: INSTALL.html so that people understand what it is.

It says just network.html if I remember well.

Then there is absolutely no point or link or reference to the installation instructions.

Each time I got a network I had to go to either duckduckgo search engine or to hyperbola.info website and then I tried with lynx to find installation instructions.

It is not straight, not quite clearly in open, it is in Wiki, but that is quite hard to find.

We have to put ourselves in the shoes of those in need of free software. Millions of people need free software.

Many of us live in a developed western countries.

Yet millions of people in need of this software live in South America, Africa, Asia, Eastern Europe.

There are millions of students that could advance their study, and that could progress faster with free software.

In those countries Internet is often non-existent, universities may be located in poor network areas, Internet is being fetched by using mobile phones.

So if there is a live distribution, such shall at least contain basic software, which really can fit onto any DVD, and that as such can be copied on the computer without using Internet. Upgrades could be fetched by using Internet.

And there shall be clear reference, link or file about installation. There shall be no need to go to Internet to install the software.

Software DevelopmentGeneralBug ReportHighCriticalRunit errors,Unconfirmed
0%
Task Description

/sbin/openrc-run: bad interpreter: No such file or directory

I get this error whenever I try to start dhcpcd with sv /etc/runit/

And for sndiod I get this doing the same guide,

warning: sndiod: unable to open supervise/ok: file does not exist

Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.

Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.

This is what I did:

=⇒ Add a service:

ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>

more or less, I used this guide.

Software DevelopmentGeneralImplementation RequestDeferCriticalRISC-V (riscv64) porting + multilib supportDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.

NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .

Software DevelopmentGeneralImplementation RequestVery HighCriticalPOWER (ppc64le) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).

NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .

ServicesGeneralFreedom IssueVery LowLowIssue with scanner bringing about Apple Pay to Cash App...Unconfirmed
0%
Task Description

An issue with the scanner is quite possibly the most well-known ones and can be settled in the event that you want to eliminate the Apple Pay to Cash App mistake by utilizing the strategies that you can without much of a stretch find in the assistance community or investigate visiting the technical support locales.

ServicesGeneralFreedom IssueVery LowLowHow do I resolve Gmail not receiving emails issue on An...Unconfirmed
0%
Task Description

To resolve External LinkGmail not receiving emails issue on Android phone, one has to follow some steps such as:
1. First, update or check the server.
2. Then go to Settings and click on the Filters and Blocked Address option.
3. After that, turn on the auto-sync option.
4. Next, change the data server settings.
By following the above-mentioned steps, Android users can resolve this issue. Although if the issue still exists then contact our support team.

ServicesGeneralFreedom IssueVery LowLowHow do I resolve Gmail not receiving emails issue on An...Unconfirmed
0%
Task Description

To resolve Gmail not receiving emails issue on Android phone, one has to follow some steps such as:
1. First, update or check the server.
2. Then go to Settings and click on the Filters and Blocked Address option.
3. After that, turn on the auto-sync option.
4. Next, change the data server settings.
By following the above-mentioned steps, Android users can resolve this issue. Although if the issue still exists then contact our support team.

InstallationGeneralFreedom IssueVery LowHighFS#1445 - [fluxbox] provides nonfree software support i...Unconfirmed
0%
Task Description

recommended fix, remove non-free software entries in menu and replace them with applications that actually exist.

Software DevelopmentGeneralImplementation RequestVery HighCriticalARM (aarch and armv7h) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.

NOTE: ARM porting is focused only for HyperbolaBSD .

Software DevelopmentHyperBKImplementation RequestVery HighCriticalDevelop a BSD descendant kernel for HyperbolaBSDIn Progress
30%
Task Description

Develop HyperBK (Hyper Berkeley Kernel), a BSD descendant kernel with GPL-compatible licenses preserved, non-compatible ones removed, and new code written under GPL-3 for HyperbolaBSD.

TODO:

  • Download OpenBSD kernel source code from OpenBSD siteDONE
  • Download LibertyBSD scripts to deblob and rebrand kernel from their scripts. → DONE
  • Push source to HyperBK’s project. → DONE
  • Rebrand OpenBSD kernel to HyperbolaBSD with LibertyBSD scripts. → DONE
  • Rebrand entire code (functions, variable, pointers, etc) under HyperbolaBSD → DONE
  • Remove files under non GPL-compatible licenses → DONE
  • Import code from another BSD systems under GPL-compatible licenses → IN PROGRESS
  • Write new code under GPL-3 → IN PROGRESS
  • Package HyperBK for HyperbolaBSD.

PATCHING NOTE

When the check concerns kernel, we obviously want to match with HyperbolaBSD.

Example of triplet check:	hyperbolabsd)
Example of uname -s check:	HyperbolaBSD)
Example of uname -r check:	0.1)
Example of C macro check:	defined(__HyperbolaBSD__)
Software DevelopmentHyperToolsImplementation RequestLowLow[hypertools] create libretools replacement for Hyperbol...Deferred
0%
Task Description

Create hypertools to replace libretools package for HyperbolaBSD and GNU/Linux

It’s long period to develop this package.
For now, a systemd-nspawn wrapper is being developed for “libretools”[0]

[0]:https://issues.hyperbola.info/index.php?do=details&task_id=86

ServicesHyperWebBug ReportVery LowMediumThe Mailling list don't workUnconfirmed
0%
Task Description

The Mailling list don't work : https://lists.hyperbola.info//mailman/listinfo/

ServicesHyperWeb IssueBug ReportVery LowLowRSS needs fixingUnconfirmed
0%
Task Description

Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.

ServicesHyperWiki/DokuWikiImplementation RequestVery LowMediumProvide binaries for the Ice*-UXP applications in their...Unconfirmed
0%
Task Description

This would ease their usage on other distros.

ServicesHyperWiki/DokuWikiImplementation RequestMediumMediumLibreboot hardening grub guideUnconfirmed
0%
Task Description

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

Software DevelopmentIcedove-UXPImplementation RequestDeferLowSwiftdove-UXP theme for Icedove-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftdove was a Thunderbird-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since FossaMail may potentially be revived on UXP in the future [0] and Swiftdove contains non-trademarked graphics and logos, we could port Swiftdove to UXP platform as theme for Icedove-UXP.

Software DevelopmentIcedove-UXPBug ReportVery LowMediumCardBook addon make icedove crash wen adding or editing...Unconfirmed
0%
Task Description

the cardbook version is 30.9 i tried with vcard 4.0 and vcard 3.0 same issue editing or creating a contact makes
icedove-uxp crash!

Software DevelopmentIceweasel-UXPImplementation RequestDeferLowSwiftweasel-UXP theme for Iceweasel-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftweasel was a Firefox-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since there are users encouraging us develop a Palemoon-based application , and Swiftweasel contains non-trademarked graphics and logos, we could port Swiftweasel to UXP platform as theme for Iceweasel-UXP.

Software DevelopmentIceweasel-UXPBackport RequestVery LowMediumRequest browser add-on: New Tab ToolsUnconfirmed
0%
Task Description

Name: New Tab Tools
Version: 81 (compatible Firefox version 52)
Source code: Github
Description: Customize Firefox’s. Tabs Page

https://github.com/darktrojan/newtabtools

https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/

Software DevelopmentIceweasel-UXPBackport RequestVery LowVery LowRequest browser add-on: FireGesturesUnconfirmed
0%
Task Description

Name: FireGestures
Version: 1.11.1 (compatible Firefox version 52)
Source code: Github
Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.

https://github.com/gomita/firegestures/

https://addons.mozilla.org/en-US/firefox/addon/firegestures/

ServicesMail Service IssueFeature RequestVery LowLowSupport RFC 3461: Delivery Status Notifications (DSNs)Unconfirmed
0%
Task Description

The RFC 3461 would allow Hyperbola email accounts to request the destination email providers to point out if an email was successfully delivered.

It might not cover all transport failures, but at least has a chance to know in advance whether the message was delivered, discarding the events that happen afterwards (be it to the main inbox or subject to filtering rules such as moving to other folder, marking as spam or deleted after receipt).

ServicesPunBB BrandingBug ReportHighHighForum appearance bugsIn Progress
100%
Task Description

Some forum display errors:

  1. preview button with the orange border.
  1. Error message when logging in gray color making it difficult to read
ServicesPunBB IssueBug ReportVery LowLowhyperbola forum smtp error and profile updateUnconfirmed
0%
Task Description

here i will report 2 issues and one change to make
issues:
1- there is a failed smtp error with post and reply
2- in the forum profile one cant add website with .xyz domain name

the change:
1- with pgp key one would add a short key link just like what was mentioned in here:
https://forums.hyperbola.info/viewtopic.php?pid=2639#p2639

PackagesStableBug ReportMediumHighopensmtpd: permission problemsIn Progress
0%
Task Description

Description:

cat msg | /usr/sbin/sendmail – sendmail: No such file or directorycannot create temporary file /var/spool/smtpd/offline/1572544775.XXXXIqNsFX

Additional info:
* package version: 6.4.2p1-1.hyperbola2.backports1

It is same problem as here:
https://github.com/OpenSMTPD/OpenSMTPD/issues/839

I could solve it with:

sudo chmod g+s /usr/sbin/smtpctl
sudo chmod g+s /usr/sbin/smtpctl

and then

sudo rc-service smtpd start

Even though I think I should not need to start it to use only sendmail.

PackagesStableBug ReportVery LowMediumnouveau_drv.so: undefined symbol: exaDriverAllocUnconfirmed
0%
Task Description

Any attempt to load Nouveau in X server results in the following error:

nouveau_drv.so: undefined symbol: exaDriverAlloc

Additional info

Steps to reproduce

  1. Stop the X server.
  2. Add a section such as the following to “/etc/X11/xorg.conf”:
    Section "Device"
      Identifier "Video card"
      Driver "nouveau"
      Option "Backlight" "nv_backlight"
    EndSection
  3. Start the X server.
PackagesStableBug ReportVery LowMediumlinphonec error (cli version)Unconfirmed
0%
Task Description

Description:
linphonec is unusable because a error produce a continuous log

Additional info:
linphone 3.11.1-1.hyperbola1

Steps to reproduce:
linphonec

Log:
linphonec> 2019-12-15 19:25:58:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:03:012 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:08:018 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:13:013 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:18:016 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:23:014 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:28:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:33:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:38:012 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:43:015 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:48:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:53:010 ortp-error-Error in connect: Network is unreachable

PackagesStableBug ReportVery LowHighjava cacerts file is emptyUnconfirmed
0%
Task Description

/etc/ssl/certs/java/cacerts has 0 entries, resulting in ssl handshake errors in java applications.

Package versions:
* ca-certificates 20170307-1
* ca-certificates-utils 20170307-1

Showing tasks 401 - 450 of 512 Page 9 of 11<<First - 7 - 8 - 9 - 10 - 11 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing