All Projects

ProjectCategory  ascTask TypePrioritySeveritySummaryStatusProgress
Software DevelopmentGeneralImplementation RequestVery HighCriticalPOWER (ppc64le) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).

NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .

Software DevelopmentGeneralImplementation RequestVery HighCriticalARM (aarch and armv7h) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.

NOTE: ARM porting is focused only for HyperbolaBSD .

Software DevelopmentGeneralImplementation RequestDeferCriticalRISC-V (riscv64) porting + multilib supportDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.

NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .

InstallationGeneralFreedom IssueVery LowHigh[openbox] provides nonfree software support in the menuUnconfirmed
0%
Task Description

my recommended fix, make it reflect the applications that are actually installed on the system after removing non-free software support.

InstallationGeneralFreedom IssueVery LowHighFS#1445 - [fluxbox] provides nonfree software support i...Unconfirmed
0%
Task Description

recommended fix, remove non-free software entries in menu and replace them with applications that actually exist.

InstallationGeneralFeature RequestVery LowLow[calamares] add graphical installer with FDE supportResearching
0%
Task Description

Package Request: https://github.com/calamares/calamares

Original Bug Report:
— I would also like to test the beta isos when they are ready through qemu. If it looks good I plan to fully install them onto my laptop. My libreboot x200.

I don’t know if I should make a separate feature for this, but xfce is a good stable desktop environment for such a choice. that and lxde.

Though lxde is going to die...

InstallationGeneralImplementation RequestVery LowLowTo make installation instructions and get use of live I...Unconfirmed
0%
Task Description

I have installed multiple times Hyperbola, 4 times on 4 different notebooks.

What I have noticed is that the live ISO is quite huge in relation to the task that should be done. Namely. the live ISO shall at least contain some first packages, so that they do not need to be downloaded online.

Best would be if the live ISO can be copied straight and that system can run from ISO/DVD without having Internet. At least one simple graphical environment shall be included.

Further, I have noticed that there is only network instructions as HTML file.

I would rather call it installation-instructions.html to make it clear for people what it is. Or simply: INSTALL.html so that people understand what it is.

It says just network.html if I remember well.

Then there is absolutely no point or link or reference to the installation instructions.

Each time I got a network I had to go to either duckduckgo search engine or to hyperbola.info website and then I tried with lynx to find installation instructions.

It is not straight, not quite clearly in open, it is in Wiki, but that is quite hard to find.

We have to put ourselves in the shoes of those in need of free software. Millions of people need free software.

Many of us live in a developed western countries.

Yet millions of people in need of this software live in South America, Africa, Asia, Eastern Europe.

There are millions of students that could advance their study, and that could progress faster with free software.

In those countries Internet is often non-existent, universities may be located in poor network areas, Internet is being fetched by using mobile phones.

So if there is a live distribution, such shall at least contain basic software, which really can fit onto any DVD, and that as such can be copied on the computer without using Internet. Upgrades could be fetched by using Internet.

And there shall be clear reference, link or file about installation. There shall be no need to go to Internet to install the software.

InstallationGeneralFeature RequestVery LowLow[FAQ]Please note that not all RAR archives are supporte...Unconfirmed
0%
Task Description

I tried to extract a RAR v5 archive using unar that works fine when using the non-free unrar.

Here is the log (with the file name altered)

$ unar file.part1.rar
file.part1.rar: RAR 5

file.mp4  (-2144860915 B)... Failed! (Attempted to read more data than was available)

Extraction to current directory failed! (1 file failed.)

Please add in the FAQ that newer RAR archives (version 5) may not work when using unar.

ServicesGeneralFeature RequestVery LowLowhyperbola branding - add guidelines to packagesUnconfirmed
0%
Task Description

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

InstallationGeneralFreedom IssueVery LowLow[jwm] provides nonfree software support in the menu Unconfirmed
0%
Task Description

my recommended fix, make it reflect the applications that are actually installed on the system after removing non-free software support.

Software DevelopmentHyperBKImplementation RequestVery HighCriticalDevelop a BSD descendant kernel for HyperbolaBSDIn Progress
30%
Task Description

Develop HyperBK (Hyper Berkeley Kernel), a BSD descendant kernel with GPL-compatible licenses preserved, non-compatible ones removed, and new code written under GPL-3 for HyperbolaBSD.

TODO:

  • Download OpenBSD kernel source code from OpenBSD siteDONE
  • Download LibertyBSD scripts to deblob and rebrand kernel from their scripts. → DONE
  • Push source to HyperBK’s project. → DONE
  • Rebrand OpenBSD kernel to HyperbolaBSD with LibertyBSD scripts. → DONE
  • Rebrand entire code (functions, variable, pointers, etc) under HyperbolaBSD → DONE
  • Remove files under non GPL-compatible licenses → DONE
  • Import code from another BSD systems under GPL-compatible licenses → IN PROGRESS
  • Write new code under GPL-3 → IN PROGRESS
  • Package HyperBK for HyperbolaBSD.

PATCHING NOTE

When the check concerns kernel, we obviously want to match with HyperbolaBSD.

Example of triplet check:	hyperbolabsd)
Example of uname -s check:	HyperbolaBSD)
Example of uname -r check:	0.1)
Example of C macro check:	defined(__HyperbolaBSD__)
Software DevelopmentHyperToolsImplementation RequestLowLow[hypertools] create libretools replacement for Hyperbol...Deferred
0%
Task Description

Create hypertools to replace libretools package for HyperbolaBSD and GNU/Linux

It’s long period to develop this package.
For now, a systemd-nspawn wrapper is being developed for “libretools”[0]

[0]:https://issues.hyperbola.info/index.php?do=details&task_id=86

ServicesHyperWebBug ReportVery LowMediumThe Mailling list don't workUnconfirmed
0%
Task Description

The Mailling list don't work : https://lists.hyperbola.info//mailman/listinfo/

ServicesHyperWeb IssueBug ReportVery LowLowRSS needs fixingUnconfirmed
0%
Task Description

Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.

ServicesHyperWiki/DokuWikiImplementation RequestMediumMediumLibreboot hardening grub guideUnconfirmed
0%
Task Description

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

ServicesHyperWiki/DokuWikiImplementation RequestVery LowMediumProvide binaries for the Ice*-UXP applications in their...Unconfirmed
0%
Task Description

This would ease their usage on other distros.

Software DevelopmentIcedove-UXPImplementation RequestDeferLowSwiftdove-UXP theme for Icedove-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftdove was a Thunderbird-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since FossaMail may potentially be revived on UXP in the future [0] and Swiftdove contains non-trademarked graphics and logos, we could port Swiftdove to UXP platform as theme for Icedove-UXP.

Software DevelopmentIceweasel-UXPBackport RequestVery LowMediumRequest browser add-on: New Tab ToolsUnconfirmed
0%
Task Description

Name: New Tab Tools
Version: 81 (compatible Firefox version 52)
Source code: Github
Description: Customize Firefox’s. Tabs Page

https://github.com/darktrojan/newtabtools

https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/

Software DevelopmentIceweasel-UXPImplementation RequestDeferLowSwiftweasel-UXP theme for Iceweasel-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftweasel was a Firefox-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since there are users encouraging us develop a Palemoon-based application , and Swiftweasel contains non-trademarked graphics and logos, we could port Swiftweasel to UXP platform as theme for Iceweasel-UXP.

Software DevelopmentIceweasel-UXPBackport RequestVery LowVery LowRequest browser add-on: FireGesturesUnconfirmed
0%
Task Description

Name: FireGestures
Version: 1.11.1 (compatible Firefox version 52)
Source code: Github
Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.

https://github.com/gomita/firegestures/

https://addons.mozilla.org/en-US/firefox/addon/firegestures/

ServicesPunBB BrandingBug ReportHighHighForum appearance bugsIn Progress
100%
Task Description

Some forum display errors:

  1. preview button with the orange border.
  1. Error message when logging in gray color making it difficult to read
PackagesStableBug ReportMediumCritical[torsocks] which: no getcapRequires Testing
90%
Task Description

Current torsocks version is broken.
It returns the following error when attempting to torify application :

which: no getcap
PackagesStableFreedom IssueVery LowCritical[elementary-icon-theme] Contains non-FSDG compliant dis...Assigned
0%
Task Description

About that distro, Elementary OS is semi-libre/free, Ubuntu based, long term support, but does not comply with the GNU Free System Distributibution Guidelines (FSDG). To either rebrand or remove existing non-FSDG compliant distro icon files.

The following affected files are present in this list:

  • /usr/share/icons/elementary/places/16/distributor-logo.svg
  • /usr/share/icons/elementary/places/24/distributor-logo.svg
  • /usr/share/icons/elementary/places/32/distributor-logo.svg
  • /usr/share/icons/elementary/places/48/distributor-logo.svg
  • /usr/share/icons/elementary/places/64/distributor-logo.svg
  • /usr/share/icons/elementary/places/128/distributor-logo.svg
  • /usr/share/icons/elementary/places/symbolic/distributor-logo-symbolic.svg
PackagesStableFreedom IssueVery LowCritical[conky] Some serious issuesAssigned
0%
Task Description

I’m writing here about the package Conky. It is the useful widget of system monitor into your desktop, but there are some serious issues:

Config variables

  • distribution outputs the string “Arch Linux” instead of “Hyperbola GNU/Linux-libre”.
  • eve requires users to use API for non-libre/free video game EVE Online, and should be removed.
  • All Beep Media Player (BMPx) related variables (including bmpx_album, bmpx_artist, bmpx_bitrate, bmpx_title, bmpx_track and bmpx_uri) are obselete and useless, and should be removed because the package BMPx isn’t present on Arch and Hyperbola official repositories but Arch User Repository (AUR).
  • [For Milky Way version 0.4.x only] All PulseAudio related variables (including if_pa_sink_muted, pa_sink_volume, pa_sink_volumebar, pa_sink_description, pa_card_name and pa_card_active_profile) are no longer used, and should be removed due replaced the default audio server with sndio.

Manual

  • Contains non-FDSG compliant distros.
  • Contains vague terminology.
  • Requires users to use API for non-libre/free weather network service(s) (including The Weather Channel).
PackagesStableDrop RequestVery LowCritical[osdbattery] Unmaintained and unsupportableUnconfirmed
0%
Task Description

osdbattery is (probably) useless and broken so Conky did compete because It is still unmaintained and unsupported over 14 years ago (last released version 1.4 on August 23, 2005), and should be removed per anti-abandonware rule at the packaging guidelines.

Also, the default config file contains non-libre/free Microsoft font Verdana as X11 font format property in font variable.

PackagesStableBug ReportVery LowCritical[smartmontools] update-smart-drivedb fails to updateUnconfirmed
0%
Task Description

smartmontools 6.5-1.hyperbola1

Error while trying to update smart-drivedb :

anon@test[~] update-smart-drivedb

External Link/usr/bin/update-smart-drivedb: download from branches/RELEASE_6_5_DRIVEDB failed (curl: exit 23) /usr/bin/update-smart-drivedb: download from trunk failed (curl: exit 23)

PackagesStableSecurity IssueVery LowCritical[lts-kernel][sec] filter /dev/mem access & restrict acc...Unconfirmed
0%
Task Description

These two options could be enabled :

Kernel hacking → [*] Filter access to /dev/mem
[*] Filter I/O access to /dev/mem

Security options → [*] Restrict unprivileged access to the kernel syslog

PackagesStableUpdate RequestHighHigh[qt5] upgrade Qt project to the 5.6 LTS version, requir...Deferred
0%
Task Description

Cannot mix incompatible Qt library (version 0×50800) with this library (version 0×50904)
Aborted

./Nextcloud-2.3.3-x86_64.AppImage: /usr/lib/libQt5Core.so.5: version `Qt_5.9’ not found (required by /tmp/.mount_NextclpprMnG/usr/bin/../lib/libqt5keychain.so.1

These two packages are directly affected by an older qt5...

Could you update all the qt packages to the LTS version available?

PackagesStableBug ReportVery LowHighjava cacerts file is emptyUnconfirmed
0%
Task Description

/etc/ssl/certs/java/cacerts has 0 entries, resulting in ssl handshake errors in java applications.

Package versions:
* ca-certificates 20170307-1
* ca-certificates-utils 20170307-1

PackagesStableFeature RequestVery HighHigh[hiawatha]: remove systemd files, provide openrcResearching
0%
Task Description

Description:

Hiawatha contains only systemd files.

It shall be removed and openrc shall be provided

PackagesStableBug ReportVery LowHigh[devede] xorriso unsupported option '-dvd-video'Assigned
0%
Task Description

Description:

Devede fails to convert transcoded videos to iso format with libburn-1.5.0.

Drive current: -outdev 'stdio:/home/heckyel/movie/movie.iso'
Media current: stdio file, overwriteable
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data,  334g free
xorriso : FAILURE : -as genisofs: Unsupported option '-dvd-video'
xorriso : NOTE : -return_with SORRY 32 triggered by problem severity FAI

Additional info:

$ pacman -Si devede
Repositorio               : community
Nombre                    : devede
Versión                   : 4.8.8-1
Descripción               : A program to create VideoDVDs and CDs
Arquitectura              : any
URL                       : http://www.rastersoft.com/programas/devede.html
Licencias                 : GPL3
Grupos                    : Nada
Provee                    : Nada
Depende de                : mencoder  ffmpeg  dvdauthor  vcdimager  cdrkit  ttf-dejavu
                            gtk3  python-cairo  python-gobject  python-setuptools
Dependencias opcionales   : mplayer
                            vlc
                            mpv
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1640,88 KiB
Tamaño de la instalación  : 3331,00 KiB
Encargado                 : Sergej Pupykin <pupykin.s+arch@gmail.com>
Fecha de creación         : vie 10 feb 2017 05:06:37 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Link’s code:

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/mkisofs.py#L61

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/genisoimage.py#L61

Steps to reproduce:

- Install devede
- Create video DVD disc

PackagesStableFreedom IssueVery LowHighGNU Privacy Assistant (GPA)Unconfirmed
0%
Task Description

Hello Hyperbola!

GPA gives out the following errors upon opening the app.

First:

```
The GPGME library returned an unexpected
error at confdialog.c:1459. The error was:

    Unsupported protocol

This is either an installation problem or a bug in GPA.
GPA will now try to recover from this error.
```

Second:

```
Fatal Error in GPGME library
(invoked from file options.c, line 302):

    Unsupported protocol

The application will be terminated

What can I do to overcome these errors?
```
As this issue makes gpa app completely unusable, I have set this bug report’s severity as high.

I also request the admin to set priority to high due to it’s severity.

Thank you!

Regards,
RG.

PackagesStableBug ReportVery LowHigh[firewalld] Failed to read file "/proc/sys/net/netfilte...Unconfirmed
0%
Task Description

Additional info:
* package version(s)

# pacman -Si firewalld
Repositorio               : community
Nombre                    : firewalld
Versión                   : 0.4.4.4-1.hyperbola1
Descripción               : Firewall daemon with D-Bus interface, with OpenRC support
Arquitectura              : any
URL                       : https://github.com/t-woerner/firewalld
Licencias                 : GPL2
Grupos                    : Nada
Provee                    : Nada
Depende de                : dbus-glib  dconf  ebtables  hicolor-icon-theme  ipset  iptables
                            python-slip
Dependencias opcionales   : bash-completion: bash completion
                            gtk3: firewall-config
                            libnm-glib: firewall-config and firewall-applet
                            libnotify: firewall-applet
                            python-pyqt5: firewall-applet
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 532,05 KiB
Tamaño de la instalación  : 4865,00 KiB
Encargado                 : André Silva <emulatorman@hyperbola.info>
Fecha de creación         : lun 25 sep 2017 21:00:50 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

# tail -F /var/log/firewalld


2019-10-02 22:09:45 DEBUG1: Loading zone file ‘/usr/lib/firewalld/zones/internal.xml’
2019-10-02 22:09:45 DEBUG1: Loading zone file ‘/usr/lib/firewalld/zones/public.xml’
2019-10-02 22:09:45 DEBUG1: Loading zone file ‘/usr/lib/firewalld/zones/trusted.xml’
2019-10-02 22:09:45 DEBUG1: Loading zone file ‘/usr/lib/firewalld/zones/work.xml’
2019-10-02 22:09:45 DEBUG1: Using default zone ‘public’
2019-10-02 22:09:45 ERROR: Failed to read file “/proc/sys/net/netfilter/nf_conntrack_helper”: [Errno 2] No existe el fichero o el directorio: ‘/proc/sys/net/netfilter/nf_conntrack_helper’
2019-10-02 22:09:45 WARNING: Failed to get and parse nf_conntrack_helper setting
2019-10-02 22:09:45 FATAL ERROR: No IPv4 and IPv6 firewall.
2019-10-02 22:09:45 ERROR: Raising SystemExit in run_server

Steps to reproduce:

- Install package
- rc-service firewalld start
- firewalld –debug

PackagesStableBug ReportVery LowHigh[vlc] DVB : cache_block stream error: cannot pre fill b...Unconfirmed
0%
Task Description

Current VLC version (3.0.4-3.hyperbola1.backports1) fails to play DVB stream using a RTL2832 usb dongle.

I start the playlist like this :

vlc channels.conf

but it returns the following error :

cache_block stream error: cannot pre fill buffer

Also, it asks the user to be in “video” group to access DVB device, this was not needed before with Hyperbola 0.2.9. User being in “wheel” was enough.
Anyway, even after adding my user to video group, it still fails with “cache_block stream error: cannot pre fill buffer”

This is not an issue with my DVB adapter or driver. rtl2832 is correctly loaded. And I can play the channels.conf playlist just fine with “mpv” or “mplayer”.
Also, the channels.conf used works just fine with a more recent version of VLC on an other system (Manjaro) so something is broken with the current VLC used.

Maybe a package bump would fix the issue.

PackagesStableUpdate RequestLowHigh[pigeonhole] needs to be updated (depends on older vers...In Progress
0%
Task Description

Description:
The pigeonhole package depends on dovecot 2.2.29.1, which is in version 2.3.4.1-2.hyperbola1.backports1 at the moment. Due to this, I can’t use it

Additional info:
* pigeonhole 0.4.18-1

PackagesStableBug ReportVery LowHigh[nftables] init service ERROR: nftables failed to startUnconfirmed
0%
Task Description

Error: conflicting protocols specified: inet-service vs. icmp

when using

ip protocol icmp icmp type echo-request counter accept comment “accept ICMP echo-request type” ip6 nexthdr icmpv6 icmpv6 type { destination-unreachable, packet-too-big, time-exceeded, parameter-problem, mld-listener-query, mld-listener-report, mld-listener-reduction, nd-router-solicit, nd-router-advert, nd-neighbor-solicit, nd-neighbor-advert } accept comment “Accept ICMPv6”

It is a known bug on 0.7 and solved on 0.9

https://bugzilla.netfilter.org/show_bug.cgi?id=1073 commit 0011985554e269e1cc8f8e5b41eb9dcd795ebe8c fixes this problem upstream.

PackagesStableBug ReportVery LowHigh[apache][module] mod_wsgi returns "undefined symbol: Py...Unconfirmed
0%
Task Description

Description:
I updated mod_wsgi, restarted httpd service and got this error:

$ sudo rc-service httpd restart
 * httpd has detected an error in your setup:
httpd: Syntax error on line 183 of /etc/httpd/conf/httpd.conf: Cannot load modules/mod_wsgi.so into server: /etc/httpd/modules/mod_wsgi.so: undefined symbol: PyObject_SetItem
 * ERROR: httpd failed to stop

Additional info:
* mod_wsgi-4.4.22-1.hyperbola1

PackagesStableBug ReportMediumHighopensmtpd: permission problemsIn Progress
0%
Task Description

Description:

cat msg | /usr/sbin/sendmail – sendmail: No such file or directorycannot create temporary file /var/spool/smtpd/offline/1572544775.XXXXIqNsFX

Additional info:
* package version: 6.4.2p1-1.hyperbola2.backports1

It is same problem as here:
https://github.com/OpenSMTPD/OpenSMTPD/issues/839

I could solve it with:

sudo chmod g+s /usr/sbin/smtpctl
sudo chmod g+s /usr/sbin/smtpctl

and then

sudo rc-service smtpd start

Even though I think I should not need to start it to use only sendmail.

PackagesStableImplementation RequestVery LowHigh[simplescreenrecorder] Malfunctional when not removing ...Assigned
0%
Task Description

Within the last commit regarding the package simplescreenrecorder the interface for pulseaudio was removed. So far, so good. But without the complete removal of pulseaudio the application is enforced to use ALSA emulation for PulseAudio on systems with libpulse installed and that usually only makes things worse.

Please undo this for version 0.3 until the removal of pulseaudio is complete.

PackagesStableFeature RequestMediumHigh[ntfs-3g] require FHSAssigned
0%
Task Description

Description:

ntfs-3g needs FHS adaptation

Additional info:
* package version(s)

2017.3.23-1

* config and/or log files etc.

$ pacman -Ql ntfs-3g
ntfs-3g /usr/
ntfs-3g /usr/bin/
ntfs-3g /usr/bin/lowntfs-3g
ntfs-3g /usr/bin/mkfs.ntfs
ntfs-3g /usr/bin/mkntfs
ntfs-3g /usr/bin/mount.lowntfs-3g
ntfs-3g /usr/bin/mount.ntfs
ntfs-3g /usr/bin/mount.ntfs-3g
ntfs-3g /usr/bin/ntfs-3g
ntfs-3g /usr/bin/ntfs-3g.probe
ntfs-3g /usr/bin/ntfscat
ntfs-3g /usr/bin/ntfsclone
ntfs-3g /usr/bin/ntfscluster
ntfs-3g /usr/bin/ntfscmp
ntfs-3g /usr/bin/ntfscp
ntfs-3g /usr/bin/ntfsfix
ntfs-3g /usr/bin/ntfsinfo
ntfs-3g /usr/bin/ntfslabel
ntfs-3g /usr/bin/ntfsls
ntfs-3g /usr/bin/ntfsrecover
ntfs-3g /usr/bin/ntfsresize
ntfs-3g /usr/bin/ntfssecaudit
ntfs-3g /usr/bin/ntfstruncate
ntfs-3g /usr/bin/ntfsundelete
ntfs-3g /usr/bin/ntfsusermap
ntfs-3g /usr/bin/ntfswipe
ntfs-3g /usr/include/
ntfs-3g /usr/include/ntfs-3g/
ntfs-3g /usr/include/ntfs-3g/acls.h
ntfs-3g /usr/include/ntfs-3g/attrib.h
ntfs-3g /usr/include/ntfs-3g/attrlist.h
ntfs-3g /usr/include/ntfs-3g/bitmap.h
ntfs-3g /usr/include/ntfs-3g/bootsect.h
ntfs-3g /usr/include/ntfs-3g/cache.h
ntfs-3g /usr/include/ntfs-3g/collate.h
ntfs-3g /usr/include/ntfs-3g/compat.h
ntfs-3g /usr/include/ntfs-3g/compress.h
ntfs-3g /usr/include/ntfs-3g/debug.h
ntfs-3g /usr/include/ntfs-3g/device.h
ntfs-3g /usr/include/ntfs-3g/device_io.h
ntfs-3g /usr/include/ntfs-3g/dir.h
ntfs-3g /usr/include/ntfs-3g/ea.h
ntfs-3g /usr/include/ntfs-3g/efs.h
ntfs-3g /usr/include/ntfs-3g/endians.h
ntfs-3g /usr/include/ntfs-3g/index.h
ntfs-3g /usr/include/ntfs-3g/inode.h
ntfs-3g /usr/include/ntfs-3g/ioctl.h
ntfs-3g /usr/include/ntfs-3g/layout.h
ntfs-3g /usr/include/ntfs-3g/lcnalloc.h
ntfs-3g /usr/include/ntfs-3g/logfile.h
ntfs-3g /usr/include/ntfs-3g/logging.h
ntfs-3g /usr/include/ntfs-3g/mft.h
ntfs-3g /usr/include/ntfs-3g/misc.h
ntfs-3g /usr/include/ntfs-3g/mst.h
ntfs-3g /usr/include/ntfs-3g/ntfstime.h
ntfs-3g /usr/include/ntfs-3g/object_id.h
ntfs-3g /usr/include/ntfs-3g/param.h
ntfs-3g /usr/include/ntfs-3g/plugin.h
ntfs-3g /usr/include/ntfs-3g/realpath.h
ntfs-3g /usr/include/ntfs-3g/reparse.h
ntfs-3g /usr/include/ntfs-3g/runlist.h
ntfs-3g /usr/include/ntfs-3g/security.h
ntfs-3g /usr/include/ntfs-3g/support.h
ntfs-3g /usr/include/ntfs-3g/types.h
ntfs-3g /usr/include/ntfs-3g/unistr.h
ntfs-3g /usr/include/ntfs-3g/volume.h
ntfs-3g /usr/include/ntfs-3g/xattrs.h
ntfs-3g /usr/lib/
ntfs-3g /usr/lib/libntfs-3g.so
ntfs-3g /usr/lib/libntfs-3g.so.88
ntfs-3g /usr/lib/libntfs-3g.so.88.0.0
ntfs-3g /usr/lib/ntfs-3g/
ntfs-3g /usr/lib/pkgconfig/
ntfs-3g /usr/lib/pkgconfig/libntfs-3g.pc
ntfs-3g /usr/share/
ntfs-3g /usr/share/doc/
ntfs-3g /usr/share/doc/ntfs-3g/
ntfs-3g /usr/share/doc/ntfs-3g/README
ntfs-3g /usr/share/man/
ntfs-3g /usr/share/man/man8/
ntfs-3g /usr/share/man/man8/mkfs.ntfs.8.gz
ntfs-3g /usr/share/man/man8/mkntfs.8.gz
ntfs-3g /usr/share/man/man8/mount.lowntfs-3g.8.gz
ntfs-3g /usr/share/man/man8/mount.ntfs-3g.8.gz
ntfs-3g /usr/share/man/man8/ntfs-3g.8.gz
ntfs-3g /usr/share/man/man8/ntfs-3g.probe.8.gz
ntfs-3g /usr/share/man/man8/ntfscat.8.gz
ntfs-3g /usr/share/man/man8/ntfsclone.8.gz
ntfs-3g /usr/share/man/man8/ntfscluster.8.gz
ntfs-3g /usr/share/man/man8/ntfscmp.8.gz
ntfs-3g /usr/share/man/man8/ntfscp.8.gz
ntfs-3g /usr/share/man/man8/ntfsdecrypt.8.gz
ntfs-3g /usr/share/man/man8/ntfsfallocate.8.gz
ntfs-3g /usr/share/man/man8/ntfsfix.8.gz
ntfs-3g /usr/share/man/man8/ntfsinfo.8.gz
ntfs-3g /usr/share/man/man8/ntfslabel.8.gz
ntfs-3g /usr/share/man/man8/ntfsls.8.gz
ntfs-3g /usr/share/man/man8/ntfsprogs.8.gz
ntfs-3g /usr/share/man/man8/ntfsrecover.8.gz
ntfs-3g /usr/share/man/man8/ntfsresize.8.gz
ntfs-3g /usr/share/man/man8/ntfssecaudit.8.gz
ntfs-3g /usr/share/man/man8/ntfstruncate.8.gz
ntfs-3g /usr/share/man/man8/ntfsundelete.8.gz
ntfs-3g /usr/share/man/man8/ntfsusermap.8.gz
ntfs-3g /usr/share/man/man8/ntfswipe.8.gz
PackagesStableBug ReportVery LowHigh[ispell] require FHSRequires Testing
100%
Task Description

Description:

cant open /usr/local/lib/english.hash

Additional info:

Repository      : extra
Name            : ispell
Version         : 3.3.02-7
Description     : An interactive spell-checking program for Unix
Architecture    : x86_64
URL             : http://ficus-www.cs.ucla.edu/geoff/ispell.html
Licenses        : BSD
Groups          : None
Provides        : None
Depends On      : ncurses
Optional Deps   : None
Conflicts With  : None
Replaces        : None
Download Size   : 321.26 KiB
Installed Size  : 1336.00 KiB
Packager        : Evangelos Foutras <evangelos@foutrelis.com>
Build Date      : Sun Sep 6 12:07:06 2015
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Steps to reproduce:

- Install package

PackagesStableBug ReportVery LowMedium[kodi-addons-visualization] addons don't workUnconfirmed
0%
Task Description

After installation, none of the addons is present in Kodi!

PackagesStableBug ReportMediumMedium[libusb] error when mounting USB memories on virtual ma...Researching
0%
Task Description

## Bug ##

libusb: error [_get_usbfs_fd] libusb couldn’t open USB device /dev/bus/usb/003/003: permission denied libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.

Reference links: https://askubuntu.com/questions/526962/libusb-couldnt-open-usb-device-dev-bus-usb-002-006-permission-denied-libusb

PackagesStableBug ReportVery LowMedium[cowsay] perl-text-charwidth dependency missingUnconfirmed
0%
Task Description

cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency

Error message :

“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14.
BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”

After installing perl-text-charwidth, it works fine.

PackagesStableBug ReportMediumMedium[linux-libre-lts] [i915] Display freeze : hpd interrupt...Deferred
0%
Task Description

Hello,

I recently acquired a T400 Thinkpad with 1440×900 panel.
On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.

Both Thinkpad are running the same Hyperbola installation :

Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf)
Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message)
video driver : modesetting
DE : xfce4 with xfwm4

On the Thinkpad x200, everything works great, no issue to report.

On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :

hpd interrupt storm detected on connector hdmi-a-1

And the display (and sound) freezes for 10 seconds (sometimes more !)

As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.

Results :

With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo.
With 4.16.8 : Issue is not present ! No more freeze !

I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series.
Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.

Thanks for your help

PackagesStableBug ReportVery LowMedium[nfs-utils] missing idmapd.confUnconfirmed
0%
Task Description

Hello,

When mounting an NFS share, I get a warning about missing idmpad.conf

rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...

Debian includes a default config file for idmap :

[General]

Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain

[Mapping]

Nobody-User = nobody
Nobody-Group = nogroup
PackagesStableBug ReportMediumMedium[virt-install] ERROR '_OsVariant' object has no attribu...Requires Testing
100%
Task Description

Trying to create a VM using virt-install (1.4.1-2.hyperbola2)

virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'

This error shows up :
ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’

I can’t create the VM.

PS : Error is not present on Debian Stretch with virt-install 1.4.0-5

Thanks for your help.

PackagesStableBug ReportVery LowMediumPCManFM display different behaviorUnconfirmed
0%
Task Description

Description:

The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted.
I do have dbus, gvfs & ntfs-3g installed and active services.

Additional info:
* package version(s)
PCManFM 1.2.5 - using LibFM ver. 1.2.5

Steps to reproduce:
Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.

PackagesStableBug ReportLowMediumGarbled display with xfce4-terminal (terminfo)Unconfirmed
0%
Task Description

A very nasty bug I wasn’t able to find an answer to.
I compiled stuff (buildroot) using menuconfig, the menu display was fine in xfce4-terminal (See screenshot #1)
I restarted the config a few days later with the same command :

$ make menuconfig

and this time the display was messed up (See screenshot #2)

After investigation, I noticed a directory (filled with stuff) have been created in my home folder :

.terminfo

I don’t know why. But anyway, if I delete it, then the display is ok again.
I noticed that if I use good old xterm terminal, then the display is fine even if the .terminfo directory is present. (it uses “xterm” instead of xterm-256color)

But, with xfce4-terminal (and others, I tried with gnome-terminal, sakura..), the display is messed up if the .terminfo directory is present in my home folder.

I also noticed that if I run the command in a screen session, the issue is not present.

(I open xfce4-terminal)

$ screen
$ printenv TERM
screen.xterm-256color
$ make menuconfig (or htop, or other program using ncurses)

= display ok

but with default :

(I open xfce4-terminal)

$ printenv TERM
xterm-256color
make menuconfig (or htop, or other program using ncurses)

= display messed up if .terminfo directory is present

So I have no idea why this .terminfo directory is generated. What could trigger its generation ? Is that an issue with ncurses or something else ?

Thanks for your help

PackagesStableBug ReportVery LowMediumMouse curse become invisible from beginning in kde5 pla...Unconfirmed
0%
Task Description

Description:
I install plasma and xorg to my Hyperbola GNU/Linux-libre in Arch-way.
However, after reboot, everything is fine except mouse curse.

I attempt to reinstall plasma-desktop and reboot. But nothing changes.

In attachment, the mouse stop at backward, however it is invisible.

Additional info:
* package version(s)
plasma-desktop == 5.9.5-1
xorg-server == 1.19.6-2.hyperbola1
sddm == 0.14.0-2.hyperbola6

* config and/or log files etc.

Steps to reproduce:

Showing tasks 401 - 450 of 485 Page 9 of 10<<First - 6 - 7 - 8 - 9 - 10 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing