All Projects

ProjectCategoryTask TypePrioritySeverity  descSummaryStatusProgress
PackagesAnyFreedom IssueVery LowLow[kobodeluxe]: segmentation faultUnconfirmed
0%
Task Description

Description:

kobodl
Application path: ‘.’ [41] Could not get double buffered display.
[41] Shadow buffer requested; relying on SDL’s shadow buffer.
[279] audio.c: Warning: Requested 1024 samplebuffer, but got 512 samples.
[1148] Loading “Trance1”...
[1148] Copyright (C) David Olofson, 2002.
[1240] Done!
[1240] Loading “Test2”...
[1240] Copyright (C) David Olofson, 2002.
[1240] Done!
[1241] Waveform info:
[1241] ( 0: MIDI <Unknown>, 120 PPQN, 1 events)
[1241] 1: MONO16 ONESHOT, 32000 Hz, 64000 bytes (1.00 s)
[1241] 2: MONO16 ONESHOT, 24000 Hz, 144000 bytes (3.00 s)
[1241] 3: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 4: MONO16 ONESHOT, 16000 Hz, 12800 bytes (0.40 s)
[1241] 5: MONO16 ONESHOT, 16000 Hz, 22400 bytes (0.70 s)
[1241] 6: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 7: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 8: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 9: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 10: MONO16 ONESHOT, 24000 Hz, 192000 bytes (4.00 s)
[1241] 11: MONO16 ONESHOT, 32000 Hz, 48000 bytes (0.75 s)
[1241] 12: MONO16 ONESHOT, 32000 Hz, 48000 bytes (0.75 s)
[1241] 13: MONO16 ONESHOT, 32000 Hz, 48000 bytes (0.75 s)
[1241] 14: MONO16 ONESHOT, 24000 Hz, 48000 bytes (1.00 s)
[1241] 16: MONO16 ONESHOT, 33488 Hz, 66976 bytes (1.00 s)
[1241] 30: MONO16 ONESHOT, 33488 Hz, 66976 bytes (1.00 s)
[1241] 32: MONO16 LOOPED, 33488 Hz, 256 bytes (0.00 s)
[1241] 50: MONO16 ONESHOT, 32000 Hz, 64000 bytes (1.00 s)
[1241] 55: MONO16 ONESHOT, 32000 Hz, 64000 bytes (1.00 s)
[1241] 58: MONO16 ONESHOT, 8000 Hz, 16000 bytes (1.00 s)
[1241] 60: MONO16 ONESHOT, 32000 Hz, 16000 bytes (0.25 s)
[1241] 63: MONO16 ONESHOT, 32000 Hz, 32000 bytes (0.50 s)
[1241] 74: MONO16 LOOPED, 33488 Hz, 66976 bytes (1.00 s)
[1241] 84: MONO16 ONESHOT, 32000 Hz, 256000 bytes (4.00 s)
[1241] 86: MONO16 ONESHOT, 32000 Hz, 256000 bytes (4.00 s)
[1241] 87: MONO16 ONESHOT, 16000 Hz, 96000 bytes (3.00 s)
[1241] 102: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 103: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 104: MONO16 ONESHOT, 16000 Hz, 1600 bytes (0.05 s)
[1241] 105: MONO16 ONESHOT, 16000 Hz, 1600 bytes (0.05 s)
[1241] 106: MONO16 ONESHOT, 16000 Hz, 1600 bytes (0.05 s)
[1241] 107: MONO16 ONESHOT, 16000 Hz, 16000 bytes (0.50 s)
[1241] 108: MONO16 ONESHOT, 32000 Hz, 32000 bytes (0.50 s)
[1241] 109: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 110: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 111: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 112: MONO16 ONESHOT, 32000 Hz, 1600 bytes (0.03 s)
[1241] 113: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 114: MONO16 ONESHOT, 32000 Hz, 32000 bytes (0.50 s)
[1241] 115: MONO16 ONESHOT, 32000 Hz, 3200 bytes (0.05 s)
[1241] 116: MONO16 ONESHOT, 32000 Hz, 12800 bytes (0.20 s)
[1241] 117: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 118: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 119: MONO16 ONESHOT, 16000 Hz, 25600 bytes (0.80 s)
[1241] 120: MONO16 ONESHOT, 16000 Hz, 11000 bytes (0.34 s)
[1241] 121: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] (122: MIDI <Unknown>, 120 PPQN, 1 events)
[1241] 123: MONO16 ONESHOT, 48000 Hz, 48000 bytes (0.50 s)
[1241] 124: MONO16 ONESHOT, 48000 Hz, 96000 bytes (1.00 s)
[1242] 125: MONO16 ONESHOT, 32000 Hz, 64000 bytes (1.00 s)
[1242] 126: MONO16 ONESHOT, 32000 Hz, 96000 bytes (1.50 s)
[1242] 127: MONO16 ONESHOT, 32000 Hz, 32000 bytes (0.50 s)
[1242] Total 51 waveforms, total size: 2372184 bytes, total time: 36 s
[1881] No hiscore entries found!
Segmentation fault
[~]

PackagesAnyBug ReportLowLow[erlang-nox] uses "nox" suffixIn Progress
0%
Task Description

Description:

  • Fix package name to erlang-headless that is the correct name for packages without graphical user interface support. nox suffix is incorrect because Hyperbola supports Wayland too, not only X.Org.

Additional info:
* package version(s)

  • 19.3-3

* config and/or log files etc.

Steps to reproduce:

  • None
PackagesAnyBug ReportLowLow[qbittorrent-nox] uses "nox" suffixIn Progress
0%
Task Description

Description:

  • Fix package name to qbittorrent-headless that is the correct name for packages without graphical user interface support. nox suffix is incorrect because Hyperbola supports Wayland too, not only X.Org.

Additional info:
* package version(s)

  • 3.3.11-1

* config and/or log files etc.

Steps to reproduce:

  • None
ServicesGeneralFeature RequestVery LowLowhyperbola branding - add guidelines to packagesUnconfirmed
0%
Task Description

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

PackagesAnyFreedom IssueVery LowLow[recoll]: optional dependency: untex: for dvi support w...Unconfirmed
0%
Task Description

Upon installation of recoll, I can see:

optional dependency: untex: for dvi support with dvips

but untex cannot be installed

PackagesAnyPrivacy IssueVery LowLow[purple-plugin-pack] Provides Napster support which is ...Unconfirmed
0%
Task Description

purple-plugin-pack provides access to Napster which is only useful with a single company and sever (as far as I could tell).

PackagesAnyFeature RequestVery LowLow[newsboat] Package RequestUnconfirmed
0%
Task Description

Description: Newsboat is an ncursers RSS/Atom feedreader. RSS and Atom are a number of widely-used XML formats to transmit, publish and syndicate articles, for example news or blog articles. Newsboat is designed to be used on text terminals on Unix or Unix-like systems such as GNU/Linux, FreeBSD or macOS.

Newsboat is a fork of Newsbeuter. The only difference is that Newsboat is actively maintained while Newsbeuter isn’t.

Additional info: Official Website: https://newsboat.org/

License(s): custom: MIT

Version: newsboat 2.13-1
https://www.archlinux.org/packages/community/x86_64/newsboat/

Reason of Request Less bloat than Liferea and easy to maintenance. Sites news are more ethical and decentralized than read the “news” on centralized Social Networks (Bubbles).
https://en.wikipedia.org/wiki/Social_media_bubble

PackagesAnyImplementation RequestVery LowLow[mkv-extractor-qt] add packageAssigned
0%
Task Description

Could it be possible to add :

mkv-extractor-qt

“Graphical MKV demultiplexer”

https://aur.archlinux.org/packages/mkv-extractor-qt/

License: GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[vidcutter] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

vidcutter

“A modern, simple to use, constantly evolving and hella fast MEDIA CUTTER + JOINER w/ frame-accurate SmartCut technology + Qt5, libmpv, FFmpeg and MediaInfo powering the backend.”

License : GPL3

https://aur.archlinux.org/packages/vidcutter/

https://vidcutter.ozmartians.com/

PackagesAnyFreedom IssueVery LowLowSsleuth for IceapeUnconfirmed
0%
Task Description

5.4 version desired, it would be nice to still see the ciphers in Iceape.

PackagesAnyBackport RequestVery LowLowSelf Destructing Cookies for IceapeUnconfirmed
0%
Task Description

I would like this to be available for Iceape as well V4.13

PackagesAnyFreedom IssueVery LowLowEnigmail for IceapeUnconfirmed
0%
Task Description

this would be appreciated greatly, although I am in no hurry.

PackagesAnyBug ReportVery LowLowmarble-qt: doesn't look like a valid Marble plugin: "/...Unconfirmed
0%
Task Description

Description:

$ marble-qt –latlone=0.5,6.5
Ignoring to load the following file since it doesn’t look like a valid Marble plugin: “/usr/lib/marble/plugins/libWlocatePositionProviderPlugin.so” Reason: “Cannot load library /usr/lib/marble/plugins/libWlocatePositionProviderPlugin.so: (libwlocate.so: cannot open shared object file: No such file or directory)”

When package libwlocate is installed, it is not showing this error.

Shall that package be dependency?

PackagesAnyImplementation RequestVery LowLow[qarte] add packageUnconfirmed
0%
Task Description

Request for :

qarte

“Allow you to browse into the archive of arte+7 & arteLiveWeb sites and to record your prefered videos.”

https://aur.archlinux.org/packages/qarte

License : GPL3

PackagesAnyFeature RequestVery LowLowadd package powerkitUnconfirmed
0%
Task Description

https://github.com/rodlie/powerkit/releases

Version 1.0 requested

When you add Lumina desktop, add this package for sure. Although it is compatible with other desktops too. So it would be good to add it regardless.

PackagesAnyFreedom IssueVery LowLow[arm-unknown-linux-gnueabi-gcc] not working; needs prop...Unconfirmed
0%
Task Description

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don’t think “steps to reproduce” to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

PackagesAnyImplementation RequestLowLow[opmsg] add new packageResearching
0%
Task Description

Description: opmsg is a replacement for gpg which can encrypt/sign/verify your mails or create/verify detached signatures of local files. Even though the opmsg output looks similar, the concept is entirely different.

Additional info:
https://aur.archlinux.org/packages/opmsg/

PackagesStableBug ReportVery LowLow[autofs]: default configuration is /etc/auto.master ins...Unconfirmed
0%
Task Description

Description:

default configuration is /etc/auto.master instead of /etc/autofs/auto.master

admin→ sudo /usr/bin/automount -v -f -p /run/autofs.pid
Starting automounter version 5.1.2, master map /etc/auto.master
using kernel protocol version 5.02
lookup(file): file map /etc/auto.master missing or not readable
no mounts in table

PackagesStableImplementation RequestVery LowLow[codelite] Adding new packageUnconfirmed
0%
Task Description

The IDE codelite is an excellent development environment, continuously updated, has a clear vision and active support.
Would be nice to have this one within the repositories in upcoming releases, perhaps 0.5?

PackagesAnyBug ReportVery LowLowXenocara xbacklight bugUnconfirmed
0%
Task Description

When i try to set the brightness on my screen, with xbacklight -set 100,

it does this:

No outputs have backlight property

and it doesn’t really matter if I set it lower than 100 or what it currently is at.

Fix when you can please!

PackagesAnyFreedom IssueVery LowLow[hedgewars] Crash when starting a new singleplayer-camp...Unconfirmed
0%
Task Description

When trying to start a new campaign the complete game-engine is crashing with the following message:

Object::disconnect: Unexpected null parameter
QCoreApplication::postEvent: Unexpected null receiver

As ghc and fpc should be removed in the near future it would be good to validate this or otherwise remove the game-package itself also.

PackagesAnyImplementation RequestVery LowLow[chdkptp] please add package to reposUnconfirmed
0%
Task Description

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. Requires root privileges to connect to a camera.

ServicesFlyspray IssueSecurity IssueVery LowLowAfter account confirmation, crypt: No salt parameter wa...Unconfirmed
0%
Task Description

After confirming the newly created account (typing the confirmation code, the passwoard and its confirmation, and clicking the button to continue), the following error appears:

  Notice: crypt(): No salt parameter was specified. You must use a randomly generated salt and a strong hash function to produce a secure hash. in /srv/http/flyspray/includes/class.flyspray.php on line 656 

The account login seems to work normaly.

ServicesMail Service IssueFeature RequestVery LowLowSupport RFC 3461: Delivery Status Notifications (DSNs)Unconfirmed
0%
Task Description

The RFC 3461 would allow Hyperbola email accounts to request the destination email providers to point out if an email was successfully delivered.

It might not cover all transport failures, but at least has a chance to know in advance whether the message was delivered, discarding the events that happen afterwards (be it to the main inbox or subject to filtering rules such as moving to other folder, marking as spam or deleted after receipt).

ServicesPunBB IssueBug ReportVery LowLowhyperbola forum smtp error and profile updateUnconfirmed
0%
Task Description

here i will report 2 issues and one change to make
issues:
1- there is a failed smtp error with post and reply
2- in the forum profile one cant add website with .xyz domain name

the change:
1- with pgp key one would add a short key link just like what was mentioned in here:
https://forums.hyperbola.info/viewtopic.php?pid=2639#p2639

PackagesAnyFreedom IssueVery LowLowCan 123.hp.com/setup help me to fix HP Printer error co...Unconfirmed
0%
Task Description

You will see this code on the control panel of the printer while you are trying to scan. It might show up when you try to scan some heavy book or documents. There is no need to worry as you can fix it easily by following these simple steps from 123.hp.com/setup:

  • Turn on the printer and wait till it is in an idle state
  • Remove the printer from the power supply and wait for a minute or so
  • Plug the cables back and reconnect the power cord utility to the back part of the printer and switch it on
  • Let it pass through the warm up stage and wait till the light on the printer blinks. This will fix the issue and try putting one sheet at a time in the scanner

If you still face any issue then just visit 123.hp.com/setup and get help instantly from the experts.

PackagesTestingImplementation RequestVery LowLow[Hyperbola GNU/Linux-libre 0.4] [polygen{,-data}] Add p...Unconfirmed
0%
Task Description

Is that package worth using to generate every sentence of any kind?

Polygen:

Software DevelopmentGeneralFeature RequestMediumLow[Website] Rework for the onion-pageUnconfirmed
0%
Task Description

As proposed in a separate thread (https://forums.hyperbola.info/viewtopic.php?id=573): The navigation-bar needs a rework when accessing the website about the onion-protocol.

PackagesAnyFeature RequestVery LowVery Low[ttf-iosevka] add Iosevka fontDeferred
0%
Task Description

Iosevka wins a poll about most beautiful fonts on reddit (/r/linux). This font is very similar than Droid Sans (Official Google Font) with many advantages:

1 - Has 5 types modes (lightest, light, normal, bold, super bold)
2 - Condensed and big sizes (perfect for visual impairments users)
3 - Very Legible on i3-wm, Sway, Conky bar
4 - OTF license (Freedom license)

Iosevka is already on AUR, but create a official package prevent bug or proprietary third parties apps (Yaourt, etc) be installed by beginners Hyperbola users.

Official Site:
https://github.com/be5invis/Iosevka

On AUR:
https://aur.archlinux.org/packages/ttf-iosevka

PackagesAnyFeature RequestVery LowVery LowDreamchess package wantedUnconfirmed
0%
Task Description

this package is under gpl3. It is the most reasonable chess game because it can be easy or hard depending on your preference.

Software DevelopmentIceweasel-UXPBackport RequestVery LowVery LowRequest browser add-on: FireGesturesUnconfirmed
0%
Task Description

Name: FireGestures
Version: 1.11.1 (compatible Firefox version 52)
Source code: Github
Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.

https://github.com/gomita/firegestures/

https://addons.mozilla.org/en-US/firefox/addon/firegestures/

PackagesAnyBackport RequestVery LowVery LowIcetray for Iceape-uxpAssigned
0%
Task Description

This already works for it, but I just thought I would request it to be put in.

PackagesStableBug ReportVery LowVery Low[spamassassin] has different directory permissions than...Deferred
0%
Task Description

Description:
The /usr/sbin directory in spamassassin has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/spamassassin/PKGBUILD#n88

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing spamassassin, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* spamassassin 3.4.2-1.hyperbola2

PackagesStableBug ReportVery LowVery Low[postfix] has different directory permissions than 'fil...Deferred
0%
Task Description

Description:
The /usr/sbin directory in postfix has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/postfix/PKGBUILD#n115

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing postfix, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* postfix-3.2.2-1.hyperbola6

PackagesStableBug ReportVery LowVery Low[fail2ban] update dovecot failregex to support verbose ...Unconfirmed
0%
Task Description

Description:
The /etc/fail2ban/filter.d/dovecot.conf file has a failregex with the following:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user\s*$

and works with things like:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user

but with verbosity enabled in Dovecot, this output looks like this:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user (given password: password)

and in this case it doesn’t work, but it does if we fix the failregex if we replace it with:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user( \(given password: \S*\))?\s*$

with this new expression, it works with and without verbosity

And regarding postfix, to make it work correctly I “backported” some pieces from newest failregex:

/etc/fail2ban/postfixr-rbl.conf:

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: [45]54 [45]\.7\.1 Service unavailable; Client host \[\S+\] blocked using .* from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

/etc/fail2ban/postfix.conf: (second failregex)

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: 45[04] 4\.7\.1 Client host rejected: cannot find your (reverse )?hostname, (\[\S*\]); from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

I can create a patch if you want. Note that I haven’t tested all filters, some others may also need some rework

Additional info:
* fail2ban-0.9.6-2.hyperbola3

Showing tasks 351 - 385 of 385 Page 8 of 8<<First - 4 - 5 - 6 - 7 - 8

Available keyboard shortcuts

Tasklist

Task Details

Task Editing