|
Packages | Any | Security Issue | Very Low | Medium | [patch] CVE-2018-6951 - NULL pointer DoS | Assigned | |
Task Description
An issue was discovered in GNU patch through 2.7.6. There is a segmentation fault, associated with a NULL pointer dereference, leading to a denial of service in the intuit_diff_type function in pch.c, aka a “mangled rename” issue.
https://security-tracker.debian.org/tracker/CVE-2018-6951
|
|
Packages | Any | Security Issue | Medium | Medium | [openssh] CVE-2018-15919 | Researching | |
Task Description
Remotely observable behavior in auth-gss2.c in OpenSSH through 7.8 could be used by remote attackers to detect existence of users on a target system when GSS2 is in use. NOTE: the discoverer states ‘We understand that the OpenSSH developers do not want to treat such a username enumeration (or “oracle”) as a vulnerability.’ https://security-tracker.debian.org/tracker/CVE-2018-15919
|
|
Packages | Any | Bug Report | Very Low | Medium | [openrc] cannot load fuse at boot | Unconfirmed | |
Task Description
I added <quote>modules=”fs-fuse”</quote> to /etc/conf.d/modules (and also “fuse” instead).
I looked in /var/log/rc.log and I see this line
<quote>modprobe: FATAL: Module fs-fusetun not found in directory /lib/modules/4.9.194-gnu-1-lts</quote>
It looks like modprobe added “tun” to the filename which prevents loading the module.
|
|
Packages | Any | Implementation Request | Very Low | Medium | [nnn] package request | Unconfirmed | |
Task Description
This is a request to package nnn - a full-featured terminal file manager for low-end devices and the regular desktop.
nnn is available on Debian, Ubuntu (and family), Fedora, OpenSUSE and Arch Linux.
Homepage: https://github.com/jarun/nnn License: BSD 2-Clause
I would highly appreciate if nnn can be added to the repository.
|
|
Packages | Stable | Bug Report | Very Low | Medium | [nfs-utils] missing idmapd.conf | Unconfirmed | |
Task Description
Hello,
When mounting an NFS share, I get a warning about missing idmpad.conf
rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...
Debian includes a default config file for idmap :
[General]
Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain
[Mapping]
Nobody-User = nobody
Nobody-Group = nogroup
|
|
Packages | Any | Implementation Request | Medium | Medium | [ncdu] add new package | Deferred | |
Task Description
PKGBUILD
# $Id: PKGBUILD 187611 2016-08-26 15:44:01Z bisson $
# Contributor: lp76 <l.peduto@gmail.com>
# Contributor: Daenyth <Daenyth+Arch AT gmail DOT com>
# Maintainer: Gaetan Bisson <bisson@archlinux.org>
pkgname=ncdu
pkgver=1.12
pkgrel=1.hyperbola1
pkgdesc='Disk usage analyzer with an ncurses interface'
url='https://dev.yorhel.nl/ncdu'
license=('custom:MIT')
depends=('ncurses')
arch=('i686' 'x86_64')
validpgpkeys=('74460D32B80810EBA9AFA2E962394C698C2739FA')
source=("https://dev.yorhel.nl/download/${pkgname}-${pkgver}.tar.gz"{,.asc})
sha512sums=('20620dd79d2af878442769e097f13806f64f23875dcb85ebccd573a3de43aba5663d496049b64015d13f9a79d624298032c008ef61dfb6f61d8b12902b8dca12'
'SKIP')
build() {
cd "${srcdir}/${pkgname}-${pkgver}"
./configure --prefix=/usr
make
}
package() {
cd "${srcdir}/${pkgname}-${pkgver}"
make DESTDIR="${pkgdir}" install
install -Dm644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}
|
|
Packages | Any | Freedom Issue | Very Low | Medium | [mongodb] needs OpenRC init script | Unconfirmed | |
Task Description
Description: needs OpenRC init script
Additional info: * mongodb-3.4.3-1
|
|
Packages | Any | Feature Request | Very Low | Medium | [minidlna] remove systemd file and add openrc support | Unconfirmed | |
Task Description
Description:
minidlna lacks openrc support and includes a systemd file
Additional info: none
Steps to reproduce:
$ sudo pacman -S minidlna $ cat /usr/lib/systemd/system/minidlna.service
|
|
Packages | Any | Implementation Request | Very Low | Medium | [midori] please re-add new releases | Unconfirmed | |
Task Description
The security issues regarding the package which led to the package’s removal from Hyperbola (old WebKit and Vala dependency) have apparently been resolved in recent releases, see the new comment in this bug report and the latest PKGBUILD in Arch’s repo.
https://launchpad.net/bugs/1698483
https://www.archlinux.org/packages/community/x86_64/midori/
|
|
Packages | Any | Implementation Request | Very High | Medium | [mediagoblin] add GNU MediaGoblin package | Unconfirmed | |
Task Description
Description:
Additional info:
Steps to reproduce:
|
|
Packages | Any | Bug Report | Very Low | Medium | [mate-panel] country flags for keyboard layouts are mis... | Unconfirmed | |
Task Description
After enabling show-flags via dconf-editor in org.mate.peripherals-keyboard-xkb.indicator the flags don’t show up. The simple workaround is to copy flags you want into ~/.icons/flags (after creating the directory) from here
https://github.com/linuxmint/flags/tree/master/usr/share/iso-flag-png
and then to reboot.
It seems to be this bug:
https://askubuntu.com/questions/1059324/how-to-show-current-keyboard-layout-on-mate-panel-as-country-flag/1059325#1059325
|
|
Packages | Any | Bug Report | Medium | Medium | [lxmusic]package needs rebuilding as it fails to run | In Progress | |
Task Description
Rebuilt version (using PKGBUILD from Arch) works fine. Same is true for lxmusic-gtk3 (which the PKGBUILD also builds).
https://git.archlinux.org/svntogit/community.git/tree/trunk?h=packages/lxmusic
|
|
Packages | Any | Update Request | Very Low | Medium | [lmms] update package version to 1.2.0 | Unconfirmed | |
Task Description
In the latest version, it has many more changes with new and improvement features, and fixes function issues since released as preview stage in every eight times per three years ago[1]. And also it is possible to rebuild package with sndio.
[1]: https://github.com/LMMS/lmms/releases/ (see all sections below from 1.2.0-RC1 to 1.2.0 in the version history releases)
|
|
Packages | Stable | Bug Report | Medium | Medium | [linux-libre-lts] [i915] Display freeze : hpd interrupt... | Deferred | |
Task Description
Hello,
I recently acquired a T400 Thinkpad with 1440×900 panel. On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.
Both Thinkpad are running the same Hyperbola installation :
Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf) Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message) video driver : modesetting DE : xfce4 with xfwm4
On the Thinkpad x200, everything works great, no issue to report.
On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :
hpd interrupt storm detected on connector hdmi-a-1
And the display (and sound) freezes for 10 seconds (sometimes more !)
As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.
Results :
With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo. With 4.16.8 : Issue is not present ! No more freeze !
I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series. Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.
Thanks for your help
|
|
Packages | Stable | Bug Report | Medium | Medium | [libusb] error when mounting USB memories on virtual ma... | Researching | |
Task Description
## Bug ##
libusb: error [_get_usbfs_fd] libusb couldn’t open USB device /dev/bus/usb/003/003: permission denied libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.
Reference links: https://askubuntu.com/questions/526962/libusb-couldnt-open-usb-device-dev-bus-usb-002-006-permission-denied-libusb
|
|
Packages | Stable | Bug Report | Very Low | Medium | [kodi-addons-visualization] addons don't work | Unconfirmed | |
Task Description
After installation, none of the addons is present in Kodi!
|
|
Packages | Any | Implementation Request | Very Low | Medium | [i3-gaps] Add new package | Unconfirmed | |
Task Description
Description: i3-gaps is a fork of i3 that properly implements gaps.
Additional info: It is implemented in the AUR https://www.archlinux.org/packages/community/x86_64/i3-gaps/ and it’s source is available on github: https://github.com/Airblader/i3
|
|
Packages | Any | Drop Request | Very Low | Medium | [hardening-wrapper] deprecated, not needed anymore | Unconfirmed | |
Task Description
According to : https://github.com/thestinger/hardening-wrapper-deprecated
Wrapper scripts for building hardened executables by default (deprecated, replaced by standard Arch Linux toolchain changes)
|
|
Packages | Any | Drop Request | Medium | Medium | [gksu] is replaced and has to be deleted from our pacma... | Researching | |
Task Description
Description: From the author’s webpage gksu has been replaced.
Additional info: * package version(s) : extra/gksu 2.0.2-5
http://www.nongnu.org/gksu/
|
|
Packages | Any | Implementation Request | Very Low | Medium | [gitea] self-hosted git service | Assigned | |
Task Description
Description:
A nice Git service would be welcomed in our pacman.
- https://github.com/go-gitea/gitea
- https://www.archlinux.org/packages/community/x86_64/gitea/
|
|
Packages | Stable | Security Issue | Very Low | Medium | [git] Multiple CVEs | Unconfirmed | |
Task Description
CVE-2020-5260 has been fixed very recently in Debian, so I thought I would apply this patch. However, I found out that security patches have not been applied for quite a while (I could account for at least 6 CVEs).
Considering that the version in Debian stretch (2.11.0) is the nearest version with security patches released by Debian and that git project oldest supported version is 2.17, I have used patches from Debian stretch to apply on 2.12.2 currently in Milky Way.
But I have the following error on check():
| *** prove ***
|
| Test Summary Report
| -------------------
| t5570-git-daemon.sh (Wstat: 256 Tests: 20 Failed: 10)
| Failed tests: 3-7, 15-19
| Non-zero exit status: 1
| t5811-proto-disable-git.sh (Wstat: 256 Tests: 26 Failed: 16)
| Failed tests: 2-6, 9-11, 15-19, 21-23
| Non-zero exit status: 1
| Files=769, Tests=14137, 1101 wallclock secs ( 8.08 usr 1.12 sys + 144.48 cusr 63.42 csys = 217.10 CPU)
| Result: FAIL
| make[1]: *** [Makefile:45: prove] Error 1
| make[1]: Leaving directory '/build/git/src/git-2.12.2/t'
| make: *** [Makefile:2291: test] Error 2
| ==> ERROR: A failure occurred in check().
| Aborting...
This does not seem to be related to my change as the current version in Milky Way produces the same error (IOW the package currently in Milky Way is not rebuidable).
|
|
Packages | Stable | Implementation Request | Very Low | Medium | [gcc] Renew to version 8 or 9, including multilib | Deferred | |
Task Description
As even the support for GCC 7 is now ending with the release of version 7.5 (https://gcc.gnu.org/ml/gcc/2019-11/msg00099.html) I’d like to propose a renewal of the building-stack - which I think is also needed in time. Also a renewal of the glibc would be good at all!
|
|
Packages | Any | Implementation Request | Very Low | Medium | [foxtrotgps] please add package to repos | Unconfirmed | |
Task Description
Unlike other mapping software (gnome-maps, emerillon) it does not depend on geoclue/geoclue2 (or on kde packages like marble). The package was added to Arch’s official repos over a year ago. Their PKGBUILD builds fine.
|
|
Packages | Any | Bug Report | Very Low | Medium | [ffmpegthumbnailer] missing support for some media form... | Unconfirmed | |
Task Description
ffmpegthumbnailer does not support some media formats since they do not appear in its configuration file ffmpegthumbnailer.thumbnailer which can be found in /usr/share/thumbnailers/. By editing the file ffmpegthumbnailer.thumbnailer one can add thumbnail support for embedded art in audio formats such as flac and mp3 (using the -m flag) and thumbnail support for webp (a new image format which iceweasel-uxp and gthumb support). I’m attaching my edited file (I just added a few common audio formats and webp and added the -m flag and removed the -f flag).
|
|
Packages | Stable | Bug Report | Very Low | Medium | [fail2ban] uses old /usr/bin/sendmail location when it ... | Unconfirmed | |
Task Description
Description:
I saw errors in logs because fail2ban couldn’t find /usr/bin/sendmail, and discovered this:
[/etc/fail2ban] [0]
$ grep /usr/bin/sendmail */*
action.d/sendmail-buffered.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-geoip-lines.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipjailmatches.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipmatches.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-lines.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-matches.conf: Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
Please, also check for other binaries with wrong locations
As of now, the solution is as simple as removing this line → https://git.hyperbola.info:50100/packages/community.git/tree/fail2ban/PKGBUILD#n79
Additional info: * fail2ban-0.9.6-2.hyperbola3
|
|
Packages | Stable | Bug Report | Very Low | Medium | [fail2ban] remove systemd integration | Unconfirmed | |
Task Description
Description: This package has a strong systemd integration. It has a systemd backend to get files modifications:
(from /etc/fail2ban/jail.conf)
# systemd: uses systemd python library to access the systemd journal.
# Specifying "logpath" is not valid for this backend.
# See "journalmatch" in the jails associated filter config
and many files at /etc/fail2ban/filter.d have systemd stuff
[/etc/fail2ban/filter.d] [0]
$ grep -i systemd *
dovecot.conf:#journalmatch = _SYSTEMD_UNIT=dovecot.service
ejabberd-auth.conf:# Notes.: systemd journalctl style match filter for journal based backend
postfix.conf:journalmatch = _SYSTEMD_UNIT=postfix.service
postfix-sasl.conf:#journalmatch = _SYSTEMD_UNIT=postfix.service
pure-ftpd.conf:journalmatch = _SYSTEMD_UNIT=pure-ftpd.service + _COMM=pure-ftpd
recidive.conf:journalmatch = _SYSTEMD_UNIT=fail2ban.service PRIORITY=5
sshd.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
sshd-ddos.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
Additional info: * fail2ban-0.9.6-2.hyperbola3
|
|
Packages | Any | Bug Report | Very Low | Medium | [exfat-utils] filesystem can only be mounted manually | Unconfirmed | |
Task Description
One can mount exfat by running commands such as “sudo modprobe fuse” and “sudo mount.exfat /dev/sdc1 /mnt/storage” but it is inconvenient.
Also, loading fuse at startup is problematic - see here:
https://issues.hyperbola.info/index.php?do=details&task_id=1433
|
|
Packages | Any | Implementation Request | Very Low | Medium | [etherpad-lite] add package | Unconfirmed | |
Task Description
Hi,
Would be nice to add etherpad-lite to our pacman.
https://github.com/ether/etherpad-lite
https://aur.archlinux.org/packages/etherpad-lite/
|
|
Packages | Any | Feature Request | Medium | Medium | [epiphany] restore the hidden setting to disable JavaSc... | Researching | |
Task Description
Please restore the hidden setting (which can be enabled via dconf-editor) to disable JavaScript, which was removed last year (see here for details: https://github.com/GNOME/epiphany/blob/master/NEWS ). Please do not remove the browser from the repos, as it renders this website correctly, unlike Mozlla based browsers (see here for more info: https://issues.hyperbola.info/index.php?do=details&task_id=131). The browser also provides other functions currently unavailable in Mozilla browsers, such as accessing LibreCMC router’s non-SSL web interface.
|
|
Packages | Testing | Bug Report | Medium | Medium | [emacs] crush after sway | Researching | |
Task Description
I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:
1. Run sway 2. Exit sway or killall sway 3. Try running emacs on console, there will be crush 4. log out, log in, and emacs will work on console again
Yet it should not crush.
|
|
Packages | Any | Update Request | Medium | Medium | [cups] update request | Assigned | |
Task Description
New versión v2.2.7
References:
|
|
Packages | Any | Bug Report | Low | Medium | [cryptsetup] when dmcrypt start, the "/" filesystem, m... | Assigned | |
Task Description
When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:
* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...
These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password. Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.
|
|
Packages | Any | Bug Report | Low | Medium | [cryptsetup] can't umount luks filesystem on reboot/shu... | Assigned | |
Task Description
dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:
* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
Device foobar-pv is still in use [ !! ]
|
|
Packages | Stable | Bug Report | Very Low | Medium | [cowsay] perl-text-charwidth dependency missing | Unconfirmed | |
Task Description
cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency
Error message :
“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14. BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”
After installing perl-text-charwidth, it works fine.
|
|
Packages | Any | Implementation Request | Very High | Medium | [coturn] add new package | Unconfirmed | |
Task Description
Description:
Additional info:
Steps to reproduce:
|
|
Packages | Any | Bug Report | Very Low | Medium | [clamtk] Gtk-WARNING **: Impossible to find the theme e... | Assigned | |
Task Description
Additional info: * package version
Repositorio : community
Nombre : clamtk
Versión : 5.24-1
Descripción : Easy to use, light-weight, on-demand virus scanner for Linux
systems
Arquitectura : any
URL : https://dave-theunsub.github.io/clamtk/
Licencias : GPL
Grupos : Nada
Provee : Nada
Depende de : clamav perl gtk2-perl perl-locale-gettext perl-libwww
perl-http-message perl-lwp-protocol-https perl-text-csv
perl-json python zenity desktop-file-utils gnome-icon-theme
cron
Dependencias opcionales : Nada
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 179,90 KiB
Tamaño de la instalación : 1378,00 KiB
Encargado : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación : sáb 19 nov 2016 20:25:20 -05
Validado por : Suma MD5 Suma SHA-256 Firma
* config and/or log files etc.
$ clamtk Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.
Steps to reproduce:
* Install clamtk in all version
|
|
Packages | Any | Security Issue | Medium | Medium | [cinepaint] unmaintained and unsupportable | In Progress | |
Task Description
Remove “cinepaint” package since it’s unmaintained and unsupportable. Also, it doesn’t contains any file format support in the latest version (previous version supported multiple file formats).
I suggest use Krita (or Gimp 2.10) to edit 16bit and 32bit file formats or convert with imagemagick/graphicsmagick.
$ pacman -Si cinepaint
Repository : community
Name : cinepaint
Version : 1:1.0.4-5
Description : Sophisticated graphics manipulation programm supporting > 8bit pictures
Architecture : x86_64
URL : http://www.cinepaint.org
Licenses : LGPL GPL MIT
Groups : None
Provides : None
Depends On : gtk2 openexr lcms libxpm fltk ftgl libxxf86vm
Optional Deps : python2: for python plug-ins
gutenprint: for print plug-ins
ghostscript: for pdf plug-ins
Conflicts With : None
Replaces : None
Download Size : 3.75 MiB
Installed Size : 13.91 MiB
Packager : Christian Hesse <arch@eworm.de>
Build Date : Thu 28 Apr 2016 05:17:05 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature
|
|
Packages | Any | Implementation Request | Very Low | Medium | [chdkptp] please add package to control Canon cameras | Unconfirmed | |
Task Description
CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.
Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.
Code is available via svn:
$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp
Copy chdkptp.sh and config.mk files to source tree then compile via make. chdkptp requires root privileges to connect to a camera.
|
|
Packages | Stable | Update Request | Very Low | Medium | [cantarell-fonts] update package version to 0.111 | Unconfirmed | |
Task Description
Prior version 0.0.25 and below are outdated.
Since version 0.100 and later, there are some changes being redesigned from scratch, added three new weights (including extra bold, light and thin) but not italic or oblique styles, AppStream metadata translations from contributors, and more.
See the version history releases for more details: https://gitlab.gnome.org/GNOME/cantarell-fonts/raw/master/NEWS
|
|
Packages | Any | Privacy Issue | Very Low | Medium | [avahi] avahi publishes the hostname by default | Unconfirmed | |
Task Description
By default, the ‘disable-publishing’ parameter in the [publish] section of avahi-daemon.conf is set to ‘no’, which can be seen in my opinion as a privacy issue as avahi broadcasts the hostname without the user’s consent even though this has been explicitly disabled in the settings of networkmanager.
|
|
Packages | Stable | Bug Report | Very Low | Medium | [arm-unknown-linux-gnueabi-gcc] not working; needs prop... | Unconfirmed | |
Task Description
Description: I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.
Additional info: * package version(s) - arm-unknown-linux-gnueabi-gcc - all versions
Steps to reproduce: I don't think "steps to reproduce" to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly
|
|
Packages | Any | Implementation Request | Very Low | Medium | [arm-linux-gnueabihf-gcc] add package | Unconfirmed | |
Task Description
Hello,
Could it be possible to add this package :
arm-linux-gnueabihf-gcc
“The GNU Compiler Collection (arm-linux-gnueabihf)”
Also requires :
arm-linux-gnueabihf-binutils (A set of programs to assemble and manipulate binary and object files) arm-linux-gnueabihf-glibc (GNU C Library)
https://aur.archlinux.org/packages/arm-linux-gnueabihf-gcc/
License : GPL
Thanks
|
|
Packages | Any | Feature Request | Defer | Medium | [aqemu] libertybsd is missing from installation list | Deferred | |
Task Description
aqemu only lists GNU/Linux and GNU/Hurd. Since LibertyBSD is also free it should also be added.
|
|
Packages | Any | Implementation Request | Very Low | Medium | [SPF][postfix] implement pypolicyd-spf and postfix-poli... | Unconfirmed | |
Task Description
Description: Hyperbola has the following SPF implementations: * libspf2 * perl-mail-spf * perl-mail-spf-query
However, none of them work out of the box with postfix. There’s postfix-policyd-spf-perl, which uses one the current perl implementations (perl-mail-spf), takes no time to build and all the dependencies are already satisfied with Hyperbola’s packages
Here I made a PKGBUILD that’s compliant with the packaging standards:
pkgname=postfix-policyd-spf-perl
pkgver=2.011
pkgrel=1
pkgdesc='Postfix SPF policy engine, written in Perl'
arch=(i686 x86_64)
url='https://launchpad.net/postfix-policyd-spf-perl/'
license=(GPL)
depends=(perl-mail-spf perl-netaddr-ip perl-sys-hostname-long)
source=("https://launchpad.net/postfix-policyd-spf-perl/trunk/${pkgver}/+download/${pkgname}-${pkgver}.tar.gz"{,.asc})
sha512sums=('22fc00bf74912056a67e937a460ac1fd878f1cb1a3bfa7b19bc5f1e6bc1c36d815dcf8c945e818d242ed5e72a6295bb0e1569446e06b09aefb2842993b8016ba'
'SKIP')
validpgpkeys=(E7729BFFBE85400FEEEE23B178D7DEFB9AD59AF1) # Scott Kitterman
package() {
cd "${pkgname}-${pkgver}"
install -Dm755 "${pkgname}" "${pkgdir}/usr/libexec/postfix/${pkgname}"
install -Dm644 CHANGES INSTALL README -t "${pkgdir}/usr/share/doc/${pkgname}"
install -Dm644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}
in the other hand, to give users the possibility of having more options, we could add pypolicyd-spf (AUR), which depends in pyspf (AUR) and other packages that Hyperbola has. In fact, ArchWiki talks about this implementation, but this might not be relevant.
|
|
Services | Flyspray Issue | Bug Report | Very Low | Medium | [Flyspray] long tags break the backend | Unconfirmed | |
Task Description
When I was adding this task, I put some long tags on it (html form allowed that) and got an error concerning too long tags field to fit in an sql datatype (max is 40 chars). Task got added anyway (just without tags). I didn’t know that and created it again.
|
|
Packages | Any | Feature Request | Medium | Medium | [DCPT500W] possible integration of drivers to cups on P... | Assigned | |
Task Description
Hi guys, I have ever run into a Brother brand printer model DCPT500W[0], and I have seen that the source code for the drivers under GPLv3 license is available.
I also see that there is a file brother_dcpt500w_printer_en.ppd, which is important for cups, which is why it may be necessary to integrate it into the cups, as long as the drivers are Libre.
[0]:https://download.brother.com/welcome/dlf101963/dcpt500w_cupswrapper_GPL_source_3.0.2-0.tar.gz
|
|
Packages | Any | Bug Report | Very Low | Medium | [ rtkit ] contains systemd unit files | Unconfirmed | |
Task Description
Description:
The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.
Additional info:
pacman -Ql rtkit rtkit /etc/ rtkit /etc/dbus-1/ rtkit /etc/dbus-1/system.d/ rtkit /etc/dbus-1/system.d/org.freedesktop.RealtimeKit1.conf rtkit /usr/ rtkit /usr/bin/ rtkit /usr/bin/rtkitctl rtkit /usr/lib/ rtkit /usr/lib/rtkit/ rtkit /usr/lib/rtkit/rtkit-daemon rtkit /usr/share/ rtkit /usr/share/dbus-1/ rtkit /usr/share/dbus-1/interfaces/ rtkit /usr/share/dbus-1/interfaces/org.freedesktop.RealtimeKit1.xml rtkit /usr/share/dbus-1/system-services/ rtkit /usr/share/dbus-1/system-services/org.freedesktop.RealtimeKit1.service rtkit /usr/share/licenses/ rtkit /usr/share/licenses/rtkit/ rtkit /usr/share/licenses/rtkit/COPYING rtkit /usr/share/licenses/rtkit/LICENSE rtkit /usr/share/man/ rtkit /usr/share/man/man8/ rtkit /usr/share/man/man8/rtkitctl.8.gz rtkit /usr/share/polkit-1/ rtkit /usr/share/polkit-1/actions/ rtkit /usr/share/polkit-1/actions/org.freedesktop.RealtimeKit1.policy
* package version(s) rtkit 0.11-1.hyperbola1
* config and/or log files etc.
Jun 26 10:41:50 gnu mtp-probe: checking bus 1, device 8: “/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4” Jun 26 10:41:50 gnu mtp-probe: bus: 1, device: 8 was not an MTP device Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory Jun 26 10:44:44 gnu pulseaudio[4401]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
Steps to reproduce:
|
|
Packages | Stable | Bug Report | Very Low | Medium | Untrsuted gpg key | Unconfirmed | |
Task Description
Description: There is an issue with Christian Rebischke key, i’ve tried to delete /etc/pacman.d/gnupg/ and repopulate it but it doesn’t fix the issue.
error: ascii: signature from “Christian Rebischke (Arch Linux Security Team-Member) Chris.Rebischke@archlinux.org” is unknown trust File /var/cache/pacman/pkg/ascii-3.15-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Steps to reproduce:
sudo pacman -S ascii
|
|
Services | HyperWeb | Bug Report | Very Low | Medium | The Mailling list don't work | Unconfirmed | |
Task Description
The Mailling list don't work : https://lists.hyperbola.info//mailman/listinfo/
|
|
Packages | Any | Implementation Request | Very Low | Medium | Support of MPTCP (Multipath TCP) on Hyperbola | Unconfirmed | |
Task Description
Patch for 4.9 : https://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch
AUR : https://aur.archlinux.org/packages/linux-mptcp/
|