All Projects

ProjectCategoryTask TypePrioritySeveritySummaryStatus  ascProgress
PackagesTestingBug ReportVery LowMedium[icu] needs to rebuild that should place genccode into ...Unconfirmed
0%
Task Description

Here is the problem with ICU where LibreOffice has refused to build without genccode, yet an output log results like this.

makepkg -CLfs:

-- snip --
checking for genccode... no
configure: error: 'genccode' not found in $PATH, install the icu development tool 'genccode'
Error running configure at ./autogen.sh line 299.
-- snip --

pacman -Ql icu:

-- snip --
icu /usr/sbin/
icu /usr/sbin/escapesrc
icu /usr/sbin/genccode
icu /usr/sbin/gencmn
icu /usr/sbin/gennorm2
-- snip --
PackagesTestingFeature RequestVery LowMedium[Hyperbola GNU/Linux-libre 0.4] [xorg-xdm] Replace the ...Unconfirmed
0%
Task Description

Few other distros like Debian, NetBSD, and OpenBSD have some own customized login screens, while right here, the actual distro didn’t. I suggest you replacing them for the following paths on the list to come up next package release, which I have three files attached below there.

/etc/X11/xdm:

  • Xresources
  • Xsetup_0

/usr/share/xdm/pixmaps:

  • hyperbola.xpm
  • xorg{,-bw}.xpm (removed as unused)
PackagesTestingBug ReportVery LowCriticalangband game Couldn't load the requested font. Unconfirmed
0%
Task Description

Description:
When run angband game, the emulator of terminal show me the next, at hyperbola v0.4 testing

[ user | 2021-10-23 | 06:05 ]
[/home/user] [0]
$ angband
angband: Couldn't load the requested font. (10x20)

Additional info:
* package version(s)
* config and/or log files etc.

Steps to reproduce:
- Install the package
- Run in terminal

Software DevelopmentIceweasel-UXPImplementation RequestDeferLowSwiftweasel-UXP theme for Iceweasel-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftweasel was a Firefox-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since there are users encouraging us develop a Palemoon-based application , and Swiftweasel contains non-trademarked graphics and logos, we could port Swiftweasel to UXP platform as theme for Iceweasel-UXP.

Software DevelopmentIcedove-UXPImplementation RequestDeferLowSwiftdove-UXP theme for Icedove-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftdove was a Thunderbird-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since FossaMail may potentially be revived on UXP in the future [0] and Swiftdove contains non-trademarked graphics and logos, we could port Swiftdove to UXP platform as theme for Icedove-UXP.

PackagesAnyFeature RequestDeferLow[php-imagick] add packageUnconfirmed
0%
Task Description

php-imagick is an optdepends for many PHP webapps like Nextcloud and Wordpress, would be good to have itin Hyperbola, Arch added it last year

PackagesAnyFeature RequestVery HighHigh[onioncat] needs OpenRC init scriptAssigned
0%
Task Description

Description:

  • needs OpenRC init script

Additional info:

  • onioncat 0.2.2.r578-1

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[umurmur] needs OpenRC init script and contains systemd...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd file

Additional info:

  • umurmur 0.2.16_a-6
umurmur /usr/lib/systemd/system/umurmur.service

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[prosody] needs OpenRC init script and contains systemd...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd files

Additional info:

  • prosody 1:0.10.r7198+.2fd20f372cb1+-2
prosody /usr/lib/systemd/system/prosody.service
prosody /usr/lib/sysusers.d/prosody.conf
prosody /usr/lib/tmpfiles.d/prosody.conf

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[unrealircd] needs OpenRC init script and contains syst...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd files

Additional info:

  • unrealircd 4.0.11-2
unrealircd /usr/lib/systemd/system/unrealircd.service
unrealircd /usr/lib/tmpfiles.d/unrealircd.conf

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[mcelog] needs OpenRC init script and contains systemd ...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd file

Additional info:

  • mcelog 1:148-1
mcelog /usr/lib/systemd/system/mcelog.service

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[bzr] needs OpenRC init script (bzr serve)Assigned
0%
Task Description

Description:

  • needs OpenRC init script (bzr serve), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

  • bzr 2.7.0-2
Note: needs a provide: bazaar

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[mercurial] needs OpenRC init scripts (hg serve and chg...Assigned
0%
Task Description

Description:

  • needs OpenRC init scripts (hg serve and chg server), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

  • mercurial 4.2-1
Note: needs a provide: hg

Steps to reproduce:

  • none
PackagesAnyImplementation RequestMediumMedium[uzem][uzebox] add uzem emulator and uzebox firmware pa...Assigned
0%
Task Description

Add “uzem” emulator and “uzebox” firmware packages[0][1].

It’s a emulator and firmware for fully free 8bit game console.

[0]:http://belogic.com/uzebox/index.asp (no https found)
[1]:https://github.com/Uzebox/uzebox

PackagesAnyFeature RequestMediumMedium[DCPT500W] possible integration of drivers to cups on P...Assigned
0%
Task Description

Hi guys, I have ever run into a Brother brand printer model DCPT500W[0], and I have seen that the source code for the drivers under GPLv3 license is available.

I also see that there is a file brother_dcpt500w_printer_en.ppd, which is important for cups, which is why it may be necessary to integrate it into the cups, as long as the drivers are Libre.

[0]:https://download.brother.com/welcome/dlf101963/dcpt500w_cupswrapper_GPL_source_3.0.2-0.tar.gz

PackagesTestingBug ReportMediumMedium[Hyperbola GNU/Linux 0.4] Problems with touch- / trackp...Assigned
0%
Task Description

Description: Not finally tested, only getting the logs from chat within here for better analysis later on. User reported that touchpad is not working for now with Hyperbola GNU/Linux 0.4. dmesg-messagelog:

[anonymous@anonymous ~]$ dmesg | grep pad
[ 4.766853] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 4.823723] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0×840300/0x2e800/0×0, board id: 3127, fw id: 8526786

PackagesAnyImplementation RequestLowLow[nut] add Network UPS Tools 2.7.x packageAssigned
0%
Task Description

Add “nut” package.

Useful for uninterruptible power supplies, power distribution units, solar controllers and servers power supply units.

PackagesAnyBug ReportLowMedium[cryptsetup] when dmcrypt start, the "/" filesystem, m...Assigned
0%
Task Description

When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:

* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...

These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password.
Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.

PackagesAnyBug ReportLowMedium[cryptsetup] can't umount luks filesystem on reboot/shu...Assigned
0%
Task Description

dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:

* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
Device foobar-pv is still in use                                              [ !! ]
PackagesAnyBug ReportVery LowLow[gimp] [gegl] Module '/usr/lib/gegl-0.3/lens-correct.so...Assigned
0%
Task Description

admin→ gimp IMG_20170909_153350828.jpg
GEGL-Message: Module ‘/usr/lib/gegl-0.3/lens-correct.so’ load error: liblensfun.so.1: cannot open shared object file: No such file or directory
GEGL-Message: Module ‘/usr/lib/gegl-0.3/matting-levin.so’ load error: libumfpack.so.5: cannot open shared object file: No such file or directory

(gimp:12519): GLib-GObject-WARNING **: g_object_set_valist: object class ‘GeglConfig’ has no property named ‘cache-size’

Those are errors I get when running Gimp.

PackagesAnyImplementation RequestVery LowMedium[gitea] self-hosted git service Assigned
0%
Task Description

Description:

A nice Git service would be welcomed in our pacman.

- https://github.com/go-gitea/gitea

- https://www.archlinux.org/packages/community/x86_64/gitea/

PackagesStableBug ReportVery LowVery LowGajim "Unable to run gpg - it may not be available" Assigned
0%
Task Description

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:


07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.


After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

PackagesAnyFeature RequestVery LowMediumRemove dependency of packages on pulseaudio/libpulseAssigned
0%
Task Description

Similar to systemd, pulseaudio or libpulse is forced upon users as many packages require it such as kodi, gnome-shell (and thus also gdm), ffmpeg, gst-plugins-good, simplescreenrecorder, clementine, empathy, seamonkey (iceape), fluidsynth, mumble and qemu, Most/all of these packages can probably be compiled with pulseaudio or libpulse as an optional dependency instead.

PackagesAnyBackport RequestVery LowVery LowIcetray for Iceape-uxpAssigned
0%
Task Description

This already works for it, but I just thought I would request it to be put in.

PackagesAnyBug ReportVery LowMedium[clamtk] Gtk-WARNING **: Impossible to find the theme e...Assigned
0%
Task Description

Additional info:
* package version

Repositorio               : community
Nombre                    : clamtk
Versión                   : 5.24-1
Descripción               : Easy to use, light-weight, on-demand virus scanner for Linux
                            systems
Arquitectura              : any
URL                       : https://dave-theunsub.github.io/clamtk/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : clamav  perl  gtk2-perl  perl-locale-gettext  perl-libwww
                            perl-http-message  perl-lwp-protocol-https  perl-text-csv
                            perl-json  python  zenity  desktop-file-utils  gnome-icon-theme
                            cron
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 179,90 KiB
Tamaño de la instalación  : 1378,00 KiB
Encargado                 : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación         : sáb 19 nov 2016 20:25:20 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ clamtk
Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.

Steps to reproduce:

* Install clamtk in all version

PackagesAnyBug ReportVery LowMedium[slim] login screen not displaying correctlyAssigned
0%
Task Description

It worked fine on the previous version of Hyperbola. The word user/username does not show up. A workaround is to wait 10 seconds and enter the username and click enter - then it will switch correctly to the password screen (otherwise you need to enter the username and password at least twice in order to successfully login).

PackagesAnyBug ReportVery LowCritical[system-config-printer] Impossible to print some pdfs (...Assigned
0%
Task Description

Hello,

I’m unable to print some pdfs on my Hyperbola 3.0 system.
Some background :

cups is installed, service enabled and working
system-config-printer is installed and my printer has been correctly added.

I can print most pdfs and text files but recently with a pdf, it fails to print it.* And system-config-printer returned the following error (see capture) :

Printer "EPSON XP-620-Series" requires the '/usr/lib/cups/filters/epson-escpr-wrapper' but it is not currently installed.

Currently, “epson-escpr-wrapper” is installed but it is in :

/usr/libexec/cups/filters/epson-escpr-wrapper

Looking at source code of system-config-printer, it expects that wrapper to be installed in “/usr/lib/” so I tried to symlink that “epson-escpr-wrapper” to “/usr/lib/cups/filters” but it doesn’t work..

*With a Debian system and the exact same configuration, the “problematic” pdf prints just fine so it is not an issue with the pdf.

PackagesAnyImplementation RequestVery LowLow[SafeEyes] add new packageAssigned
0%
Task Description

Safe Eyes is a program to manage breaks in front of the computer. It has many features that help us adapt it to our needs.

PackagesTestingBug ReportVery LowMedium[adwaita-icon-theme] Most symbolic icons look brokenly ...Assigned
0%
Task Description

As the title says, some affected symbolic icons look like on a screencap of the GTK3 Widget Factory we attached below.

PackagesAnyFeature RequestVery HighHigh[backuppc]: contains systemd filesResearching
0%
Task Description

Description:

Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)

community/backuppc 4.1.2-1 [installed]

   Enterprise-grade system for backing up Linux, Windows and MacOS PCs

* config and/or log files etc.

Additional info:

Steps to reproduce: install it

PackagesAnyFeature RequestVery HighHigh[gpsd]: contains systemd filesResearching
0%
Task Description

Since Hyperbola follows the Init Freedom Campaign, systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:
* package version(s)

extra/gpsd 3.16-3 [installed]

   GPS daemon and library to support USB/serial GPS devices

* config and/or log files etc.

Additional info:

Steps to reproduce: install it

PackagesStableFeature RequestVery HighHigh[hiawatha]: remove systemd files, provide openrcResearching
0%
Task Description

Description:

Hiawatha contains only systemd files.

It shall be removed and openrc shall be provided

PackagesAnyBug ReportMediumMedium[rxvt-unicode] rc-status command print "bug" tableResearching
0%
Task Description

If you do a command line rc-status on urxvt terminal, the name of the column of services are hidden. You will only see the status columns. Example:

Runlevel: default
  started  ]
  started  ]
  started  ]
  started  ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
  started  ]
  started  ]
  started  ]d
Dynamic Runlevel: manual
PackagesAnyFeature RequestMediumMedium[epiphany] restore the hidden setting to disable JavaSc...Researching
0%
Task Description

Please restore the hidden setting (which can be enabled via dconf-editor) to disable JavaScript, which was removed last year (see here for details: https://github.com/GNOME/epiphany/blob/master/NEWS ).
Please do not remove the browser from the repos, as it renders this website correctly, unlike Mozlla based browsers (see here for more info: https://issues.hyperbola.info/index.php?do=details&task_id=131). The browser also provides other functions currently unavailable in Mozilla browsers, such as accessing LibreCMC router’s non-SSL web interface.

PackagesAnyFeature RequestMediumLow[cinnamon] add elogind supportResearching
0%
Task Description

Cinnamon currently does not support elogind, and depends on systemd. A patch is needed to fix this issue.

PackagesTestingBug ReportMediumMedium[emacs] crush after swayResearching
0%
Task Description

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

PackagesAnySecurity IssueMediumMedium[openssh] CVE-2018-15919Researching
0%
Task Description

Remotely observable behavior in auth-gss2.c in OpenSSH through 7.8 could be used by remote attackers to detect existence of users on a target system when GSS2 is in use. NOTE: the discoverer states ‘We understand that the OpenSSH developers do not want to treat such a username enumeration (or “oracle”) as a vulnerability.’ https://security-tracker.debian.org/tracker/CVE-2018-15919

PackagesAnyDrop RequestMediumMedium[gksu] is replaced and has to be deleted from our pacma...Researching
0%
Task Description

Description:
From the author’s webpage gksu has been replaced.

Additional info:
* package version(s) : extra/gksu 2.0.2-5

http://www.nongnu.org/gksu/

PackagesAnyBug ReportMediumHigh[notmuch-mutt] missing requirementResearching
0%
Task Description

Description:
notmuch-mutt fails to compile without perl-mail-message which is missing in Hyperbola

Steps to reproduce:
Install notmuch-mutt and try `notmuch-mutt` at the command line. Then install `perl-mail-message` from Arch and try again.

PackagesAnySecurity IssueMediumCritical[libjpeg-turbo] CVE-2019-2201Researching
0%
Task Description

In generate_jsimd_ycc_rgb_convert_neon of jsimd_arm64_neon.S, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution in an unprivileged process with no additional execution privileges needed. User interaction is needed for exploitation

https://security-tracker.debian.org/tracker/CVE-2019-2201

Patch: https://github.com/libjpeg-turbo/libjpeg-turbo/issues/388

PackagesTestingBug ReportMediumMedium[Hyperbola GNU/Linux-libre 0.4] - Package [android-file...Researching
0%
Task Description

Application is not starting and needs therefore a rework.

PackagesAnyBug ReportLowLow[crystal] error build InvidiousResearching
0%
Task Description

Description:

crystal build src/invidious.cr –release

Error in src/invidious.cr:19: while requiring "kemal"

require "kemal"
^

in lib/kemal/src/kemal.cr:4: while requiring "./kemal/*"

require "./kemal/*"
^

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^~~~~~~~

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^

in macro 'property' expanded macro: macro_48177600:567, line 4:

   1.       
   2.         
   3.           
>  4.             @static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   5. 
   6.             def static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   7.               @static_headers
   8.             end
   9. 
  10.             def static_headers=(@static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil)
  11.             end
  12.           
  13.         
  14.       
  15.     

undefined constant File::Info

Additional info:
* package version(s)

Crystal 0.22.0 (2017-04-22) LLVM 4.0.0

Steps to reproduce:

PackagesAnyImplementation RequestLowLow[opmsg] add new packageResearching
0%
Task Description

Description: opmsg is a replacement for gpg which can encrypt/sign/verify your mails or create/verify detached signatures of local files. Even though the opmsg output looks similar, the concept is entirely different.

Additional info:
https://aur.archlinux.org/packages/opmsg/

InstallationGeneralFeature RequestVery LowLow[calamares] add graphical installer with FDE supportResearching
0%
Task Description

Package Request: https://github.com/calamares/calamares

Original Bug Report:
— I would also like to test the beta isos when they are ready through qemu. If it looks good I plan to fully install them onto my laptop. My libreboot x200.

I don’t know if I should make a separate feature for this, but xfce is a good stable desktop environment for such a choice. that and lxde.

Though lxde is going to die...

PackagesAnyBug ReportVery LowLow[zathura-pdf-poppler] unable to process apostrophes di...Researching
0%
Task Description

Description:
Something is wrong with the latest version packaged in Hyperbola. zathura-pdf-poppler is unable to process apostrophes displayed in pdf bookmarks.

Steps to reproduce:
Open any pdf file which has a summary included, then hit `Tab` to display the summary. Instead of apostrophes, zathura-pdf-poppler displays html entities while the output of zathura-pdf-mupdf is correct.

PackagesAnyPrivacy IssueVery LowLow[github] check github-related packagesResearching
0%
Task Description

We should check if the following packages run any non-free JS (like youtube-dl) or access a proprietary API:

- hub
- python-pygithub
- python2-pygithub

I haven’t check them, but they look fishy. Take it as a reminder, this is far from being urgent IMO.

PackagesStableBug ReportVery LowLowChemical uknown media typesResearching
50%
Task Description

I do not know how to solve this. Some of packages is causing this problem. I do not know which one.

Description:

(4/4) Updating the MIME type database...
Unknown media type in type ‘chemical/x-alchemy’ Unknown media type in type ‘chemical/x-cache’ Unknown media type in type ‘chemical/x-cactvs-ascii’ Unknown media type in type ‘chemical/x-cactvs-binary’ Unknown media type in type ‘chemical/x-cactvs-table’ Unknown media type in type ‘chemical/x-cdx’ Unknown media type in type ‘chemical/x-cdxml’ Unknown media type in type ‘chemical/x-chem3d’ Unknown media type in type ‘chemical/x-cif’ Unknown media type in type ‘chemical/x-cml’ Unknown media type in type ‘chemical/x-daylight-smiles’ Unknown media type in type ‘chemical/x-dmol’ Unknown media type in type ‘chemical/x-gamess-input’ Unknown media type in type ‘chemical/x-gamess-output’ Unknown media type in type ‘chemical/x-gaussian-input’ Unknown media type in type ‘chemical/x-gaussian-log’ Unknown media type in type ‘chemical/x-genbank’ Unknown media type in type ‘chemical/x-gulp’ Unknown media type in type ‘chemical/x-hin’ Unknown media type in type ‘chemical/x-inchi’ Unknown media type in type ‘chemical/x-inchi-xml’ Unknown media type in type ‘chemical/x-jcamp-dx’ Unknown media type in type ‘chemical/x-macromodel-input’ Unknown media type in type ‘chemical/x-mdl-molfile’ Unknown media type in type ‘chemical/x-mdl-rdfile’ Unknown media type in type ‘chemical/x-mdl-rxnfile’ Unknown media type in type ‘chemical/x-mdl-sdfile’ Unknown media type in type ‘chemical/x-mdl-tgf’ Unknown media type in type ‘chemical/x-mmcif’ Unknown media type in type ‘chemical/x-mol2’ Unknown media type in type ‘chemical/x-mopac-graph’ Unknown media type in type ‘chemical/x-mopac-input’ Unknown media type in type ‘chemical/x-mopac-out’ Unknown media type in type ‘chemical/x-msi-car’ Unknown media type in type ‘chemical/x-msi-hessian’ Unknown media type in type ‘chemical/x-msi-mdf’ Unknown media type in type ‘chemical/x-msi-msi’ Unknown media type in type ‘chemical/x-ncbi-asn1’ Unknown media type in type ‘chemical/x-ncbi-asn1-binary’ Unknown media type in type ‘chemical/x-ncbi-asn1-xml’ Unknown media type in type ‘chemical/x-pdb’ Unknown media type in type ‘chemical/x-shelx’ Unknown media type in type ‘chemical/x-vmd’ Unknown media type in type ‘chemical/x-xyz’ Unknown media type in type ‘all/all’ Unknown media type in type ‘all/allfiles’

PackagesAnySecurity IssueVery LowHigh[tigervnc] Multiple CVEResearching
0%
Task Description

https://www.openwall.com/lists/oss-security/2019/12/20/2

“This is a security release to fix a number of issues that were found by Kaspersky Lab. These issues affect both the client and server and could theoretically allow an malicious peer to take control over the software on the other side.”

PackagesTestingBug ReportHighCritical[Hyperbola GNU/Linux-libre 0.4] Problems with sndio fai...Requires Testing
90%
Task Description

There are issues with the current sndio-package as it seems not possible to get this to work with ALSA.

PackagesStableBug ReportMediumMedium[virt-install] ERROR '_OsVariant' object has no attribu...Requires Testing
100%
Task Description

Trying to create a VM using virt-install (1.4.1-2.hyperbola2)

virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'

This error shows up :
ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’

I can’t create the VM.

PS : Error is not present on Debian Stretch with virt-install 1.4.0-5

Thanks for your help.

Showing tasks 301 - 350 of 517 Page 7 of 11<<First - 5 - 6 - 7 - 8 - 9 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing