All Projects

ProjectCategoryTask TypePrioritySeveritySummaryStatusProgress  desc
PackagesAnyFreedom IssueVery LowLowDial helpline number to find solutions of cash app card...Unconfirmed
0%
Task Description

Seeing the cash app card balance is easy and quick. Are you getting an issue in knowing the balance? But, you need to ask your technical queries to the team of professionals for immediate technical guidance. Get a quick fix of every problem with the cash app by connecting with us.

https://www.cashapp-customerservice.com/blog/check-balance-on-cash-app-card/

PackagesAnyFreedom IssueVery LowLowGet Cash app customer service number to resuscitate the...Unconfirmed
0%
Task Description

If there is sincere to make a portion, in any case, you get that your record is closed. Exactly when you see it, it is very abnormal for you. Since it stops your all work. Along these lines, you need to endeavor to restore your record by putting all information. In case you regardless of everything get the same, contact the Cash app customer service number.

https://www.numbers-for-support.com/Cash-app

ServicesGeneralFreedom IssueVery LowLowWhy is my Epson printer offline?Unconfirmed
0%
Task Description

Do you ask yourself ‘why is my Epson printer offline’ even when it is turned on? If yes then you are in the right place as we are here to provide you a solution that will fix this issue.
If your printer is linked with an Ethernet cable then ensure that the cable is attached to the router and the printer in a proper manner. If you require an IP address then you can print a network configuration page.
If you are using a USB cable then you should check if it is loose or not. If you think that there is a problem with the USB cable then you can also connect it directly as an alternative to using a hub.
If it is a wireless connection then use the network configuration page to get the IP address and ensure that the printer and the system are both connected to one wifi connection.
https://www.printersupportpro.us/epson-printer-offline

ServicesGeneralFreedom IssueVery LowLowIssue with scanner bringing about Apple Pay to Cash App...Unconfirmed
0%
Task Description

An issue with the scanner is quite possibly the most well-known ones and can be settled in the event that you want to eliminate the Apple Pay to Cash App mistake by utilizing the strategies that you can without much of a stretch find in the assistance community or investigate visiting the technical support locales.

ServicesGeneralFreedom IssueVery LowLowWith cash app customer service, get details why I can’t...Unconfirmed
0%
Task Description

Trying to resolve it? Can’t add cash to cash app For this, avail our cash app technical support for making the issues be rectified instantly. The technical specialists are available around the clock for quick guidance of the cash app users. Users can take help from experts at any time.

PackagesAnyFreedom IssueVery LowLowFix interface issue while using elective send cash from...Unconfirmed
0%
Task Description

The association issue can be awkward as the applications are related with the bank. Thusly, if you can’t send cash from Paypal to Cash App in light of the association issue then you can notice a couple of chronicles to find the screw up and sort it out. You have another decision to contact uphold for help.
https://www.cashapp-customerservice.com/blog/send-money-from-paypal-to-cash-app/

PackagesAnyFreedom IssueVery LowLowHow do you unlock Yahoo account without phone number an...Unconfirmed
0%
Task Description

If you wish to unlock Yahoo account without phone number and email address, then you must go to the account recovery page of the Yahoo mail official site. Next, you are asked to enter your email address in the specified box and then click on the Continue tab. Next, you have to click on the Yes, send me the account key.
https://www.customercare-email.com/blog/unlock-my-yahoo-account/

PackagesAnyFreedom IssueVery LowLowFix Your Epson Printer Offline TroubleshootingUnconfirmed
0%
Task Description

Epson printer offline is the most common issue users might face. This error basically occurs due to low network, USB cable not connected properly, etc. I am a technician and have received this complaint from various customers. However, I have been tackling such issues from the past many years. This [https://www.epsonprintersupportnumber.com/blog/how-to-bring-an-offline-epson-printer-online/ Epson printer offline problem]] can easily be solved with a few steps. In case, you are also facing this error then you can get in touch with me. Your issue can be resolved instantly. I have high experience in the technical field and have been sorting out the issues of printer customers on a daily basis. If you want the instant fixing solution you can anytime connect with me and convey your printer issue. There is no restricted time and you can contact me anytime, 24*7. All you need to do is share the correct details of your printer model. You will instantly receive the fixing solution.

PackagesAnyFreedom IssueVery LowLowFix Your Epson Printer Offline TroubleshootingUnconfirmed
0%
Task Description

Epson printer offline is the most common issue users might face. This error basically occurs due to low network, USB cable not connected properly, etc. I am a technician and have received this complaint from various customers. However, I have been tackling such issues from the past many years. This [https://www.epsonprintersupportnumber.com/blog/how-to-bring-an-offline-epson-printer-online | Epson printer offline problem]] can easily be solved with a few steps. In case, you are also facing this error then you can get in touch with me. Your issue can be resolved instantly. I have high experience in the technical field and have been sorting out the issues of printer customers on a daily basis. If you want the instant fixing solution you can anytime connect with me and convey your printer issue. There is no restricted time and you can contact me anytime, 24*7. All you need to do is share the correct details of your printer model. You will instantly receive the fixing solution.

PackagesAnyFreedom IssueVery LowLowWhere To Go If Cash App Refund Problems Take Place?Unconfirmed
0%
Task Description

Sometimes, you accidently send money from your Cash app account to someone you don’t even know. However, you can’t get your money but there is a chance that you can request Cash App Refund to get your money refunded. Besides, if you are unable to fetch the right information about the same, you should visit the help section of the Cash app.
https://www.contact-customerservice.co/blog/cash-app-refund/

PackagesTestingBug ReportVery LowCritical[Hyperbola GNU/Linux-libre 0.4] Installation issue for ...Unconfirmed
0%
Task Description

Description: Problem with execution of “pacstrap /mnt base base-devel syslinux” from 0.3.1-chroot ISO-image with modified pacman.conf and mirrorlist for testing. There are errors for the packages “libxcrypt” and “man-pages” as both have “/usr/share/man/man3/crypt.3.gz” and “/usr”share/man/man3/crypt_r.3.gz” included.

PackagesTestingBug ReportVery LowCritical[Hyperbola GNU/Linux-libre 0.4] Installation for syslin...Unconfirmed
0%
Task Description

Description: Configuration file “syslinux.cfg” under /boot/syslinux/ has to be adjusted. Problem with kernel-images loaded and the concurrent booting device is per default configured to /dev/sda3. Kernel-images are named as “linux-libre” not “linux-libre-lts”.

PackagesAnyFreedom IssueVery LowLow[Hyperbola GNU/Linux-libre 0.4] No login after installa...Unconfirmed
0%
Task Description

Description: Installation with ISO-image of Hyperbola GNU/Linux-libre 0.3.1. Before execution of pacstrap the following files are changed:

/etc/pacman.conf → only to accept repositories ‘core’ and ‘extra’ /etc/pacman.d/mirrorlist → only to use testingrepositories from mirrors

After installation and further boot no login is possible from terminal (no x-server executed).

PackagesTestingBug ReportHighCritical[wpa_supplicant]: wireless connection does not workUnconfirmed
0%
Task Description

Description:

Wireless connection does not work

Additional info:
* package version(s)

- wpa_supplicant 2:2.9-1
- libressl 3.2.2-1

* config and/or log files etc.

Successfully initialized wpa_supplicant
OpenSSL: Failed to set cipher string 'DEFAULT@SECLEVEL=1'
SSL: Failed to initialize TLS context.
Failed to initialize EAPOL state machines.
nl80211: deinit ifname=wlp0s18f2u1 disabled_11b_rates=0

Steps to reproduce:

$ wpa_supplicant -B -i device-name -c <(wpa_passphrase “ssid” “psk”)

PackagesAnyBug ReportMediumCritical[ath9k-htc-firmware]: not workUnconfirmed
0%
Task Description

Description:

Ath9k wifi device not working, possibly bad compilation or issues with gcc

Additional info:
* package version(s)

- gcc-8.4.0-2
- ath9k-htc-firmware-1.4.0-8

* config and/or log files etc.

[    8.302952] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[    8.303011] usbcore: registered new interface driver ath9k_htc
[    8.303067] usb 1-1: Direct firmware load for ath9k_htc/htc_9271-1.4.0.fw failed with error -2
[    8.303073] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[    8.623141] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51008
[    9.683657] ath9k_htc 1-1:1.0: ath9k_htc: Target is unresponsive
[    9.683672] ath9k_htc: Failed to initialize the device

Steps to reproduce:

- Add wifi device with ath9k firmware, for example: TL-WN722N
- pacman -S ath9k-htc-firmware

PackagesStableBug ReportVery LowMediumnouveau_drv.so: undefined symbol: exaDriverAllocUnconfirmed
0%
Task Description

Any attempt to load Nouveau in X server results in the following error:

nouveau_drv.so: undefined symbol: exaDriverAlloc

Additional info

Steps to reproduce

  1. Stop the X server.
  2. Add a section such as the following to “/etc/X11/xorg.conf”:
    Section "Device"
      Identifier "Video card"
      Driver "nouveau"
      Option "Backlight" "nv_backlight"
    EndSection
  3. Start the X server.
PackagesTestingFeature RequestVery LowMedium[Hyperbola GNU/Linux-Libre 0.4] [lumina-core] Replace t...Unconfirmed
0%
Task Description

Also known as “Replace the distributor logo as the startup dialogue, and app menu and start button icons from generic” in the long title because of character limitation.

If the distributor logo icon isn’t present, simply insert it and link few others into the appropriate paths that I made and attached below there.

Here is the list of the paths you do:

/usr/share/icons/material-design-{dark,light}/scalable/places/:

  • distributor-logo.svg
  • distributor-logo-hyperbola.svg (symlink of * distributor-logo.svg)
  • start-here{,-hyperbola,-lumina}.svg (symlink of distributor-logo.svg)
PackagesTestingFreedom IssueVery LowCritical[Hyperbola GNU/Linux-libre 0.4] [lumina-core] has some ...Unconfirmed
0%
Task Description

The list contains some icons before being removed for displaying non-libre and trademark-related stuffs, which may infringe the GNU Free System Distribution Guidelines and Hyperbola Packaging Guidelines.

/usr/share/icons/material-design-{dark,light}/scalable/applications/:

  • Icons that are libre apps but has problematic issues:
    • nodejs.svg
    • npm.svg
    • umbraco.svg
  • Icons that are non-libre apps:
    • apple-finder.svg
    • apple-safari.svg
    • edge.svg
    • emby.svg
    • evernote.svg
    • google-chrome.svg
    • google-earth.svg
    • internet-explorer.svg (discontinued)
    • itunes.svg
    • jira.svg
    • opera.svg
    • plex.svg
    • quicktime.svg
    • skype.svg
    • slack.svg
    • steam.svg
    • teamviewer.svg
    • unity.svg
    • visualstudio.svg
    • whatsapp.svg
  • Icons that are non-libre games:
    • black-mesa.svg
    • minecraft.svg
  • Icons that are non-libre network services:
    • amazon.svg
    • appnet.svg (discontinued)
    • basecamp.svg
    • bing.svg
    • bitbucket.svg
    • blogger.svg
    • deviantart.svg
    • disqus.svg
    • dribbble.svg
    • dropbox.svg
    • ebay.svg
    • etsy.svg
    • facebook.svg
    • flattr.svg
    • foursquare.svg
    • github.svg
    • gmail.svg
    • google-drive.svg
    • google-maps.svg
    • google-photos.svg
    • google-play.svg
    • google-plus.svg (discontinued)
    • google-translate.svg
    • google-wallet.svg (discontinued, now as Google Pay)
    • instagram.svg
    • jsfiddle.svg
    • lastfm.svg
    • linkedin.svg
    • linode.svg
    • mixcloud.svg
    • onedrive.svg
    • pandora.svg
    • pinterest.svg
    • rdio.svg (discontinued)
    • reddit.svg
    • soundcloud.svg
    • spotify.svg
    • stackexchange.svg
    • stackoverflow.svg
    • telegram.svg
    • tumblr.svg
    • twitch.svg
    • twitter.svg
    • vimeo.svg
    • vine.svg (discontinued)
    • vk.svg
    • wechat.svg
    • xing.svg
    • yelp.svg
    • youtube.svg
  • Icons that are non-FSDG operating systems:
    • android.svg
    • ubuntu.svg
  • Icons that are non-libre operating systems:
    • apple-ios.svg
  • Icons that are trademarked brands and products:
    • apple.svg
    • beats.svg
    • blackberry.svg
    • dolby.svg
    • google.svg
    • google-cardboard.svg (discontinued)
    • google-glass.svg
    • microsoft.svg
    • playstation.svg
    • wii.svg (discontinued)
    • wiiu.svg (discontinued)
  • Icons that are trademarked characters:
    • clippy.svg (appearance from the Office Assistant part of M$ Office 97 to 2003)
PackagesTestingImplementation RequestVery LowLow[Hyperbola GNU/Linux-libre 0.4] [polygen{,-data}] Add p...Unconfirmed
0%
Task Description

Is that package worth using to generate every sentence of any kind?

Polygen:

PackagesAnyImplementation RequestMediumMedium[uzem][uzebox] add uzem emulator and uzebox firmware pa...Assigned
0%
Task Description

Add “uzem” emulator and “uzebox” firmware packages[0][1].

It’s a emulator and firmware for fully free 8bit game console.

[0]:http://belogic.com/uzebox/index.asp (no https found)
[1]:https://github.com/Uzebox/uzebox

PackagesAnyImplementation RequestLowLow[nut] add Network UPS Tools 2.7.x packageAssigned
0%
Task Description

Add “nut” package.

Useful for uninterruptible power supplies, power distribution units, solar controllers and servers power supply units.

PackagesAnyBug ReportLowMedium[cryptsetup] when dmcrypt start, the "/" filesystem, m...Assigned
0%
Task Description

When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:

* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...

These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password.
Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.

PackagesAnyBug ReportLowMedium[cryptsetup] can't umount luks filesystem on reboot/shu...Assigned
0%
Task Description

dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:

* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
Device foobar-pv is still in use                                              [ !! ]
PackagesAnyFeature RequestMediumMedium[DCPT500W] possible integration of drivers to cups on P...Assigned
0%
Task Description

Hi guys, I have ever run into a Brother brand printer model DCPT500W[0], and I have seen that the source code for the drivers under GPLv3 license is available.

I also see that there is a file brother_dcpt500w_printer_en.ppd, which is important for cups, which is why it may be necessary to integrate it into the cups, as long as the drivers are Libre.

[0]:https://download.brother.com/welcome/dlf101963/dcpt500w_cupswrapper_GPL_source_3.0.2-0.tar.gz

PackagesAnyUpdate RequestMediumMedium[cups] update requestAssigned
0%
Task Description

New versión v2.2.7

References:

PackagesAnyBug ReportVery LowLow[gimp] [gegl] Module '/usr/lib/gegl-0.3/lens-correct.so...Assigned
0%
Task Description

admin→ gimp IMG_20170909_153350828.jpg
GEGL-Message: Module ‘/usr/lib/gegl-0.3/lens-correct.so’ load error: liblensfun.so.1: cannot open shared object file: No such file or directory
GEGL-Message: Module ‘/usr/lib/gegl-0.3/matting-levin.so’ load error: libumfpack.so.5: cannot open shared object file: No such file or directory

(gimp:12519): GLib-GObject-WARNING **: g_object_set_valist: object class ‘GeglConfig’ has no property named ‘cache-size’

Those are errors I get when running Gimp.

PackagesAnyImplementation RequestVery LowMedium[gitea] self-hosted git service Assigned
0%
Task Description

Description:

A nice Git service would be welcomed in our pacman.

- https://github.com/go-gitea/gitea

- https://www.archlinux.org/packages/community/x86_64/gitea/

PackagesStableBug ReportVery LowVery LowGajim "Unable to run gpg - it may not be available" Assigned
0%
Task Description

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:


07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.


After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

PackagesAnyFeature RequestVery LowMediumRemove dependency of packages on pulseaudio/libpulseAssigned
0%
Task Description

Similar to systemd, pulseaudio or libpulse is forced upon users as many packages require it such as kodi, gnome-shell (and thus also gdm), ffmpeg, gst-plugins-good, simplescreenrecorder, clementine, empathy, seamonkey (iceape), fluidsynth, mumble and qemu, Most/all of these packages can probably be compiled with pulseaudio or libpulse as an optional dependency instead.

PackagesAnyFeature RequestVery HighHigh[onioncat] needs OpenRC init scriptAssigned
0%
Task Description

Description:

  • needs OpenRC init script

Additional info:

  • onioncat 0.2.2.r578-1

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[umurmur] needs OpenRC init script and contains systemd...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd file

Additional info:

  • umurmur 0.2.16_a-6
umurmur /usr/lib/systemd/system/umurmur.service

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[prosody] needs OpenRC init script and contains systemd...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd files

Additional info:

  • prosody 1:0.10.r7198+.2fd20f372cb1+-2
prosody /usr/lib/systemd/system/prosody.service
prosody /usr/lib/sysusers.d/prosody.conf
prosody /usr/lib/tmpfiles.d/prosody.conf

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[unrealircd] needs OpenRC init script and contains syst...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd files

Additional info:

  • unrealircd 4.0.11-2
unrealircd /usr/lib/systemd/system/unrealircd.service
unrealircd /usr/lib/tmpfiles.d/unrealircd.conf

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[mcelog] needs OpenRC init script and contains systemd ...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd file

Additional info:

  • mcelog 1:148-1
mcelog /usr/lib/systemd/system/mcelog.service

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[bzr] needs OpenRC init script (bzr serve)Assigned
0%
Task Description

Description:

  • needs OpenRC init script (bzr serve), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

  • bzr 2.7.0-2
Note: needs a provide: bazaar

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[mercurial] needs OpenRC init scripts (hg serve and chg...Assigned
0%
Task Description

Description:

  • needs OpenRC init scripts (hg serve and chg server), like [git] (git-daemon) and [subversion] (svnserve)

Additional info:

  • mercurial 4.2-1
Note: needs a provide: hg

Steps to reproduce:

  • none
PackagesAnySecurity IssueVery LowMedium[patch] CVE-2018-6951 - NULL pointer DoSAssigned
0%
Task Description

An issue was discovered in GNU patch through 2.7.6. There is a segmentation fault, associated with a NULL pointer dereference, leading to a denial of service in the intuit_diff_type function in pch.c, aka a “mangled rename” issue.

https://security-tracker.debian.org/tracker/CVE-2018-6951

PackagesAnyBackport RequestVery LowVery LowIcetray for Iceape-uxpAssigned
0%
Task Description

This already works for it, but I just thought I would request it to be put in.

PackagesStableBug ReportVery LowHigh[devede] xorriso unsupported option '-dvd-video'Assigned
0%
Task Description

Description:

Devede fails to convert transcoded videos to iso format with libburn-1.5.0.

Drive current: -outdev 'stdio:/home/heckyel/movie/movie.iso'
Media current: stdio file, overwriteable
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data,  334g free
xorriso : FAILURE : -as genisofs: Unsupported option '-dvd-video'
xorriso : NOTE : -return_with SORRY 32 triggered by problem severity FAI

Additional info:

$ pacman -Si devede
Repositorio               : community
Nombre                    : devede
Versión                   : 4.8.8-1
Descripción               : A program to create VideoDVDs and CDs
Arquitectura              : any
URL                       : http://www.rastersoft.com/programas/devede.html
Licencias                 : GPL3
Grupos                    : Nada
Provee                    : Nada
Depende de                : mencoder  ffmpeg  dvdauthor  vcdimager  cdrkit  ttf-dejavu
                            gtk3  python-cairo  python-gobject  python-setuptools
Dependencias opcionales   : mplayer
                            vlc
                            mpv
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1640,88 KiB
Tamaño de la instalación  : 3331,00 KiB
Encargado                 : Sergej Pupykin <pupykin.s+arch@gmail.com>
Fecha de creación         : vie 10 feb 2017 05:06:37 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Link’s code:

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/mkisofs.py#L61

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/genisoimage.py#L61

Steps to reproduce:

- Install devede
- Create video DVD disc

PackagesAnyBug ReportVery LowMedium[clamtk] Gtk-WARNING **: Impossible to find the theme e...Assigned
0%
Task Description

Additional info:
* package version

Repositorio               : community
Nombre                    : clamtk
Versión                   : 5.24-1
Descripción               : Easy to use, light-weight, on-demand virus scanner for Linux
                            systems
Arquitectura              : any
URL                       : https://dave-theunsub.github.io/clamtk/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : clamav  perl  gtk2-perl  perl-locale-gettext  perl-libwww
                            perl-http-message  perl-lwp-protocol-https  perl-text-csv
                            perl-json  python  zenity  desktop-file-utils  gnome-icon-theme
                            cron
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 179,90 KiB
Tamaño de la instalación  : 1378,00 KiB
Encargado                 : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación         : sáb 19 nov 2016 20:25:20 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ clamtk
Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.

Steps to reproduce:

* Install clamtk in all version

PackagesAnyBug ReportVery LowMedium[slim] login screen not displaying correctlyAssigned
0%
Task Description

It worked fine on the previous version of Hyperbola. The word user/username does not show up. A workaround is to wait 10 seconds and enter the username and click enter - then it will switch correctly to the password screen (otherwise you need to enter the username and password at least twice in order to successfully login).

PackagesAnyBug ReportVery LowCritical[system-config-printer] Impossible to print some pdfs (...Assigned
0%
Task Description

Hello,

I’m unable to print some pdfs on my Hyperbola 3.0 system.
Some background :

cups is installed, service enabled and working
system-config-printer is installed and my printer has been correctly added.

I can print most pdfs and text files but recently with a pdf, it fails to print it.* And system-config-printer returned the following error (see capture) :

Printer "EPSON XP-620-Series" requires the '/usr/lib/cups/filters/epson-escpr-wrapper' but it is not currently installed.

Currently, “epson-escpr-wrapper” is installed but it is in :

/usr/libexec/cups/filters/epson-escpr-wrapper

Looking at source code of system-config-printer, it expects that wrapper to be installed in “/usr/lib/” so I tried to symlink that “epson-escpr-wrapper” to “/usr/lib/cups/filters” but it doesn’t work..

*With a Debian system and the exact same configuration, the “problematic” pdf prints just fine so it is not an issue with the pdf.

PackagesAnyImplementation RequestVery LowLow[emacs-exwm] add packageAssigned
0%
Task Description

Some users use emacs as a tiling window manager. Please add EXWM[0]

[0]: https://github.com/ch11ng/exwm

PackagesAnyImplementation RequestVery LowLow[SafeEyes] add new packageAssigned
0%
Task Description

Safe Eyes is a program to manage breaks in front of the computer. It has many features that help us adapt it to our needs.

PackagesAnyPrivacy IssueVery LowCritical[bleachbit] needs to be adapted to UXP applicationsAssigned
0%
Task Description

The current version of BleachBit needs to be adapted so it can clean the new .cache/hyperbola/ directory.

PackagesAnySecurity IssueVery LowCritical[unbound] Multiple CVEsAssigned
0%
Task Description

https://ostif.org/our-audit-of-unbound-dns-by-x41-d-sec-full-results/

[Critical] https://security-tracker.debian.org/tracker/CVE-2019-18934

PackagesStableBug ReportVery LowCritical[smartmontools] update-smart-drivedb fails to updateAssigned
0%
Task Description

smartmontools 6.5-1.hyperbola1

Error while trying to update smart-drivedb :

anon@test[~] update-smart-drivedb

External Link/usr/bin/update-smart-drivedb: download from branches/RELEASE_6_5_DRIVEDB failed (curl: exit 23) /usr/bin/update-smart-drivedb: download from trunk failed (curl: exit 23)

PackagesTestingBug ReportHighCritical[Hyperbola GNU/Linux-libre 0.4] Problems with sndio fai...Assigned
0%
Task Description

There are issues with the current sndio-package as it seems not possible to get this to work with ALSA.

PackagesAnyBug ReportMediumMedium[rxvt-unicode] rc-status command print "bug" tableResearching
0%
Task Description

If you do a command line rc-status on urxvt terminal, the name of the column of services are hidden. You will only see the status columns. Example:

Runlevel: default
  started  ]
  started  ]
  started  ]
  started  ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
  started  ]
  started  ]
  started  ]d
Dynamic Runlevel: manual
PackagesAnyFeature RequestMediumMedium[epiphany] restore the hidden setting to disable JavaSc...Researching
0%
Task Description

Please restore the hidden setting (which can be enabled via dconf-editor) to disable JavaScript, which was removed last year (see here for details: https://github.com/GNOME/epiphany/blob/master/NEWS ).
Please do not remove the browser from the repos, as it renders this website correctly, unlike Mozlla based browsers (see here for more info: https://issues.hyperbola.info/index.php?do=details&task_id=131). The browser also provides other functions currently unavailable in Mozilla browsers, such as accessing LibreCMC router’s non-SSL web interface.

Showing tasks 301 - 350 of 520 Page 7 of 11<<First - 5 - 6 - 7 - 8 - 9 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing