All Projects

ProjectCategoryTask TypePriority  ascSeveritySummaryStatusProgress
PackagesAnyImplementation RequestVery LowLow[chdkptp] please add package to reposUnconfirmed
0%
Task Description

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. Requires root privileges to connect to a camera.

PackagesAnyPrivacy IssueVery LowMedium[avahi] avahi publishes the hostname by defaultUnconfirmed
0%
Task Description

By default, the ‘disable-publishing’ parameter in the [publish] section of avahi-daemon.conf is set to ‘no’, which can be seen in my opinion as a privacy issue as avahi broadcasts the hostname without the user’s consent even though this has been explicitly disabled in the settings of networkmanager.

PackagesAnyPrivacy IssueVery LowLow[purple-plugin-pack] Provides Napster support which is ...Unconfirmed
0%
Task Description

purple-plugin-pack provides access to Napster which is only useful with a single company and sever (as far as I could tell).

PackagesAnyPrivacy IssueVery LowLow[github] check github-related packagesResearching
0%
Task Description

We should check if the following packages run any non-free JS (like youtube-dl) or access a proprietary API:

- hub
- python-pygithub
- python2-pygithub

I haven’t check them, but they look fishy. Take it as a reminder, this is far from being urgent IMO.

PackagesAnyPrivacy IssueVery LowCritical[bleachbit] needs to be adapted to UXP applicationsAssigned
0%
Task Description

The current version of BleachBit needs to be adapted so it can clean the new .cache/hyperbola/ directory.

PackagesStableReplace RequestVery LowMediumPackage ossp has got systemd dependenciesUnconfirmed
0%
Task Description

Description: Concurrent package ossp in version 1.3.2-15 has got dependencies to systemd, which is contradicting the whole distribution and the used INIT-system. Therefore my request to port this to OpenRC!

Additional info:
* package version(s) 1.3.2-15

PackagesTestingReplace RequestVery LowMedium replace request: NetworkManager with wpa_cuteUnconfirmed
0%
Task Description

https://github.com/loh-tar/wpa-cute/releases

I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.

I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)

or 2019 january. :)

WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:

https://wiki.archlinux.org/index.php/Wpa_supplicant:

Password-related problems

wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.

In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:

# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf

In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed.
Problems with eduroam and other MSCHAPv2 connections

This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.

but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.

It says it cannot get the status of wpa_supplicant when I load it.

This could be an issue if you get rid of NetworkManager for some users.

So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)

PackagesAnySecurity IssueVery LowHigh[octopi] requires suUnconfirmed
0%
Task Description

would it be possible to make it use sudo instead?

From what I know, sudo is safer. Let me know if you agree this is a problem.

PackagesAnySecurity IssueVery LowMedium[patch] CVE-2018-6951 - NULL pointer DoSAssigned
0%
Task Description

An issue was discovered in GNU patch through 2.7.6. There is a segmentation fault, associated with a NULL pointer dereference, leading to a denial of service in the intuit_diff_type function in pch.c, aka a “mangled rename” issue.

https://security-tracker.debian.org/tracker/CVE-2018-6951

PackagesAnySecurity IssueVery LowMedium[qemu] Multiple CVEUnconfirmed
0%
Task Description

CVE-2018-20123 QEMU: pvrdma: memory leakage in device hotplug
https://www.openwall.com/lists/oss-security/2018/12/13/4

CVE-2018-16872 Qemu: usb-mtp: path traversal by host filesystem
manipulation in Media Transfer Protocol (MTP)
https://www.openwall.com/lists/oss-security/2018/12/13/11

Patches included at above URLs.

PackagesAnySecurity IssueVery LowMediumDownload debian-fixes instead of relying on external so...Unconfirmed
0%
Task Description

It happened already with minetest and again with prosody: When trying to build own packages with makepkg there are patches downloaded from the Debian-project. But the given HTTP(S)-sources are no longer available, concrete example within prosody to be found: https://deb.debian.org/debian/pool/main/p/prosody/prosody_0.10.2-1~bpo9+1.debian.tar.xz (not available)

Please don’t rely on those external sources when creating PKGBUILD-files or just give users the possibility for a secure and granted download. Therefore I cannot build prosody on my own now!

PackagesAnySecurity IssueVery LowCritical[unbound] Multiple CVEsAssigned
0%
Task Description

https://ostif.org/our-audit-of-unbound-dns-by-x41-d-sec-full-results/

[Critical] https://security-tracker.debian.org/tracker/CVE-2019-18934

PackagesStableSecurity IssueVery LowCritical[lts-kernel][sec] filter /dev/mem access & restrict acc...Unconfirmed
0%
Task Description

These two options could be enabled :

Kernel hacking → [*] Filter access to /dev/mem
[*] Filter I/O access to /dev/mem

Security options → [*] Restrict unprivileged access to the kernel syslog

PackagesAnySecurity IssueVery LowHigh[tigervnc] Multiple CVEResearching
0%
Task Description

https://www.openwall.com/lists/oss-security/2019/12/20/2

“This is a security release to fix a number of issues that were found by Kaspersky Lab. These issues affect both the client and server and could theoretically allow an malicious peer to take control over the software on the other side.”

PackagesAnySecurity IssueVery LowCritical[opensmtpd] CVE-2020-8794Unconfirmed
0%
Task Description

Description: https://www.openwall.com/lists/oss-security/2020/02/24/5 https://www.bleepingcomputer.com/news/security/new-critical-rce-bug-in-openbsd-smtp-server-threatens-linux-distros/

Qualys Security Advisory

LPE and RCE in OpenSMTPD’s default install (CVE-2020-8794)

Contents

Summary
Analysis
...
Acknowledgments

Summary

We discovered a vulnerability in OpenSMTPD, OpenBSD’s mail server. This
vulnerability, an out-of-bounds read introduced in December 2015 (commit
80c6a60c, “when peer outputs a multi-line response ...”), is exploitable
remotely and leads to the execution of arbitrary shell commands: either
as root, after May 2018 (commit a8e22235, “switch smtpd to new
grammar”); or as any non-root user, before May 2018.

Because this vulnerability resides in OpenSMTPD’s client-side code
(which delivers mail to remote SMTP servers), we must consider two
different scenarios:

- Client-side exploitation: This vulnerability is remotely exploitable

in OpenSMTPD's (and hence OpenBSD's) default configuration. Although
OpenSMTPD listens on localhost only, by default, it does accept mail
from local users and delivers it to remote servers. If such a remote
server is controlled by an attacker (either because it is malicious or
compromised, or because of a man-in-the-middle, DNS, or BGP attack --
SMTP is not TLS-encrypted by default), then the attacker can execute
arbitrary shell commands on the vulnerable OpenSMTPD installation.

- Server-side exploitation: First, the attacker must connect to the

OpenSMTPD server (which accepts external mail) and send a mail that
creates a bounce. Next, when OpenSMTPD connects back to their mail
server to deliver this bounce, the attacker can exploit OpenSMTPD's
client-side vulnerability. Last, for their shell commands to be
executed, the attacker must (to the best of our knowledge) crash
OpenSMTPD and wait until it is restarted (either manually by an
administrator, or automatically by a system update or reboot).

We developed a simple exploit for this vulnerability and successfully
tested it against OpenBSD 6.6 (the current release), OpenBSD 5.9 (the
first vulnerable release), Debian 10 (stable), Debian 11 (testing), and
Fedora 31.

The fix is delivered in OpenSMTPD 6.6.4p1, available here, which the developer recommends installing “AS SOON AS POSSIBLE.”

PackagesStableSecurity IssueVery LowMedium[git] Multiple CVEsUnconfirmed
0%
Task Description

CVE-2020-5260 has been fixed very recently in Debian, so I thought I would apply this patch. However, I found out that security patches have not been applied for quite a while (I could account for at least 6 CVEs).

Considering that the version in Debian stretch (2.11.0) is the nearest version with security patches released by Debian and that git project oldest supported version is 2.17, I have used patches from Debian stretch to apply on 2.12.2 currently in Milky Way.

But I have the following error on check():

 |  *** prove ***
 |
 |  Test Summary Report
 |  -------------------
 |  t5570-git-daemon.sh                              (Wstat: 256 Tests: 20 Failed: 10)
 |    Failed tests:  3-7, 15-19
 |    Non-zero exit status: 1
 |  t5811-proto-disable-git.sh                       (Wstat: 256 Tests: 26 Failed: 16)
 |    Failed tests:  2-6, 9-11, 15-19, 21-23
 |    Non-zero exit status: 1
 |  Files=769, Tests=14137, 1101 wallclock secs ( 8.08 usr  1.12 sys + 144.48 cusr 63.42 csys = 217.10 CPU)
 |  Result: FAIL
 |  make[1]: *** [Makefile:45: prove] Error 1
 |  make[1]: Leaving directory '/build/git/src/git-2.12.2/t'
 |  make: *** [Makefile:2291: test] Error 2
 |  ==> ERROR: A failure occurred in check().
 |      Aborting...

This does not seem to be related to my change as the current version in Milky Way produces the same error (IOW the package currently in Milky Way is not rebuidable).

ServicesFlyspray IssueSecurity IssueVery LowLowAfter account confirmation, crypt: No salt parameter wa...Unconfirmed
0%
Task Description

After confirming the newly created account (typing the confirmation code, the passwoard and its confirmation, and clicking the button to continue), the following error appears:

  Notice: crypt(): No salt parameter was specified. You must use a randomly generated salt and a strong hash function to produce a secure hash. in /srv/http/flyspray/includes/class.flyspray.php on line 656 

The account login seems to work normaly.

PackagesAnySecurity IssueVery LowMediummount.davfs: unknown file system davfs due to paths cha...Unconfirmed
0%
Task Description

This is same issue as on:
https://bugzilla.redhat.com/show_bug.cgi?id=1151273

The paths changed and trying to mount davfs file system defined in /etc/fstab fails with error: unknown file system davfs

To remedy, I made symlink in /sbin to mount.davfs

The transition of paths had to take that in account as many mounted remote disks failed after upgrade.

PackagesAnyUpdate RequestVery LowHigh[proj]: please update to latest versionUnconfirmed
0%
Task Description

Description:

https://proj4.org/index.html

This package have valuable geodetic applications, and I intend to present Hyperbola GNU/Linux-libre soon in universities and schools in East Africa.

The coordinate system there is not WGS84 and this package only in new version is providing the conversion from East African geographic coordinates to WGS84, and will be very usable in many industrial and private applications.

PackagesStableUpdate RequestVery LowMedium[cantarell-fonts] update package version to 0.111Unconfirmed
0%
Task Description

Prior version 0.0.25 and below are outdated.

Since version 0.100 and later, there are some changes being redesigned from scratch, added three new weights (including extra bold, light and thin) but not italic or oblique styles, AppStream metadata translations from contributors, and more.

See the version history releases for more details: https://gitlab.gnome.org/GNOME/cantarell-fonts/raw/master/NEWS

PackagesAnyUpdate RequestVery LowMedium[lmms] update package version to 1.2.0Unconfirmed
0%
Task Description

In the latest version, it has many more changes with new and improvement features, and fixes function issues since released as preview stage in every eight times per three years ago[1]. And also it is possible to rebuild package with sndio.

[1]: https://github.com/LMMS/lmms/releases/ (see all sections below from 1.2.0-RC1 to 1.2.0 in the version history releases)

PackagesAnyUpdate RequestVery LowHigh[mpv] request for package bumpUnconfirmed
0%
Task Description

Hello,

Would it be possible to get a package bump for mpv ?

Currently, Debian Buster (stable) uses 0.29.1-1. This would be great as it introduces many fixes and support for lua scripts I heavily use.
0.29.* requires a ffmpeg to 4.x series as well.

Thanks.

PackagesStableUpdate RequestVery LowLow[icewm] Upgrade package versionUnconfirmed
0%
Task Description

The current version of the package icewm within the Hyperbola-repositories is 1.3.8. The latest version is 1.6.3!
An update would be helpful as this window-manager follows absolutely the principles of the distribution Hyperbola itself, being simple and fast.

PackagesStableUpdate RequestVery LowMedium[varnish] Missing init scriptUnconfirmed
0%
Task Description

Description:

Init script is missing for this package.

I think has some systemd dependecies.

/tmp/alpm_sYmHUS/.INSTALL: line 7: systemd-sysusers: command not found
error: command failed to execute correctly

package version: varnish-5.1.2-1

PackagesAnyBug ReportLowMedium[cryptsetup] when dmcrypt start, the "/" filesystem, m...Assigned
0%
Task Description

When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:

* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...

These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password.
Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.

PackagesAnyBug ReportLowMedium[cryptsetup] can't umount luks filesystem on reboot/shu...Assigned
0%
Task Description

dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:

* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
Device foobar-pv is still in use                                              [ !! ]
PackagesAnyBug ReportLowLow[usbutils] lsusb does not list device namesIn Progress
0%
Task Description

Description:

lsusb does not resolve device names from /var/lib/usbutils/usb.ids

The same thing as described here: https://unix.stackexchange.com/questions/220759/lsusb-doesnt-list-device-names

PackagesAnyBug ReportLowLow[erlang-nox] uses "nox" suffixIn Progress
0%
Task Description

Description:

  • Fix package name to erlang-headless that is the correct name for packages without graphical user interface support. nox suffix is incorrect because Hyperbola supports Wayland too, not only X.Org.

Additional info:
* package version(s)

  • 19.3-3

* config and/or log files etc.

Steps to reproduce:

  • None
PackagesAnyBug ReportLowLow[qbittorrent-nox] uses "nox" suffixIn Progress
0%
Task Description

Description:

  • Fix package name to qbittorrent-headless that is the correct name for packages without graphical user interface support. nox suffix is incorrect because Hyperbola supports Wayland too, not only X.Org.

Additional info:
* package version(s)

  • 3.3.11-1

* config and/or log files etc.

Steps to reproduce:

  • None
PackagesStableBug ReportLowMediumGarbled display with xfce4-terminal (terminfo)Unconfirmed
0%
Task Description

A very nasty bug I wasn’t able to find an answer to.
I compiled stuff (buildroot) using menuconfig, the menu display was fine in xfce4-terminal (See screenshot #1)
I restarted the config a few days later with the same command :

$ make menuconfig

and this time the display was messed up (See screenshot #2)

After investigation, I noticed a directory (filled with stuff) have been created in my home folder :

.terminfo

I don’t know why. But anyway, if I delete it, then the display is ok again.
I noticed that if I use good old xterm terminal, then the display is fine even if the .terminfo directory is present. (it uses “xterm” instead of xterm-256color)

But, with xfce4-terminal (and others, I tried with gnome-terminal, sakura..), the display is messed up if the .terminfo directory is present in my home folder.

I also noticed that if I run the command in a screen session, the issue is not present.

(I open xfce4-terminal)

$ screen
$ printenv TERM
screen.xterm-256color
$ make menuconfig (or htop, or other program using ncurses)

= display ok

but with default :

(I open xfce4-terminal)

$ printenv TERM
xterm-256color
make menuconfig (or htop, or other program using ncurses)

= display messed up if .terminfo directory is present

So I have no idea why this .terminfo directory is generated. What could trigger its generation ? Is that an issue with ncurses or something else ?

Thanks for your help

PackagesAnyBug ReportLowLow[crystal] error build InvidiousResearching
0%
Task Description

Description:

crystal build src/invidious.cr –release

Error in src/invidious.cr:19: while requiring "kemal"

require "kemal"
^

in lib/kemal/src/kemal.cr:4: while requiring "./kemal/*"

require "./kemal/*"
^

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^~~~~~~~

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^

in macro 'property' expanded macro: macro_48177600:567, line 4:

   1.       
   2.         
   3.           
>  4.             @static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   5. 
   6.             def static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   7.               @static_headers
   8.             end
   9. 
  10.             def static_headers=(@static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil)
  11.             end
  12.           
  13.         
  14.       
  15.     

undefined constant File::Info

Additional info:
* package version(s)

Crystal 0.22.0 (2017-04-22) LLVM 4.0.0

Steps to reproduce:

PackagesAnyBug ReportLowHigh[kaccounts-integration] option to add NextCloud/OwnClou...Unconfirmed
0%
Task Description

Description:

  • Option to add NextCloud/OwnCloud accounts in ‘Online Accounts’ section of System Settings not appearing.

Additional info:
* package version(s)

  • 17.04.0-1

* config and/or log files etc.

  • N/A

Steps to reproduce:

  • Run application
  • Go to ‘Online Accounts’ section of System Settings
PackagesAnyBug ReportLowHigh[kdenetwork-kopete] clicking to add an Jabber Account o...Unconfirmed
0%
Task Description

Description:

  • Clicking to add an Jabber Account opens a dialog with no fields to enter information.

Additional info:
* package version(s)

  • 17.04.0-3.hyperbola1

* config and/or log files etc.

  • N/A

Steps to reproduce:

  • Run Application
  • Clicking to add an Jabber Account
PackagesAnyBug ReportLowHigh[xfce4-power-manager] locking session issueRequires Testing
90%
Task Description

I probably should’ve mentioned this before, but if it is set to suspend when lid is closed, it should automatically lock. if the security option: lock screen with system is set to sleep is tweaked on it doesn’t lock always.

This is word for word what I wrote in the forums, but yeah... it is a problem say if someone wants to use your laptop without your permission and can do so.

But it is also a problem if you set it to lock instead because it is more prone to overheating when your not using it, and it doesn’t suspend quickly enough.

I have tried this many times and the same story can be told, again and again.

I think this issue should be considered high or critical merely because of the privacy risk if someone gets their hands on your laptop while its on. Even if you have been away... :/

I wonder if anyone else has this issue... well you guys will tell me I am sure. if critical doesn’t match what you think I am sure you will change it. ;)

PackagesAnyFeature RequestLowLow[scribus] missing hunspell supportUnconfirmed
0%
Task Description

I have noticed that the version of scribus that is available in hyperbola does not have the option of spelling correction and by references of the official scribus channel indicate that scribus has to be built with hunspell. I do not understand how that is done, I just need to be able to correct spelling from scribus.

PackagesAnyFeature RequestLowLow[npapi-vlc] package from git sourceUnconfirmed
0%
Task Description

Description: As mentioned in Bug #18, our VLC plugin was not maintained in some time and the deprecated addon was removed. However, upstream is actively working on the plugin as per: https://code.videolan.org/videolan/npapi-vlc/tree/master

We should build this from source and re-package.

Software DevelopmentHyperToolsImplementation RequestLowLow[hypertools] create libretools replacement for Hyperbol...Deferred
0%
Task Description

Create hypertools to replace libretools package for HyperbolaBSD and GNU/Linux

It’s long period to develop this package.
For now, a systemd-nspawn wrapper is being developed for “libretools”[0]

[0]:https://issues.hyperbola.info/index.php?do=details&task_id=86

PackagesAnyImplementation RequestLowLow[nut] add Network UPS Tools 2.7.x packageAssigned
0%
Task Description

Add “nut” package.

Useful for uninterruptible power supplies, power distribution units, solar controllers and servers power supply units.

PackagesTestingImplementation RequestLowMedium[spacefm] add new packageIn Progress
0%
Task Description

Add SpaceFM File Manager for Hyperbola

Aur Package: spacefm Debian Package: spacefm

PackagesAnyImplementation RequestLowLow[codecrypt] add new packageUnconfirmed
0%
Task Description

This is a GnuPG-like unix program for encryption and signing that uses only quantum-computer-resistant algorithms:

  McEliece cryptosystem (compact QC-MDPC variant) for encryption
  Hash-based Merkle tree algorithm (FMTSeq variant) for digital signatures

Codecrypt is free software. The code is licensed under terms of LGPL3 in a good hope that it will make combinations with other tools easier.

PackagesAnyImplementation RequestLowLow[opmsg] add new packageResearching
0%
Task Description

Description: opmsg is a replacement for gpg which can encrypt/sign/verify your mails or create/verify detached signatures of local files. Even though the opmsg output looks similar, the concept is entirely different.

Additional info:
https://aur.archlinux.org/packages/opmsg/

PackagesAnyReplace RequestLowLow[appmenu-qt4] replace with appmenu-qt (qt5)Deferred
0%
Task Description

“appmenu-qt4”[0][2] is a deprecated package (release in 2012)[1] and use qt4 unsupported/non-lts software[3], but “appmenu-qt5” not contains any release source code[2]

$ pacman -Si appmenu-qt4
Repository : community
Name : appmenu-qt4
Version : 0.2.6-1
Description : Export Qt4 applications menus over D-Bus
Architecture : x86_64
URL : https://launchpad.net/appmenu-qt Licenses : GPL Groups : None
Provides : None
Depends On : libdbusmenu-qt4
Optional Deps : None
Conflicts With : appmenu-qt
Replaces : appmenu-qt
Download Size : 16.55 KiB
Installed Size : 48.00 KiB
Packager : Antonio Rojas arojas@archlinux.org Build Date : Tue 28 Feb 2017 05:59:31 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature

[0]:https://launchpad.net/appmenu-qt (qt4)
[1]:https://launchpad.net/appmenu-qt/+download [2]:https://launchpad.net/appmenu-qt5 [3]:https://en.wikipedia.org/wiki/Qt_5.6_LTS

PackagesAnyBug ReportMediumMedium[rxvt-unicode] rc-status command print "bug" tableResearching
0%
Task Description

If you do a command line rc-status on urxvt terminal, the name of the column of services are hidden. You will only see the status columns. Example:

Runlevel: default
  started  ]
  started  ]
  started  ]
  started  ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
  started  ]
  started  ]
  started  ]d
Dynamic Runlevel: manual
PackagesStableBug ReportMediumMedium[libusb] error when mounting USB memories on virtual ma...Researching
0%
Task Description

## Bug ##

libusb: error [_get_usbfs_fd] libusb couldn’t open USB device /dev/bus/usb/003/003: permission denied libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.

Reference links: https://askubuntu.com/questions/526962/libusb-couldnt-open-usb-device-dev-bus-usb-002-006-permission-denied-libusb

PackagesStableBug ReportMediumMedium[linux-libre-lts] [i915] Display freeze : hpd interrupt...Deferred
0%
Task Description

Hello,

I recently acquired a T400 Thinkpad with 1440×900 panel.
On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.

Both Thinkpad are running the same Hyperbola installation :

Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf)
Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message)
video driver : modesetting
DE : xfce4 with xfwm4

On the Thinkpad x200, everything works great, no issue to report.

On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :

hpd interrupt storm detected on connector hdmi-a-1

And the display (and sound) freezes for 10 seconds (sometimes more !)

As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.

Results :

With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo.
With 4.16.8 : Issue is not present ! No more freeze !

I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series.
Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.

Thanks for your help

PackagesTestingBug ReportMediumMedium[emacs] crush after swayResearching
0%
Task Description

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

PackagesStableBug ReportMediumMedium[virt-install] ERROR '_OsVariant' object has no attribu...Requires Testing
100%
Task Description

Trying to create a VM using virt-install (1.4.1-2.hyperbola2)

virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'

This error shows up :
ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’

I can’t create the VM.

PS : Error is not present on Debian Stretch with virt-install 1.4.0-5

Thanks for your help.

PackagesAnyBug ReportMediumMedium[lxmusic]package needs rebuilding as it fails to runIn Progress
0%
Task Description

Rebuilt version (using PKGBUILD from Arch) works fine. Same is true for lxmusic-gtk3 (which the PKGBUILD also builds).

https://git.archlinux.org/svntogit/community.git/tree/trunk?h=packages/lxmusic

PackagesAnyBug ReportMediumHigh[notmuch-mutt] missing requirementResearching
0%
Task Description

Description:
notmuch-mutt fails to compile without perl-mail-message which is missing in Hyperbola

Steps to reproduce:
Install notmuch-mutt and try `notmuch-mutt` at the command line. Then install `perl-mail-message` from Arch and try again.

PackagesStableBug ReportMediumCritical[torsocks] which: no getcapRequires Testing
90%
Task Description

Current torsocks version is broken.
It returns the following error when attempting to torify application :

which: no getcap
Showing tasks 301 - 350 of 516 Page 7 of 11<<First - 5 - 6 - 7 - 8 - 9 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing