All Projects

ProjectCategoryTask TypePriority  ascSeveritySummaryStatusProgress
PackagesAnySecurity IssueVery LowHigh[tigervnc] Multiple CVEResearching
0%
Task Description

https://www.openwall.com/lists/oss-security/2019/12/20/2

“This is a security release to fix a number of issues that were found by Kaspersky Lab. These issues affect both the client and server and could theoretically allow an malicious peer to take control over the software on the other side.”

PackagesAnySecurity IssueVery LowCritical[opensmtpd] CVE-2020-8794Unconfirmed
0%
Task Description

Description: https://www.openwall.com/lists/oss-security/2020/02/24/5 https://www.bleepingcomputer.com/news/security/new-critical-rce-bug-in-openbsd-smtp-server-threatens-linux-distros/

Qualys Security Advisory

LPE and RCE in OpenSMTPD’s default install (CVE-2020-8794)

Contents

Summary
Analysis
...
Acknowledgments

Summary

We discovered a vulnerability in OpenSMTPD, OpenBSD’s mail server. This
vulnerability, an out-of-bounds read introduced in December 2015 (commit
80c6a60c, “when peer outputs a multi-line response ...”), is exploitable
remotely and leads to the execution of arbitrary shell commands: either
as root, after May 2018 (commit a8e22235, “switch smtpd to new
grammar”); or as any non-root user, before May 2018.

Because this vulnerability resides in OpenSMTPD’s client-side code
(which delivers mail to remote SMTP servers), we must consider two
different scenarios:

- Client-side exploitation: This vulnerability is remotely exploitable

in OpenSMTPD's (and hence OpenBSD's) default configuration. Although
OpenSMTPD listens on localhost only, by default, it does accept mail
from local users and delivers it to remote servers. If such a remote
server is controlled by an attacker (either because it is malicious or
compromised, or because of a man-in-the-middle, DNS, or BGP attack --
SMTP is not TLS-encrypted by default), then the attacker can execute
arbitrary shell commands on the vulnerable OpenSMTPD installation.

- Server-side exploitation: First, the attacker must connect to the

OpenSMTPD server (which accepts external mail) and send a mail that
creates a bounce. Next, when OpenSMTPD connects back to their mail
server to deliver this bounce, the attacker can exploit OpenSMTPD's
client-side vulnerability. Last, for their shell commands to be
executed, the attacker must (to the best of our knowledge) crash
OpenSMTPD and wait until it is restarted (either manually by an
administrator, or automatically by a system update or reboot).

We developed a simple exploit for this vulnerability and successfully
tested it against OpenBSD 6.6 (the current release), OpenBSD 5.9 (the
first vulnerable release), Debian 10 (stable), Debian 11 (testing), and
Fedora 31.

The fix is delivered in OpenSMTPD 6.6.4p1, available here, which the developer recommends installing “AS SOON AS POSSIBLE.”

PackagesAnyImplementation RequestVery LowMedium[chdkptp] please add package to control Canon camerasUnconfirmed
0%
Task Description

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. chdkptp requires root privileges to connect to a camera.

PackagesAnyImplementation RequestVery LowLow[chdkptp] please add package to reposUnconfirmed
0%
Task Description

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. Requires root privileges to connect to a camera.

PackagesAnyFreedom IssueVery LowHighSynergy en teclado en español no tiene tildes ni ñUnconfirmed
0%
Task Description

Description:
Share a single mouse and keyboard between multiple computers, with libressl and OpenRC support

Issue:
Synergy no es capas de trasmitir tildes ni eñes y demás caracteres del español españa

Additional info:
* package version(s): community/synergy 1.8.8-2.hyperbola1
* config and/or log files etc.

Steps to reproduce:
instalarar synergy en 2 PCs con hyperbola 0.3, he intentar escribir tildes, no funcionará...

PackagesAnyBackport RequestVery LowLow elogind packageUnconfirmed
0%
Task Description

Description:
Was wondering if there is any issue in terms of freedom andor privacy for the inclusion of elogind? Feedback will be apreciated Cheers.

this was recently implemented in gentoo.

source:
https://libregit.org/i3_relativism/elogind

references:
https://blogs.gentoo.org/leio/2019/03/26/gnome-3-30/#comment-9555 https://forums.gentoo.org/viewtopic-t-1094796.html

contact gentoo developer for help in implementation:
https://wiki.gentoo.org/wiki/User:Leio/TODO

PackagesAnySecurity IssueVery LowMediummount.davfs: unknown file system davfs due to paths cha...Unconfirmed
0%
Task Description

This is same issue as on:
https://bugzilla.redhat.com/show_bug.cgi?id=1151273

The paths changed and trying to mount davfs file system defined in /etc/fstab fails with error: unknown file system davfs

To remedy, I made symlink in /sbin to mount.davfs

The transition of paths had to take that in account as many mounted remote disks failed after upgrade.

PackagesAnyFreedom IssueVery LowLowJuniper Networks Certified Expert SecurityUnconfirmed
0%
Task Description

The Juniper Networks Certified Expert Security (JNCES) is aimed to authorize the networking experts’ ability to deploy, implement, manage and fix JUNOS-based security platforms. The Juniper certified security professionals have the capability to deploy manage, configure and troubleshoot the junos for the businesses.

PackagesAnyFreedom IssueVery LowLowHow to resolve QuickBooks Error 15241Unconfirmed
0%
Task Description

We work closely as a reliable third party QuickBooks support provider, which helps all frustrated QuickBooks users. We’ve the potential to affect minor or major QuickBooks error codes smartly. If you’re facing QuickBooks error 15241 on a day to day, you need to call our certified QuickBooks support team immediately. This error code relates to QuickBooks payroll function that forestalls QuickBooks desktop software to place within the updates correctly. Our live QuickBooks experts have full knowledge and extensive experience to identify the foremost reasons of this error code and apply the suitable techniques to unravel this error code within a few of seconds. https://www.quickbookssupportphonenumber247.co/blog/resolve-quickbooks-error-15241/

PackagesAnyFreedom IssueVery LowLowWhat are the easy tips to setup yahoo mail in outlook?Unconfirmed
0%
Task Description

Outlook can become the best app that gives the excellent performance with the unique and amazing features. It provides many more benefits over the webmail of yahoo email account. So, I have decided to setup yahoo mail in outlook. I have never done this procedure, so I am not sure about the setup procedure. I don’t have complete technical knowledge to setup yahoo mail in MS outlook, so I want to take full guidance to setup yahoo mail in outlook. So anyone can share the easy tips to setup yahoo mail in MS outlook.

PackagesAnyFreedom IssueVery LowLowFix QuickBooks Error 6147 in 5 Tricky WaysUnconfirmed
0%
Task Description

I am into a critical accounting situation because I am encountering QuickBooks error 6147. This error code is taking place, while I am attempting to restore a company file backup. I am experiencing this accounting mistake, so I am unable to work on my accounting software. Really, I don’t have actual reasons for it, so I am trying to know about all the causes. I don’t have a clear explanation about this error code. I have taken expert’s help, but all solutions are not useful. Can anyone suggest me the permanent fixes for resolving QuickBooks error 6147?QuickBooks Error 6147

PackagesAnyFreedom IssueVery LowLowHow do I set up Bellsouth email on Outlook?Unconfirmed
0%
Task Description

Bellsouth email and Microsoft Outlook or a lethal combination add to get both of them together you will need to complete bills of Bellsouth email settings on Outlook. Firstly, open Outlook client, go to file, and click add an account. Now you need to choose manually configure server settings or additional server types and click Next. Now enter the below details in the incoming mail server and outgoing mail server on Outlook.

Incoming mail server (IMAP)
Server name – imap.mail.yahoo.com.
Port number – 995.
IMAP Security – SSL/TLS.
Username – Your full BellSouth email address.
Password – Your BellSouth email password.

      

Outgoing mail server (IMAP)
Server name – smtp.mail.yahoo.com.
Port number – 465.
IMAP Security – SSL/TLS.
Username – Your full BellSouth email address.
Password – Your BellSouth email password.

PackagesAnyFreedom IssueVery LowLowHow do I resolve outlook cannot connect to server probl...Unconfirmed
0%
Task Description

Outlook is one of the most popular emailing services, which is mainly used by countless people to send or receive emails. It is the most effective way to communicate with anyone, so countless users select it for many purposes. It has the potential to store notes, tasks, and calendars. I want to send or receive emails through my outlook account, so I am not able to precede this task. For this purpose, I need to connect to the outlook exchange server with the aim of sending or receiving emails. I am experiencing difficulty to connect to the server. I don’t have the solid resolutions to fix outlook cannot connect to server issue. Can anyone recommend the easy methods to fix this issue?

PackagesAnyFreedom IssueVery LowLowCan 123.hp.com/setup help me to fix HP Printer error co...Unconfirmed
0%
Task Description

You will see this code on the control panel of the printer while you are trying to scan. It might show up when you try to scan some heavy book or documents. There is no need to worry as you can fix it easily by following these simple steps from 123.hp.com/setup:

  • Turn on the printer and wait till it is in an idle state
  • Remove the printer from the power supply and wait for a minute or so
  • Plug the cables back and reconnect the power cord utility to the back part of the printer and switch it on
  • Let it pass through the warm up stage and wait till the light on the printer blinks. This will fix the issue and try putting one sheet at a time in the scanner

If you still face any issue then just visit 123.hp.com/setup and get help instantly from the experts.

PackagesAnyFreedom IssueVery LowLowHow do I Choose The Best SEO Services Provider For My B...Unconfirmed
0%
Task Description

Apart from the fact that every SEO Services provider you see will pretend to be the best SEO services provider, there are some that are pretty good in real life. If you don’t have an eye to find out the best and professional SEO services, here are things that you should consider.
Instead of relying on the customer reviews entirely, trust your friends and knowns who have taken the SEO services before.
Learn more about the knowledge and processes of the SEO company.
Dig into the history of the SEO company to find the past performance of the company.


https://www.firstrankseoservices.com/

PackagesAnyFreedom IssueVery LowLowDial helpline number to find solutions of cash app card...Unconfirmed
0%
Task Description

Seeing the cash app card balance is easy and quick. Are you getting an issue in knowing the balance? But, you need to ask your technical queries to the team of professionals for immediate technical guidance. Get a quick fix of every problem with the cash app by connecting with us.

https://www.cashapp-customerservice.com/blog/check-balance-on-cash-app-card/

PackagesAnyFreedom IssueVery LowLowGet Cash app customer service number to resuscitate the...Unconfirmed
0%
Task Description

If there is sincere to make a portion, in any case, you get that your record is closed. Exactly when you see it, it is very abnormal for you. Since it stops your all work. Along these lines, you need to endeavor to restore your record by putting all information. In case you regardless of everything get the same, contact the Cash app customer service number.

https://www.numbers-for-support.com/Cash-app

PackagesAnyFreedom IssueVery LowLowFix interface issue while using elective send cash from...Unconfirmed
0%
Task Description

The association issue can be awkward as the applications are related with the bank. Thusly, if you can’t send cash from Paypal to Cash App in light of the association issue then you can notice a couple of chronicles to find the screw up and sort it out. You have another decision to contact uphold for help.
https://www.cashapp-customerservice.com/blog/send-money-from-paypal-to-cash-app/

PackagesAnyFreedom IssueVery LowLowHow do you unlock Yahoo account without phone number an...Unconfirmed
0%
Task Description

If you wish to unlock Yahoo account without phone number and email address, then you must go to the account recovery page of the Yahoo mail official site. Next, you are asked to enter your email address in the specified box and then click on the Continue tab. Next, you have to click on the Yes, send me the account key.
https://www.customercare-email.com/blog/unlock-my-yahoo-account/

PackagesAnyFreedom IssueVery LowLowFix Your Epson Printer Offline TroubleshootingUnconfirmed
0%
Task Description

Epson printer offline is the most common issue users might face. This error basically occurs due to low network, USB cable not connected properly, etc. I am a technician and have received this complaint from various customers. However, I have been tackling such issues from the past many years. This [https://www.epsonprintersupportnumber.com/blog/how-to-bring-an-offline-epson-printer-online/ Epson printer offline problem]] can easily be solved with a few steps. In case, you are also facing this error then you can get in touch with me. Your issue can be resolved instantly. I have high experience in the technical field and have been sorting out the issues of printer customers on a daily basis. If you want the instant fixing solution you can anytime connect with me and convey your printer issue. There is no restricted time and you can contact me anytime, 24*7. All you need to do is share the correct details of your printer model. You will instantly receive the fixing solution.

PackagesAnyFreedom IssueVery LowLowFix Your Epson Printer Offline TroubleshootingUnconfirmed
0%
Task Description

Epson printer offline is the most common issue users might face. This error basically occurs due to low network, USB cable not connected properly, etc. I am a technician and have received this complaint from various customers. However, I have been tackling such issues from the past many years. This [https://www.epsonprintersupportnumber.com/blog/how-to-bring-an-offline-epson-printer-online | Epson printer offline problem]] can easily be solved with a few steps. In case, you are also facing this error then you can get in touch with me. Your issue can be resolved instantly. I have high experience in the technical field and have been sorting out the issues of printer customers on a daily basis. If you want the instant fixing solution you can anytime connect with me and convey your printer issue. There is no restricted time and you can contact me anytime, 24*7. All you need to do is share the correct details of your printer model. You will instantly receive the fixing solution.

PackagesAnyFreedom IssueVery LowLowWhere To Go If Cash App Refund Problems Take Place?Unconfirmed
0%
Task Description

Sometimes, you accidently send money from your Cash app account to someone you don’t even know. However, you can’t get your money but there is a chance that you can request Cash App Refund to get your money refunded. Besides, if you are unable to fetch the right information about the same, you should visit the help section of the Cash app.
https://www.contact-customerservice.co/blog/cash-app-refund/

PackagesAnyFreedom IssueVery LowLowCan You Get cash app Dispute? If the transfer can't be ...Unconfirmed
0%
Task Description

If you have contacted the merchant and are unable to complete the transaction, you may file a dispute. To file a cash app dispute for a credit card transaction, you must select a transaction in the Cash Request. Therefore, select Essential Help and Application Support for Cash. Dispute resolves this transaction. You can visit our website for technical support related to the money app.

https://www.cashapp-customerservice.com/blog/can-i-dispute-a-cash-app-payment/

PackagesAnyFreedom IssueVery LowLowHow to Connect With coursework help online in USA Exper...Unconfirmed
0%
Task Description

Description:

Additional info:
* package version(s)
* config and/or log files etc.

Steps to reproduce:

coursework help

PackagesTestingImplementation RequestLowMedium[spacefm] add new packageIn Progress
0%
Task Description

Add SpaceFM File Manager for Hyperbola

Aur Package: spacefm Debian Package: spacefm

PackagesStableBug ReportLowMediumGarbled display with xfce4-terminal (terminfo)Unconfirmed
0%
Task Description

A very nasty bug I wasn’t able to find an answer to.
I compiled stuff (buildroot) using menuconfig, the menu display was fine in xfce4-terminal (See screenshot #1)
I restarted the config a few days later with the same command :

$ make menuconfig

and this time the display was messed up (See screenshot #2)

After investigation, I noticed a directory (filled with stuff) have been created in my home folder :

.terminfo

I don’t know why. But anyway, if I delete it, then the display is ok again.
I noticed that if I use good old xterm terminal, then the display is fine even if the .terminfo directory is present. (it uses “xterm” instead of xterm-256color)

But, with xfce4-terminal (and others, I tried with gnome-terminal, sakura..), the display is messed up if the .terminfo directory is present in my home folder.

I also noticed that if I run the command in a screen session, the issue is not present.

(I open xfce4-terminal)

$ screen
$ printenv TERM
screen.xterm-256color
$ make menuconfig (or htop, or other program using ncurses)

= display ok

but with default :

(I open xfce4-terminal)

$ printenv TERM
xterm-256color
make menuconfig (or htop, or other program using ncurses)

= display messed up if .terminfo directory is present

So I have no idea why this .terminfo directory is generated. What could trigger its generation ? Is that an issue with ncurses or something else ?

Thanks for your help

Software DevelopmentHyperToolsImplementation RequestLowLow[hypertools] create libretools replacement for Hyperbol...Deferred
0%
Task Description

Create hypertools to replace libretools package for HyperbolaBSD and GNU/Linux

It’s long period to develop this package.
For now, a systemd-nspawn wrapper is being developed for “libretools”[0]

[0]:https://issues.hyperbola.info/index.php?do=details&task_id=86

PackagesAnyReplace RequestLowLow[appmenu-qt4] replace with appmenu-qt (qt5)Deferred
0%
Task Description

“appmenu-qt4”[0][2] is a deprecated package (release in 2012)[1] and use qt4 unsupported/non-lts software[3], but “appmenu-qt5” not contains any release source code[2]

$ pacman -Si appmenu-qt4
Repository : community
Name : appmenu-qt4
Version : 0.2.6-1
Description : Export Qt4 applications menus over D-Bus
Architecture : x86_64
URL : https://launchpad.net/appmenu-qt Licenses : GPL Groups : None
Provides : None
Depends On : libdbusmenu-qt4
Optional Deps : None
Conflicts With : appmenu-qt
Replaces : appmenu-qt
Download Size : 16.55 KiB
Installed Size : 48.00 KiB
Packager : Antonio Rojas arojas@archlinux.org Build Date : Tue 28 Feb 2017 05:59:31 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature

[0]:https://launchpad.net/appmenu-qt (qt4)
[1]:https://launchpad.net/appmenu-qt/+download [2]:https://launchpad.net/appmenu-qt5 [3]:https://en.wikipedia.org/wiki/Qt_5.6_LTS

PackagesAnyImplementation RequestLowLow[nut] add Network UPS Tools 2.7.x packageAssigned
0%
Task Description

Add “nut” package.

Useful for uninterruptible power supplies, power distribution units, solar controllers and servers power supply units.

PackagesAnyImplementation RequestLowLow[codecrypt] add new packageUnconfirmed
0%
Task Description

This is a GnuPG-like unix program for encryption and signing that uses only quantum-computer-resistant algorithms:

  McEliece cryptosystem (compact QC-MDPC variant) for encryption
  Hash-based Merkle tree algorithm (FMTSeq variant) for digital signatures

Codecrypt is free software. The code is licensed under terms of LGPL3 in a good hope that it will make combinations with other tools easier.

PackagesAnyFeature RequestLowLow[scribus] missing hunspell supportUnconfirmed
0%
Task Description

I have noticed that the version of scribus that is available in hyperbola does not have the option of spelling correction and by references of the official scribus channel indicate that scribus has to be built with hunspell. I do not understand how that is done, I just need to be able to correct spelling from scribus.

PackagesAnyBug ReportLowMedium[cryptsetup] when dmcrypt start, the "/" filesystem, m...Assigned
0%
Task Description

When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:

* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...

These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password.
Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.

PackagesAnyBug ReportLowMedium[cryptsetup] can't umount luks filesystem on reboot/shu...Assigned
0%
Task Description

dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:

* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
Device foobar-pv is still in use                                              [ !! ]
PackagesAnyFeature RequestLowLow[npapi-vlc] package from git sourceUnconfirmed
0%
Task Description

Description: As mentioned in Bug #18, our VLC plugin was not maintained in some time and the deprecated addon was removed. However, upstream is actively working on the plugin as per: https://code.videolan.org/videolan/npapi-vlc/tree/master

We should build this from source and re-package.

PackagesAnyBug ReportLowLow[usbutils] lsusb does not list device namesIn Progress
0%
Task Description

Description:

lsusb does not resolve device names from /var/lib/usbutils/usb.ids

The same thing as described here: https://unix.stackexchange.com/questions/220759/lsusb-doesnt-list-device-names

PackagesAnyBug ReportLowLow[erlang-nox] uses "nox" suffixIn Progress
0%
Task Description

Description:

  • Fix package name to erlang-headless that is the correct name for packages without graphical user interface support. nox suffix is incorrect because Hyperbola supports Wayland too, not only X.Org.

Additional info:
* package version(s)

  • 19.3-3

* config and/or log files etc.

Steps to reproduce:

  • None
PackagesAnyBug ReportLowLow[qbittorrent-nox] uses "nox" suffixIn Progress
0%
Task Description

Description:

  • Fix package name to qbittorrent-headless that is the correct name for packages without graphical user interface support. nox suffix is incorrect because Hyperbola supports Wayland too, not only X.Org.

Additional info:
* package version(s)

  • 3.3.11-1

* config and/or log files etc.

Steps to reproduce:

  • None
PackagesAnyBug ReportLowLow[crystal] error build InvidiousResearching
0%
Task Description

Description:

crystal build src/invidious.cr –release

Error in src/invidious.cr:19: while requiring "kemal"

require "kemal"
^

in lib/kemal/src/kemal.cr:4: while requiring "./kemal/*"

require "./kemal/*"
^

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^~~~~~~~

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^

in macro 'property' expanded macro: macro_48177600:567, line 4:

   1.       
   2.         
   3.           
>  4.             @static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   5. 
   6.             def static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   7.               @static_headers
   8.             end
   9. 
  10.             def static_headers=(@static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil)
  11.             end
  12.           
  13.         
  14.       
  15.     

undefined constant File::Info

Additional info:
* package version(s)

Crystal 0.22.0 (2017-04-22) LLVM 4.0.0

Steps to reproduce:

PackagesAnyBug ReportLowHigh[kaccounts-integration] option to add NextCloud/OwnClou...Unconfirmed
0%
Task Description

Description:

  • Option to add NextCloud/OwnCloud accounts in ‘Online Accounts’ section of System Settings not appearing.

Additional info:
* package version(s)

  • 17.04.0-1

* config and/or log files etc.

  • N/A

Steps to reproduce:

  • Run application
  • Go to ‘Online Accounts’ section of System Settings
PackagesAnyBug ReportLowHigh[kdenetwork-kopete] clicking to add an Jabber Account o...Unconfirmed
0%
Task Description

Description:

  • Clicking to add an Jabber Account opens a dialog with no fields to enter information.

Additional info:
* package version(s)

  • 17.04.0-3.hyperbola1

* config and/or log files etc.

  • N/A

Steps to reproduce:

  • Run Application
  • Clicking to add an Jabber Account
PackagesAnyBug ReportLowHigh[xfce4-power-manager] locking session issueRequires Testing
90%
Task Description

I probably should’ve mentioned this before, but if it is set to suspend when lid is closed, it should automatically lock. if the security option: lock screen with system is set to sleep is tweaked on it doesn’t lock always.

This is word for word what I wrote in the forums, but yeah... it is a problem say if someone wants to use your laptop without your permission and can do so.

But it is also a problem if you set it to lock instead because it is more prone to overheating when your not using it, and it doesn’t suspend quickly enough.

I have tried this many times and the same story can be told, again and again.

I think this issue should be considered high or critical merely because of the privacy risk if someone gets their hands on your laptop while its on. Even if you have been away... :/

I wonder if anyone else has this issue... well you guys will tell me I am sure. if critical doesn’t match what you think I am sure you will change it. ;)

PackagesAnyImplementation RequestLowLow[opmsg] add new packageResearching
0%
Task Description

Description: opmsg is a replacement for gpg which can encrypt/sign/verify your mails or create/verify detached signatures of local files. Even though the opmsg output looks similar, the concept is entirely different.

Additional info:
https://aur.archlinux.org/packages/opmsg/

PackagesTestingBug ReportMediumMedium[emacs] crush after swayResearching
0%
Task Description

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

PackagesTestingImplementation RequestMediumMediumlinux-libre-lts-hypersec: New package with extra securi...Deferred
0%
Task Description

Description: Per a user request and to better secure the kernel, we can embed the cryptsetup and ciphers in the kernel. This would mean rather than exposed modules, they are built-in to the kernel and ready to use even without an intramfs.

To be embedded: ciphers aes, twofish, serpent; sha256, sha512 - and the necessary modules (don’t forget the block modes xts, lvm and cryptsetup ...)

Additionally, we could include USB Guard and any other features that meet our social contract and security outlook.

PackagesStableBug ReportMediumMedium[libusb] error when mounting USB memories on virtual ma...Researching
0%
Task Description

## Bug ##

libusb: error [_get_usbfs_fd] libusb couldn’t open USB device /dev/bus/usb/003/003: permission denied libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.

Reference links: https://askubuntu.com/questions/526962/libusb-couldnt-open-usb-device-dev-bus-usb-002-006-permission-denied-libusb

PackagesStableBug ReportMediumMedium[linux-libre-lts] [i915] Display freeze : hpd interrupt...Deferred
0%
Task Description

Hello,

I recently acquired a T400 Thinkpad with 1440×900 panel.
On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.

Both Thinkpad are running the same Hyperbola installation :

Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf)
Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message)
video driver : modesetting
DE : xfce4 with xfwm4

On the Thinkpad x200, everything works great, no issue to report.

On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :

hpd interrupt storm detected on connector hdmi-a-1

And the display (and sound) freezes for 10 seconds (sometimes more !)

As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.

Results :

With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo.
With 4.16.8 : Issue is not present ! No more freeze !

I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series.
Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.

Thanks for your help

PackagesStableBug ReportMediumMedium[virt-install] ERROR '_OsVariant' object has no attribu...Requires Testing
100%
Task Description

Trying to create a VM using virt-install (1.4.1-2.hyperbola2)

virt-install --connect qemu:///system \
--name debian \
--ram 1024 \
--disk path=/home/test/debian.img,size=50 \
--vcpus 2 \
--os-type linux \
--os-variant generic \
--network bridge=virbr0 \
--graphics none \
--console pty,target_type=serial \
--location 'http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/' \
--extra-args 'console=ttyS0,115200n8 serial'

This error shows up :
ERROR : ‘_OsVariant’ object has no attribute ‘urldistro’

I can’t create the VM.

PS : Error is not present on Debian Stretch with virt-install 1.4.0-5

Thanks for your help.

PackagesStableBug ReportMediumCritical[torsocks] which: no getcapRequires Testing
90%
Task Description

Current torsocks version is broken.
It returns the following error when attempting to torify application :

which: no getcap
PackagesStableBug ReportMediumHighopensmtpd: permission problemsIn Progress
0%
Task Description

Description:

cat msg | /usr/sbin/sendmail – sendmail: No such file or directorycannot create temporary file /var/spool/smtpd/offline/1572544775.XXXXIqNsFX

Additional info:
* package version: 6.4.2p1-1.hyperbola2.backports1

It is same problem as here:
https://github.com/OpenSMTPD/OpenSMTPD/issues/839

I could solve it with:

sudo chmod g+s /usr/sbin/smtpctl
sudo chmod g+s /usr/sbin/smtpctl

and then

sudo rc-service smtpd start

Even though I think I should not need to start it to use only sendmail.

ServicesHyperWiki/DokuWikiImplementation RequestMediumMediumLibreboot hardening grub guideUnconfirmed
0%
Task Description

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

Showing tasks 301 - 350 of 516 Page 7 of 11<<First - 5 - 6 - 7 - 8 - 9 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing