All Projects

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don't think "steps to reproduce" to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don’t think “steps to reproduce” to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

extra/asp 1-1
     Arch Linux build source file management tool

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description is referring to operating system, and not to the kernel itself (Linux). It shall be amended.

I propose to change the name of the package and software itself to be hgsp or hsp instead asp, and that description says “Hyperbola GNU/Linux-libre build source file management tool”

Description:

default configuration is /etc/auto.master instead of /etc/autofs/auto.master

admin→ sudo /usr/bin/automount -v -f -p /run/autofs.pid
Starting automounter version 5.1.2, master map /etc/auto.master
using kernel protocol version 5.02
lookup(file): file map /etc/auto.master missing or not readable
no mounts in table

By default, the ‘disable-publishing’ parameter in the [publish] section of avahi-daemon.conf is set to ‘no’, which can be seen in my opinion as a privacy issue as avahi broadcasts the hostname without the user’s consent even though this has been explicitly disabled in the settings of networkmanager.

Description:

community/avrdude 1:6.3-2
    Download/upload/manipulate the ROM and EEPROM contents of AVR microcontrollers

Description is vague because of the word “content”. The word itself is fine in English language, but here it is used out of the proper context. And it is not not necessary at all. When one knows what is the abbreviation of ROM, such as Read-Only Memory, then any mentioning of contents of ROM is needless. It is enough to say: “Download/upload/manipulate the ROM and EEPROM of AVR microcontrollers”

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Content

Could it be possible to add :

awesome-terminal-fonts

to the repo please ?

https://www.parabola.nu/packages/community/any/awesome-terminal-fonts/ https://github.com/gabrielelana/awesome-terminal-fonts

Thanks

community/backuppc 4.1.2-1
     Enterprise-grade system for backing up Linux, Windows and MacOS PCs

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description is referring to operating system, and not to the kernel itself (Linux). It shall be amended.

Further words such as Windows and MacOS shall be removed as they steer users towards proprietary software.

The current version of BleachBit needs to be adapted so it can clean the new .cache/hyperbola/ directory.

Description:

org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name ‘org.bluez.obex’: no such name

Additional info:
* package version(s)

$ pacman -Si blueman
Repositorio               : community
Nombre                    : blueman
Versión                   : 2.0.4-3
Descripción               : GTK+ Bluetooth Manager
Arquitectura              : x86_64
URL                       : https://github.com/blueman-project/blueman
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : bluez  bluez-libs  gtk3  libnotify  python-cairo  python-dbus
                            python-gobject
Dependencias opcionales   : dnsmasq: Network Access Point (NAP) support
                            networkmanager: Dial Up Networking (DUN) and Personal Area
                            Networking (PAN) support
                            pulseaudio-bluetooth: audio devices support
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1814,18 KiB
Tamaño de la instalación  : 5345,00 KiB
Encargado                 : Felix Yan <felixonmars@archlinux.org>
Fecha de creación         : dom 25 dic 2016 12:00:42 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

(blueman-applet | ccze -A):
- https://paste.debian.net/plain/1049476

(pkgfile -l blueman):
- https://paste.debian.net/plain/1049477

Steps to reproduce:

- Install blueman

community/bluez-tools 0.2.0-1
     A set of tools to manage Bluetooth devices for Linux

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description is referring to operating system, and not to the kernel itself (Linux). It shall be amended.

Description:

The description of the package need to be changed to accommodate:
https://www.gnu.org/philosophy/words-to-avoid.html

To refer to published works as “assets”, or “digital assets”, is even worse than calling them “content” — it presumes they have no value to society except commercial value.

extra/breeze 5.9.5-1 (plasma)
    Artwork, styles and assets for the Breeze visual style for the Plasma Desktop

community/bsd-games 2.17-17
     Linux port of the collection of BSD command line games

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description is referring to operating system, and not to the kernel itself (Linux). It shall be amended.

community/btchip-udev 2-1
*    Udev rules to connect BTChip wallet to your linux box

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description is referring to operating system, and not to the kernel itself (Linux). It shall be amended.

Package Request: https://github.com/calamares/calamares

Original Bug Report:
— I would also like to test the beta isos when they are ready through qemu. If it looks good I plan to fully install them onto my laptop. My libreboot x200.

I don’t know if I should make a separate feature for this, but xfce is a good stable desktop environment for such a choice. that and lxde.

Though lxde is going to die...

Prior version 0.0.25 and below are outdated.

Since version 0.100 and later, there are some changes being redesigned from scratch, added three new weights (including extra bold, light and thin) but not italic or oblique styles, AppStream metadata translations from contributors, and more.

See the version history releases for more details: https://gitlab.gnome.org/GNOME/cantarell-fonts/raw/master/NEWS

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. chdkptp requires root privileges to connect to a camera.

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. Requires root privileges to connect to a camera.

community/checksec 1.7.5-1
     Tool designed to test which standard Linux OS and PaX security features are being used

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description is referring to operating system, and not to the kernel itself (Linux). It shall be amended.

community/cinnamon 3.2.8-1 [installed]
     Linux desktop which provides advanced innovative features and a traditional user experience

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description is referring to operating system, and not to the kernel itself (Linux). It shall be amended.

Additional info:
* package version

Repositorio               : community
Nombre                    : clamtk
Versión                   : 5.24-1
Descripción               : Easy to use, light-weight, on-demand virus scanner for Linux
                            systems
Arquitectura              : any
URL                       : https://dave-theunsub.github.io/clamtk/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : clamav  perl  gtk2-perl  perl-locale-gettext  perl-libwww
                            perl-http-message  perl-lwp-protocol-https  perl-text-csv
                            perl-json  python  zenity  desktop-file-utils  gnome-icon-theme
                            cron
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 179,90 KiB
Tamaño de la instalación  : 1378,00 KiB
Encargado                 : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación         : sáb 19 nov 2016 20:25:20 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ clamtk
Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.

Steps to reproduce:

* Install clamtk in all version

community/clamtk 5.24-1
     Easy to use, light-weight, on-demand virus scanner for Linux systems

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description is referring to operating system, and not to the kernel itself (Linux). It shall be amended.

Description:

The description of the package need to be changed to accommodate:
https://www.gnu.org/philosophy/words-to-avoid.html

community/classpath 0.99-3
    A free replacement for Sun's proprietary core Java class libraries.

My suggestion is to describe what software does, and to remove that it is free replacement for proprietary code, as it gives some kind of legitimacy to proprietary software.

The IDE codelite is an excellent development environment, continuously updated, has a clear vision and active support.
Would be nice to have this one within the repositories in upcoming releases, perhaps 0.5?

I’m writing here about the package Conky. It is the useful widget of system monitor into your desktop, but there are some serious issues:

Config variables

• distribution outputs the string “Arch Linux” instead of “Hyperbola GNU/Linux-libre”.
• eve requires users to use API for non-libre/free video game EVE Online, and should be removed.
• All Beep Media Player (BMPx) related variables (including bmpx_album, bmpx_artist, bmpx_bitrate, bmpx_title, bmpx_track and bmpx_uri) are obselete and useless, and should be removed because the package BMPx isn’t present on Arch and Hyperbola official repositories but Arch User Repository (AUR).
• [For Milky Way version 0.4.x only] All PulseAudio related variables (including if_pa_sink_muted, pa_sink_volume, pa_sink_volumebar, pa_sink_description, pa_card_name and pa_card_active_profile) are no longer used, and should be removed due replaced the default audio server with sndio.

Manual

• Contains non-FDSG compliant distros.
• Contains vague terminology.
• Requires users to use API for non-libre/free weather network service(s) (including The Weather Channel).

cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency

Error message :

“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14.
BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”

After installing perl-text-charwidth, it works fine.

Hello,

Could it be possible to add this package :

crunch

“A wordlist generator where you can specify a standard character set or a character set you specify and generate all possible combinations and permutations.”

https://aur.archlinux.org/packages/crunch/

License : GPL2

Thanks

Description:

community/cutter 1.04-1
     TCP/IP Connection cutting on Linux Firewalls and Routers

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Even though I am not sure for this package. It needs review if this description is correct.

Description:

community/cwiid 0.6.00+svn201-1
     Linux Nintendo Wiimote interface

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Even though I am not sure for this package. It needs review if this description is correct.

Description:

community/deepin-account-faces 1.0.10-1 (deepin)
     Account faces for Linux Deepin

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Even though I am not sure for this package. It needs review if this description is correct.

Description:

community/deepin-control-center 4.1.2-1 (deepin)
     New control center for linux deepin

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Even though I am not sure for this package. It needs review if this description is correct.

Description:

community/deepin-notifications 3.0.4-1 (deepin)
     System notifications for linuxdeepin desktop environment

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Even though I am not sure for this package. It needs review if this description is correct.

Description:

community/deepin-screenshot 3.1.15-1 (deepin-extra)
     Easy-to-use screenshot tool for linuxdeepin desktop environment

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Even though I am not sure for this package. It needs review if this description is correct.

Description:

Devede fails to convert transcoded videos to iso format with libburn-1.5.0.

Drive current: -outdev 'stdio:/home/heckyel/movie/movie.iso'
Media current: stdio file, overwriteable
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data,  334g free
xorriso : FAILURE : -as genisofs: Unsupported option '-dvd-video'
xorriso : NOTE : -return_with SORRY 32 triggered by problem severity FAI

Additional info:

$ pacman -Si devede
Repositorio               : community
Nombre                    : devede
Versión                   : 4.8.8-1
Descripción               : A program to create VideoDVDs and CDs
Arquitectura              : any
URL                       : http://www.rastersoft.com/programas/devede.html
Licencias                 : GPL3
Grupos                    : Nada
Provee                    : Nada
Depende de                : mencoder  ffmpeg  dvdauthor  vcdimager  cdrkit  ttf-dejavu
                            gtk3  python-cairo  python-gobject  python-setuptools
Dependencias opcionales   : mplayer
                            vlc
                            mpv
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1640,88 KiB
Tamaño de la instalación  : 3331,00 KiB
Encargado                 : Sergej Pupykin <pupykin.s+arch@gmail.com>
Fecha de creación         : vie 10 feb 2017 05:06:37 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Link’s code:

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/mkisofs.py#L61

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/genisoimage.py#L61

Steps to reproduce:

- Install devede
- Create video DVD disc

When using the package for wireless connections no further icon is displayed without having the package [b]network-manager-applet[/b] installed.

Description:

I just guess that this script cleanup_digikamdb depends on kreadconfig which is not there.

Additional info:

extra/digikam 5.5.0-2.hyperbola1 [installed]

  Digital photo management application for KDE

Steps to reproduce:

$ cleanup_digikamdb

/usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found

                  Cleanup Databases v1.1 (digiKam )                    

————————————————————————-
/usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found
This program only handles SQLite databases.
[~]

Hello,

Could it be possible to add this package :

dmg2img

“A CLI tool to uncompress Apple’s compressed DMG files to the HFS+ IMG format”

https://aur.archlinux.org/packages/dmg2img/

License : GPL2

Thanks

The package appears in parabola’s pcr repository. I modified the AUR PKGBUILD to compile the last stable version (and the installation works fine). Please add this package to the official repos.

https://aur.archlinux.org/packages/dreamchess-git/ https://www.parabola.nu/packages/pcr/x86_64/dreamchess-git/

Description:

community/drupal 8.3.2-1
    A PHP-based content management platform

The description is vague. Content is not HTML page alone. Then even text editor could be called “content management”.

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Content

In most cases, that term really refers to a system for updating pages on a web site. For that, we recommend the term “web site revision system” (WRS).

Description:

community/ecryptfs-utils 111-2
     Enterprise-class stacked cryptographic filesystem for Linux

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Even though I am not sure for this package. It needs review if this description is correct.

About that distro, Elementary OS is semi-libre/free, Ubuntu based, long term support, but does not comply with the GNU Free System Distributibution Guidelines (FSDG). To either rebrand or remove existing non-FSDG compliant distro icon files.

The following affected files are present in this list:

• /usr/share/icons/elementary/places/16/distributor-logo.svg
• /usr/share/icons/elementary/places/24/distributor-logo.svg
• /usr/share/icons/elementary/places/32/distributor-logo.svg
• /usr/share/icons/elementary/places/48/distributor-logo.svg
• /usr/share/icons/elementary/places/64/distributor-logo.svg
• /usr/share/icons/elementary/places/128/distributor-logo.svg
• /usr/share/icons/elementary/places/symbolic/distributor-logo-symbolic.svg

Some users use emacs as a tiling window manager. Please add EXWM[0]

[0]: https://github.com/ch11ng/exwm

Erika is a Python GTK+ podcast manager using webkitgtk.

Erika is released under the MIT License, with the exception of the file erika/frontend/widgets/scrolled_window.py which is released under the GNU/GPLv3 License.

Attached is a PKGBUILD for the last stable release based on the AUR one (I moved a few of the dependencies to optdepends). It builds fine and works.

Hi,

Would be nice to add etherpad-lite to our pacman.

https://github.com/ether/etherpad-lite

https://aur.archlinux.org/packages/etherpad-lite/

One can mount exfat by running commands such as “sudo modprobe fuse” and “sudo mount.exfat /dev/sdc1 /mnt/storage” but it is inconvenient.

Also, loading fuse at startup is problematic - see here:

https://issues.hyperbola.info/index.php?do=details&task_id=1433

Hello,

Could it be possible to add this package :

exifread

“Python library to extract EXIF data from tiff and jpeg files”

https://aur.archlinux.org/packages/exifread/

Thanks

Description:
This package has a strong systemd integration. It has a systemd backend to get files modifications:

(from /etc/fail2ban/jail.conf)

# systemd:   uses systemd python library to access the systemd journal.
#              Specifying "logpath" is not valid for this backend.
#              See "journalmatch" in the jails associated filter config

and many files at /etc/fail2ban/filter.d have systemd stuff

[/etc/fail2ban/filter.d] [0]
$ grep -i systemd *
dovecot.conf:#journalmatch = _SYSTEMD_UNIT=dovecot.service
ejabberd-auth.conf:# Notes.:  systemd journalctl style match filter for journal based backend
postfix.conf:journalmatch = _SYSTEMD_UNIT=postfix.service
postfix-sasl.conf:#journalmatch = _SYSTEMD_UNIT=postfix.service
pure-ftpd.conf:journalmatch = _SYSTEMD_UNIT=pure-ftpd.service + _COMM=pure-ftpd
recidive.conf:journalmatch = _SYSTEMD_UNIT=fail2ban.service PRIORITY=5
sshd.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
sshd-ddos.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd

Additional info:
* fail2ban-0.9.6-2.hyperbola3

Description:
The /etc/fail2ban/filter.d/dovecot.conf file has a failregex with the following:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user\s*$

and works with things like:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user

but with verbosity enabled in Dovecot, this output looks like this:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user (given password: password)

and in this case it doesn’t work, but it does if we fix the failregex if we replace it with:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user( \(given password: \S*\))?\s*$

with this new expression, it works with and without verbosity

And regarding postfix, to make it work correctly I “backported” some pieces from newest failregex:

/etc/fail2ban/postfixr-rbl.conf:

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: [45]54 [45]\.7\.1 Service unavailable; Client host \[\S+\] blocked using .* from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

/etc/fail2ban/postfix.conf: (second failregex)

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: 45[04] 4\.7\.1 Client host rejected: cannot find your (reverse )?hostname, (\[\S*\]); from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

I can create a patch if you want. Note that I haven’t tested all filters, some others may also need some rework

Additional info:
* fail2ban-0.9.6-2.hyperbola3

Description:

I saw errors in logs because fail2ban couldn’t find /usr/bin/sendmail, and discovered this:

[/etc/fail2ban] [0]
$ grep /usr/bin/sendmail */*
action.d/sendmail-buffered.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                 Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-geoip-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipjailmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-matches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>

Please, also check for other binaries with wrong locations

As of now, the solution is as simple as removing this line → https://git.hyperbola.info:50100/packages/community.git/tree/fail2ban/PKGBUILD#n79

Additional info:
* fail2ban-0.9.6-2.hyperbola3

Description:

community/fbreader 0.99.4-6
     An e-book reader for Linux

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux