|
Packages | Any | Implementation Request | Medium | Medium | [uzem][uzebox] add uzem emulator and uzebox firmware pa... | Assigned | |
Task Description
Add “uzem” emulator and “uzebox” firmware packages[0][1].
It’s a emulator and firmware for fully free 8bit game console.
[0]:http://belogic.com/uzebox/index.asp (no https found) [1]:https://github.com/Uzebox/uzebox
|
|
Packages | Any | Bug Report | Low | Medium | [cryptsetup] when dmcrypt start, the "/" filesystem, m... | Assigned | |
Task Description
When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:
* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...
These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password. Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.
|
|
Packages | Any | Bug Report | Low | Medium | [cryptsetup] can't umount luks filesystem on reboot/shu... | Assigned | |
Task Description
dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:
* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv failed: Device or resource busy
Device foobar-pv is still in use [ !! ]
|
|
Packages | Any | Feature Request | Medium | Medium | [DCPT500W] possible integration of drivers to cups on P... | Assigned | |
Task Description
Hi guys, I have ever run into a Brother brand printer model DCPT500W[0], and I have seen that the source code for the drivers under GPLv3 license is available.
I also see that there is a file brother_dcpt500w_printer_en.ppd, which is important for cups, which is why it may be necessary to integrate it into the cups, as long as the drivers are Libre.
[0]:https://download.brother.com/welcome/dlf101963/dcpt500w_cupswrapper_GPL_source_3.0.2-0.tar.gz
|
|
Packages | Any | Update Request | Medium | Medium | [cups] update request | Assigned | |
Task Description
New versión v2.2.7
References:
|
|
Packages | Any | Implementation Request | Very Low | Medium | [gitea] self-hosted git service | Assigned | |
Task Description
Description:
A nice Git service would be welcomed in our pacman.
- https://github.com/go-gitea/gitea
- https://www.archlinux.org/packages/community/x86_64/gitea/
|
|
Packages | Any | Feature Request | Very Low | Medium | Remove dependency of packages on pulseaudio/libpulse | Assigned | |
Task Description
Similar to systemd, pulseaudio or libpulse is forced upon users as many packages require it such as kodi, gnome-shell (and thus also gdm), ffmpeg, gst-plugins-good, simplescreenrecorder, clementine, empathy, seamonkey (iceape), fluidsynth, mumble and qemu, Most/all of these packages can probably be compiled with pulseaudio or libpulse as an optional dependency instead.
|
|
Packages | Any | Security Issue | Very Low | Medium | [patch] CVE-2018-6951 - NULL pointer DoS | Assigned | |
Task Description
An issue was discovered in GNU patch through 2.7.6. There is a segmentation fault, associated with a NULL pointer dereference, leading to a denial of service in the intuit_diff_type function in pch.c, aka a “mangled rename” issue.
https://security-tracker.debian.org/tracker/CVE-2018-6951
|
|
Packages | Any | Bug Report | Very Low | Medium | [clamtk] Gtk-WARNING **: Impossible to find the theme e... | Assigned | |
Task Description
Additional info: * package version
Repositorio : community
Nombre : clamtk
Versión : 5.24-1
Descripción : Easy to use, light-weight, on-demand virus scanner for Linux
systems
Arquitectura : any
URL : https://dave-theunsub.github.io/clamtk/
Licencias : GPL
Grupos : Nada
Provee : Nada
Depende de : clamav perl gtk2-perl perl-locale-gettext perl-libwww
perl-http-message perl-lwp-protocol-https perl-text-csv
perl-json python zenity desktop-file-utils gnome-icon-theme
cron
Dependencias opcionales : Nada
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 179,90 KiB
Tamaño de la instalación : 1378,00 KiB
Encargado : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación : sáb 19 nov 2016 20:25:20 -05
Validado por : Suma MD5 Suma SHA-256 Firma
* config and/or log files etc.
$ clamtk Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.
Steps to reproduce:
* Install clamtk in all version
|
|
Packages | Any | Bug Report | Very Low | Medium | [slim] login screen not displaying correctly | Assigned | |
Task Description
It worked fine on the previous version of Hyperbola. The word user/username does not show up. A workaround is to wait 10 seconds and enter the username and click enter - then it will switch correctly to the password screen (otherwise you need to enter the username and password at least twice in order to successfully login).
|
|
Packages | Any | Implementation Request | Low | Low | [nut] add Network UPS Tools 2.7.x package | Assigned | |
Task Description
Add “nut” package.
Useful for uninterruptible power supplies, power distribution units, solar controllers and servers power supply units.
|
|
Packages | Any | Bug Report | Very Low | Low | [gimp] [gegl] Module '/usr/lib/gegl-0.3/lens-correct.so... | Assigned | |
Task Description
admin→ gimp IMG_20170909_153350828.jpg GEGL-Message: Module ‘/usr/lib/gegl-0.3/lens-correct.so’ load error: liblensfun.so.1: cannot open shared object file: No such file or directory GEGL-Message: Module ‘/usr/lib/gegl-0.3/matting-levin.so’ load error: libumfpack.so.5: cannot open shared object file: No such file or directory
(gimp:12519): GLib-GObject-WARNING **: g_object_set_valist: object class ‘GeglConfig’ has no property named ‘cache-size’
Those are errors I get when running Gimp.
|
|
Packages | Any | Implementation Request | Very Low | Low | [emacs-exwm] add package | Assigned | |
Task Description
Some users use emacs as a tiling window manager. Please add EXWM[0]
[0]: https://github.com/ch11ng/exwm
|
|
Packages | Any | Implementation Request | Very Low | Low | [SafeEyes] add new package | Assigned | |
Task Description
Safe Eyes is a program to manage breaks in front of the computer. It has many features that help us adapt it to our needs.
|
|
Packages | Stable | Bug Report | Very Low | Very Low | Gajim "Unable to run gpg - it may not be available" | Assigned | |
Task Description
Description:
Gajim XMPP Client wont start after installing python2-gnupg.
Additional info: * package version(s)
community/python2-gnupg 0.4.0-2
extra/gajim 0.16.8-1.hyperbola2
* config and/or log files etc.
/usr/lib/python2.7/site-packages/gajim/common/gajim.py
Steps to reproduce:
With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:
07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available. Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
raise child_exception
OSError: [Errno 2] No such file or directory Traceback (most recent call last):
File "gajim.py", line 513, in <module>
interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
raise OSError(msg)
OSError: Unable to run gpg - it may not be available.
After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.
# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py 162:GPG_BINARY = ‘gpg1’
By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.
Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.
|
|
Packages | Any | Backport Request | Very Low | Very Low | Icetray for Iceape-uxp | Assigned | |
Task Description
This already works for it, but I just thought I would request it to be put in.
|
|
Packages | Stable | Drop Request | Very Low | Critical | [osdbattery] Unmaintained and unsupportable | Unconfirmed | |
Task Description
osdbattery is (probably) useless and broken so Conky did compete because It is still unmaintained and unsupported over 14 years ago (last released version 1.4 on August 23, 2005), and should be removed per anti-abandonware rule at the packaging guidelines.
Also, the default config file contains non-libre/free Microsoft font Verdana as X11 font format property in font variable.
|
|
Packages | Stable | Security Issue | Very Low | Critical | [lts-kernel][sec] filter /dev/mem access & restrict acc... | Unconfirmed | |
Task Description
These two options could be enabled :
Kernel hacking → [*] Filter access to /dev/mem [*] Filter I/O access to /dev/mem
Security options → [*] Restrict unprivileged access to the kernel syslog
|
|
Packages | Any | Security Issue | Very Low | Critical | [opensmtpd] CVE-2020-8794 | Unconfirmed | |
Task Description
Description: https://www.openwall.com/lists/oss-security/2020/02/24/5 https://www.bleepingcomputer.com/news/security/new-critical-rce-bug-in-openbsd-smtp-server-threatens-linux-distros/
Qualys Security Advisory
LPE and RCE in OpenSMTPD’s default install (CVE-2020-8794)
Summary Analysis ... Acknowledgments
We discovered a vulnerability in OpenSMTPD, OpenBSD’s mail server. This vulnerability, an out-of-bounds read introduced in December 2015 (commit 80c6a60c, “when peer outputs a multi-line response ...”), is exploitable remotely and leads to the execution of arbitrary shell commands: either as root, after May 2018 (commit a8e22235, “switch smtpd to new grammar”); or as any non-root user, before May 2018.
Because this vulnerability resides in OpenSMTPD’s client-side code (which delivers mail to remote SMTP servers), we must consider two different scenarios:
- Client-side exploitation: This vulnerability is remotely exploitable
in OpenSMTPD's (and hence OpenBSD's) default configuration. Although
OpenSMTPD listens on localhost only, by default, it does accept mail
from local users and delivers it to remote servers. If such a remote
server is controlled by an attacker (either because it is malicious or
compromised, or because of a man-in-the-middle, DNS, or BGP attack --
SMTP is not TLS-encrypted by default), then the attacker can execute
arbitrary shell commands on the vulnerable OpenSMTPD installation.
- Server-side exploitation: First, the attacker must connect to the
OpenSMTPD server (which accepts external mail) and send a mail that
creates a bounce. Next, when OpenSMTPD connects back to their mail
server to deliver this bounce, the attacker can exploit OpenSMTPD's
client-side vulnerability. Last, for their shell commands to be
executed, the attacker must (to the best of our knowledge) crash
OpenSMTPD and wait until it is restarted (either manually by an
administrator, or automatically by a system update or reboot).
We developed a simple exploit for this vulnerability and successfully tested it against OpenBSD 6.6 (the current release), OpenBSD 5.9 (the first vulnerable release), Debian 10 (stable), Debian 11 (testing), and Fedora 31.
The fix is delivered in OpenSMTPD 6.6.4p1, available here, which the developer recommends installing “AS SOON AS POSSIBLE.”
|
|
Packages | Stable | Bug Report | Very Low | Critical | [gtk-2] Severe problems with GTK2-applications | Unconfirmed | |
Task Description
Description: Since the migration to xenocara there seems to be a bug with applications using GTK-2. From time to time there are crashes with assertion `!xcb_xlib_threads_sequence_lost’.
Looking into this a little bit more deep there are also other distributions affected and this is an upstream-bug. But the concrete situation is not that easy, while it could be also part of the library libX11 itself. Looking therefore here: https://bugs.launchpad.net/ubuntu/+source/pcmanfm/+bug/1782984
Affected are for example LXDE in general, icedove, iceweasel and many more!
|
|
Packages | Stable | Freedom Issue | Very Low | Critical | [keybase] Complete removal of tool | Unconfirmed | |
Task Description
There is only the source code of the client available and since years nothing more happened. With keybase joining “Zoom” nothing more seems to happen. Look also here in the forum: https://forums.hyperbola.info/viewtopic.php?id=368
|
|
Packages | Any | Security Issue | Very High | Critical | [grub2] UEFI SecureBoot vulnerability + multiple flaws ... | Unconfirmed | |
Task Description
https://www.debian.org/security/2020-GRUB-UEFI-SecureBoot/
https://9to5linux.com/grub2-boot-failure-issues-fixed-in-debian-and-ubuntu-update-now
|
|
Packages | Any | Update Request | Medium | High | Make Knock patch for Linux-libre 4.14 LTS | Unconfirmed | |
Task Description
The Knock patches for linux-libre maintained by you at https://git.hyperbola.info:50100/kernels/knock.git/ have support up to linux-libre 4.13 only (and I think it didn’t work for it when I tried it, compilation failed) but from all of those supported versions, the newest maintained generation by the upstream is 4.9.x
However, since newer kernel generations might require reprogramming the patch, I want to request it only for the latest LTS generation which is 4.14. As you know, LTS software are supported for a long time, so it’s worth to make it for linux-libre 4.14.x
This might not be really important for Hyperbola in the short term, but you are the maintainers of the TCP Stealth implementation for Linux-libre and I and maybe other people would like to use it in their projects for newer versions.
Plus, it would be great since while 4.9 kernels can use the GRSec+Knock combination like linux-libre-lts-unofficial-grsec-knock, with support for 4.14 anyone would be able to use a combination of newer patches such as Linux-hardened+Knock (Linux-hardened supports 4.14 and 4.15 as of now) which is what I’d like to do. https://github.com/copperhead/linux-hardened/releases
|
|
Packages | Any | Bug Report | Very Low | High | Desite "noauto" specified in /etc/fstab all devices get... | Unconfirmed | |
Task Description
Description:
I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.
Who can help me, not to mount a device during boot?
|
|
Packages | Any | Implementation Request | Very Low | High | [glom]: should depend on libgda | Unconfirmed | |
Task Description
Description:
glom cannot run without libgda, so it should depend on libgda package
|
|
Packages | Stable | Bug Report | Very Low | High | java cacerts file is empty | Unconfirmed | |
Task Description
/etc/ssl/certs/java/cacerts has 0 entries, resulting in ssl handshake errors in java applications.
Package versions: * ca-certificates 20170307-1 * ca-certificates-utils 20170307-1
|
|
Services | Wiki Page Issue | Bug Report | Very Low | High | HTML design on Wiki not readable | Unconfirmed | |
Task Description
The wiki pages look really too narrow and not readable on even half a screen of the laptop.
|
|
Packages | Any | Update Request | Very Low | High | [proj]: please update to latest version | Unconfirmed | |
Task Description
Description:
https://proj4.org/index.html
This package have valuable geodetic applications, and I intend to present Hyperbola GNU/Linux-libre soon in universities and schools in East Africa.
The coordinate system there is not WGS84 and this package only in new version is providing the conversion from East African geographic coordinates to WGS84, and will be very usable in many industrial and private applications.
|
|
Packages | Any | Security Issue | Very Low | High | [octopi] requires su | Unconfirmed | |
Task Description
would it be possible to make it use sudo instead?
From what I know, sudo is safer. Let me know if you agree this is a problem.
|
|
Packages | Any | Bug Report | Very Low | High | [kdelibs4support] XDG_RUNTIME_DIR not set | Unconfirmed | |
Task Description
Description:
This bug only appears when logged in as root on terminal
# kf5-config --version
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Qt: 5.8.0
KDE Frameworks: 5.33.0
kf5-config: 1.0
Additional info:
* package version(s)
$ pacman -Si kdelibs4support
Repositorio : extra
Nombre : kdelibs4support
Versión : 5.33.0-1
Descripción : Porting aid from KDELibs4
Arquitectura : x86_64
URL : https://community.kde.org/Frameworks
Licencias : LGPL
Grupos : kf5-aids
Provee : Nada
Depende de : kunitconversion kitemmodels kemoticons kded kparts
Dependencias opcionales : Nada
En conflicto con : kde4support
Remplaza a : kde4support
Tamaño de la descarga : 3,03 MiB
Tamaño de la instalación : 17,36 MiB
Encargado : Felix Yan <felixonmars@archlinux.org>
Fecha de creación : jue 13 abr 2017 14:29:47 -05
Validado por : Suma MD5 Suma SHA-256 Firma
Steps to reproduce:
- Install KDE plasma
|
|
Packages | Any | Bug Report | Very Low | High | [blueman] org.freedesktop.DBus.Error.NameHasNoOwner | Unconfirmed | |
Task Description
Description:
org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name ‘org.bluez.obex’: no such name
Additional info: * package version(s)
$ pacman -Si blueman
Repositorio : community
Nombre : blueman
Versión : 2.0.4-3
Descripción : GTK+ Bluetooth Manager
Arquitectura : x86_64
URL : https://github.com/blueman-project/blueman
Licencias : GPL
Grupos : Nada
Provee : Nada
Depende de : bluez bluez-libs gtk3 libnotify python-cairo python-dbus
python-gobject
Dependencias opcionales : dnsmasq: Network Access Point (NAP) support
networkmanager: Dial Up Networking (DUN) and Personal Area
Networking (PAN) support
pulseaudio-bluetooth: audio devices support
En conflicto con : Nada
Remplaza a : Nada
Tamaño de la descarga : 1814,18 KiB
Tamaño de la instalación : 5345,00 KiB
Encargado : Felix Yan <felixonmars@archlinux.org>
Fecha de creación : dom 25 dic 2016 12:00:42 -05
Validado por : Suma MD5 Suma SHA-256 Firma
* config and/or log files etc.
(blueman-applet | ccze -A): - https://paste.debian.net/plain/1049476
(pkgfile -l blueman): - https://paste.debian.net/plain/1049477
Steps to reproduce:
- Install blueman
|
|
Packages | Any | Bug Report | Low | High | [kaccounts-integration] option to add NextCloud/OwnClou... | Unconfirmed | |
Task Description
Description:
Additional info: * package version(s)
* config and/or log files etc.
Steps to reproduce:
|
|
Packages | Any | Bug Report | Low | High | [kdenetwork-kopete] clicking to add an Jabber Account o... | Unconfirmed | |
Task Description
Description:
Additional info: * package version(s)
* config and/or log files etc.
Steps to reproduce:
|
|
Packages | Any | Freedom Issue | Very Low | High | [gitlab] systemd reference & command not found during i... | Unconfirmed | |
Task Description
(14/14) installing gitlab [##############################] 100% /tmp/alpm_bCqhHf/.INSTALL: line 2: systemd-tmpfiles: command not found
|
|
Packages | Stable | Freedom Issue | Very Low | High | GNU Privacy Assistant (GPA) | Unconfirmed | |
Task Description
Hello Hyperbola!
GPA gives out the following errors upon opening the app.
First:
``` The GPGME library returned an unexpected error at confdialog.c:1459. The error was:
Unsupported protocol
This is either an installation problem or a bug in GPA. GPA will now try to recover from this error. ```
Second:
``` Fatal Error in GPGME library (invoked from file options.c, line 302):
Unsupported protocol
The application will be terminated
What can I do to overcome these errors? ``` As this issue makes gpa app completely unusable, I have set this bug report’s severity as high.
I also request the admin to set priority to high due to it’s severity.
Thank you!
Regards, RG.
|
|
Packages | Any | Bug Report | Very Low | High | groff: package not built with URW fonts properly or suc... | Unconfirmed | |
Task Description
Description:
groff is typesetting system similar to TeX/LaTeX however, it is very small and very usable. It is not built properly with URW fonts, or such are missing, I cannot know all details. Overall groff package is basically somehow broken.
It shall depend on proper fonts, and such fonts should already be built, including their Unicode versions.
Package is only partially built.
|
|
Packages | Any | Implementation Request | Very Low | High | Add MPTCP (MultiPath TCP) to Hyperbola | Unconfirmed | |
Task Description
https://aur.archlinux.org/packages/linux-mptcp/
Kernel Patch for 4.9 : http://multipath-tcp.org/patches/mptcp-v4.9-c88d1d56809e.patch
Compile : https://multipath-tcp.org/pmwiki.php/Users/DoItYourself
|
|
Packages | Stable | Bug Report | Very Low | High | [vlc] DVB : cache_block stream error: cannot pre fill b... | Unconfirmed | |
Task Description
Current VLC version (3.0.4-3.hyperbola1.backports1) fails to play DVB stream using a RTL2832 usb dongle.
I start the playlist like this :
vlc channels.conf
but it returns the following error :
cache_block stream error: cannot pre fill buffer
Also, it asks the user to be in “video” group to access DVB device, this was not needed before with Hyperbola 0.2.9. User being in “wheel” was enough. Anyway, even after adding my user to video group, it still fails with “cache_block stream error: cannot pre fill buffer”
This is not an issue with my DVB adapter or driver. rtl2832 is correctly loaded. And I can play the channels.conf playlist just fine with “mpv” or “mplayer”. Also, the channels.conf used works just fine with a more recent version of VLC on an other system (Manjaro) so something is broken with the current VLC used.
Maybe a package bump would fix the issue.
|
|
Installation | General | Freedom Issue | Very Low | High | [openbox] provides nonfree software support in the menu | Unconfirmed | |
Task Description
my recommended fix, make it reflect the applications that are actually installed on the system after removing non-free software support.
|
|
Installation | General | Freedom Issue | Very Low | High | FS#1445 - [fluxbox] provides nonfree software support i... | Unconfirmed | |
Task Description
recommended fix, remove non-free software entries in menu and replace them with applications that actually exist.
|
|
Packages | Any | Bug Report | Very Low | High | [rubyripper] GUI doesn't work | Unconfirmed | |
Task Description
rrip_gui does not work. The fix is to install cairo-gobject which is not in the repos. Attached is a working PKGBUILD adapted from the official one.
|
|
Packages | Stable | Bug Report | Very Low | High | [nftables] init service ERROR: nftables failed to start | Unconfirmed | |
Task Description
Error: conflicting protocols specified: inet-service vs. icmp
when using
ip protocol icmp icmp type echo-request counter accept comment “accept ICMP echo-request type” ip6 nexthdr icmpv6 icmpv6 type { destination-unreachable, packet-too-big, time-exceeded, parameter-problem, mld-listener-query, mld-listener-report, mld-listener-reduction, nd-router-solicit, nd-router-advert, nd-neighbor-solicit, nd-neighbor-advert } accept comment “Accept ICMPv6”
It is a known bug on 0.7 and solved on 0.9
https://bugzilla.netfilter.org/show_bug.cgi?id=1073 commit 0011985554e269e1cc8f8e5b41eb9dcd795ebe8c fixes this problem upstream.
|
|
Packages | Any | Update Request | Very Low | High | [mpv] request for package bump | Unconfirmed | |
Task Description
Hello,
Would it be possible to get a package bump for mpv ?
Currently, Debian Buster (stable) uses 0.29.1-1. This would be great as it introduces many fixes and support for lua scripts I heavily use. 0.29.* requires a ffmpeg to 4.x series as well.
Thanks.
|
|
Packages | Any | Update Request | Medium | High | [php] is out of date/support | Unconfirmed | |
Task Description
Description:
From official PHP page, our php 7.1 is out of support and security
Our package : https://www.hyperbola.info/packages/extra/x86_64/php/
PHP page : https://www.php.net/supported-versions.php
|
|
Packages | Any | Freedom Issue | Very Low | High | Synergy en teclado en español no tiene tildes ni ñ | Unconfirmed | |
Task Description
Description: Share a single mouse and keyboard between multiple computers, with libressl and OpenRC support
Issue: Synergy no es capas de trasmitir tildes ni eñes y demás caracteres del español españa
Additional info: * package version(s): community/synergy 1.8.8-2.hyperbola1 * config and/or log files etc.
Steps to reproduce: instalarar synergy en 2 PCs con hyperbola 0.3, he intentar escribir tildes, no funcionará...
|
|
Services | Mail Service Issue | Security Issue | Very Low | High | Please "support" TLS 1.2 instead of requiring it for em... | Unconfirmed | |
Task Description
The requirement for TLS 1.2 in email effectively isolated us from internet, and yelling for change isn’t working even in communications with other free/libre system distributions and mailing lists related to free/libre software (both for software and for discussions related to the movement itself). :)
Many mailing lists at gnu.org, fsf.org, fsfla.org, libreplanet.org, and also in other free/libre system distributions aren’t accessible (e.g.: Trisquel).
|
|
Packages | Stable | Bug Report | Very Low | Medium | [kodi-addons-visualization] addons don't work | Unconfirmed | |
Task Description
After installation, none of the addons is present in Kodi!
|
|
Services | HyperWiki/DokuWiki | Implementation Request | Medium | Medium | Libreboot hardening grub guide | Unconfirmed | |
Task Description
I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,
https://libreboot.org/docs/gnulinux/grub_hardening.html
I wondered if there is anything different that needs to be done to get this part done:
gpg –homedir keys –detach-sign my.initramfs gpg –homedir keys –detach-sign my.kernel gpg –homedir keys –detach-sign libreboot_grub.cfg gpg –homedir keys –detach-sign my.grubtest.cfg
it gives me a bunch of weird errors
|
|
Packages | Any | Privacy Issue | Very Low | Medium | [avahi] avahi publishes the hostname by default | Unconfirmed | |
Task Description
By default, the ‘disable-publishing’ parameter in the [publish] section of avahi-daemon.conf is set to ‘no’, which can be seen in my opinion as a privacy issue as avahi broadcasts the hostname without the user’s consent even though this has been explicitly disabled in the settings of networkmanager.
|
|
Services | Wiki Page Issue | Implementation Request | Very Low | Medium | Add notification/subscription capabilities when a page ... | Unconfirmed | |
Task Description
After talking to Emulatorman, we think this would be a nice feature to add to our Hyperwiki to be able to subscribe to the original page in English to help tracking changing to the translated pages. This implies to add the email notifications to the dokuwiki system
|