All Projects

ProjectCategoryTask TypePrioritySeverity  descSummaryStatusProgress
PackagesTestingImplementation RequestLowMedium[spacefm] add new packageIn Progress
0%
Task Description

Add SpaceFM File Manager for Hyperbola

Aur Package: spacefm Debian Package: spacefm

PackagesTestingBug ReportMediumMedium[emacs] crush after swayResearching
0%
Task Description

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

PackagesTestingImplementation RequestMediumMediumlinux-libre-lts-hypersec: New package with extra securi...Deferred
0%
Task Description

Description: Per a user request and to better secure the kernel, we can embed the cryptsetup and ciphers in the kernel. This would mean rather than exposed modules, they are built-in to the kernel and ready to use even without an intramfs.

To be embedded: ciphers aes, twofish, serpent; sha256, sha512 - and the necessary modules (don’t forget the block modes xts, lvm and cryptsetup ...)

Additionally, we could include USB Guard and any other features that meet our social contract and security outlook.

PackagesTestingReplace RequestVery LowMedium replace request: NetworkManager with wpa_cuteUnconfirmed
0%
Task Description

https://github.com/loh-tar/wpa-cute/releases

I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.

I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)

or 2019 january. :)

WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:

https://wiki.archlinux.org/index.php/Wpa_supplicant:

Password-related problems

wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.

In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:

# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf

In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed.
Problems with eduroam and other MSCHAPv2 connections

This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.

but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.

It says it cannot get the status of wpa_supplicant when I load it.

This could be an issue if you get rid of NetworkManager for some users.

So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)

PackagesTestingFeature RequestVery LowMedium[Hyperbola GNU/Linux-Libre 0.4] [lumina-core] Replace t...Unconfirmed
0%
Task Description

Also known as “Replace the distributor logo as the startup dialogue, and app menu and start button icons from generic” in the long title because of character limitation.

If the distributor logo icon isn’t present, simply insert it and link few others into the appropriate paths that I made and attached below there.

Here is the list of the paths you do:

/usr/share/icons/material-design-{dark,light}/scalable/places/:

  • distributor-logo.svg
  • distributor-logo-hyperbola.svg (symlink of * distributor-logo.svg)
  • start-here{,-hyperbola,-lumina}.svg (symlink of distributor-logo.svg)
PackagesTestingBug ReportMediumMedium[Hyperbola GNU/Linux 0.4] Problems with touch- / trackp...Assigned
0%
Task Description

Description: Not finally tested, only getting the logs from chat within here for better analysis later on. User reported that touchpad is not working for now with Hyperbola GNU/Linux 0.4. dmesg-messagelog:

[anonymous@anonymous ~]$ dmesg | grep pad
[ 4.766853] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 4.823723] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0×840300/0x2e800/0×0, board id: 3127, fw id: 8526786

PackagesTestingBug ReportMediumMedium[Hyperbola GNU/Linux 0.4] Problems with ALSA and sndio ...Unconfirmed
0%
Task Description

Description: User reporting problems with sndio. A further check with ALSA showed no active device being used. User has HDMI-sound in usage.

PackagesTestingBug ReportMediumMedium[Hyperbola GNU/Linux-libre 0.4] - Package [android-file...Researching
0%
Task Description

Application is not starting and needs therefore a rework.

PackagesTestingBug ReportVery LowMedium[adwaita-icon-theme] Most symbolic icons look brokenly ...Unconfirmed
0%
Task Description

As the title says, some affected symbolic icons look like on a screencap of the GTK3 Widget Factory we attached below.

PackagesTestingBug ReportVery LowMedium[Hyperbola GNU/Linux-libre 0.4] [numptyphysics] has cra...Unconfirmed
0%
Task Description

This issue affects the game crashed, causing the segmentation fault; it never works and is unplayable.

A few lines of errors appeared here from Numpty Physics. It reads:

[    0ms] [Os.cpp:278 INFO] Got locale: "en_GB.UTF-8", using "en"
[    0ms] [Os.cpp:283 INFO] No translation file for en, send a pull request
Segmentation fault
ServicesWiki Page IssueImplementation RequestVery LowMediumAdd notification/subscription capabilities when a page ...Unconfirmed
0%
Task Description

After talking to Emulatorman, we think this would be a nice feature to add to our Hyperwiki to be able to subscribe to the original page in English to help tracking changing to the translated pages.
This implies to add the email notifications to the dokuwiki system

Software Developmentchroot-nspawnBug ReportMediumMedium[chroot-nspawn] Create mount points if mountpoint exit ...Unconfirmed
0%
Task Description

The actual behavior is to create mount points if mountpoint exits with exit status 1, however it may also exit with code 32 and thus creating a real mess:

$ sudo chroot-nspawn
Spawning container megver83 on /var/lib/archbuild/chroot1/megver83
Press ^] three times within 1s to kill container.
mount: /sys/fs/cgroup: mount point does not exist.
mkdir: cannot create directory '/sys/fs/cgroup/blkio': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/cpu': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/cpuacct': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/cpu,cpuacct': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/cpuset': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/devices': No such file or directory  
mkdir: cannot create directory '/sys/fs/cgroup/freezer': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/memory': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/net_cls': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/net_cls,net_prio': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/net_prio': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/pids': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/systemd': No such file or directory
mount: /sys/fs/cgroup/blkio: mount point does not exist.
mount: /sys/fs/cgroup/cpuset: mount point does not exist.
mount: /sys/fs/cgroup/devices: mount point does not exist.
mount: /sys/fs/cgroup/freezer: mount point does not exist.
mount: /sys/fs/cgroup/memory: mount point does not exist.
mount: /sys/fs/cgroup/pids: mount point does not exist.

So I created a patch to fix this.

P.S.: although I can git clone the repo with ssh access, whenever I do a push I get:

error: remote unpack failed: unable to create temporary object directory
To ssh://git.hyperbola.info:51100/~git/software/chroot-nspawn.git
 ! [remote rejected] master -> master (unpacker error)
error: failed to push some refs to 'ssh://git.hyperbola.info:51100/~git/software/chroot-nspawn.git'

Do I have the permission to write in this repo? If not, I’d like it, as I’m planning to improve this great script

PackagesAnyReplace RequestLowLow[appmenu-qt4] replace with appmenu-qt (qt5)Deferred
0%
Task Description

“appmenu-qt4”[0][2] is a deprecated package (release in 2012)[1] and use qt4 unsupported/non-lts software[3], but “appmenu-qt5” not contains any release source code[2]

$ pacman -Si appmenu-qt4
Repository : community
Name : appmenu-qt4
Version : 0.2.6-1
Description : Export Qt4 applications menus over D-Bus
Architecture : x86_64
URL : https://launchpad.net/appmenu-qt Licenses : GPL Groups : None
Provides : None
Depends On : libdbusmenu-qt4
Optional Deps : None
Conflicts With : appmenu-qt
Replaces : appmenu-qt
Download Size : 16.55 KiB
Installed Size : 48.00 KiB
Packager : Antonio Rojas arojas@archlinux.org Build Date : Tue 28 Feb 2017 05:59:31 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature

[0]:https://launchpad.net/appmenu-qt (qt4)
[1]:https://launchpad.net/appmenu-qt/+download [2]:https://launchpad.net/appmenu-qt5 [3]:https://en.wikipedia.org/wiki/Qt_5.6_LTS

PackagesAnyImplementation RequestVery LowLow[3proxy] add package since it's useful for tor on ftp p...Deferred
0%
Task Description

Add “3proxy”[0] package

Useful for tor on ftp proxy[1]

[0]:https://github.com/z3APA3A/3proxy [1]:https://trac.torproject.org/projects/tor/wiki/doc/TorifyHOWTO/FTP

PackagesAnyFeature RequestVery LowLow[i3lock-color] adding package into pacmanDeferred
0%
Task Description

We already have i3lock, this version is an enhanced version available in Arch AUR:
https://aur.archlinux.org/packages/i3lock-color https://aur.archlinux.org/packages/i3lock-color-git/

PackagesAnyImplementation RequestVery LowLow[plymouth] add packageDeferred
0%
Task Description

Plymouth is an application that runs very early in the boot process (even before the root filesystem is mounted!) that provides a graphical boot animation while the boot process happens in the background.

Please implement plymouth as an optional package.

PackagesAnyImplementation RequestVery LowLow[multipath-tools] add packageDeferred
0%
Task Description

Hello,

Could it be possible to add this package :

multipath-tools

“Multipath tools for Linux (including kpartx)”

License : GPL2

to the repo ?

Thank you

PackagesAnyImplementation RequestVery LowLow[thinkfan] add packageDeferred
0%
Task Description

Could it be possible to add this package :

thinkfan

“A minimalist fan control program. Supports the sysfs hwmon interface and thinkpad_acpi”

License : GPL

to the repo ?

Thanks

PackagesAnyImplementation RequestLowLow[nut] add Network UPS Tools 2.7.x packageAssigned
0%
Task Description

Add “nut” package.

Useful for uninterruptible power supplies, power distribution units, solar controllers and servers power supply units.

PackagesAnyImplementation RequestLowLow[codecrypt] add new packageUnconfirmed
0%
Task Description

This is a GnuPG-like unix program for encryption and signing that uses only quantum-computer-resistant algorithms:

  McEliece cryptosystem (compact QC-MDPC variant) for encryption
  Hash-based Merkle tree algorithm (FMTSeq variant) for digital signatures

Codecrypt is free software. The code is licensed under terms of LGPL3 in a good hope that it will make combinations with other tools easier.

PackagesAnyImplementation RequestVery LowLow[fsearch] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

fsearch

https://github.com/cboxdoerfer/fsearch

License : GPL

PackagesAnyImplementation RequestVery LowLow[flowblade] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

flowblade

https://www.parabola.nu/packages/pcr/any/flowblade/

“a multitrack non-linear video editor for GNU/Linux”

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[whipper] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

whipper

“A Unix CD ripper aiming for accuracy over speed – forked from morituri”

https://www.parabola.nu/packages/community/any/whipper/ https://github.com/JoeLametta/whipper

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[sacd-extract] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

sacd-extract

“Extract DSD files from an SACD image”

https://www.parabola.nu/packages/pcr/x86_64/sacd-extract/ https://sourceforge.net/p/sacd-ripper/

License : GPL2

Thanks

PackagesAnyImplementation RequestVery LowLow[radiotray] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add :

radiotray

“An online radio streaming player that runs on a Linux system tray.”

https://aur.archlinux.org/packages/radiotray/

License : GPL

Thanks

PackagesAnyFeature RequestVery LowLow[nextcloud-client] add packageUnconfirmed
0%
Task Description

I use Nextcloud for syncing, although, I would normally not ask for this, due to Nextcloud’s appimage being available, but for some reason the latest version doesn’t work on hyperbola. So... yeah.

Usually Nextcloud’s appimage works regardless of what packages you have, so I guess in essence... add Nextcloud-client package to this system is my request.

PackagesAnyImplementation RequestVery LowLow[ttf-font-awesome] add ttf-font-awesome fontUnconfirmed
0%
Task Description

Could it be possible to add :

ttf-font-awesome

to the repo ?

https://www.parabola.nu/packages/community/any/ttf-font-awesome/ http://fontawesome.io/

Thanks

PackagesAnyImplementation RequestVery LowLow[awesome-terminal-fonts] add packageUnconfirmed
0%
Task Description

Could it be possible to add :

awesome-terminal-fonts

to the repo please ?

https://www.parabola.nu/packages/community/any/awesome-terminal-fonts/ https://github.com/gabrielelana/awesome-terminal-fonts

Thanks

PackagesAnyImplementation RequestVery LowLow[w_scan] add package Unconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

w_scan

“Universal ATSC and DVB blind scanner”

https://aur.archlinux.org/packages/w_scan/

License : GPL

Thanks

PackagesAnyImplementation RequestVery LowLow[qpdfview] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

qpdfview

“A tabbed PDF viewer using the poppler library.”

https://www.parabola.nu/packages/community/x86_64/qpdfview/

License : GPL2

Thanks

PackagesAnyImplementation RequestVery LowLow[menulibre] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

menulibre

“An advanced menu editor that provides modern features in a clean, easy-to-use interface. All without GNOME dependencies”

https://aur.archlinux.org/packages/menulibre/

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[crunch] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

crunch

“A wordlist generator where you can specify a standard character set or a character set you specify and generate all possible combinations and permutations.”

https://aur.archlinux.org/packages/crunch/

License : GPL2

Thanks

PackagesAnyImplementation RequestVery LowLow[dmg2img] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

dmg2img

“A CLI tool to uncompress Apple’s compressed DMG files to the HFS+ IMG format”

https://aur.archlinux.org/packages/dmg2img/

License : GPL2

Thanks

PackagesAnyFeature RequestMediumLow[cinnamon] add elogind supportResearching
0%
Task Description

Cinnamon currently does not support elogind, and depends on systemd. A patch is needed to fix this issue.

PackagesAnyImplementation RequestVery LowLow[gcdemu] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

gcdemu

“GNOME panel applet controlling cdemu-daemon”

https://aur.archlinux.org/packages/gcdemu

http://cdemu.sourceforge.net/

License : GPL2

Thanks

PackagesAnyImplementation RequestVery LowLow[python-cheat] add package Unconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

python-cheat

“Cheat allows you to create and view interactive cheatsheets on the command-line.”

https://aur.archlinux.org/packages/python-cheat/

https://github.com/chrisallenlane/cheat

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[accuraterip-checksum] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

accuraterip-checksum

“A C99 commandline program to compute the AccurateRip checksum of singletrack WAV files”

https://www.parabola.nu/packages/community/x86_64/accuraterip-checksum/

License : GPL

Thanks

PackagesAnyImplementation RequestVery LowLow[pacpl] Add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

pacpl

“Convert multiple audio types from one format to another.”

https://aur.archlinux.org/packages/pacpl/

License : GPL

Dependencies needed (and currently missing in Hyperbola repo) :

perl-ogg-vorbis-header perl-mp4-info perl-mp3-tag perl-audio-flac-header perl-audio-musepack perl-parallel-forkmanager perl-cddb
PackagesAnyImplementation RequestVery LowLow[gmusicbrowser] Add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

gmusicbrowser

“A customizable open-source jukebox for large collections”

https://www.parabola.nu/packages/pcr/any/gmusicbrowser/

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[quiterss] add package Unconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

quiterss

“Fast and light RSS/Atom feed reader written in Qt/С++”

https://aur.archlinux.org/packages/quiterss

License : GPL3

Thanks

PackagesAnyImplementation RequestVery LowLow[wekan] add package Unconfirmed
0%
Task Description

Hello,

Would it be possible to add this package :

wekan

“Wekan is an completely Open Source and Free software collaborative kanban board application”

https://github.com/wekan/wekan

License : MIT

Thanks

PackagesAnyImplementation RequestVery LowLow[moloch] add package Unconfirmed
0%
Task Description

Hello,

Would it be possible to add this package :

moloch

“ Moloch is an open source, large scale, full packet capturing, indexing, and database system.”

http://molo.ch

https://github.com/aol/moloch

License : Apache2

Thanks

PackagesAnyFeature RequestLowLow[scribus] missing hunspell supportUnconfirmed
0%
Task Description

I have noticed that the version of scribus that is available in hyperbola does not have the option of spelling correction and by references of the official scribus channel indicate that scribus has to be built with hunspell. I do not understand how that is done, I just need to be able to correct spelling from scribus.

PackagesAnyBug ReportVery LowLow[remmina] impossible to connect to RDP servers after re...Unconfirmed
0%
Task Description

remmina dev ask to inform package maintainer, here is the discussion:

https://github.com/FreeRDP/Remmina/issues/1513#issuecomment-373128671

Would be nice to update or add a patch if available

PackagesAnyImplementation RequestMediumLowScid vs. PC – PGN Reader/ChessBaseUnconfirmed
0%
Task Description

http://scidvspc.sourceforge.net/

PackagesAnyImplementation RequestMediumLowStockfish Chess EngineUnconfirmed
0%
Task Description

«Unlike most chess engines, Stockfish is open source (GPL license). That means you can read the code, modify it, contribute back, and even use it in your own projects.» I do not know if it is libre. If it is, together with Scid, Hyperbola is one step closer for every chess lover out there who also loves freedom!
https://stockfishchess.org/

PackagesAnyImplementation RequestVery LowLow[powerpill] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

powerpill

“Pacman wrapper for faster downloads.”

https://aur.archlinux.org/packages/powerpill/

https://xyne.archlinux.ca/projects/powerpill

License : GPL

Thanks

PackagesAnyImplementation RequestVery LowLow[flacon] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

flacon

“Extracts individual tracks from one big audio file containing the entire album of music and saves them as separate audio files.”

https://aur.archlinux.org/packages/flacon/

https://flacon.github.io/

License : LGPL2.1

Thanks

PackagesAnyImplementation RequestVery LowLow[gogs] add packageUnconfirmed
0%
Task Description

Hello,

It would be great to add this package :

gogs

“Self Hosted Git Service written in Go”

https://aur.archlinux.org/packages/gogs

openrc init scripts : https://aur.archlinux.org/packages/gogs-openrc

License : GPL

Thanks

PackagesAnyImplementation RequestVery LowLow[gimagereader] add packageUnconfirmed
0%
Task Description

Hello,

Could it be possible to add this package :

gimagereader

“A graphical frontend to tesseract-ocr”

https://aur.archlinux.org/packages/gimagereader

License : GPL3

Thanks

Showing tasks 151 - 200 of 514 Page 4 of 11<<First - 2 - 3 - 4 - 5 - 6 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing