All Projects

Description:

community/shorewall 5.1.4-1
     An iptables-based firewall for Linux systems

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/snownews 1.5.12-9
     Text mode RSS newsreader for Linux and Unix.

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/squashfs-tools 4.3-4
     Tools for squashfs, a highly compressed read-only filesystem for Linux.

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/tea 43.1.0-5
     A Qt-based text editor for Linux and *BSD. With an ultimate small size TEA provides you hundreds of functions

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/tenshi 0.15-2
     real-time log monitor from the Gentoo Linux project

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/tilda 1.3.3-2
     A Gtk based drop down terminal for Linux and Unix

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/tinyserial 20090305-2
     Small minicom replacement for accessing serial ports on Linux inspired by FreeBSD 'tip'

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/usb_modeswitch 2.5.0-1
     Activating switchable USB devices on Linux.

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/ussp-push 0.11-6
     OBEX object pusher for Linux

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/wireshark-cli 2.2.6-1
     a free network protocol analyzer for Unix/Linux and Windows - CLI version

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

I would remove Unix and Windows from description as those words steer users towards non-free proprietary software.

Description:

community/wireshark-gtk 2.2.6-1
     a free network protocol analyzer for Unix/Linux and Windows - GTK frontend

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Please remove references to proprietary software.

Description:

community/wireshark-qt 2.2.6-1
     a free network protocol analyzer for Unix/Linux and Windows - Qt frontend

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/wxcam 1.1-9
     Webcam application for linux

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

community/xwax 1.6-1
     Open-source vinyl emulation software for Linux.

See:
https://www.gnu.org/philosophy/words-to-avoid.html#Linux

Description:

The URL in description http://kmymoney2.sourceforge.net/ is not working

Repository      : community
Name            : kmymoney
Version         : 4.8.0-4
Description     : Personal finance manager for KDE which operates
                  similarly to MS-Money or Quicken
Architecture    : x86_64
URL             : http://kmymoney2.sourceforge.net/
Licenses        : GPL
Groups          : None
Provides        : None
Depends On      : kdebase-runtime  shared-mime-info  aqbanking
                  libofx  libalkimia  boost-libs  kdepimlibs4
Optional Deps   : None
Conflicts With  : None
Replaces        : kmymoney2
Download Size   : 21.92 MiB
Installed Size  : 47.08 MiB
Packager        : Antonio Rojas <arojas@archlinux.org>
Build Date      : Fri 28 Oct 2016 12:21:04 AM CEST
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Description:

I just guess that this script cleanup_digikamdb depends on kreadconfig which is not there.

Additional info:

extra/digikam 5.5.0-2.hyperbola1 [installed]

  Digital photo management application for KDE

Steps to reproduce:

$ cleanup_digikamdb

/usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found

                  Cleanup Databases v1.1 (digiKam )                    

————————————————————————-
/usr/bin/cleanup_digikamdb: line 61: kreadconfig: command not found
This program only handles SQLite databases.
[~]

Description:

Tuxcards is seemingly published under some GPL license, on the splash screen I did not see which one.

The splash screen claims it is Donationware, which is bringing confusion.

Picture: https://gnu.support/images/issues/2018-06-17-21:35:41.png

Reference: https://en.wikipedia.org/wiki/Donationware

So either the splash screen shall be removed, as it is donationware, or author contacted, or package removed as it is unclear if it is free software or donationware. Free software can be sold, and if it is sold, then such software shall not ask for donations again in my opinion.

Description:

I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.

Who can help me, not to mount a device during boot?

So avatar uploading is not working well, and picture is getting minimized to nothing.

Description:

simh is very nice simulator.

Yet it is unclear the license for the ROM file: /usr/lib/simh/ka655x.bin and if license is not free and/or source of VAX ROM is missing, this package is not free.

Description:

glom cannot run without libgda, so it should depend on libgda package

Description:

A nice Git service would be welcomed in our pacman.

- https://github.com/go-gitea/gitea

- https://www.archlinux.org/packages/community/x86_64/gitea/

Hello,

Could it be possible to add this package :

exifread

“Python library to extract EXIF data from tiff and jpeg files”

https://aur.archlinux.org/packages/exifread/

Thanks

Name: Privacy Settings
Version: 0.2.6 (compatible Firefox version 52.* to 56.*)
Author: Jeremy Schomery (j_schomery)
Licence: Mozilla Public Licence (MPL) 2.0
Source code: Github
Description: Alter Firefox’s built-in privacy settings easily with a toolbar panel.

Name: Classic Theme Restorer
Version: 1.7.7.2 (compatible Firefox version 45.* to 56.*)
Author: Aris (Aris-t2)
Licence: Mozilla Public Licence (MPL) 2.0
Source code: Github
Description: Squared tabs, application menu, add-on bar, small button view and many more ‘old’ features for ‘Firefox 29-56’, not for Firefox 57+!

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:

07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.

After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

1:2.8 or later, qemu-kvm

This would make qemu so much easier and faster, please support this package.

According to : https://github.com/thestinger/hardening-wrapper-deprecated

Wrapper scripts for building hardened executables by default (deprecated, replaced by standard Arch Linux toolchain changes)

Could it be possible to add :

obmenu-generator

A fast pipe/static menu generator for the Openbox Window Manager (with icons support)

License : GPL3

https://github.com/trizen/obmenu-generator https://www.parabola.nu/packages/pcr/x86_64/obmenu-generator/

Thanks

/etc/ssl/certs/java/cacerts has 0 entries, resulting in ssl handshake errors in java applications.

Package versions:
* ca-certificates 20170307-1
* ca-certificates-utils 20170307-1

Name: New Tab Tools
Version: 81 (compatible Firefox version 52)
Source code: Github
Description: Customize Firefox’s. Tabs Page

https://github.com/darktrojan/newtabtools

https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/

The package appears in parabola’s pcr repository. I modified the AUR PKGBUILD to compile the last stable version (and the installation works fine). Please add this package to the official repos.

https://aur.archlinux.org/packages/dreamchess-git/ https://www.parabola.nu/packages/pcr/x86_64/dreamchess-git/

I tried to extract a RAR v5 archive using unar that works fine when using the non-free unrar.

Here is the log (with the file name altered)

$ unar file.part1.rar
file.part1.rar: RAR 5

file.mp4  (-2144860915 B)... Failed! (Attempted to read more data than was available)

Extraction to current directory failed! (1 file failed.)

Please add in the FAQ that newer RAR archives (version 5) may not work when using unar.

Erika is a Python GTK+ podcast manager using webkitgtk.

Erika is released under the MIT License, with the exception of the file erika/frontend/widgets/scrolled_window.py which is released under the GNU/GPLv3 License.

Attached is a PKGBUILD for the last stable release based on the AUR one (I moved a few of the dependencies to optdepends). It builds fine and works.

here is the description from the website

https://github.com/ruediger/VobSub2SRT

VobSub2SRT is a simple command line program to convert .idx / .sub subtitles into .srt text subtitles by using OCR. It is based on code from the MPlayer project - a really really great movie player. Some minor parts are copied from ffmpeg/avutil headers. Tesseract is used as OCR software.

vobsub2srt is released under the GPL3+ license. The MPlayer code included is GPL2+ licensed.

The quality of the OCR depends on the text in the subtitles. Currently the code does not use any preprocessing. But I’m currently looking into adding filters and scaling options to improve the OCR. You can correct mistakes in the .srt files with a text editor or a special subtitle editor.

Attached is a working PKGBUILD for the latest stable version.

Hello,

I stumbled upon this music player recently, it is very promising and fully free (GPL3)

“Sayonara is a small, clear and fast audio player for Linux written in C++, supported by the Qt framework. It uses GStreamer as audio backend. Sayonara is open source and uses the GPLv3 license. One of Sayonara’s goals is intuitive and easy usablility. Currently, it is only available for Linux and BSD.

Although Sayonara can be considered as a lightweight player, it holds a lot of features in order to organize even big music collections.”

Latest version is 1.1.1 and it is very stable on my hyperbola system. I think it would be a great addition to Hyperbola repo.

https://sayonara-player.com/

A PKGBUILD is available here :

https://sayonara-player.com/sw/arch_linux/PKGBUILD

Name: FireGestures
Version: 1.11.1 (compatible Firefox version 52)
Source code: Github
Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.

https://github.com/gomita/firegestures/

https://addons.mozilla.org/en-US/firefox/addon/firegestures/

Description:

The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted.
I do have dbus, gvfs & ntfs-3g installed and active services.

Additional info:
* package version(s)
PCManFM 1.2.5 - using LibFM ver. 1.2.5

Steps to reproduce:
Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.

Description:

https://proj4.org/index.html

This package have valuable geodetic applications, and I intend to present Hyperbola GNU/Linux-libre soon in universities and schools in East Africa.

The coordinate system there is not WGS84 and this package only in new version is providing the conversion from East African geographic coordinates to WGS84, and will be very usable in many industrial and private applications.

Similar to systemd, pulseaudio or libpulse is forced upon users as many packages require it such as kodi, gnome-shell (and thus also gdm), ffmpeg, gst-plugins-good, simplescreenrecorder, clementine, empathy, seamonkey (iceape), fluidsynth, mumble and qemu, Most/all of these packages can probably be compiled with pulseaudio or libpulse as an optional dependency instead.

After enabling show-flags via dconf-editor in org.mate.peripherals-keyboard-xkb.indicator the flags don’t show up. The simple workaround is to copy flags you want into ~/.icons/flags (after creating the directory) from here

https://github.com/linuxmint/flags/tree/master/usr/share/iso-flag-png

and then to reboot.

It seems to be this bug:

https://askubuntu.com/questions/1059324/how-to-show-current-keyboard-layout-on-mate-panel-as-country-flag/1059325#1059325

ffmpegthumbnailer does not support some media formats since they do not appear in its configuration file ffmpegthumbnailer.thumbnailer which can be found in /usr/share/thumbnailers/. By editing the file ffmpegthumbnailer.thumbnailer one can add thumbnail support for embedded art in audio formats such as flac and mp3 (using the -m flag) and thumbnail support for webp (a new image format which iceweasel-uxp and gthumb support). I’m attaching my edited file (I just added a few common audio formats and webp and added the -m flag and removed the -f flag).

Description:
GPG does not receive keys from servers. Seems that connection is blocked.

Additional info:
* package version(s)

$ gpg --version 
gpg (GnuPG) 2.2.8
libgcrypt 1.7.6
(...)

* config and/or log files etc.

$ gpg --debug-all --receive-keys B00033B86FDA59BA7D75B89BB88AF90BF64827C5
gpg: reading options from '/home/asm/.gnupg/gpg.conf'
gpg: enabled debug flags: packet mpi crypto filter iobuf memory cache memstat trust hashing ipc clock lookup extprog
gpg: DBG: [not enabled in the source] start
gpg: DBG: chan_3 <- # Home: /home/asm/.gnupg
gpg: DBG: chan_3 <- # Config: /home/asm/.gnupg/dirmngr.conf
gpg: DBG: chan_3 <- OK Dirmngr 2.2.8 at your service
gpg: DBG: connection to the dirmngr established
gpg: DBG: chan_3 -> GETINFO version
gpg: DBG: chan_3 <- D 2.2.8
gpg: DBG: chan_3 <- OK
gpg: DBG: chan_3 -> KS_GET -- 0xB00033B86FDA59BA7D75B89BB88AF90BF64827C5
gpg: DBG: chan_3 <- ERR 219 Server indicated a failure <Fonte não especificada>
gpg: keyserver receive failed: Server indicated a failure
gpg: DBG: chan_3 -> BYE
gpg: DBG: [not enabled in the source] stop
gpg: keydb: handles=0 locks=0 parse=0 get=0
gpg:        build=0 update=0 insert=0 delete=0
gpg:        reset=0 found=0 not=0 cache=0 not=0
gpg: kid_not_found_cache: count=0 peak=0 flushes=0
gpg: sig_cache: total=0 cached=0 good=0 bad=0
gpg: random usage: poolsize=600 mixed=0 polls=0/0 added=0/0
              outmix=0 getlvl1=0/0 getlvl2=0/0
gpg: secmem usage: 0/32768 bytes in 0 blocks

* Useful information:
https://arcolinux.com/fix-for-key-could-not-be-looked-up-remotely/

Unfortunately, the workaround does not work for me. However, it indicate the arch linux package that fixes this issue.

Steps to reproduce:
Just type.

gpg --receive-keys B00033B86FDA59BA7D75B89BB88AF90BF64827C5

Steps to reproduce:
Open from the command line any pdf file with either `zathura-pdf-poppler` or `zathura-pdf-mupdf`, then hit `q` to quit and the terminal will show the following error:

** (zathura:<PID>): CRITICAL **: girara_list_foreach: assertion 'list && list->start && callback' failed

Description:
Something is wrong with the latest version packaged in Hyperbola. zathura-pdf-poppler is unable to process apostrophes displayed in pdf bookmarks.

Steps to reproduce:
Open any pdf file which has a summary included, then hit `Tab` to display the summary. Instead of apostrophes, zathura-pdf-poppler displays html entities while the output of zathura-pdf-mupdf is correct.

Description:

kobodl
Application path: ‘.’ [41] Could not get double buffered display.
[41] Shadow buffer requested; relying on SDL’s shadow buffer.
[279] audio.c: Warning: Requested 1024 samplebuffer, but got 512 samples.
[1148] Loading “Trance1”...
[1148] Copyright (C) David Olofson, 2002.
[1240] Done!
[1240] Loading “Test2”...
[1240] Copyright (C) David Olofson, 2002.
[1240] Done!
[1241] Waveform info:
[1241] ( 0: MIDI <Unknown>, 120 PPQN, 1 events)
[1241] 1: MONO16 ONESHOT, 32000 Hz, 64000 bytes (1.00 s)
[1241] 2: MONO16 ONESHOT, 24000 Hz, 144000 bytes (3.00 s)
[1241] 3: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 4: MONO16 ONESHOT, 16000 Hz, 12800 bytes (0.40 s)
[1241] 5: MONO16 ONESHOT, 16000 Hz, 22400 bytes (0.70 s)
[1241] 6: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 7: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 8: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 9: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 10: MONO16 ONESHOT, 24000 Hz, 192000 bytes (4.00 s)
[1241] 11: MONO16 ONESHOT, 32000 Hz, 48000 bytes (0.75 s)
[1241] 12: MONO16 ONESHOT, 32000 Hz, 48000 bytes (0.75 s)
[1241] 13: MONO16 ONESHOT, 32000 Hz, 48000 bytes (0.75 s)
[1241] 14: MONO16 ONESHOT, 24000 Hz, 48000 bytes (1.00 s)
[1241] 16: MONO16 ONESHOT, 33488 Hz, 66976 bytes (1.00 s)
[1241] 30: MONO16 ONESHOT, 33488 Hz, 66976 bytes (1.00 s)
[1241] 32: MONO16 LOOPED, 33488 Hz, 256 bytes (0.00 s)
[1241] 50: MONO16 ONESHOT, 32000 Hz, 64000 bytes (1.00 s)
[1241] 55: MONO16 ONESHOT, 32000 Hz, 64000 bytes (1.00 s)
[1241] 58: MONO16 ONESHOT, 8000 Hz, 16000 bytes (1.00 s)
[1241] 60: MONO16 ONESHOT, 32000 Hz, 16000 bytes (0.25 s)
[1241] 63: MONO16 ONESHOT, 32000 Hz, 32000 bytes (0.50 s)
[1241] 74: MONO16 LOOPED, 33488 Hz, 66976 bytes (1.00 s)
[1241] 84: MONO16 ONESHOT, 32000 Hz, 256000 bytes (4.00 s)
[1241] 86: MONO16 ONESHOT, 32000 Hz, 256000 bytes (4.00 s)
[1241] 87: MONO16 ONESHOT, 16000 Hz, 96000 bytes (3.00 s)
[1241] 102: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 103: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 104: MONO16 ONESHOT, 16000 Hz, 1600 bytes (0.05 s)
[1241] 105: MONO16 ONESHOT, 16000 Hz, 1600 bytes (0.05 s)
[1241] 106: MONO16 ONESHOT, 16000 Hz, 1600 bytes (0.05 s)
[1241] 107: MONO16 ONESHOT, 16000 Hz, 16000 bytes (0.50 s)
[1241] 108: MONO16 ONESHOT, 32000 Hz, 32000 bytes (0.50 s)
[1241] 109: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 110: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 111: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 112: MONO16 ONESHOT, 32000 Hz, 1600 bytes (0.03 s)
[1241] 113: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] 114: MONO16 ONESHOT, 32000 Hz, 32000 bytes (0.50 s)
[1241] 115: MONO16 ONESHOT, 32000 Hz, 3200 bytes (0.05 s)
[1241] 116: MONO16 ONESHOT, 32000 Hz, 12800 bytes (0.20 s)
[1241] 117: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 118: MONO16 ONESHOT, 16000 Hz, 32000 bytes (1.00 s)
[1241] 119: MONO16 ONESHOT, 16000 Hz, 25600 bytes (0.80 s)
[1241] 120: MONO16 ONESHOT, 16000 Hz, 11000 bytes (0.34 s)
[1241] 121: MONO16 ONESHOT, 32000 Hz, 6400 bytes (0.10 s)
[1241] (122: MIDI <Unknown>, 120 PPQN, 1 events)
[1241] 123: MONO16 ONESHOT, 48000 Hz, 48000 bytes (0.50 s)
[1241] 124: MONO16 ONESHOT, 48000 Hz, 96000 bytes (1.00 s)
[1242] 125: MONO16 ONESHOT, 32000 Hz, 64000 bytes (1.00 s)
[1242] 126: MONO16 ONESHOT, 32000 Hz, 96000 bytes (1.50 s)
[1242] 127: MONO16 ONESHOT, 32000 Hz, 32000 bytes (0.50 s)
[1242] Total 51 waveforms, total size: 2372184 bytes, total time: 36 s
[1881] No hiscore entries found!
Segmentation fault
[~]

Unlike other mapping software (gnome-maps, emerillon) it does not depend on geoclue/geoclue2 (or on kde packages like marble). The package was added to Arch’s official repos over a year ago. Their PKGBUILD builds fine.

would it be possible to make it use sudo instead?

From what I know, sudo is safer. Let me know if you agree this is a problem.

Description:

Hi guys. Could they add PeerTube to Hyperbola?

It’s on AUR.

Under the AGPLv3 license

Additional info:

I see that the PeerTube help configuration with an init.d