All Projects

ProjectCategoryTask TypePrioritySeverity  descSummaryStatusProgress
PackagesStableBug ReportVery LowMedium[arm-unknown-linux-gnueabi-gcc] not working; needs prop...Unconfirmed
0%
Task Description

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don't think "steps to reproduce" to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

PackagesAnyPrivacy IssueVery LowMedium[avahi] avahi publishes the hostname by defaultUnconfirmed
0%
Task Description

By default, the ‘disable-publishing’ parameter in the [publish] section of avahi-daemon.conf is set to ‘no’, which can be seen in my opinion as a privacy issue as avahi broadcasts the hostname without the user’s consent even though this has been explicitly disabled in the settings of networkmanager.

PackagesStableUpdate RequestVery LowMedium[cantarell-fonts] update package version to 0.111Unconfirmed
0%
Task Description

Prior version 0.0.25 and below are outdated.

Since version 0.100 and later, there are some changes being redesigned from scratch, added three new weights (including extra bold, light and thin) but not italic or oblique styles, AppStream metadata translations from contributors, and more.

See the version history releases for more details: https://gitlab.gnome.org/GNOME/cantarell-fonts/raw/master/NEWS

PackagesAnyImplementation RequestVery LowMedium[chdkptp] please add package to control Canon camerasUnconfirmed
0%
Task Description

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. chdkptp requires root privileges to connect to a camera.

PackagesAnySecurity IssueMediumMedium[cinepaint] unmaintained and unsupportableIn Progress
50%
Task Description

Remove “cinepaint” package since it’s unmaintained and unsupportable. Also, it doesn’t contains any file format support in the latest version (previous version supported multiple file formats).

I suggest use Krita (or Gimp 2.10) to edit 16bit and 32bit file formats or convert with imagemagick/graphicsmagick.

$ pacman -Si cinepaint
Repository      : community
Name            : cinepaint
Version         : 1:1.0.4-5
Description     : Sophisticated graphics manipulation programm supporting > 8bit pictures
Architecture    : x86_64
URL             : http://www.cinepaint.org
Licenses        : LGPL  GPL  MIT
Groups          : None
Provides        : None
Depends On      : gtk2  openexr  lcms  libxpm  fltk  ftgl  libxxf86vm
Optional Deps   : python2: for python plug-ins
                  gutenprint: for print plug-ins
                  ghostscript: for pdf plug-ins
Conflicts With  : None
Replaces        : None
Download Size   : 3.75 MiB
Installed Size  : 13.91 MiB
Packager        : Christian Hesse <arch@eworm.de>
Build Date      : Thu 28 Apr 2016 05:17:05 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature
PackagesAnyBug ReportVery LowMedium[clamtk] Gtk-WARNING **: Impossible to find the theme e...Assigned
0%
Task Description

Additional info:
* package version

Repositorio               : community
Nombre                    : clamtk
Versión                   : 5.24-1
Descripción               : Easy to use, light-weight, on-demand virus scanner for Linux
                            systems
Arquitectura              : any
URL                       : https://dave-theunsub.github.io/clamtk/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : clamav  perl  gtk2-perl  perl-locale-gettext  perl-libwww
                            perl-http-message  perl-lwp-protocol-https  perl-text-csv
                            perl-json  python  zenity  desktop-file-utils  gnome-icon-theme
                            cron
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 179,90 KiB
Tamaño de la instalación  : 1378,00 KiB
Encargado                 : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación         : sáb 19 nov 2016 20:25:20 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ clamtk
Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.

Steps to reproduce:

* Install clamtk in all version

PackagesAnyImplementation RequestVery HighMedium[coturn] add new packageUnconfirmed
0%
Task Description

Description:

  • add new package

Additional info:

Steps to reproduce:

  • none
PackagesStableBug ReportVery LowMedium[cowsay] perl-text-charwidth dependency missingUnconfirmed
0%
Task Description

cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency

Error message :

“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14.
BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”

After installing perl-text-charwidth, it works fine.

PackagesAnyBug ReportLowMedium[cryptsetup] can't umount luks filesystem on reboot/shu...Assigned
0%
Task Description

dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:

* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
Device foobar-pv is still in use                                              [ !! ]
PackagesAnyBug ReportLowMedium[cryptsetup] when dmcrypt start, the "/" filesystem, m...Assigned
0%
Task Description

When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:

* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...

These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password.
Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.

PackagesAnyUpdate RequestMediumMedium[cups] update requestAssigned
0%
Task Description

New versión v2.2.7

References:

PackagesTestingBug ReportMediumMedium[emacs] crush after swayResearching
0%
Task Description

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

PackagesAnyFeature RequestMediumMedium[epiphany] restore the hidden setting to disable JavaSc...Researching
0%
Task Description

Please restore the hidden setting (which can be enabled via dconf-editor) to disable JavaScript, which was removed last year (see here for details: https://github.com/GNOME/epiphany/blob/master/NEWS ).
Please do not remove the browser from the repos, as it renders this website correctly, unlike Mozlla based browsers (see here for more info: https://issues.hyperbola.info/index.php?do=details&task_id=131). The browser also provides other functions currently unavailable in Mozilla browsers, such as accessing LibreCMC router’s non-SSL web interface.

PackagesAnyImplementation RequestVery LowMedium[etherpad-lite] add packageUnconfirmed
0%
Task Description

Hi,

Would be nice to add etherpad-lite to our pacman.

https://github.com/ether/etherpad-lite

https://aur.archlinux.org/packages/etherpad-lite/

PackagesAnyBug ReportVery LowMedium[exfat-utils] filesystem can only be mounted manuallyUnconfirmed
0%
Task Description

One can mount exfat by running commands such as “sudo modprobe fuse” and “sudo mount.exfat /dev/sdc1 /mnt/storage” but it is inconvenient.

Also, loading fuse at startup is problematic - see here:

https://issues.hyperbola.info/index.php?do=details&task_id=1433

PackagesStableBug ReportVery LowMedium[fail2ban] remove systemd integrationUnconfirmed
0%
Task Description

Description:
This package has a strong systemd integration. It has a systemd backend to get files modifications:

(from /etc/fail2ban/jail.conf)

# systemd:   uses systemd python library to access the systemd journal.
#              Specifying "logpath" is not valid for this backend.
#              See "journalmatch" in the jails associated filter config

and many files at /etc/fail2ban/filter.d have systemd stuff

[/etc/fail2ban/filter.d] [0]
$ grep -i systemd *
dovecot.conf:#journalmatch = _SYSTEMD_UNIT=dovecot.service
ejabberd-auth.conf:# Notes.:  systemd journalctl style match filter for journal based backend
postfix.conf:journalmatch = _SYSTEMD_UNIT=postfix.service
postfix-sasl.conf:#journalmatch = _SYSTEMD_UNIT=postfix.service
pure-ftpd.conf:journalmatch = _SYSTEMD_UNIT=pure-ftpd.service + _COMM=pure-ftpd
recidive.conf:journalmatch = _SYSTEMD_UNIT=fail2ban.service PRIORITY=5
sshd.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
sshd-ddos.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd

Additional info:
* fail2ban-0.9.6-2.hyperbola3

PackagesStableBug ReportVery LowMedium[fail2ban] uses old /usr/bin/sendmail location when it ...Unconfirmed
0%
Task Description

Description:

I saw errors in logs because fail2ban couldn’t find /usr/bin/sendmail, and discovered this:

[/etc/fail2ban] [0]
$ grep /usr/bin/sendmail */*
action.d/sendmail-buffered.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                 Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-geoip-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipjailmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-matches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>

Please, also check for other binaries with wrong locations

As of now, the solution is as simple as removing this line → https://git.hyperbola.info:50100/packages/community.git/tree/fail2ban/PKGBUILD#n79

Additional info:
* fail2ban-0.9.6-2.hyperbola3

PackagesAnyBug ReportVery LowMedium[ffmpegthumbnailer] missing support for some media form...Unconfirmed
0%
Task Description

ffmpegthumbnailer does not support some media formats since they do not appear in its configuration file ffmpegthumbnailer.thumbnailer which can be found in /usr/share/thumbnailers/. By editing the file ffmpegthumbnailer.thumbnailer one can add thumbnail support for embedded art in audio formats such as flac and mp3 (using the -m flag) and thumbnail support for webp (a new image format which iceweasel-uxp and gthumb support). I’m attaching my edited file (I just added a few common audio formats and webp and added the -m flag and removed the -f flag).

PackagesAnyImplementation RequestVery LowMedium[foxtrotgps] please add package to reposUnconfirmed
0%
Task Description

Unlike other mapping software (gnome-maps, emerillon) it does not depend on geoclue/geoclue2 (or on kde packages like marble). The package was added to Arch’s official repos over a year ago. Their PKGBUILD builds fine.

PackagesStableImplementation RequestVery LowMedium[gcc] Renew to version 8 or 9, including multilibDeferred
0%
Task Description

As even the support for GCC 7 is now ending with the release of version 7.5 (https://gcc.gnu.org/ml/gcc/2019-11/msg00099.html) I’d like to propose a renewal of the building-stack - which I think is also needed in time. Also a renewal of the glibc would be good at all!

PackagesStableSecurity IssueVery LowMedium[git] Multiple CVEsUnconfirmed
0%
Task Description

CVE-2020-5260 has been fixed very recently in Debian, so I thought I would apply this patch. However, I found out that security patches have not been applied for quite a while (I could account for at least 6 CVEs).

Considering that the version in Debian stretch (2.11.0) is the nearest version with security patches released by Debian and that git project oldest supported version is 2.17, I have used patches from Debian stretch to apply on 2.12.2 currently in Milky Way.

But I have the following error on check():

 |  *** prove ***
 |
 |  Test Summary Report
 |  -------------------
 |  t5570-git-daemon.sh                              (Wstat: 256 Tests: 20 Failed: 10)
 |    Failed tests:  3-7, 15-19
 |    Non-zero exit status: 1
 |  t5811-proto-disable-git.sh                       (Wstat: 256 Tests: 26 Failed: 16)
 |    Failed tests:  2-6, 9-11, 15-19, 21-23
 |    Non-zero exit status: 1
 |  Files=769, Tests=14137, 1101 wallclock secs ( 8.08 usr  1.12 sys + 144.48 cusr 63.42 csys = 217.10 CPU)
 |  Result: FAIL
 |  make[1]: *** [Makefile:45: prove] Error 1
 |  make[1]: Leaving directory '/build/git/src/git-2.12.2/t'
 |  make: *** [Makefile:2291: test] Error 2
 |  ==> ERROR: A failure occurred in check().
 |      Aborting...

This does not seem to be related to my change as the current version in Milky Way produces the same error (IOW the package currently in Milky Way is not rebuidable).

PackagesAnyImplementation RequestVery LowMedium[gitea] self-hosted git service Assigned
0%
Task Description

Description:

A nice Git service would be welcomed in our pacman.

- https://github.com/go-gitea/gitea

- https://www.archlinux.org/packages/community/x86_64/gitea/

PackagesAnyDrop RequestMediumMedium[gksu] is replaced and has to be deleted from our pacma...Researching
0%
Task Description

Description:
From the author’s webpage gksu has been replaced.

Additional info:
* package version(s) : extra/gksu 2.0.2-5

http://www.nongnu.org/gksu/

PackagesAnyDrop RequestVery LowMedium[hardening-wrapper] deprecated, not needed anymoreUnconfirmed
0%
Task Description

According to : https://github.com/thestinger/hardening-wrapper-deprecated

Wrapper scripts for building hardened executables by default (deprecated, replaced by standard Arch Linux toolchain changes)

PackagesAnyImplementation RequestVery LowMedium[i3-gaps] Add new packageUnconfirmed
0%
Task Description

Description: i3-gaps is a fork of i3 that properly implements gaps.

Additional info:
It is implemented in the AUR https://www.archlinux.org/packages/community/x86_64/i3-gaps/ and it’s source is available on github: https://github.com/Airblader/i3

PackagesStableBug ReportVery LowMedium[kodi-addons-visualization] addons don't workUnconfirmed
0%
Task Description

After installation, none of the addons is present in Kodi!

PackagesStableBug ReportMediumMedium[libusb] error when mounting USB memories on virtual ma...Researching
0%
Task Description

## Bug ##

libusb: error [_get_usbfs_fd] libusb couldn’t open USB device /dev/bus/usb/003/003: permission denied libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.

Reference links: https://askubuntu.com/questions/526962/libusb-couldnt-open-usb-device-dev-bus-usb-002-006-permission-denied-libusb

PackagesStableBug ReportMediumMedium[linux-libre-lts] [i915] Display freeze : hpd interrupt...Deferred
0%
Task Description

Hello,

I recently acquired a T400 Thinkpad with 1440×900 panel.
On this T400, I installed Hyperbola, just like on my x200 Thinkpad with 1280×800 panel.

Both Thinkpad are running the same Hyperbola installation :

Full disk encryption (with Libreboot) so both Thinkpad are using early KMS (MODULES=”i915” in /etc/mkinitcpio.conf)
Same kernel : linux-libre-lts (4.9.99 at the moment I’m writing this message)
video driver : modesetting
DE : xfce4 with xfwm4

On the Thinkpad x200, everything works great, no issue to report.

On the T400 though, the linux-libre-lts kernel, I’m getting random display freezes, when it happens, this message appears in dmesg :

hpd interrupt storm detected on connector hdmi-a-1

And the display (and sound) freezes for 10 seconds (sometimes more !)

As Hyperbola proposes linux-libre-lts kernel only, I installed latest linux-libre-lts (4.14.40) and linux-libre (4.16.8) from Parabola GNU/Linux repo.

Results :

With 4.14.40 : Same issue as with 4.9.99 kernel from Hyperbola repo.
With 4.16.8 : Issue is not present ! No more freeze !

I’m not sure how to proceed though. Would you be kind enough helping me to find which commit in i915 driver improved the situation ? If we find it, maybe it could be added as a patch to 4.9.x kernel series.
Or maybe it is something else.. I don’t have much experience, I can provide logs if needed.

Thanks for your help

PackagesAnyUpdate RequestVery LowMedium[lmms] update package version to 1.2.0Unconfirmed
0%
Task Description

In the latest version, it has many more changes with new and improvement features, and fixes function issues since released as preview stage in every eight times per three years ago[1]. And also it is possible to rebuild package with sndio.

[1]: https://github.com/LMMS/lmms/releases/ (see all sections below from 1.2.0-RC1 to 1.2.0 in the version history releases)

PackagesAnyBug ReportMediumMedium[lxmusic]package needs rebuilding as it fails to runIn Progress
0%
Task Description

Rebuilt version (using PKGBUILD from Arch) works fine. Same is true for lxmusic-gtk3 (which the PKGBUILD also builds).

https://git.archlinux.org/svntogit/community.git/tree/trunk?h=packages/lxmusic

PackagesAnyBug ReportVery LowMedium[mate-panel] country flags for keyboard layouts are mis...Unconfirmed
0%
Task Description

After enabling show-flags via dconf-editor in org.mate.peripherals-keyboard-xkb.indicator the flags don’t show up. The simple workaround is to copy flags you want into ~/.icons/flags (after creating the directory) from here

https://github.com/linuxmint/flags/tree/master/usr/share/iso-flag-png

and then to reboot.

It seems to be this bug:

https://askubuntu.com/questions/1059324/how-to-show-current-keyboard-layout-on-mate-panel-as-country-flag/1059325#1059325

PackagesAnyImplementation RequestVery HighMedium[mediagoblin] add GNU MediaGoblin packageUnconfirmed
0%
Task Description

Description:

  • add GNU MediaGoblin package

Additional info:

  • none

Steps to reproduce:

  • none
PackagesAnyImplementation RequestVery LowMedium[midori] please re-add new releasesUnconfirmed
0%
Task Description

The security issues regarding the package which led to the package’s removal from Hyperbola (old WebKit and Vala dependency) have apparently been resolved in recent releases, see the new comment in this bug report and the latest PKGBUILD in Arch’s repo.

https://launchpad.net/bugs/1698483

https://www.archlinux.org/packages/community/x86_64/midori/

PackagesAnyFeature RequestVery LowMedium[minidlna] remove systemd file and add openrc supportUnconfirmed
0%
Task Description

Description:

minidlna lacks openrc support and includes a systemd file

Additional info: none

Steps to reproduce:

$ sudo pacman -S minidlna
$ cat /usr/lib/systemd/system/minidlna.service

PackagesAnyFreedom IssueVery LowMedium[mongodb] needs OpenRC init scriptUnconfirmed
0%
Task Description

Description:
needs OpenRC init script

Additional info:
* mongodb-3.4.3-1

PackagesAnyImplementation RequestMediumMedium[ncdu] add new packageDeferred
0%
Task Description

PKGBUILD

# $Id: PKGBUILD 187611 2016-08-26 15:44:01Z bisson $
# Contributor: lp76 <l.peduto@gmail.com>
# Contributor: Daenyth <Daenyth+Arch AT gmail DOT com>
# Maintainer: Gaetan Bisson <bisson@archlinux.org>

pkgname=ncdu
pkgver=1.12
pkgrel=1.hyperbola1
pkgdesc='Disk usage analyzer with an ncurses interface'
url='https://dev.yorhel.nl/ncdu'
license=('custom:MIT')
depends=('ncurses')
arch=('i686' 'x86_64')
validpgpkeys=('74460D32B80810EBA9AFA2E962394C698C2739FA')
source=("https://dev.yorhel.nl/download/${pkgname}-${pkgver}.tar.gz"{,.asc})
sha512sums=('20620dd79d2af878442769e097f13806f64f23875dcb85ebccd573a3de43aba5663d496049b64015d13f9a79d624298032c008ef61dfb6f61d8b12902b8dca12'
            'SKIP')

build() {
    cd "${srcdir}/${pkgname}-${pkgver}"
    ./configure --prefix=/usr
    make
}

package() {
    cd "${srcdir}/${pkgname}-${pkgver}"
    make DESTDIR="${pkgdir}" install
    install -Dm644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}
PackagesStableBug ReportVery LowMedium[nfs-utils] missing idmapd.confUnconfirmed
0%
Task Description

Hello,

When mounting an NFS share, I get a warning about missing idmpad.conf

rpc.idmapd: Skipping configuration file "/etc/idmapd.conf": No such file or directory
4341: * Stopping idmapd ...

Debian includes a default config file for idmap :

[General]

Verbosity = 0
Pipefs-Directory = /run/rpc_pipefs
# set your own domain here, if id differs from FQDN minus hostname
# Domain = localdomain

[Mapping]

Nobody-User = nobody
Nobody-Group = nogroup
PackagesAnyImplementation RequestVery LowMedium[nnn] package requestUnconfirmed
0%
Task Description

This is a request to package nnn - a full-featured terminal file manager for low-end devices and the regular desktop.

nnn is available on Debian, Ubuntu (and family), Fedora, OpenSUSE and Arch Linux.

Homepage: https://github.com/jarun/nnn License: BSD 2-Clause

I would highly appreciate if nnn can be added to the repository.

PackagesAnyBug ReportVery LowMedium[openrc] cannot load fuse at bootUnconfirmed
0%
Task Description

I added
<quote>modules=”fs-fuse”</quote>
to /etc/conf.d/modules (and also “fuse” instead).

I looked in /var/log/rc.log and I see this line

<quote>modprobe: FATAL: Module fs-fusetun not found in directory /lib/modules/4.9.194-gnu-1-lts</quote>

It looks like modprobe added “tun” to the filename which prevents loading the module.

PackagesAnySecurity IssueMediumMedium[openssh] CVE-2018-15919Researching
0%
Task Description

Remotely observable behavior in auth-gss2.c in OpenSSH through 7.8 could be used by remote attackers to detect existence of users on a target system when GSS2 is in use. NOTE: the discoverer states ‘We understand that the OpenSSH developers do not want to treat such a username enumeration (or “oracle”) as a vulnerability.’ https://security-tracker.debian.org/tracker/CVE-2018-15919

PackagesAnySecurity IssueVery LowMedium[patch] CVE-2018-6951 - NULL pointer DoSAssigned
0%
Task Description

An issue was discovered in GNU patch through 2.7.6. There is a segmentation fault, associated with a NULL pointer dereference, leading to a denial of service in the intuit_diff_type function in pch.c, aka a “mangled rename” issue.

https://security-tracker.debian.org/tracker/CVE-2018-6951

PackagesAnyImplementation RequestVery LowMedium[peertube] Add new PackageUnconfirmed
0%
Task Description

Description:

Hi guys. Could they add PeerTube to Hyperbola?

It’s on AUR.

Under the AGPLv3 license

Additional info:

I see that the PeerTube help configuration with an init.d

PackagesStableBug ReportVery LowMedium[postgrey] has systemd service and no OpenRC init scrip...Unconfirmed
0%
Task Description

Description:
The title says everything

Also, it doesn’t follow the FHS (/usr/bin/postgrey should be in /usr/sbin)

Additional info:
* postgrey-1.37-1

PackagesAnyImplementation RequestVery LowMedium[purple-matrix] Please add packageUnconfirmed
0%
Task Description

Package is a libpurple plugin for the Matrix protocol which is consistent with Hyperbola’s social contract as Matrix is a federated protocol.

Source code can be found here licensed under GPLv2:

https://github.com/matrix-org/purple-matrix

PKGBUILD for git version is available here (last stable release is from two years ago so git version is probably the best version to use):

https://aur.archlinux.org/packages/purple-matrix-git/

PackagesAnyFeature RequestMediumMedium[pybitmessage] Package RequestUnconfirmed
0%
Task Description

PyBitmessage is a secure p2p e-mail alternative. It could be useful to package it.

https://github.com/Bitmessage/PyBitmessage/releases https://aur.archlinux.org/packages/pybitmessage/ https://aur.archlinux.org/packages/pybitmessage-git/ (contains a firejail profile)

PackagesAnySecurity IssueVery LowMedium[qemu] Multiple CVEUnconfirmed
0%
Task Description

CVE-2018-20123 QEMU: pvrdma: memory leakage in device hotplug
https://www.openwall.com/lists/oss-security/2018/12/13/4

CVE-2018-16872 Qemu: usb-mtp: path traversal by host filesystem
manipulation in Media Transfer Protocol (MTP)
https://www.openwall.com/lists/oss-security/2018/12/13/11

Patches included at above URLs.

PackagesAnyBug ReportMediumMedium[rxvt-unicode] rc-status command print "bug" tableResearching
0%
Task Description

If you do a command line rc-status on urxvt terminal, the name of the column of services are hidden. You will only see the status columns. Example:

Runlevel: default
  started  ]
  started  ]
  started  ]
  started  ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
  started 00:36:20 (0) ]
Dynamic Runlevel: hotplugged
Dynamic Runlevel: needed/wanted
  started  ]
  started  ]
  started  ]d
Dynamic Runlevel: manual
PackagesAnyImplementation RequestMediumMedium[searx] add new packageDeferred
0%
Task Description

Hi André, you could make an init for the searx search engine, it happens that
I want to launch it from local to avoid being in searx.me or
searx.riseup.net.

I have seen that there is a PKGBUILD in AUR [0]. I think it is necessary to make one with the init Openrc

[0]: https://aur.archlinux.org/packages/searx-py3/

PackagesAnyFeature RequestVery LowMedium[slim-themes] please add hyperbola branded variantUnconfirmed
0%
Task Description

slim-themes seems to be considered free according to Parabola - they have an issue with arch branding (slim-themes::::[branding][FIXME:package] has “archlinux” theme) which they resolve be creating the package parabola-themes-slim. Perhaps this can be the basis for hyperbola branded themes.

https://git.parabola.nu/blacklist.git/plain/blacklist.txt https://www.parabola.nu/packages/libre/x86_64/parabola-themes-slim/

PackagesAnyBug ReportVery LowMedium[slim] login screen not displaying correctlyAssigned
0%
Task Description

It worked fine on the previous version of Hyperbola. The word user/username does not show up. A workaround is to wait 10 seconds and enter the username and click enter - then it will switch correctly to the password screen (otherwise you need to enter the username and password at least twice in order to successfully login).

Showing tasks 101 - 150 of 484 Page 3 of 10 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing