All Projects

ProjectCategoryTask Type  ascPrioritySeveritySummaryStatusProgress
PackagesAnyBug ReportVery LowLow[gimp] [gegl] Module '/usr/lib/gegl-0.3/lens-correct.so...Assigned
0%
Task Description

admin→ gimp IMG_20170909_153350828.jpg
GEGL-Message: Module ‘/usr/lib/gegl-0.3/lens-correct.so’ load error: liblensfun.so.1: cannot open shared object file: No such file or directory
GEGL-Message: Module ‘/usr/lib/gegl-0.3/matting-levin.so’ load error: libumfpack.so.5: cannot open shared object file: No such file or directory

(gimp:12519): GLib-GObject-WARNING **: g_object_set_valist: object class ‘GeglConfig’ has no property named ‘cache-size’

Those are errors I get when running Gimp.

PackagesAnyBug ReportVery LowMedium[ffmpegthumbnailer] missing support for some media form...Unconfirmed
0%
Task Description

ffmpegthumbnailer does not support some media formats since they do not appear in its configuration file ffmpegthumbnailer.thumbnailer which can be found in /usr/share/thumbnailers/. By editing the file ffmpegthumbnailer.thumbnailer one can add thumbnail support for embedded art in audio formats such as flac and mp3 (using the -m flag) and thumbnail support for webp (a new image format which iceweasel-uxp and gthumb support). I’m attaching my edited file (I just added a few common audio formats and webp and added the -m flag and removed the -f flag).

PackagesStableBug ReportVery LowMedium[fail2ban] uses old /usr/bin/sendmail location when it ...Unconfirmed
0%
Task Description

Description:

I saw errors in logs because fail2ban couldn’t find /usr/bin/sendmail, and discovered this:

[/etc/fail2ban] [0]
$ grep /usr/bin/sendmail */*
action.d/sendmail-buffered.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                 Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-geoip-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipjailmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-matches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>

Please, also check for other binaries with wrong locations

As of now, the solution is as simple as removing this line → https://git.hyperbola.info:50100/packages/community.git/tree/fail2ban/PKGBUILD#n79

Additional info:
* fail2ban-0.9.6-2.hyperbola3

PackagesStableBug ReportVery LowVery Low[fail2ban] update dovecot failregex to support verbose ...Unconfirmed
0%
Task Description

Description:
The /etc/fail2ban/filter.d/dovecot.conf file has a failregex with the following:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user\s*$

and works with things like:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user

but with verbosity enabled in Dovecot, this output looks like this:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user (given password: password)

and in this case it doesn’t work, but it does if we fix the failregex if we replace it with:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user( \(given password: \S*\))?\s*$

with this new expression, it works with and without verbosity

And regarding postfix, to make it work correctly I “backported” some pieces from newest failregex:

/etc/fail2ban/postfixr-rbl.conf:

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: [45]54 [45]\.7\.1 Service unavailable; Client host \[\S+\] blocked using .* from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

/etc/fail2ban/postfix.conf: (second failregex)

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: 45[04] 4\.7\.1 Client host rejected: cannot find your (reverse )?hostname, (\[\S*\]); from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

I can create a patch if you want. Note that I haven’t tested all filters, some others may also need some rework

Additional info:
* fail2ban-0.9.6-2.hyperbola3

PackagesStableBug ReportVery LowMedium[fail2ban] remove systemd integrationUnconfirmed
0%
Task Description

Description:
This package has a strong systemd integration. It has a systemd backend to get files modifications:

(from /etc/fail2ban/jail.conf)

# systemd:   uses systemd python library to access the systemd journal.
#              Specifying "logpath" is not valid for this backend.
#              See "journalmatch" in the jails associated filter config

and many files at /etc/fail2ban/filter.d have systemd stuff

[/etc/fail2ban/filter.d] [0]
$ grep -i systemd *
dovecot.conf:#journalmatch = _SYSTEMD_UNIT=dovecot.service
ejabberd-auth.conf:# Notes.:  systemd journalctl style match filter for journal based backend
postfix.conf:journalmatch = _SYSTEMD_UNIT=postfix.service
postfix-sasl.conf:#journalmatch = _SYSTEMD_UNIT=postfix.service
pure-ftpd.conf:journalmatch = _SYSTEMD_UNIT=pure-ftpd.service + _COMM=pure-ftpd
recidive.conf:journalmatch = _SYSTEMD_UNIT=fail2ban.service PRIORITY=5
sshd.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
sshd-ddos.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd

Additional info:
* fail2ban-0.9.6-2.hyperbola3

PackagesAnyBug ReportVery LowMedium[exfat-utils] filesystem can only be mounted manuallyUnconfirmed
0%
Task Description

One can mount exfat by running commands such as “sudo modprobe fuse” and “sudo mount.exfat /dev/sdc1 /mnt/storage” but it is inconvenient.

Also, loading fuse at startup is problematic - see here:

https://issues.hyperbola.info/index.php?do=details&task_id=1433

PackagesAnyBug ReportLowLow[erlang-nox] uses "nox" suffixIn Progress
0%
Task Description

Description:

  • Fix package name to erlang-headless that is the correct name for packages without graphical user interface support. nox suffix is incorrect because Hyperbola supports Wayland too, not only X.Org.

Additional info:
* package version(s)

  • 19.3-3

* config and/or log files etc.

Steps to reproduce:

  • None
PackagesTestingBug ReportMediumMedium[emacs] crush after swayResearching
0%
Task Description

I have installed Hyperbola on two laptops. And I have noticed that after running sway and exiting out of sway, GNU emacs crushers on console. It is easy to repeat it:

1. Run sway
2. Exit sway or killall sway
3. Try running emacs on console, there will be crush
4. log out, log in, and emacs will work on console again

Yet it should not crush.

PackagesStableBug ReportVery LowLow[dhcpcd-ui] Adding icons from "Network-Manager Applet"Unconfirmed
0%
Task Description

When using the package for wireless connections no further icon is displayed without having the package [b]network-manager-applet[/b] installed.

PackagesStableBug ReportVery LowHigh[devede] xorriso unsupported option '-dvd-video'Assigned
0%
Task Description

Description:

Devede fails to convert transcoded videos to iso format with libburn-1.5.0.

Drive current: -outdev 'stdio:/home/heckyel/movie/movie.iso'
Media current: stdio file, overwriteable
Media status : is blank
Media summary: 0 sessions, 0 data blocks, 0 data,  334g free
xorriso : FAILURE : -as genisofs: Unsupported option '-dvd-video'
xorriso : NOTE : -return_with SORRY 32 triggered by problem severity FAI

Additional info:

$ pacman -Si devede
Repositorio               : community
Nombre                    : devede
Versión                   : 4.8.8-1
Descripción               : A program to create VideoDVDs and CDs
Arquitectura              : any
URL                       : http://www.rastersoft.com/programas/devede.html
Licencias                 : GPL3
Grupos                    : Nada
Provee                    : Nada
Depende de                : mencoder  ffmpeg  dvdauthor  vcdimager  cdrkit  ttf-dejavu
                            gtk3  python-cairo  python-gobject  python-setuptools
Dependencias opcionales   : mplayer
                            vlc
                            mpv
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1640,88 KiB
Tamaño de la instalación  : 3331,00 KiB
Encargado                 : Sergej Pupykin <pupykin.s+arch@gmail.com>
Fecha de creación         : vie 10 feb 2017 05:06:37 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

Link’s code:

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/mkisofs.py#L61

- https://gitlab.com/rastersoft/devedeng/blob/master/src/devedeng/genisoimage.py#L61

Steps to reproduce:

- Install devede
- Create video DVD disc

PackagesAnyBug ReportLowLow[crystal] error build InvidiousResearching
0%
Task Description

Description:

crystal build src/invidious.cr –release

Error in src/invidious.cr:19: while requiring "kemal"

require "kemal"
^

in lib/kemal/src/kemal.cr:4: while requiring "./kemal/*"

require "./kemal/*"
^

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^~~~~~~~

in lib/kemal/src/kemal/config.cr:26: expanding macro

    property static_headers : (HTTP::Server::Response, String, File::Info -> Void)?
    ^

in macro 'property' expanded macro: macro_48177600:567, line 4:

   1.       
   2.         
   3.           
>  4.             @static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   5. 
   6.             def static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil
   7.               @static_headers
   8.             end
   9. 
  10.             def static_headers=(@static_headers : (HTTP::Server::Response, String, File::Info -> Void) | ::Nil)
  11.             end
  12.           
  13.         
  14.       
  15.     

undefined constant File::Info

Additional info:
* package version(s)

Crystal 0.22.0 (2017-04-22) LLVM 4.0.0

Steps to reproduce:

PackagesAnyBug ReportLowMedium[cryptsetup] when dmcrypt start, the "/" filesystem, m...Assigned
0%
Task Description

When dmcrypt service start, the “/” filesystem is remounted, mtab is updated and bootmisc is recording the login users, by waiting time scheduling:

* root: waiting for dmcrypt (50 seconds)
* root: timed out waiting for dmcrypt
* Remounting root filesystem read/write ...
* Remounting filesystems ...
* mtab: waiting for dmcrypt (50 seconds)
* mtab: timed out waiting for dmcrypt
* Updating /etc/mtab ...
* Creating mtab symbolic link
* bootmisc: waiting to dmcrypt (50 seconds)
* bootmisc: timed out waiting for dmcrypt
* Creating user login records ...

These features on dmcrypt service are useless and these lines print above filesystem passphrase order (the printed line), those ones break printed console and print the pressed keyboard digit when I’m setting up password.
Sometimes this breaks services startup, and I need press “enter” consecutively to allow run the services.

PackagesAnyBug ReportLowMedium[cryptsetup] can't umount luks filesystem on reboot/shu...Assigned
0%
Task Description

dmcrypt service can’t umount luks filesystem on reboot/shutdown, device or resource busy:

* Removing dm-crypt mappings
* foobar-pv
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
device-mapper: remove ioctl on foobar-pv  failed: Device or resource busy
Device foobar-pv is still in use                                              [ !! ]
PackagesStableBug ReportVery LowMedium[cowsay] perl-text-charwidth dependency missingUnconfirmed
0%
Task Description

cowsay (cowsay-3.03-9.hyperbola1) is missing perl-text-charwidth dependency

Error message :

“Can’t locate Text/CharWidth.pm in @INC (you may need to install the Text::CharWidth module) (@INC contains: /usr/lib/perl5/site_perl /usr/share/perl5/site_perl /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl .) at /usr/bin/cowsay line 14.
BEGIN failed–compilation aborted at /usr/bin/cowsay line 14.”

After installing perl-text-charwidth, it works fine.

PackagesAnyBug ReportVery LowMedium[clamtk] Gtk-WARNING **: Impossible to find the theme e...Assigned
0%
Task Description

Additional info:
* package version

Repositorio               : community
Nombre                    : clamtk
Versión                   : 5.24-1
Descripción               : Easy to use, light-weight, on-demand virus scanner for Linux
                            systems
Arquitectura              : any
URL                       : https://dave-theunsub.github.io/clamtk/
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : clamav  perl  gtk2-perl  perl-locale-gettext  perl-libwww
                            perl-http-message  perl-lwp-protocol-https  perl-text-csv
                            perl-json  python  zenity  desktop-file-utils  gnome-icon-theme
                            cron
Dependencias opcionales   : Nada
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 179,90 KiB
Tamaño de la instalación  : 1378,00 KiB
Encargado                 : Levente Polyak <anthraxx@archlinux.org>
Fecha de creación         : sáb 19 nov 2016 20:25:20 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

$ clamtk
Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «clearlooks», at /usr/lib/perl5/vendor_perl/ClamTk/GUI.pm line 35.

Steps to reproduce:

* Install clamtk in all version

Software Developmentchroot-nspawnBug ReportMediumMedium[chroot-nspawn] Create mount points if mountpoint exit ...Unconfirmed
0%
Task Description

The actual behavior is to create mount points if mountpoint exits with exit status 1, however it may also exit with code 32 and thus creating a real mess:

$ sudo chroot-nspawn
Spawning container megver83 on /var/lib/archbuild/chroot1/megver83
Press ^] three times within 1s to kill container.
mount: /sys/fs/cgroup: mount point does not exist.
mkdir: cannot create directory '/sys/fs/cgroup/blkio': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/cpu': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/cpuacct': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/cpu,cpuacct': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/cpuset': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/devices': No such file or directory  
mkdir: cannot create directory '/sys/fs/cgroup/freezer': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/memory': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/net_cls': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/net_cls,net_prio': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/net_prio': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/pids': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/systemd': No such file or directory
mount: /sys/fs/cgroup/blkio: mount point does not exist.
mount: /sys/fs/cgroup/cpuset: mount point does not exist.
mount: /sys/fs/cgroup/devices: mount point does not exist.
mount: /sys/fs/cgroup/freezer: mount point does not exist.
mount: /sys/fs/cgroup/memory: mount point does not exist.
mount: /sys/fs/cgroup/pids: mount point does not exist.

So I created a patch to fix this.

P.S.: although I can git clone the repo with ssh access, whenever I do a push I get:

error: remote unpack failed: unable to create temporary object directory
To ssh://git.hyperbola.info:51100/~git/software/chroot-nspawn.git
 ! [remote rejected] master -> master (unpacker error)
error: failed to push some refs to 'ssh://git.hyperbola.info:51100/~git/software/chroot-nspawn.git'

Do I have the permission to write in this repo? If not, I’d like it, as I’m planning to improve this great script

PackagesAnyBug ReportVery LowHigh[blueman] org.freedesktop.DBus.Error.NameHasNoOwnerUnconfirmed
0%
Task Description

Description:

org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name ‘org.bluez.obex’: no such name

Additional info:
* package version(s)

$ pacman -Si blueman
Repositorio               : community
Nombre                    : blueman
Versión                   : 2.0.4-3
Descripción               : GTK+ Bluetooth Manager
Arquitectura              : x86_64
URL                       : https://github.com/blueman-project/blueman
Licencias                 : GPL
Grupos                    : Nada
Provee                    : Nada
Depende de                : bluez  bluez-libs  gtk3  libnotify  python-cairo  python-dbus
                            python-gobject
Dependencias opcionales   : dnsmasq: Network Access Point (NAP) support
                            networkmanager: Dial Up Networking (DUN) and Personal Area
                            Networking (PAN) support
                            pulseaudio-bluetooth: audio devices support
En conflicto con          : Nada
Remplaza a                : Nada
Tamaño de la descarga     : 1814,18 KiB
Tamaño de la instalación  : 5345,00 KiB
Encargado                 : Felix Yan <felixonmars@archlinux.org>
Fecha de creación         : dom 25 dic 2016 12:00:42 -05
Validado por              : Suma MD5  Suma SHA-256  Firma

* config and/or log files etc.

(blueman-applet | ccze -A):
- https://paste.debian.net/plain/1049476

(pkgfile -l blueman):
- https://paste.debian.net/plain/1049477

Steps to reproduce:

- Install blueman

PackagesStableBug ReportVery LowLow[autofs]: default configuration is /etc/auto.master ins...Unconfirmed
0%
Task Description

Description:

default configuration is /etc/auto.master instead of /etc/autofs/auto.master

admin→ sudo /usr/bin/automount -v -f -p /run/autofs.pid
Starting automounter version 5.1.2, master map /etc/auto.master
using kernel protocol version 5.02
lookup(file): file map /etc/auto.master missing or not readable
no mounts in table

PackagesAnyBug ReportMediumCritical[ath9k-htc-firmware]: not workRequires Testing
50%
Task Description

Description:

Ath9k wifi device not working, possibly bad compilation or issues with gcc

Additional info:
* package version(s)

- gcc-8.4.0-2
- ath9k-htc-firmware-1.4.0-8

* config and/or log files etc.

[    8.302952] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[    8.303011] usbcore: registered new interface driver ath9k_htc
[    8.303067] usb 1-1: Direct firmware load for ath9k_htc/htc_9271-1.4.0.fw failed with error -2
[    8.303073] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[    8.623141] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51008
[    9.683657] ath9k_htc 1-1:1.0: ath9k_htc: Target is unresponsive
[    9.683672] ath9k_htc: Failed to initialize the device

Steps to reproduce:

- Add wifi device with ath9k firmware, for example: TL-WN722N
- pacman -S ath9k-htc-firmware

PackagesStableBug ReportVery LowMedium[arm-unknown-linux-gnueabi-gcc] not working; needs prop...Unconfirmed
0%
Task Description

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don't think "steps to reproduce" to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

PackagesAnyBug ReportVery LowLow[Hyperbola GNU/Linux-libre 0.4] Testing Lumina - lumina...Done
100%
Task Description

So far lumina-mediaplayer is working, but lumina-screenshot has a problem to load as application. The library libQt5X11Extras.so.5 is missing when looking at the dependencies.

PackagesTestingBug ReportHighCritical[Hyperbola GNU/Linux-libre 0.4] Problems with sndio fai...Requires Testing
90%
Task Description

There are issues with the current sndio-package as it seems not possible to get this to work with ALSA.

PackagesTestingBug ReportVery LowCritical[Hyperbola GNU/Linux-libre 0.4] Installation issue for ...Unconfirmed
0%
Task Description

Description: Problem with execution of “pacstrap /mnt base base-devel syslinux” from 0.3.1-chroot ISO-image with modified pacman.conf and mirrorlist for testing. There are errors for the packages “libxcrypt” and “man-pages” as both have “/usr/share/man/man3/crypt.3.gz” and “/usr”share/man/man3/crypt_r.3.gz” included.

PackagesTestingBug ReportVery LowCritical[Hyperbola GNU/Linux-libre 0.4] Installation for syslin...Unconfirmed
0%
Task Description

Description: Configuration file “syslinux.cfg” under /boot/syslinux/ has to be adjusted. Problem with kernel-images loaded and the concurrent booting device is per default configured to /dev/sda3. Kernel-images are named as “linux-libre” not “linux-libre-lts”.

ServicesFlyspray IssueBug ReportVery LowMedium[Flyspray] long tags break the backendUnconfirmed
0%
Task Description

When I was adding this task, I put some long tags on it (html form allowed that) and got an error concerning too long tags field to fit in an sql datatype (max is 40 chars). Task got added anyway (just without tags). I didn’t know that and created it again.

PackagesAnyBug ReportVery LowMedium[ rtkit ] contains systemd unit filesUnconfirmed
0%
Task Description

Description:

The Arch version of tinc from the snapshot used by Hyperbola comes with systemd support. Since Hyperbola follows the Init Freedom Campaign , systemd unit files removal is required or add OpenRC init scripts to replace it.

Additional info:

pacman -Ql rtkit
rtkit /etc/
rtkit /etc/dbus-1/
rtkit /etc/dbus-1/system.d/
rtkit /etc/dbus-1/system.d/org.freedesktop.RealtimeKit1.conf
rtkit /usr/
rtkit /usr/bin/
rtkit /usr/bin/rtkitctl
rtkit /usr/lib/
rtkit /usr/lib/rtkit/
rtkit /usr/lib/rtkit/rtkit-daemon
rtkit /usr/share/
rtkit /usr/share/dbus-1/
rtkit /usr/share/dbus-1/interfaces/
rtkit /usr/share/dbus-1/interfaces/org.freedesktop.RealtimeKit1.xml
rtkit /usr/share/dbus-1/system-services/
rtkit /usr/share/dbus-1/system-services/org.freedesktop.RealtimeKit1.service
rtkit /usr/share/licenses/
rtkit /usr/share/licenses/rtkit/
rtkit /usr/share/licenses/rtkit/COPYING
rtkit /usr/share/licenses/rtkit/LICENSE
rtkit /usr/share/man/
rtkit /usr/share/man/man8/
rtkit /usr/share/man/man8/rtkitctl.8.gz
rtkit /usr/share/polkit-1/
rtkit /usr/share/polkit-1/actions/
rtkit /usr/share/polkit-1/actions/org.freedesktop.RealtimeKit1.policy

* package version(s)
rtkit 0.11-1.hyperbola1

* config and/or log files etc.

Jun 26 10:41:50 gnu mtp-probe: checking bus 1, device 8: “/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4”
Jun 26 10:41:50 gnu mtp-probe: bus: 1, device: 8 was not an MTP device
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu rtkit-daemon[3059]: Failed to look up client: No such file or directory
Jun 26 10:44:44 gnu pulseaudio[4401]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files

Steps to reproduce:

PackagesAnyBug ReportVery LowLowXenocara xbacklight bugUnconfirmed
0%
Task Description

When i try to set the brightness on my screen, with xbacklight -set 100,

it does this:

No outputs have backlight property

and it doesn’t really matter if I set it lower than 100 or what it currently is at.

Fix when you can please!

PackagesStableBug ReportVery LowMediumUntrsuted gpg keyUnconfirmed
0%
Task Description

Description:
There is an issue with Christian Rebischke key, i’ve tried to delete /etc/pacman.d/gnupg/ and repopulate it but it doesn’t fix the issue.

error: ascii: signature from “Christian Rebischke (Arch Linux Security Team-Member) Chris.Rebischke@archlinux.org” is unknown trust
File /var/cache/pacman/pkg/ascii-3.15-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).

Steps to reproduce:

sudo pacman -S ascii

ServicesHyperWebBug ReportVery LowMediumThe Mailling list don't workUnconfirmed
0%
Task Description

The Mailling list don't work : https://lists.hyperbola.info//mailman/listinfo/

Software DevelopmentGeneralBug ReportHighCriticalRunit errors,Unconfirmed
0%
Task Description

/sbin/openrc-run: bad interpreter: No such file or directory

I get this error whenever I try to start dhcpcd with sv /etc/runit/

And for sndiod I get this doing the same guide,

warning: sndiod: unable to open supervise/ok: file does not exist

Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.

Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.

This is what I did:

=⇒ Add a service:

ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>

more or less, I used this guide.

ServicesHyperWeb IssueBug ReportVery LowLowRSS needs fixingUnconfirmed
0%
Task Description

Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.

PackagesStableBug ReportVery LowMediumPCManFM display different behaviorUnconfirmed
0%
Task Description

Description:

The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted.
I do have dbus, gvfs & ntfs-3g installed and active services.

Additional info:
* package version(s)
PCManFM 1.2.5 - using LibFM ver. 1.2.5

Steps to reproduce:
Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.

PackagesStableBug ReportVery LowLowMupen64plus acts buggyUnconfirmed
0%
Task Description

the screen moves back and forth from left to right randomly, no matter what I do, any games any adapters do not work.

I wanted to have some fun with some old games...

Has anyone used mupen64plus successfully on hyperbola 0.2? I cannot get it to work without being completely confusing for the reasons I have mentioned and also, the glaring of the screen. Which only happens with mupen64plus...

PackagesStableBug ReportVery LowMediumMouse curse become invisible from beginning in kde5 pla...Unconfirmed
0%
Task Description

Description:
I install plasma and xorg to my Hyperbola GNU/Linux-libre in Arch-way.
However, after reboot, everything is fine except mouse curse.

I attempt to reinstall plasma-desktop and reboot. But nothing changes.

In attachment, the mouse stop at backward, however it is invisible.

Additional info:
* package version(s)
plasma-desktop == 5.9.5-1
xorg-server == 1.19.6-2.hyperbola1
sddm == 0.14.0-2.hyperbola6

* config and/or log files etc.

Steps to reproduce:

PackagesStableBug ReportLowMediumGarbled display with xfce4-terminal (terminfo)Unconfirmed
0%
Task Description

A very nasty bug I wasn’t able to find an answer to.
I compiled stuff (buildroot) using menuconfig, the menu display was fine in xfce4-terminal (See screenshot #1)
I restarted the config a few days later with the same command :

$ make menuconfig

and this time the display was messed up (See screenshot #2)

After investigation, I noticed a directory (filled with stuff) have been created in my home folder :

.terminfo

I don’t know why. But anyway, if I delete it, then the display is ok again.
I noticed that if I use good old xterm terminal, then the display is fine even if the .terminfo directory is present. (it uses “xterm” instead of xterm-256color)

But, with xfce4-terminal (and others, I tried with gnome-terminal, sakura..), the display is messed up if the .terminfo directory is present in my home folder.

I also noticed that if I run the command in a screen session, the issue is not present.

(I open xfce4-terminal)

$ screen
$ printenv TERM
screen.xterm-256color
$ make menuconfig (or htop, or other program using ncurses)

= display ok

but with default :

(I open xfce4-terminal)

$ printenv TERM
xterm-256color
make menuconfig (or htop, or other program using ncurses)

= display messed up if .terminfo directory is present

So I have no idea why this .terminfo directory is generated. What could trigger its generation ? Is that an issue with ncurses or something else ?

Thanks for your help

PackagesStableBug ReportVery LowVery LowGajim "Unable to run gpg - it may not be available" Assigned
0%
Task Description

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:


07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.


After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

PackagesStableBug ReportVery LowLowGNOME cannot lock screen while using LightDMUnconfirmed
0%
Task Description

Description:
Screen locking does not work in GNOME, either with keyboard shortcuts or from the menu, while using LightDM.

Additional info:
* According to this thread[1] this bug has been patched in Ubuntu. Please consider applying this patch.[2]

Steps to reproduce:
# pacman -S gnome lightdm lightdm-gtk-greeter
# rc-update add lightdm default
Reboot, log in to a GNOME session and attempt to lock screen.

[1] https://www.reddit.com/r/gnome/comments/9klvej/is_there_a_way_to_get_the_screen_to_lock_with/ [2] https://git.launchpad.net/~ubuntu-desktop/ubuntu/+source/gnome-shell/tree/debian/patches/ubuntu/lightdm-user-switching.patch

ServicesPunBB BrandingBug ReportHighHighForum appearance bugsIn Progress
100%
Task Description

Some forum display errors:

  1. preview button with the orange border.
  1. Error message when logging in gray color making it difficult to read
PackagesAnyBug ReportVery LowHighDesite "noauto" specified in /etc/fstab all devices get...Unconfirmed
0%
Task Description

Description:

I have tried all combinations, but despite “noauto” specified in /etc/fstab all devices get mounted at boot.

Who can help me, not to mount a device during boot?

PackagesStableBug ReportVery LowLowChemical uknown media typesResearching
50%
Task Description

I do not know how to solve this. Some of packages is causing this problem. I do not know which one.

Description:

(4/4) Updating the MIME type database...
Unknown media type in type ‘chemical/x-alchemy’ Unknown media type in type ‘chemical/x-cache’ Unknown media type in type ‘chemical/x-cactvs-ascii’ Unknown media type in type ‘chemical/x-cactvs-binary’ Unknown media type in type ‘chemical/x-cactvs-table’ Unknown media type in type ‘chemical/x-cdx’ Unknown media type in type ‘chemical/x-cdxml’ Unknown media type in type ‘chemical/x-chem3d’ Unknown media type in type ‘chemical/x-cif’ Unknown media type in type ‘chemical/x-cml’ Unknown media type in type ‘chemical/x-daylight-smiles’ Unknown media type in type ‘chemical/x-dmol’ Unknown media type in type ‘chemical/x-gamess-input’ Unknown media type in type ‘chemical/x-gamess-output’ Unknown media type in type ‘chemical/x-gaussian-input’ Unknown media type in type ‘chemical/x-gaussian-log’ Unknown media type in type ‘chemical/x-genbank’ Unknown media type in type ‘chemical/x-gulp’ Unknown media type in type ‘chemical/x-hin’ Unknown media type in type ‘chemical/x-inchi’ Unknown media type in type ‘chemical/x-inchi-xml’ Unknown media type in type ‘chemical/x-jcamp-dx’ Unknown media type in type ‘chemical/x-macromodel-input’ Unknown media type in type ‘chemical/x-mdl-molfile’ Unknown media type in type ‘chemical/x-mdl-rdfile’ Unknown media type in type ‘chemical/x-mdl-rxnfile’ Unknown media type in type ‘chemical/x-mdl-sdfile’ Unknown media type in type ‘chemical/x-mdl-tgf’ Unknown media type in type ‘chemical/x-mmcif’ Unknown media type in type ‘chemical/x-mol2’ Unknown media type in type ‘chemical/x-mopac-graph’ Unknown media type in type ‘chemical/x-mopac-input’ Unknown media type in type ‘chemical/x-mopac-out’ Unknown media type in type ‘chemical/x-msi-car’ Unknown media type in type ‘chemical/x-msi-hessian’ Unknown media type in type ‘chemical/x-msi-mdf’ Unknown media type in type ‘chemical/x-msi-msi’ Unknown media type in type ‘chemical/x-ncbi-asn1’ Unknown media type in type ‘chemical/x-ncbi-asn1-binary’ Unknown media type in type ‘chemical/x-ncbi-asn1-xml’ Unknown media type in type ‘chemical/x-pdb’ Unknown media type in type ‘chemical/x-shelx’ Unknown media type in type ‘chemical/x-vmd’ Unknown media type in type ‘chemical/x-xyz’ Unknown media type in type ‘all/all’ Unknown media type in type ‘all/allfiles’

Software DevelopmentIcedove-UXPBug ReportVery LowMediumCardBook addon make icedove crash wen adding or editing...Unconfirmed
0%
Task Description

the cardbook version is 30.9 i tried with vcard 4.0 and vcard 3.0 same issue editing or creating a contact makes
icedove-uxp crash!

PackagesStableBug ReportVery LowMedium [kodi] "The Movie Database" scraper doesn't workUnconfirmed
0%
Task Description

With kodi 17.1-2.hyperbola1 “The Movie Database” scraper doesn’t work. The error message is :

"Unable to connect to remote server"
PackagesAnyDrop RequestVery LowMedium[hardening-wrapper] deprecated, not needed anymoreUnconfirmed
0%
Task Description

According to : https://github.com/thestinger/hardening-wrapper-deprecated

Wrapper scripts for building hardened executables by default (deprecated, replaced by standard Arch Linux toolchain changes)

PackagesAnyDrop RequestMediumMedium[gksu] is replaced and has to be deleted from our pacma...Researching
0%
Task Description

Description:
From the author’s webpage gksu has been replaced.

Additional info:
* package version(s) : extra/gksu 2.0.2-5

http://www.nongnu.org/gksu/

ServicesGeneralFeature RequestVery LowLowhyperbola branding - add guidelines to packagesUnconfirmed
0%
Task Description

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

PackagesAnyFeature RequestVery LowLowadd package powerkitUnconfirmed
0%
Task Description

https://github.com/rodlie/powerkit/releases

Version 1.0 requested

When you add Lumina desktop, add this package for sure. Although it is compatible with other desktops too. So it would be good to add it regardless.

PackagesAnyFeature RequestVery LowLow[vobsub2srt] please add packageUnconfirmed
0%
Task Description

here is the description from the website

https://github.com/ruediger/VobSub2SRT

VobSub2SRT is a simple command line program to convert .idx / .sub subtitles into .srt text subtitles by using OCR. It is based on code from the MPlayer project - a really really great movie player. Some minor parts are copied from ffmpeg/avutil headers. Tesseract is used as OCR software.

vobsub2srt is released under the GPL3+ license. The MPlayer code included is GPL2+ licensed.

The quality of the OCR depends on the text in the subtitles. Currently the code does not use any preprocessing. But I’m currently looking into adding filters and scaling options to improve the OCR. You can correct mistakes in the .srt files with a text editor or a special subtitle editor.

Attached is a working PKGBUILD for the latest stable version.

PackagesAnyFeature RequestVery HighHigh[unrealircd] needs OpenRC init script and contains syst...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd files

Additional info:

  • unrealircd 4.0.11-2
unrealircd /usr/lib/systemd/system/unrealircd.service
unrealircd /usr/lib/tmpfiles.d/unrealircd.conf

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery HighHigh[umurmur] needs OpenRC init script and contains systemd...Assigned
0%
Task Description

Description:

  • needs OpenRC init script and contains systemd file

Additional info:

  • umurmur 0.2.16_a-6
umurmur /usr/lib/systemd/system/umurmur.service

Steps to reproduce:

  • none
PackagesAnyFeature RequestVery LowVery Low[ttf-iosevka] add Iosevka fontDeferred
0%
Task Description

Iosevka wins a poll about most beautiful fonts on reddit (/r/linux). This font is very similar than Droid Sans (Official Google Font) with many advantages:

1 - Has 5 types modes (lightest, light, normal, bold, super bold)
2 - Condensed and big sizes (perfect for visual impairments users)
3 - Very Legible on i3-wm, Sway, Conky bar
4 - OTF license (Freedom license)

Iosevka is already on AUR, but create a official package prevent bug or proprietary third parties apps (Yaourt, etc) be installed by beginners Hyperbola users.

Official Site:
https://github.com/be5invis/Iosevka

On AUR:
https://aur.archlinux.org/packages/ttf-iosevka

Showing tasks 51 - 100 of 510 Page 2 of 11 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing