All Projects

ProjectCategoryTask TypePrioritySeveritySummaryStatusProgress  desc
PackagesStableBug ReportVery LowMediumPCManFM display different behaviorUnconfirmed
0%
Task Description

Description:

The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted.
I do have dbus, gvfs & ntfs-3g installed and active services.

Additional info:
* package version(s)
PCManFM 1.2.5 - using LibFM ver. 1.2.5

Steps to reproduce:
Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.

PackagesStableFeature RequestVery HighHigh[hiawatha]: remove systemd files, provide openrcResearching
0%
Task Description

Description:

Hiawatha contains only systemd files.

It shall be removed and openrc shall be provided

PackagesStableBug ReportLowMediumGarbled display with xfce4-terminal (terminfo)Unconfirmed
0%
Task Description

A very nasty bug I wasn’t able to find an answer to.
I compiled stuff (buildroot) using menuconfig, the menu display was fine in xfce4-terminal (See screenshot #1)
I restarted the config a few days later with the same command :

$ make menuconfig

and this time the display was messed up (See screenshot #2)

After investigation, I noticed a directory (filled with stuff) have been created in my home folder :

.terminfo

I don’t know why. But anyway, if I delete it, then the display is ok again.
I noticed that if I use good old xterm terminal, then the display is fine even if the .terminfo directory is present. (it uses “xterm” instead of xterm-256color)

But, with xfce4-terminal (and others, I tried with gnome-terminal, sakura..), the display is messed up if the .terminfo directory is present in my home folder.

I also noticed that if I run the command in a screen session, the issue is not present.

(I open xfce4-terminal)

$ screen
$ printenv TERM
screen.xterm-256color
$ make menuconfig (or htop, or other program using ncurses)

= display ok

but with default :

(I open xfce4-terminal)

$ printenv TERM
xterm-256color
make menuconfig (or htop, or other program using ncurses)

= display messed up if .terminfo directory is present

So I have no idea why this .terminfo directory is generated. What could trigger its generation ? Is that an issue with ncurses or something else ?

Thanks for your help

PackagesStableBug ReportVery LowLowGNOME cannot lock screen while using LightDMUnconfirmed
0%
Task Description

Description:
Screen locking does not work in GNOME, either with keyboard shortcuts or from the menu, while using LightDM.

Additional info:
* According to this thread[1] this bug has been patched in Ubuntu. Please consider applying this patch.[2]

Steps to reproduce:
# pacman -S gnome lightdm lightdm-gtk-greeter
# rc-update add lightdm default
Reboot, log in to a GNOME session and attempt to lock screen.

[1] https://www.reddit.com/r/gnome/comments/9klvej/is_there_a_way_to_get_the_screen_to_lock_with/ [2] https://git.launchpad.net/~ubuntu-desktop/ubuntu/+source/gnome-shell/tree/debian/patches/ubuntu/lightdm-user-switching.patch

PackagesStableBug ReportVery LowMediumMouse curse become invisible from beginning in kde5 pla...Unconfirmed
0%
Task Description

Description:
I install plasma and xorg to my Hyperbola GNU/Linux-libre in Arch-way.
However, after reboot, everything is fine except mouse curse.

I attempt to reinstall plasma-desktop and reboot. But nothing changes.

In attachment, the mouse stop at backward, however it is invisible.

Additional info:
* package version(s)
plasma-desktop == 5.9.5-1
xorg-server == 1.19.6-2.hyperbola1
sddm == 0.14.0-2.hyperbola6

* config and/or log files etc.

Steps to reproduce:

PackagesStableReplace RequestVery LowMediumPackage ossp has got systemd dependenciesUnconfirmed
0%
Task Description

Description: Concurrent package ossp in version 1.3.2-15 has got dependencies to systemd, which is contradicting the whole distribution and the used INIT-system. Therefore my request to port this to OpenRC!

Additional info:
* package version(s) 1.3.2-15

PackagesStableBug ReportVery LowMedium [kodi] "The Movie Database" scraper doesn't workUnconfirmed
0%
Task Description

With kodi 17.1-2.hyperbola1 “The Movie Database” scraper doesn’t work. The error message is :

"Unable to connect to remote server"
PackagesStableFreedom IssueVery LowHighGNU Privacy Assistant (GPA)Unconfirmed
0%
Task Description

Hello Hyperbola!

GPA gives out the following errors upon opening the app.

First:

```
The GPGME library returned an unexpected
error at confdialog.c:1459. The error was:

    Unsupported protocol

This is either an installation problem or a bug in GPA.
GPA will now try to recover from this error.
```

Second:

```
Fatal Error in GPGME library
(invoked from file options.c, line 302):

    Unsupported protocol

The application will be terminated

What can I do to overcome these errors?
```
As this issue makes gpa app completely unusable, I have set this bug report’s severity as high.

I also request the admin to set priority to high due to it’s severity.

Thank you!

Regards,
RG.

PackagesStableBug ReportVery LowMedium[arm-unknown-linux-gnueabi-gcc] not working; needs prop...Unconfirmed
0%
Task Description

Description:
I believe the arm-unknown-linux-gnueabi-gcc package to be broken as described here.

Additional info:
* package version(s) - arm-unknown-linux-gnueabi-gcc - all versions

Steps to reproduce:
I don't think "steps to reproduce" to be relevant in this case. My forum topic linked above already contains all the necessary info on the subject :) However, one could try compiling glibc and busybox as described here. Yes, these are instructions for debian-like systems. They have to be adapted accordingly

PackagesStableBug ReportVery LowHigh[vlc] DVB : cache_block stream error: cannot pre fill b...Unconfirmed
0%
Task Description

Current VLC version (3.0.4-3.hyperbola1.backports1) fails to play DVB stream using a RTL2832 usb dongle.

I start the playlist like this :

vlc channels.conf

but it returns the following error :

cache_block stream error: cannot pre fill buffer

Also, it asks the user to be in “video” group to access DVB device, this was not needed before with Hyperbola 0.2.9. User being in “wheel” was enough.
Anyway, even after adding my user to video group, it still fails with “cache_block stream error: cannot pre fill buffer”

This is not an issue with my DVB adapter or driver. rtl2832 is correctly loaded. And I can play the channels.conf playlist just fine with “mpv” or “mplayer”.
Also, the channels.conf used works just fine with a more recent version of VLC on an other system (Manjaro) so something is broken with the current VLC used.

Maybe a package bump would fix the issue.

PackagesStableBug ReportVery LowVery Low[spamassassin] has different directory permissions than...Deferred
0%
Task Description

Description:
The /usr/sbin directory in spamassassin has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/spamassassin/PKGBUILD#n88

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing spamassassin, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* spamassassin 3.4.2-1.hyperbola2

PackagesStableBug ReportVery LowVery Low[postfix] has different directory permissions than 'fil...Deferred
0%
Task Description

Description:
The /usr/sbin directory in postfix has permissions 755
https://git.hyperbola.info:50100/packages/extra.git/tree/postfix/PKGBUILD#n115

And ‘filesystem’ sets it to 750
https://git.hyperbola.info:50100/packages/core.git/tree/filesystem/PKGBUILD#n135

So when installing postfix, pacman throws a warning

warning: directory permissions differ on /usr/sbin/
filesystem: 750  package: 755

Additional info:
* postfix-3.2.2-1.hyperbola6

PackagesStableBug ReportVery LowMedium[sshguard] violates Hyperbola packaging standardsUnconfirmed
0%
Task Description

Description:
The sshguard package should have its /usr/bin/sshguard executable in /usr/sbin, has systemd service files and no OpenRC init script

Additional info:
* sshguard-2.0.0-4
* when I run `sshguard`:

# sshguard
/usr/bin/sshguard: line 87: /usr/bin/journalctl: No such file or directory

* default /etc/sshguard.conf

LOGREADER="LANG=C /usr/bin/journalctl -afb -p info -n1 -t sshd -o cat"
BLACKLIST_FILE=120:/var/db/sshguard/blacklist.db
BACKEND="/usr/lib/sshguard/sshg-fw-iptables"

(commenting the first line temporally solves the issue)

PackagesStableBug ReportVery LowMedium[fail2ban] remove systemd integrationUnconfirmed
0%
Task Description

Description:
This package has a strong systemd integration. It has a systemd backend to get files modifications:

(from /etc/fail2ban/jail.conf)

# systemd:   uses systemd python library to access the systemd journal.
#              Specifying "logpath" is not valid for this backend.
#              See "journalmatch" in the jails associated filter config

and many files at /etc/fail2ban/filter.d have systemd stuff

[/etc/fail2ban/filter.d] [0]
$ grep -i systemd *
dovecot.conf:#journalmatch = _SYSTEMD_UNIT=dovecot.service
ejabberd-auth.conf:# Notes.:  systemd journalctl style match filter for journal based backend
postfix.conf:journalmatch = _SYSTEMD_UNIT=postfix.service
postfix-sasl.conf:#journalmatch = _SYSTEMD_UNIT=postfix.service
pure-ftpd.conf:journalmatch = _SYSTEMD_UNIT=pure-ftpd.service + _COMM=pure-ftpd
recidive.conf:journalmatch = _SYSTEMD_UNIT=fail2ban.service PRIORITY=5
sshd.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
sshd-ddos.conf:journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd

Additional info:
* fail2ban-0.9.6-2.hyperbola3

PackagesStableBug ReportVery LowVery Low[fail2ban] update dovecot failregex to support verbose ...Unconfirmed
0%
Task Description

Description:
The /etc/fail2ban/filter.d/dovecot.conf file has a failregex with the following:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user\s*$

and works with things like:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user

but with verbosity enabled in Dovecot, this output looks like this:

Month day time hostname dovecot: auth: passwd-file(user@domain.com,IP): unknown user (given password: password)

and in this case it doesn’t work, but it does if we fix the failregex if we replace it with:

^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user( \(given password: \S*\))?\s*$

with this new expression, it works with and without verbosity

And regarding postfix, to make it work correctly I “backported” some pieces from newest failregex:

/etc/fail2ban/postfixr-rbl.conf:

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: [45]54 [45]\.7\.1 Service unavailable; Client host \[\S+\] blocked using .* from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

/etc/fail2ban/postfix.conf: (second failregex)

^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: 45[04] 4\.7\.1 Client host rejected: cannot find your (reverse )?hostname, (\[\S*\]); from=<\S*> to=<\S+> proto=ESMTP helo=<\S*>$

I can create a patch if you want. Note that I haven’t tested all filters, some others may also need some rework

Additional info:
* fail2ban-0.9.6-2.hyperbola3

PackagesStableBug ReportVery LowMedium[fail2ban] uses old /usr/bin/sendmail location when it ...Unconfirmed
0%
Task Description

Description:

I saw errors in logs because fail2ban couldn’t find /usr/bin/sendmail, and discovered this:

[/etc/fail2ban] [0]
$ grep /usr/bin/sendmail */*
action.d/sendmail-buffered.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                 Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-buffered.conf:                Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:              Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-common.conf:             Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-geoip-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipjailmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-ipmatches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-lines.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>
action.d/sendmail-whois-matches.conf:            Fail2Ban" | /usr/bin/sendmail -f <sender> <dest>

Please, also check for other binaries with wrong locations

As of now, the solution is as simple as removing this line → https://git.hyperbola.info:50100/packages/community.git/tree/fail2ban/PKGBUILD#n79

Additional info:
* fail2ban-0.9.6-2.hyperbola3

PackagesStableBug ReportVery LowHigh[nftables] init service ERROR: nftables failed to startUnconfirmed
0%
Task Description

Error: conflicting protocols specified: inet-service vs. icmp

when using

ip protocol icmp icmp type echo-request counter accept comment “accept ICMP echo-request type” ip6 nexthdr icmpv6 icmpv6 type { destination-unreachable, packet-too-big, time-exceeded, parameter-problem, mld-listener-query, mld-listener-report, mld-listener-reduction, nd-router-solicit, nd-router-advert, nd-neighbor-solicit, nd-neighbor-advert } accept comment “Accept ICMPv6”

It is a known bug on 0.7 and solved on 0.9

https://bugzilla.netfilter.org/show_bug.cgi?id=1073 commit 0011985554e269e1cc8f8e5b41eb9dcd795ebe8c fixes this problem upstream.

PackagesStableBug ReportVery LowMedium[postgrey] has systemd service and no OpenRC init scrip...Unconfirmed
0%
Task Description

Description:
The title says everything

Also, it doesn’t follow the FHS (/usr/bin/postgrey should be in /usr/sbin)

Additional info:
* postgrey-1.37-1

PackagesStableBug ReportMediumHighopensmtpd: permission problemsIn Progress
0%
Task Description

Description:

cat msg | /usr/sbin/sendmail – sendmail: No such file or directorycannot create temporary file /var/spool/smtpd/offline/1572544775.XXXXIqNsFX

Additional info:
* package version: 6.4.2p1-1.hyperbola2.backports1

It is same problem as here:
https://github.com/OpenSMTPD/OpenSMTPD/issues/839

I could solve it with:

sudo chmod g+s /usr/sbin/smtpctl
sudo chmod g+s /usr/sbin/smtpctl

and then

sudo rc-service smtpd start

Even though I think I should not need to start it to use only sendmail.

PackagesStableBug ReportVery LowLow[autofs]: default configuration is /etc/auto.master ins...Unconfirmed
0%
Task Description

Description:

default configuration is /etc/auto.master instead of /etc/autofs/auto.master

admin→ sudo /usr/bin/automount -v -f -p /run/autofs.pid
Starting automounter version 5.1.2, master map /etc/auto.master
using kernel protocol version 5.02
lookup(file): file map /etc/auto.master missing or not readable
no mounts in table

PackagesStableImplementation RequestVery LowMedium[gcc] Renew to version 8 or 9, including multilibDeferred
0%
Task Description

As even the support for GCC 7 is now ending with the release of version 7.5 (https://gcc.gnu.org/ml/gcc/2019-11/msg00099.html) I’d like to propose a renewal of the building-stack - which I think is also needed in time. Also a renewal of the glibc would be good at all!

PackagesStableImplementation RequestVery LowLow[codelite] Adding new packageUnconfirmed
0%
Task Description

The IDE codelite is an excellent development environment, continuously updated, has a clear vision and active support.
Would be nice to have this one within the repositories in upcoming releases, perhaps 0.5?

PackagesStableBug ReportVery LowMediumlinphonec error (cli version)Unconfirmed
0%
Task Description

Description:
linphonec is unusable because a error produce a continuous log

Additional info:
linphone 3.11.1-1.hyperbola1

Steps to reproduce:
linphonec

Log:
linphonec> 2019-12-15 19:25:58:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:03:012 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:08:018 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:13:013 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:18:016 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:23:014 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:28:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:33:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:38:012 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:43:015 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:48:010 ortp-error-Error in connect: Network is unreachable
2019-12-15 19:26:53:010 ortp-error-Error in connect: Network is unreachable

PackagesStableUpdate RequestVery LowLow[icewm] Upgrade package versionUnconfirmed
0%
Task Description

The current version of the package icewm within the Hyperbola-repositories is 1.3.8. The latest version is 1.6.3!
An update would be helpful as this window-manager follows absolutely the principles of the distribution Hyperbola itself, being simple and fast.

PackagesStableSecurity IssueVery LowCritical[lts-kernel][sec] filter /dev/mem access & restrict acc...Unconfirmed
0%
Task Description

These two options could be enabled :

Kernel hacking → [*] Filter access to /dev/mem
[*] Filter I/O access to /dev/mem

Security options → [*] Restrict unprivileged access to the kernel syslog

PackagesStableBug ReportVery LowLow[dhcpcd-ui] Adding icons from "Network-Manager Applet"Unconfirmed
0%
Task Description

When using the package for wireless connections no further icon is displayed without having the package [b]network-manager-applet[/b] installed.

PackagesStableSecurity IssueVery LowMedium[git] Multiple CVEsUnconfirmed
0%
Task Description

CVE-2020-5260 has been fixed very recently in Debian, so I thought I would apply this patch. However, I found out that security patches have not been applied for quite a while (I could account for at least 6 CVEs).

Considering that the version in Debian stretch (2.11.0) is the nearest version with security patches released by Debian and that git project oldest supported version is 2.17, I have used patches from Debian stretch to apply on 2.12.2 currently in Milky Way.

But I have the following error on check():

 |  *** prove ***
 |
 |  Test Summary Report
 |  -------------------
 |  t5570-git-daemon.sh                              (Wstat: 256 Tests: 20 Failed: 10)
 |    Failed tests:  3-7, 15-19
 |    Non-zero exit status: 1
 |  t5811-proto-disable-git.sh                       (Wstat: 256 Tests: 26 Failed: 16)
 |    Failed tests:  2-6, 9-11, 15-19, 21-23
 |    Non-zero exit status: 1
 |  Files=769, Tests=14137, 1101 wallclock secs ( 8.08 usr  1.12 sys + 144.48 cusr 63.42 csys = 217.10 CPU)
 |  Result: FAIL
 |  make[1]: *** [Makefile:45: prove] Error 1
 |  make[1]: Leaving directory '/build/git/src/git-2.12.2/t'
 |  make: *** [Makefile:2291: test] Error 2
 |  ==> ERROR: A failure occurred in check().
 |      Aborting...

This does not seem to be related to my change as the current version in Milky Way produces the same error (IOW the package currently in Milky Way is not rebuidable).

PackagesStableBug ReportVery LowCritical[gtk-2] Severe problems with GTK2-applicationsUnconfirmed
0%
Task Description

Description: Since the migration to xenocara there seems to be a bug with applications using GTK-2. From time to time there are crashes with assertion `!xcb_xlib_threads_sequence_lost’.

Looking into this a little bit more deep there are also other distributions affected and this is an upstream-bug. But the concrete situation is not that easy, while it could be also part of the library libX11 itself. Looking therefore here: https://bugs.launchpad.net/ubuntu/+source/pcmanfm/+bug/1782984

Affected are for example LXDE in general, icedove, iceweasel and many more!

PackagesStableBug ReportVery LowMediumUntrsuted gpg keyUnconfirmed
0%
Task Description

Description:
There is an issue with Christian Rebischke key, i’ve tried to delete /etc/pacman.d/gnupg/ and repopulate it but it doesn’t fix the issue.

error: ascii: signature from “Christian Rebischke (Arch Linux Security Team-Member) Chris.Rebischke@archlinux.org” is unknown trust
File /var/cache/pacman/pkg/ascii-3.15-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).

Steps to reproduce:

sudo pacman -S ascii

PackagesStableUpdate RequestVery LowMedium[varnish] Missing init scriptUnconfirmed
0%
Task Description

Description:

Init script is missing for this package.

I think has some systemd dependecies.

/tmp/alpm_sYmHUS/.INSTALL: line 7: systemd-sysusers: command not found
error: command failed to execute correctly

package version: varnish-5.1.2-1

PackagesStableBug ReportVery LowMediumnouveau_drv.so: undefined symbol: exaDriverAllocUnconfirmed
0%
Task Description

Any attempt to load Nouveau in X server results in the following error:

nouveau_drv.so: undefined symbol: exaDriverAlloc

Additional info

Steps to reproduce

  1. Stop the X server.
  2. Add a section such as the following to “/etc/X11/xorg.conf”:
    Section "Device"
      Identifier "Video card"
      Driver "nouveau"
      Option "Backlight" "nv_backlight"
    EndSection
  3. Start the X server.
ServicesPunBB IssueBug ReportVery LowLowhyperbola forum smtp error and profile updateUnconfirmed
0%
Task Description

here i will report 2 issues and one change to make
issues:
1- there is a failed smtp error with post and reply
2- in the forum profile one cant add website with .xyz domain name

the change:
1- with pgp key one would add a short key link just like what was mentioned in here:
https://forums.hyperbola.info/viewtopic.php?pid=2639#p2639

ServicesMail Service IssueFeature RequestVery LowLowSupport RFC 3461: Delivery Status Notifications (DSNs)Unconfirmed
0%
Task Description

The RFC 3461 would allow Hyperbola email accounts to request the destination email providers to point out if an email was successfully delivered.

It might not cover all transport failures, but at least has a chance to know in advance whether the message was delivered, discarding the events that happen afterwards (be it to the main inbox or subject to filtering rules such as moving to other folder, marking as spam or deleted after receipt).

Software DevelopmentIceweasel-UXPImplementation RequestDeferLowSwiftweasel-UXP theme for Iceweasel-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftweasel was a Firefox-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since there are users encouraging us develop a Palemoon-based application , and Swiftweasel contains non-trademarked graphics and logos, we could port Swiftweasel to UXP platform as theme for Iceweasel-UXP.

Software DevelopmentIceweasel-UXPBackport RequestVery LowMediumRequest browser add-on: New Tab ToolsUnconfirmed
0%
Task Description

Name: New Tab Tools
Version: 81 (compatible Firefox version 52)
Source code: Github
Description: Customize Firefox’s. Tabs Page

https://github.com/darktrojan/newtabtools

https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/

Software DevelopmentIceweasel-UXPBackport RequestVery LowVery LowRequest browser add-on: FireGesturesUnconfirmed
0%
Task Description

Name: FireGestures
Version: 1.11.1 (compatible Firefox version 52)
Source code: Github
Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.

https://github.com/gomita/firegestures/

https://addons.mozilla.org/en-US/firefox/addon/firegestures/

Software DevelopmentIcedove-UXPImplementation RequestDeferLowSwiftdove-UXP theme for Icedove-UXPUnconfirmed
0%
Task Description

Description:
Historically, Swiftdove was a Thunderbird-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since FossaMail may potentially be revived on UXP in the future [0] and Swiftdove contains non-trademarked graphics and logos, we could port Swiftdove to UXP platform as theme for Icedove-UXP.

Software DevelopmentIcedove-UXPBug ReportVery LowMediumCardBook addon make icedove crash wen adding or editing...Unconfirmed
0%
Task Description

the cardbook version is 30.9 i tried with vcard 4.0 and vcard 3.0 same issue editing or creating a contact makes
icedove-uxp crash!

ServicesHyperWiki/DokuWikiImplementation RequestMediumMediumLibreboot hardening grub guideUnconfirmed
0%
Task Description

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

ServicesHyperWiki/DokuWikiImplementation RequestVery LowMediumProvide binaries for the Ice*-UXP applications in their...Unconfirmed
0%
Task Description

This would ease their usage on other distros.

ServicesHyperWeb IssueBug ReportVery LowLowRSS needs fixingUnconfirmed
0%
Task Description

Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.

ServicesHyperWebBug ReportVery LowMediumThe Mailling list don't workUnconfirmed
0%
Task Description

The Mailling list don't work : https://lists.hyperbola.info//mailman/listinfo/

Software DevelopmentHyperToolsImplementation RequestLowLow[hypertools] create libretools replacement for Hyperbol...Deferred
0%
Task Description

Create hypertools to replace libretools package for HyperbolaBSD and GNU/Linux

It’s long period to develop this package.
For now, a systemd-nspawn wrapper is being developed for “libretools”[0]

[0]:https://issues.hyperbola.info/index.php?do=details&task_id=86

InstallationGeneralFeature RequestVery LowLow[calamares] add graphical installer with FDE supportResearching
0%
Task Description

Package Request: https://github.com/calamares/calamares

Original Bug Report:
— I would also like to test the beta isos when they are ready through qemu. If it looks good I plan to fully install them onto my laptop. My libreboot x200.

I don’t know if I should make a separate feature for this, but xfce is a good stable desktop environment for such a choice. that and lxde.

Though lxde is going to die...

InstallationGeneralImplementation RequestVery LowLowTo make installation instructions and get use of live I...Unconfirmed
0%
Task Description

I have installed multiple times Hyperbola, 4 times on 4 different notebooks.

What I have noticed is that the live ISO is quite huge in relation to the task that should be done. Namely. the live ISO shall at least contain some first packages, so that they do not need to be downloaded online.

Best would be if the live ISO can be copied straight and that system can run from ISO/DVD without having Internet. At least one simple graphical environment shall be included.

Further, I have noticed that there is only network instructions as HTML file.

I would rather call it installation-instructions.html to make it clear for people what it is. Or simply: INSTALL.html so that people understand what it is.

It says just network.html if I remember well.

Then there is absolutely no point or link or reference to the installation instructions.

Each time I got a network I had to go to either duckduckgo search engine or to hyperbola.info website and then I tried with lynx to find installation instructions.

It is not straight, not quite clearly in open, it is in Wiki, but that is quite hard to find.

We have to put ourselves in the shoes of those in need of free software. Millions of people need free software.

Many of us live in a developed western countries.

Yet millions of people in need of this software live in South America, Africa, Asia, Eastern Europe.

There are millions of students that could advance their study, and that could progress faster with free software.

In those countries Internet is often non-existent, universities may be located in poor network areas, Internet is being fetched by using mobile phones.

So if there is a live distribution, such shall at least contain basic software, which really can fit onto any DVD, and that as such can be copied on the computer without using Internet. Upgrades could be fetched by using Internet.

And there shall be clear reference, link or file about installation. There shall be no need to go to Internet to install the software.

InstallationGeneralFeature RequestVery LowLow[FAQ]Please note that not all RAR archives are supporte...Unconfirmed
0%
Task Description

I tried to extract a RAR v5 archive using unar that works fine when using the non-free unrar.

Here is the log (with the file name altered)

$ unar file.part1.rar
file.part1.rar: RAR 5

file.mp4  (-2144860915 B)... Failed! (Attempted to read more data than was available)

Extraction to current directory failed! (1 file failed.)

Please add in the FAQ that newer RAR archives (version 5) may not work when using unar.

ServicesGeneralFeature RequestVery LowLowhyperbola branding - add guidelines to packagesUnconfirmed
0%
Task Description

I could not find any regarding using arch or other branded themes. Parabola apparently rebrands some stuff in their libre repository, eg. they have their own parabola-themes-slim package for slim based themes.

https://issues.hyperbola.info/index.php?do=details&task_id=1213&opened=24&status[0]=

Software DevelopmentGeneralImplementation RequestVery HighCriticalPOWER (ppc64le) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).

NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .

Software DevelopmentGeneralImplementation RequestVery HighCriticalARM (aarch and armv7h) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.

NOTE: ARM porting is focused only for HyperbolaBSD .

Software DevelopmentGeneralImplementation RequestDeferCriticalRISC-V (riscv64) porting + multilib supportDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.

NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .

Showing tasks 51 - 100 of 519 Page 2 of 11 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing