Is that package worth using to generate every sentence of any kind?

Polygen:

• Package name: polygen{,-data}
• Release version: 1.0.6
• Release date: June 28, 2004
• Author(s): Alvise Spanò
• Written in: OCaml
• Licence(s): GPL-2
• Website(s): http://polygen.org/ (in Italian)
• Source code URL(s):
  • http://polygen.org/dist/polygen-1.0.6-20040628-src.zip
  • https://github.com/alvisespano/Polygen/ (alternative)
• Arch package URL(s):
  • https://aur.archlinux.org/packages/polygen/
  • https://aur.archlinux.org/packages/polygen-data/
• Arch package status: Not available on the offical repository, but available on AUR.
• Debian package URL(s):
  • https://packages.debian.org/stable/polygen
  • https://packages.debian.org/stable/polygen-data
• Debian package status: Available on the official repository.

The actual behavior is to create mount points if mountpoint exits with exit status 1, however it may also exit with code 32 and thus creating a real mess:

$ sudo chroot-nspawn
Spawning container megver83 on /var/lib/archbuild/chroot1/megver83
Press ^] three times within 1s to kill container.
mount: /sys/fs/cgroup: mount point does not exist.
mkdir: cannot create directory '/sys/fs/cgroup/blkio': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/cpu': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/cpuacct': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/cpu,cpuacct': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/cpuset': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/devices': No such file or directory  
mkdir: cannot create directory '/sys/fs/cgroup/freezer': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/memory': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/net_cls': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/net_cls,net_prio': No such file or directory
ln: failed to create symbolic link '/sys/fs/cgroup/net_prio': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/pids': No such file or directory
mkdir: cannot create directory '/sys/fs/cgroup/systemd': No such file or directory
mount: /sys/fs/cgroup/blkio: mount point does not exist.
mount: /sys/fs/cgroup/cpuset: mount point does not exist.
mount: /sys/fs/cgroup/devices: mount point does not exist.
mount: /sys/fs/cgroup/freezer: mount point does not exist.
mount: /sys/fs/cgroup/memory: mount point does not exist.
mount: /sys/fs/cgroup/pids: mount point does not exist.

So I created a patch to fix this.

P.S.: although I can git clone the repo with ssh access, whenever I do a push I get:

error: remote unpack failed: unable to create temporary object directory
To ssh://git.hyperbola.info:51100/~git/software/chroot-nspawn.git
 ! [remote rejected] master -> master (unpacker error)
error: failed to push some refs to 'ssh://git.hyperbola.info:51100/~git/software/chroot-nspawn.git'

Do I have the permission to write in this repo? If not, I’d like it, as I’m planning to improve this great script

Description: As sndio has its own problems I’d propose to reactivate ALSA for all UXP-applications.

/sbin/openrc-run: bad interpreter: No such file or directory

I get this error whenever I try to start dhcpcd with sv /etc/runit/

And for sndiod I get this doing the same guide,

warning: sndiod: unable to open supervise/ok: file does not exist

Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.

Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.

This is what I did:

=⇒ Add a service:

ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>

more or less, I used this guide.

As proposed in a separate thread (https://forums.hyperbola.info/viewtopic.php?id=573): The navigation-bar needs a rework when accessing the website about the onion-protocol.

No root settings found in /etc/spacefm/ Setting a root editor in Preferences should remove this warning on startup. Otherwise commands run as root may present a security risk.
EXEC(/usr/share/applications/sakura.desktop)=sakura

I am not sure how much of a risk this is, I will set it at high for now, but feel free to change it to low if its not a huge issue.

doesn’t work automatically, not sure why, but then again, I just reset it using openrc, like this...

doas rc-service sndiod restart

Then it works again, although this bug doesn’t happen on all my Hyperbola 0.4 laptops, which is odd...

For most of my laptops it works automatically, but one of them it doesn’t, might be misconfigured maybe? Idk...

Anywho, I am curious if anyone else has the same problem.

Does not need any insane depends, such as dbus, as far as the website says:

https://developers.hp.com/hp-linux-imaging-and-printing/install/manual/distros/other

its optional,

I would like to see it readded in the future...

I need it for printing, only one of my laptops is on 0.3, for this purpose at this time.

While the X session is still running, did anyone happen key bindings being unresponsive? A few lines of errors appeared from xkbcomp because of a missing keyboard symbol on the single TTY. It reads:

The XKEYBOARD keymap compiler (xkbcomp) reports:
> error:   Could not resolve keysym XF86FullScreen
Errors from xkbcomp are not fatal to the X server

See also related issues affected on other existing distros, were eventually resolved:

• Arch: https://bugs.archlinux.org/task/65730 (FS#65730)
• Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=953032 (Bug#953032)

Description: User reporting problems with sndio. A further check with ALSA showed no active device being used. User has HDMI-sound in usage.

The title says that above if without having required library dependencies for most of them under 32-bit.

After setting up and testing our 32-bit QEMU instance, we often tried to initialize the X11, but it refused to do because of video driver issues.

As well as changing to other video drivers on our instance is still the exact issue.

Here is a log from X11 below we attached.

As the title says, some affected symbolic icons look like on a screencap of the GTK3 Widget Factory we attached below.

Refer To A Pain Clinic?

What Conditions Qualify For Pain Management?

Is Chronic Pain Syndrome Real?

Refer To A Pain Clinic?

What Conditions Qualify For Pain Management?

Is Chronic Pain Syndrome Real?

Here is the problem with ICU where LibreOffice has refused to build without genccode, yet an output log results like this.

makepkg -CLfs:

-- snip --
checking for genccode... no
configure: error: 'genccode' not found in $PATH, install the icu development tool 'genccode'
Error running configure at ./autogen.sh line 299.
-- snip --

pacman -Ql icu:

-- snip --
icu /usr/sbin/
icu /usr/sbin/escapesrc
icu /usr/sbin/genccode
icu /usr/sbin/gencmn
icu /usr/sbin/gennorm2
-- snip --

Few other distros like Debian, NetBSD, and OpenBSD have some own customized login screens, while right here, the actual distro didn’t. I suggest you replacing them for the following paths on the list to come up next package release, which I have three files attached below there.

/etc/X11/xdm:

• Xresources
• Xsetup_0

/usr/share/xdm/pixmaps:

• hyperbola.xpm
• xorg{,-bw}.xpm (removed as unused)