All Projects

ProjectCategoryTask Type  ascPrioritySeveritySummaryStatusProgress
PackagesStableImplementation RequestVery LowLow[codelite] Adding new packageUnconfirmed
0%
Task Description

The IDE codelite is an excellent development environment, continuously updated, has a clear vision and active support.
Would be nice to have this one within the repositories in upcoming releases, perhaps 0.5?

PackagesAnyImplementation RequestVery LowMedium[chdkptp] please add package to control Canon camerasUnconfirmed
0%
Task Description

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. chdkptp requires root privileges to connect to a camera.

PackagesAnyImplementation RequestVery LowLow[chdkptp] please add package to reposUnconfirmed
0%
Task Description

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. Requires root privileges to connect to a camera.

PackagesAnyImplementation RequestMediumMedium[uzem][uzebox] add uzem emulator and uzebox firmware pa...Assigned
0%
Task Description

Add “uzem” emulator and “uzebox” firmware packages[0][1].

It’s a emulator and firmware for fully free 8bit game console.

[0]:http://belogic.com/uzebox/index.asp (no https found)
[1]:https://github.com/Uzebox/uzebox

PackagesAnyImplementation RequestLowLow[nut] add Network UPS Tools 2.7.x packageAssigned
0%
Task Description

Add “nut” package.

Useful for uninterruptible power supplies, power distribution units, solar controllers and servers power supply units.

PackagesAnyImplementation RequestVery LowMedium[gitea] self-hosted git service Assigned
0%
Task Description

Description:

A nice Git service would be welcomed in our pacman.

- https://github.com/go-gitea/gitea

- https://www.archlinux.org/packages/community/x86_64/gitea/

PackagesAnyImplementation RequestVery LowLow[emacs-exwm] add packageAssigned
0%
Task Description

Some users use emacs as a tiling window manager. Please add EXWM[0]

[0]: https://github.com/ch11ng/exwm

PackagesAnyImplementation RequestVery LowLow[SafeEyes] add new packageAssigned
0%
Task Description

Safe Eyes is a program to manage breaks in front of the computer. It has many features that help us adapt it to our needs.

PackagesAnyImplementation RequestLowLow[opmsg] add new packageResearching
0%
Task Description

Description: opmsg is a replacement for gpg which can encrypt/sign/verify your mails or create/verify detached signatures of local files. Even though the opmsg output looks similar, the concept is entirely different.

Additional info:
https://aur.archlinux.org/packages/opmsg/

ServicesFlyspray BrandingImplementation RequestMediumMediumAdd Hyperbola branding to HyperTaskIn Progress
40%
Task Description

Add Hyperbola branding to HyperTask such as HyperWiki and HyperForum for prolixity reasons.

PackagesTestingImplementation RequestLowMedium[spacefm] add new packageIn Progress
0%
Task Description

Add SpaceFM File Manager for Hyperbola

Aur Package: spacefm Debian Package: spacefm

Software DevelopmentHyperBKImplementation RequestVery HighCriticalDevelop a BSD descendant kernel for HyperbolaBSDIn Progress
30%
Task Description

Develop HyperBK (Hyper Berkeley Kernel), a BSD descendant kernel with GPL-compatible licenses preserved, non-compatible ones removed, and new code written under GPL-3 for HyperbolaBSD.

TODO:

  • Download OpenBSD kernel source code from OpenBSD siteDONE
  • Download LibertyBSD scripts to deblob and rebrand kernel from their scripts. → DONE
  • Push source to HyperBK’s project. → DONE
  • Rebrand OpenBSD kernel to HyperbolaBSD with LibertyBSD scripts. → DONE
  • Rebrand entire code (functions, variable, pointers, etc) under HyperbolaBSD → DONE
  • Remove files under non GPL-compatible licenses → DONE
  • Import code from another BSD systems under GPL-compatible licenses → IN PROGRESS
  • Write new code under GPL-3 → IN PROGRESS
  • Package HyperBK for HyperbolaBSD.

PATCHING NOTE

When the check concerns kernel, we obviously want to match with HyperbolaBSD.

Example of triplet check:	hyperbolabsd)
Example of uname -s check:	HyperbolaBSD)
Example of uname -r check:	0.1)
Example of C macro check:	defined(__HyperbolaBSD__)
PackagesAnyImplementation RequestVery HighHigh[murmur-headless] add a Murmur package capable of worki...In Progress
0%
Task Description

Description:

  • Add new a Murmur package capable of working without a graphical user interface. It’s common on servers and embedded devices that requires only interfaces like network (eg. SSH) or serial port to handle services.

Additional info:

  • based on murmur 1.2.19-5

Steps to reproduce:

  • none
PackagesAnyImplementation RequestVery HighHigh[asterisk-headless] add an Asterisk package capable of ...In Progress
0%
Task Description

Description:

  • Add an Asterisk package capable of working without a graphical user interface. It’s common on servers and embedded devices that requires only interfaces like network (eg. SSH) or serial port to handle services.

Additional info:

  • based on asterisk 14.4.0-1

Steps to reproduce:

  • none
PackagesAnyImplementation RequestVery LowLow[3proxy] add package since it's useful for tor on ftp p...Deferred
0%
Task Description

Add “3proxy”[0] package

Useful for tor on ftp proxy[1]

[0]:https://github.com/z3APA3A/3proxy [1]:https://trac.torproject.org/projects/tor/wiki/doc/TorifyHOWTO/FTP

Software DevelopmentHyperToolsImplementation RequestLowLow[hypertools] create libretools replacement for Hyperbol...Deferred
0%
Task Description

Create hypertools to replace libretools package for HyperbolaBSD and GNU/Linux

It’s long period to develop this package.
For now, a systemd-nspawn wrapper is being developed for “libretools”[0]

[0]:https://issues.hyperbola.info/index.php?do=details&task_id=86

PackagesAnyImplementation RequestMediumMedium[ncdu] add new packageDeferred
0%
Task Description

PKGBUILD

# $Id: PKGBUILD 187611 2016-08-26 15:44:01Z bisson $
# Contributor: lp76 <l.peduto@gmail.com>
# Contributor: Daenyth <Daenyth+Arch AT gmail DOT com>
# Maintainer: Gaetan Bisson <bisson@archlinux.org>

pkgname=ncdu
pkgver=1.12
pkgrel=1.hyperbola1
pkgdesc='Disk usage analyzer with an ncurses interface'
url='https://dev.yorhel.nl/ncdu'
license=('custom:MIT')
depends=('ncurses')
arch=('i686' 'x86_64')
validpgpkeys=('74460D32B80810EBA9AFA2E962394C698C2739FA')
source=("https://dev.yorhel.nl/download/${pkgname}-${pkgver}.tar.gz"{,.asc})
sha512sums=('20620dd79d2af878442769e097f13806f64f23875dcb85ebccd573a3de43aba5663d496049b64015d13f9a79d624298032c008ef61dfb6f61d8b12902b8dca12'
            'SKIP')

build() {
    cd "${srcdir}/${pkgname}-${pkgver}"
    ./configure --prefix=/usr
    make
}

package() {
    cd "${srcdir}/${pkgname}-${pkgver}"
    make DESTDIR="${pkgdir}" install
    install -Dm644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}
PackagesAnyImplementation RequestMediumMedium[searx] add new packageDeferred
0%
Task Description

Hi André, you could make an init for the searx search engine, it happens that
I want to launch it from local to avoid being in searx.me or
searx.riseup.net.

I have seen that there is a PKGBUILD in AUR [0]. I think it is necessary to make one with the init Openrc

[0]: https://aur.archlinux.org/packages/searx-py3/

PackagesAnyImplementation RequestVery LowLow[plymouth] add packageDeferred
0%
Task Description

Plymouth is an application that runs very early in the boot process (even before the root filesystem is mounted!) that provides a graphical boot animation while the boot process happens in the background.

Please implement plymouth as an optional package.

PackagesTestingImplementation RequestVery LowMedium[yaics] add packageDeferred
0%
Task Description

Yaics is a simple GNU social client written in C++ and Qt and licensed under the GNU GPL 3.0 (or later).

Please implement yaics as an optional package.

https://stigatle.no/yaics/

https://gitlab.com/stigatle/yaics

PackagesTestingImplementation RequestVery LowLow[sirikata] add packageDeferred
0%
Task Description

Sirikata a platform for virtual worlds.

Sirikata is a platform for virtual worlds. We provide a set of libraries and protocols which can be used to deploy a virtual world, as well as fully featured sample implementations of services for hosting and deploying these worlds.

Please implement sirikata as an optional package.

PackagesAnyImplementation RequestVery LowLow[multipath-tools] add packageDeferred
0%
Task Description

Hello,

Could it be possible to add this package :

multipath-tools

“Multipath tools for Linux (including kpartx)”

License : GPL2

to the repo ?

Thank you

PackagesAnyImplementation RequestVery LowLow[thinkfan] add packageDeferred
0%
Task Description

Could it be possible to add this package :

thinkfan

“A minimalist fan control program. Supports the sysfs hwmon interface and thinkpad_acpi”

License : GPL

to the repo ?

Thanks

Software DevelopmentGeneralImplementation RequestVery HighCriticalPOWER (ppc64le) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).

NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .

Software DevelopmentGeneralImplementation RequestVery HighCriticalARM (aarch and armv7h) portingDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and ARM A7/A53 promises to be a great architecture example for low-power computers, laptops and embedded systems.

NOTE: ARM porting is focused only for HyperbolaBSD .

Software DevelopmentGeneralImplementation RequestDeferCriticalRISC-V (riscv64) porting + multilib supportDeferred
0%
Task Description

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.

NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .

PackagesTestingImplementation RequestMediumMediumlinux-libre-lts-hypersec: New package with extra securi...Deferred
0%
Task Description

Description: Per a user request and to better secure the kernel, we can embed the cryptsetup and ciphers in the kernel. This would mean rather than exposed modules, they are built-in to the kernel and ready to use even without an intramfs.

To be embedded: ciphers aes, twofish, serpent; sha256, sha512 - and the necessary modules (don’t forget the block modes xts, lvm and cryptsetup ...)

Additionally, we could include USB Guard and any other features that meet our social contract and security outlook.

PackagesStableImplementation RequestVery LowMedium[gcc] Renew to version 8 or 9, including multilibDeferred
0%
Task Description

As even the support for GCC 7 is now ending with the release of version 7.5 (https://gcc.gnu.org/ml/gcc/2019-11/msg00099.html) I’d like to propose a renewal of the building-stack - which I think is also needed in time. Also a renewal of the glibc would be good at all!

PackagesAnyPrivacy IssueVery LowMedium[avahi] avahi publishes the hostname by defaultUnconfirmed
0%
Task Description

By default, the ‘disable-publishing’ parameter in the [publish] section of avahi-daemon.conf is set to ‘no’, which can be seen in my opinion as a privacy issue as avahi broadcasts the hostname without the user’s consent even though this has been explicitly disabled in the settings of networkmanager.

PackagesAnyPrivacy IssueVery LowLow[purple-plugin-pack] Provides Napster support which is ...Unconfirmed
0%
Task Description

purple-plugin-pack provides access to Napster which is only useful with a single company and sever (as far as I could tell).

PackagesAnyPrivacy IssueVery LowCritical[bleachbit] needs to be adapted to UXP applicationsAssigned
0%
Task Description

The current version of BleachBit needs to be adapted so it can clean the new .cache/hyperbola/ directory.

PackagesAnyPrivacy IssueVery LowLow[github] check github-related packagesResearching
0%
Task Description

We should check if the following packages run any non-free JS (like youtube-dl) or access a proprietary API:

- hub
- python-pygithub
- python2-pygithub

I haven’t check them, but they look fishy. Take it as a reminder, this is far from being urgent IMO.

PackagesStableReplace RequestVery LowMediumPackage ossp has got systemd dependenciesUnconfirmed
0%
Task Description

Description: Concurrent package ossp in version 1.3.2-15 has got dependencies to systemd, which is contradicting the whole distribution and the used INIT-system. Therefore my request to port this to OpenRC!

Additional info:
* package version(s) 1.3.2-15

PackagesTestingReplace RequestVery LowMedium replace request: NetworkManager with wpa_cuteUnconfirmed
0%
Task Description

https://github.com/loh-tar/wpa-cute/releases

I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.

I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)

or 2019 january. :)

WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:

https://wiki.archlinux.org/index.php/Wpa_supplicant:

Password-related problems

wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.

In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:

# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf

In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed.
Problems with eduroam and other MSCHAPv2 connections

This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.

but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.

It says it cannot get the status of wpa_supplicant when I load it.

This could be an issue if you get rid of NetworkManager for some users.

So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)

PackagesAnyReplace RequestLowLow[appmenu-qt4] replace with appmenu-qt (qt5)Deferred
0%
Task Description

“appmenu-qt4”[0][2] is a deprecated package (release in 2012)[1] and use qt4 unsupported/non-lts software[3], but “appmenu-qt5” not contains any release source code[2]

$ pacman -Si appmenu-qt4
Repository : community
Name : appmenu-qt4
Version : 0.2.6-1
Description : Export Qt4 applications menus over D-Bus
Architecture : x86_64
URL : https://launchpad.net/appmenu-qt Licenses : GPL Groups : None
Provides : None
Depends On : libdbusmenu-qt4
Optional Deps : None
Conflicts With : appmenu-qt
Replaces : appmenu-qt
Download Size : 16.55 KiB
Installed Size : 48.00 KiB
Packager : Antonio Rojas arojas@archlinux.org Build Date : Tue 28 Feb 2017 05:59:31 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature

[0]:https://launchpad.net/appmenu-qt (qt4)
[1]:https://launchpad.net/appmenu-qt/+download [2]:https://launchpad.net/appmenu-qt5 [3]:https://en.wikipedia.org/wiki/Qt_5.6_LTS

PackagesAnyReplace RequestDeferCritical[bzr] replace deprecated GNU Bazaar to BrezyDeferred
0%
Task Description

Description:

  • replace deprecated GNU Bazaar to Brezy for Canis Major

Additional info:

Note: It needs a provide: bazaar and brezy

Steps to reproduce:

  • broken package
PackagesAnySecurity IssueVery LowHigh[octopi] requires suUnconfirmed
0%
Task Description

would it be possible to make it use sudo instead?

From what I know, sudo is safer. Let me know if you agree this is a problem.

PackagesAnySecurity IssueVery LowMedium[qemu] Multiple CVEUnconfirmed
0%
Task Description

CVE-2018-20123 QEMU: pvrdma: memory leakage in device hotplug
https://www.openwall.com/lists/oss-security/2018/12/13/4

CVE-2018-16872 Qemu: usb-mtp: path traversal by host filesystem
manipulation in Media Transfer Protocol (MTP)
https://www.openwall.com/lists/oss-security/2018/12/13/11

Patches included at above URLs.

PackagesAnySecurity IssueVery LowMediumDownload debian-fixes instead of relying on external so...Unconfirmed
0%
Task Description

It happened already with minetest and again with prosody: When trying to build own packages with makepkg there are patches downloaded from the Debian-project. But the given HTTP(S)-sources are no longer available, concrete example within prosody to be found: https://deb.debian.org/debian/pool/main/p/prosody/prosody_0.10.2-1~bpo9+1.debian.tar.xz (not available)

Please don’t rely on those external sources when creating PKGBUILD-files or just give users the possibility for a secure and granted download. Therefore I cannot build prosody on my own now!

PackagesStableSecurity IssueVery LowCritical[lts-kernel][sec] filter /dev/mem access & restrict acc...Unconfirmed
0%
Task Description

These two options could be enabled :

Kernel hacking → [*] Filter access to /dev/mem
[*] Filter I/O access to /dev/mem

Security options → [*] Restrict unprivileged access to the kernel syslog

PackagesAnySecurity IssueVery LowCritical[opensmtpd] CVE-2020-8794Unconfirmed
0%
Task Description

Description: https://www.openwall.com/lists/oss-security/2020/02/24/5 https://www.bleepingcomputer.com/news/security/new-critical-rce-bug-in-openbsd-smtp-server-threatens-linux-distros/

Qualys Security Advisory

LPE and RCE in OpenSMTPD’s default install (CVE-2020-8794)

Contents

Summary
Analysis
...
Acknowledgments

Summary

We discovered a vulnerability in OpenSMTPD, OpenBSD’s mail server. This
vulnerability, an out-of-bounds read introduced in December 2015 (commit
80c6a60c, “when peer outputs a multi-line response ...”), is exploitable
remotely and leads to the execution of arbitrary shell commands: either
as root, after May 2018 (commit a8e22235, “switch smtpd to new
grammar”); or as any non-root user, before May 2018.

Because this vulnerability resides in OpenSMTPD’s client-side code
(which delivers mail to remote SMTP servers), we must consider two
different scenarios:

- Client-side exploitation: This vulnerability is remotely exploitable

in OpenSMTPD's (and hence OpenBSD's) default configuration. Although
OpenSMTPD listens on localhost only, by default, it does accept mail
from local users and delivers it to remote servers. If such a remote
server is controlled by an attacker (either because it is malicious or
compromised, or because of a man-in-the-middle, DNS, or BGP attack --
SMTP is not TLS-encrypted by default), then the attacker can execute
arbitrary shell commands on the vulnerable OpenSMTPD installation.

- Server-side exploitation: First, the attacker must connect to the

OpenSMTPD server (which accepts external mail) and send a mail that
creates a bounce. Next, when OpenSMTPD connects back to their mail
server to deliver this bounce, the attacker can exploit OpenSMTPD's
client-side vulnerability. Last, for their shell commands to be
executed, the attacker must (to the best of our knowledge) crash
OpenSMTPD and wait until it is restarted (either manually by an
administrator, or automatically by a system update or reboot).

We developed a simple exploit for this vulnerability and successfully
tested it against OpenBSD 6.6 (the current release), OpenBSD 5.9 (the
first vulnerable release), Debian 10 (stable), Debian 11 (testing), and
Fedora 31.

The fix is delivered in OpenSMTPD 6.6.4p1, available here, which the developer recommends installing “AS SOON AS POSSIBLE.”

PackagesStableSecurity IssueVery LowMedium[git] Multiple CVEsUnconfirmed
0%
Task Description

CVE-2020-5260 has been fixed very recently in Debian, so I thought I would apply this patch. However, I found out that security patches have not been applied for quite a while (I could account for at least 6 CVEs).

Considering that the version in Debian stretch (2.11.0) is the nearest version with security patches released by Debian and that git project oldest supported version is 2.17, I have used patches from Debian stretch to apply on 2.12.2 currently in Milky Way.

But I have the following error on check():

 |  *** prove ***
 |
 |  Test Summary Report
 |  -------------------
 |  t5570-git-daemon.sh                              (Wstat: 256 Tests: 20 Failed: 10)
 |    Failed tests:  3-7, 15-19
 |    Non-zero exit status: 1
 |  t5811-proto-disable-git.sh                       (Wstat: 256 Tests: 26 Failed: 16)
 |    Failed tests:  2-6, 9-11, 15-19, 21-23
 |    Non-zero exit status: 1
 |  Files=769, Tests=14137, 1101 wallclock secs ( 8.08 usr  1.12 sys + 144.48 cusr 63.42 csys = 217.10 CPU)
 |  Result: FAIL
 |  make[1]: *** [Makefile:45: prove] Error 1
 |  make[1]: Leaving directory '/build/git/src/git-2.12.2/t'
 |  make: *** [Makefile:2291: test] Error 2
 |  ==> ERROR: A failure occurred in check().
 |      Aborting...

This does not seem to be related to my change as the current version in Milky Way produces the same error (IOW the package currently in Milky Way is not rebuidable).

ServicesMail Service IssueSecurity IssueVery LowHighPlease "support" TLS 1.2 instead of requiring it for em...Unconfirmed
0%
Task Description

The requirement for TLS 1.2 in email effectively isolated us from internet, and yelling for change isn’t working even in communications with other free/libre system distributions and mailing lists related to free/libre software (both for software and for discussions related to the movement itself). :)

Many mailing lists at gnu.org, fsf.org, fsfla.org, libreplanet.org, and also in other free/libre system distributions aren’t accessible (e.g.: Trisquel).

ServicesFlyspray IssueSecurity IssueVery LowLowAfter account confirmation, crypt: No salt parameter wa...Unconfirmed
0%
Task Description

After confirming the newly created account (typing the confirmation code, the passwoard and its confirmation, and clicking the button to continue), the following error appears:

  Notice: crypt(): No salt parameter was specified. You must use a randomly generated salt and a strong hash function to produce a secure hash. in /srv/http/flyspray/includes/class.flyspray.php on line 656 

The account login seems to work normaly.

PackagesAnySecurity IssueVery HighCritical[grub2] UEFI SecureBoot vulnerability + multiple flaws ...Unconfirmed
0%
Task Description

https://www.debian.org/security/2020-GRUB-UEFI-SecureBoot/

https://9to5linux.com/grub2-boot-failure-issues-fixed-in-debian-and-ubuntu-update-now

PackagesAnySecurity IssueVery LowMediummount.davfs: unknown file system davfs due to paths cha...Unconfirmed
0%
Task Description

This is same issue as on:
https://bugzilla.redhat.com/show_bug.cgi?id=1151273

The paths changed and trying to mount davfs file system defined in /etc/fstab fails with error: unknown file system davfs

To remedy, I made symlink in /sbin to mount.davfs

The transition of paths had to take that in account as many mounted remote disks failed after upgrade.

PackagesAnySecurity IssueVery LowMedium[patch] CVE-2018-6951 - NULL pointer DoSAssigned
0%
Task Description

An issue was discovered in GNU patch through 2.7.6. There is a segmentation fault, associated with a NULL pointer dereference, leading to a denial of service in the intuit_diff_type function in pch.c, aka a “mangled rename” issue.

https://security-tracker.debian.org/tracker/CVE-2018-6951

PackagesAnySecurity IssueVery LowCritical[unbound] Multiple CVEsAssigned
0%
Task Description

https://ostif.org/our-audit-of-unbound-dns-by-x41-d-sec-full-results/

[Critical] https://security-tracker.debian.org/tracker/CVE-2019-18934

PackagesAnySecurity IssueMediumMedium[openssh] CVE-2018-15919Researching
0%
Task Description

Remotely observable behavior in auth-gss2.c in OpenSSH through 7.8 could be used by remote attackers to detect existence of users on a target system when GSS2 is in use. NOTE: the discoverer states ‘We understand that the OpenSSH developers do not want to treat such a username enumeration (or “oracle”) as a vulnerability.’ https://security-tracker.debian.org/tracker/CVE-2018-15919

PackagesAnySecurity IssueMediumCritical[libjpeg-turbo] CVE-2019-2201Researching
0%
Task Description

In generate_jsimd_ycc_rgb_convert_neon of jsimd_arm64_neon.S, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution in an unprivileged process with no additional execution privileges needed. User interaction is needed for exploitation

https://security-tracker.debian.org/tracker/CVE-2019-2201

Patch: https://github.com/libjpeg-turbo/libjpeg-turbo/issues/388

Showing tasks 451 - 500 of 513 Page 10 of 11<<First - 7 - 8 - 9 - 10 - 11 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing