Hello,

Could it be possible to add this package :

gcdemu

“GNOME panel applet controlling cdemu-daemon”

https://aur.archlinux.org/packages/gcdemu

http://cdemu.sourceforge.net/

License : GPL2

Thanks

Hello,

Could it be possible to add this package :

python-cheat

“Cheat allows you to create and view interactive cheatsheets on the command-line.”

https://aur.archlinux.org/packages/python-cheat/

https://github.com/chrisallenlane/cheat

License : GPL3

Thanks

Hello,

Could it be possible to add this package :

accuraterip-checksum

“A C99 commandline program to compute the AccurateRip checksum of singletrack WAV files”

https://www.parabola.nu/packages/community/x86_64/accuraterip-checksum/

License : GPL

Thanks

Hello,

Could it be possible to add this package :

pacpl

“Convert multiple audio types from one format to another.”

https://aur.archlinux.org/packages/pacpl/

License : GPL

Dependencies needed (and currently missing in Hyperbola repo) :

perl-ogg-vorbis-header perl-mp4-info perl-mp3-tag perl-audio-flac-header perl-audio-musepack perl-parallel-forkmanager perl-cddb

Hello,

Could it be possible to add this package :

gmusicbrowser

“A customizable open-source jukebox for large collections”

https://www.parabola.nu/packages/pcr/any/gmusicbrowser/

License : GPL3

Thanks

Hello,

Could it be possible to add this package :

quiterss

“Fast and light RSS/Atom feed reader written in Qt/С++”

https://aur.archlinux.org/packages/quiterss

License : GPL3

Thanks

Hello,

Would it be possible to add this package :

wekan

“Wekan is an completely Open Source and Free software collaborative kanban board application”

https://github.com/wekan/wekan

License : MIT

Thanks

Hello,

Would it be possible to add this package :

moloch

“ Moloch is an open source, large scale, full packet capturing, indexing, and database system.”

http://molo.ch

https://github.com/aol/moloch

License : Apache2

Thanks

http://scidvspc.sourceforge.net/

«Unlike most chess engines, Stockfish is open source (GPL license). That means you can read the code, modify it, contribute back, and even use it in your own projects.» I do not know if it is libre. If it is, together with Scid, Hyperbola is one step closer for every chess lover out there who also loves freedom!
https://stockfishchess.org/

Hello,

Could it be possible to add this package :

powerpill

“Pacman wrapper for faster downloads.”

https://aur.archlinux.org/packages/powerpill/

https://xyne.archlinux.ca/projects/powerpill

License : GPL

Thanks

Hello,

Could it be possible to add this package :

flacon

“Extracts individual tracks from one big audio file containing the entire album of music and saves them as separate audio files.”

https://aur.archlinux.org/packages/flacon/

https://flacon.github.io/

License : LGPL2.1

Thanks

Hello,

It would be great to add this package :

gogs

“Self Hosted Git Service written in Go”

https://aur.archlinux.org/packages/gogs

openrc init scripts : https://aur.archlinux.org/packages/gogs-openrc

License : GPL

Thanks

Hello,

Could it be possible to add this package :

gimagereader

“A graphical frontend to tesseract-ocr”

https://aur.archlinux.org/packages/gimagereader

License : GPL3

Thanks

I have installed multiple times Hyperbola, 4 times on 4 different notebooks.

What I have noticed is that the live ISO is quite huge in relation to the task that should be done. Namely. the live ISO shall at least contain some first packages, so that they do not need to be downloaded online.

Best would be if the live ISO can be copied straight and that system can run from ISO/DVD without having Internet. At least one simple graphical environment shall be included.

Further, I have noticed that there is only network instructions as HTML file.

I would rather call it installation-instructions.html to make it clear for people what it is. Or simply: INSTALL.html so that people understand what it is.

It says just network.html if I remember well.

Then there is absolutely no point or link or reference to the installation instructions.

Each time I got a network I had to go to either duckduckgo search engine or to hyperbola.info website and then I tried with lynx to find installation instructions.

It is not straight, not quite clearly in open, it is in Wiki, but that is quite hard to find.

We have to put ourselves in the shoes of those in need of free software. Millions of people need free software.

Many of us live in a developed western countries.

Yet millions of people in need of this software live in South America, Africa, Asia, Eastern Europe.

There are millions of students that could advance their study, and that could progress faster with free software.

In those countries Internet is often non-existent, universities may be located in poor network areas, Internet is being fetched by using mobile phones.

So if there is a live distribution, such shall at least contain basic software, which really can fit onto any DVD, and that as such can be copied on the computer without using Internet. Upgrades could be fetched by using Internet.

And there shall be clear reference, link or file about installation. There shall be no need to go to Internet to install the software.

So avatar uploading is not working well, and picture is getting minimized to nothing.

Hello,

Could it be possible to add this package :

exifread

“Python library to extract EXIF data from tiff and jpeg files”

https://aur.archlinux.org/packages/exifread/

Thanks

Description:
Historically, Swiftweasel was a Firefox-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since there are users encouraging us develop a Palemoon-based application , and Swiftweasel contains non-trademarked graphics and logos, we could port Swiftweasel to UXP platform as theme for Iceweasel-UXP.

Description:
Historically, Swiftdove was a Thunderbird-based application built on XUL platform around 2007 and abandoned in 2010. It was optimized for several architectures using the following methods such as the Profile-Guided Optimization (PGO) and binary code optimization for computers with limited resources.

Since FossaMail may potentially be revived on UXP in the future [0] and Swiftdove contains non-trademarked graphics and logos, we could port Swiftdove to UXP platform as theme for Icedove-UXP.

Could it be possible to add :

obmenu-generator

A fast pipe/static menu generator for the Openbox Window Manager (with icons support)

License : GPL3

https://github.com/trizen/obmenu-generator https://www.parabola.nu/packages/pcr/x86_64/obmenu-generator/

Thanks

Hello,

I stumbled upon this music player recently, it is very promising and fully free (GPL3)

“Sayonara is a small, clear and fast audio player for Linux written in C++, supported by the Qt framework. It uses GStreamer as audio backend. Sayonara is open source and uses the GPLv3 license. One of Sayonara’s goals is intuitive and easy usablility. Currently, it is only available for Linux and BSD.

Although Sayonara can be considered as a lightweight player, it holds a lot of features in order to organize even big music collections.”

Latest version is 1.1.1 and it is very stable on my hyperbola system. I think it would be a great addition to Hyperbola repo.

https://sayonara-player.com/

A PKGBUILD is available here :

https://sayonara-player.com/sw/arch_linux/PKGBUILD

A Material-like flat theme for GTK+ 2/3, and GNOME shell, released under a GNU General Public Licence (GNU GPL) 2 and later.

• Arch package URL: https://www.archlinux.org/packages/community/any/materia-gtk-theme
• Source code URL: https://github.com/nana-4/materia-theme

Could it be possible to add :

mkv-extractor-qt

“Graphical MKV demultiplexer”

https://aur.archlinux.org/packages/mkv-extractor-qt/

License: GPL3

Thanks

Could it be possible to add :

vidcutter

“A modern, simple to use, constantly evolving and hella fast MEDIA CUTTER + JOINER w/ frame-accurate SmartCut technology + Qt5, libmpv, FFmpeg and MediaInfo powering the backend.”

License : GPL3

https://aur.archlinux.org/packages/vidcutter/

https://vidcutter.ozmartians.com/

Request for :

qarte

“Allow you to browse into the archive of arte+7 & arteLiveWeb sites and to record your prefered videos.”

https://aur.archlinux.org/packages/qarte

License : GPL3

Description: opmsg is a replacement for gpg which can encrypt/sign/verify your mails or create/verify detached signatures of local files. Even though the opmsg output looks similar, the concept is entirely different.

Additional info:
https://aur.archlinux.org/packages/opmsg/

Please add xfce4-alsa-plugin (to get rid of pulseaudio plugin on xfce)

License: GPL3

https://aur.archlinux.org/packages/xfce4-alsa-plugin/ https://github.com/equeim/xfce4-alsa-plugin

A format is not known or recognized in the original code base. To add a string into at the audio section in xferc.in:

opus = "<audioplayer>,<audioplayer>,audacity;Opus Audio;mp3_32x32.png;mp3_16x16.png;;"

Some users use emacs as a tiling window manager. Please add EXWM[0]

[0]: https://github.com/ch11ng/exwm

Safe Eyes is a program to manage breaks in front of the computer. It has many features that help us adapt it to our needs.

The IDE codelite is an excellent development environment, continuously updated, has a clear vision and active support.
Would be nice to have this one within the repositories in upcoming releases, perhaps 0.5?

CHDKPTP is part of CHDK project - a free software firmware add-on for Canon cameras. It enables controlling Canon cameras via the computer.

Attached is a modified iup PKGBUILD (Lua 5.3 build was removed as it failed to compile) and configuration files for chdkptp.

Code is available via svn:

$ svn co http://subversion.assembla.com/svn/chdkptp/trunk chdkptp

Copy chdkptp.sh and config.mk files to source tree then compile via make. Requires root privileges to connect to a camera.

The current version of BleachBit needs to be adapted so it can clean the new .cache/hyperbola/ directory.

By default, the ‘disable-publishing’ parameter in the [publish] section of avahi-daemon.conf is set to ‘no’, which can be seen in my opinion as a privacy issue as avahi broadcasts the hostname without the user’s consent even though this has been explicitly disabled in the settings of networkmanager.

purple-plugin-pack provides access to Napster which is only useful with a single company and sever (as far as I could tell).

We should check if the following packages run any non-free JS (like youtube-dl) or access a proprietary API:

- hub
- python-pygithub
- python2-pygithub

I haven’t check them, but they look fishy. Take it as a reminder, this is far from being urgent IMO.

Description:

• replace deprecated GNU Bazaar to Brezy for Canis Major

Additional info:

• bzr 2.7.0-2
• GNU Bazaar will be unmaintained (for now, there are only bug fixes)
• GNU Bazaar only supports Python 2.
• Python 2.7 is the end of the Python 2 line of development. [0]
• There never will be an official Python 2.8 release.
• Or use Tauthon (fork of Python 2.7) as dependency.

Note: It needs a provide: bazaar and brezy

Steps to reproduce:

• broken package

Description: Concurrent package ossp in version 1.3.2-15 has got dependencies to systemd, which is contradicting the whole distribution and the used INIT-system. Therefore my request to port this to OpenRC!

Additional info:
* package version(s) 1.3.2-15

https://github.com/loh-tar/wpa-cute/releases

I know there are plans to remove NetworkManager. I wondered if we could replace it in 0.4 with Wpa_Cute. seen in the above link.

I haven’t been able to compile it, but it has been updated as recent as 2018 december (stable)

or 2019 january. :)

WPA_GUI doesn’t seem to work well for me, it runs into weird errors when I start it. Long story short, I run into this issue with wpa_supplicant when i do it manually:

https://wiki.archlinux.org/index.php/Wpa_supplicant:

Password-related problems

wpa_supplicant may not work properly if directly passed via stdin particularly long or complex passphrases which include special characters. This may lead to errors such as failed 4-way WPA handshake, PSK may be wrong when launching wpa_supplicant.

In order to solve this try using here strings wpa_passphrase <MYSSID> «< “<passphrase>” or passing a file to the -c flag instead:

# wpa_supplicant -i <interface> -c /etc/wpa_supplicant/example.conf

In some instances it was found that storing the passphrase cleartext in the psk key of the wpa_supplicant.conf network block gave positive results (see [2]). However, this approach is rather insecure. Using wpa_cli to create this file instead of manually writing it gives the best results most of the time and therefore is the recommended way to proceed.
Problems with eduroam and other MSCHAPv2 connections

This is my issue with wpa_supplicant sadly... and I do not know how to workaround that without a GUI.

but Wpa_Supplicant_gui does not fix it either, it doesn’t even load properly on my other laptop.

It says it cannot get the status of wpa_supplicant when I load it.

This could be an issue if you get rid of NetworkManager for some users.

So yeah, please take a look at my request okay? Wait for 0.3 to be released to add this if possible. I know you guys are overworked, etc... and it doesn’t need to be done now anyhow. ;)

“appmenu-qt4”[0][2] is a deprecated package (release in 2012)[1] and use qt4 unsupported/non-lts software[3], but “appmenu-qt5” not contains any release source code[2]

$ pacman -Si appmenu-qt4
Repository : community
Name : appmenu-qt4
Version : 0.2.6-1
Description : Export Qt4 applications menus over D-Bus
Architecture : x86_64
URL : https://launchpad.net/appmenu-qt Licenses : GPL Groups : None
Provides : None
Depends On : libdbusmenu-qt4
Optional Deps : None
Conflicts With : appmenu-qt
Replaces : appmenu-qt
Download Size : 16.55 KiB
Installed Size : 48.00 KiB
Packager : Antonio Rojas arojas@archlinux.org Build Date : Tue 28 Feb 2017 05:59:31 AM -03
Validated By : MD5 Sum SHA-256 Sum Signature

[0]:https://launchpad.net/appmenu-qt (qt4)
[1]:https://launchpad.net/appmenu-qt/+download [2]:https://launchpad.net/appmenu-qt5 [3]:https://en.wikipedia.org/wiki/Qt_5.6_LTS

Avahi is a zero-configuration networking implementation that contains critical security issues because mDNS operates under a different trust model than unicast DNS trusting the entire network rather than a designated DNS server, it is vulnerable to spoofing attacks by any system within the multicast IP range. Like SNMP and many other network management protocols, it can also be used by attackers to quickly gain detailed knowledge of the network and its machines. [0]

Since it violates the Hyperbola Social Contract , Avahi should be blacklisted.

In generate_jsimd_ycc_rgb_convert_neon of jsimd_arm64_neon.S, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution in an unprivileged process with no additional execution privileges needed. User interaction is needed for exploitation

https://security-tracker.debian.org/tracker/CVE-2019-2201

Patch: https://github.com/libjpeg-turbo/libjpeg-turbo/issues/388

https://ostif.org/our-audit-of-unbound-dns-by-x41-d-sec-full-results/

[Critical] https://security-tracker.debian.org/tracker/CVE-2019-18934

These two options could be enabled :

Kernel hacking → [*] Filter access to /dev/mem
[*] Filter I/O access to /dev/mem

Security options → [*] Restrict unprivileged access to the kernel syslog

Description: https://www.openwall.com/lists/oss-security/2020/02/24/5 https://www.bleepingcomputer.com/news/security/new-critical-rce-bug-in-openbsd-smtp-server-threatens-linux-distros/

Qualys Security Advisory

LPE and RCE in OpenSMTPD’s default install (CVE-2020-8794)

in OpenSMTPD's (and hence OpenBSD's) default configuration. Although
OpenSMTPD listens on localhost only, by default, it does accept mail
from local users and delivers it to remote servers. If such a remote
server is controlled by an attacker (either because it is malicious or
compromised, or because of a man-in-the-middle, DNS, or BGP attack --
SMTP is not TLS-encrypted by default), then the attacker can execute
arbitrary shell commands on the vulnerable OpenSMTPD installation.

OpenSMTPD server (which accepts external mail) and send a mail that
creates a bounce. Next, when OpenSMTPD connects back to their mail
server to deliver this bounce, the attacker can exploit OpenSMTPD's
client-side vulnerability. Last, for their shell commands to be
executed, the attacker must (to the best of our knowledge) crash
OpenSMTPD and wait until it is restarted (either manually by an
administrator, or automatically by a system update or reboot).

https://www.debian.org/security/2020-GRUB-UEFI-SecureBoot/

https://9to5linux.com/grub2-boot-failure-issues-fixed-in-debian-and-ubuntu-update-now

would it be possible to make it use sudo instead?

From what I know, sudo is safer. Let me know if you agree this is a problem.

https://www.openwall.com/lists/oss-security/2019/12/20/2

“This is a security release to fix a number of issues that were found by Kaspersky Lab. These issues affect both the client and server and could theoretically allow an malicious peer to take control over the software on the other side.”

Remove “cinepaint” package since it’s unmaintained and unsupportable. Also, it doesn’t contains any file format support in the latest version (previous version supported multiple file formats).

I suggest use Krita (or Gimp 2.10) to edit 16bit and 32bit file formats or convert with imagemagick/graphicsmagick.

$ pacman -Si cinepaint
Repository      : community
Name            : cinepaint
Version         : 1:1.0.4-5
Description     : Sophisticated graphics manipulation programm supporting > 8bit pictures
Architecture    : x86_64
URL             : http://www.cinepaint.org
Licenses        : LGPL  GPL  MIT
Groups          : None
Provides        : None
Depends On      : gtk2  openexr  lcms  libxpm  fltk  ftgl  libxxf86vm
Optional Deps   : python2: for python plug-ins
                  gutenprint: for print plug-ins
                  ghostscript: for pdf plug-ins
Conflicts With  : None
Replaces        : None
Download Size   : 3.75 MiB
Installed Size  : 13.91 MiB
Packager        : Christian Hesse <arch@eworm.de>
Build Date      : Thu 28 Apr 2016 05:17:05 AM -03
Validated By    : MD5 Sum  SHA-256 Sum  Signature

Remotely observable behavior in auth-gss2.c in OpenSSH through 7.8 could be used by remote attackers to detect existence of users on a target system when GSS2 is in use. NOTE: the discoverer states ‘We understand that the OpenSSH developers do not want to treat such a username enumeration (or “oracle”) as a vulnerability.’ https://security-tracker.debian.org/tracker/CVE-2018-15919