All Projects

The RFC 3461 would allow Hyperbola email accounts to request the destination email providers to point out if an email was successfully delivered.

It might not cover all transport failures, but at least has a chance to know in advance whether the message was delivered, discarding the events that happen afterwards (be it to the main inbox or subject to filtering rules such as moving to other folder, marking as spam or deleted after receipt).

«Unlike most chess engines, Stockfish is open source (GPL license). That means you can read the code, modify it, contribute back, and even use it in your own projects.» I do not know if it is libre. If it is, together with Scid, Hyperbola is one step closer for every chess lover out there who also loves freedom!
https://stockfishchess.org/

5.4 version desired, it would be nice to still see the ciphers in Iceape.

So avatar uploading is not working well, and picture is getting minimized to nothing.

I would like this to be available for Iceape as well V4.13

http://scidvspc.sourceforge.net/

/sbin/openrc-run: bad interpreter: No such file or directory

I get this error whenever I try to start dhcpcd with sv /etc/runit/

And for sndiod I get this doing the same guide,

warning: sndiod: unable to open supervise/ok: file does not exist

Although rather ironically, If I type sndiod or dhcpcd into root, it works just fine.

Maybe its an FHS issue or possibly, I am screwing up? I am not sure. Feedback is welcome.

This is what I did:

=⇒ Add a service:

ln -s /etc/sv/<service> /var/service
==> Start/stop/restart a service:
sv <start/stop/restart> <service>

more or less, I used this guide.

Name: New Tab Tools
Version: 81 (compatible Firefox version 52)
Source code: Github
Description: Customize Firefox’s. Tabs Page

https://github.com/darktrojan/newtabtools

https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/

Name: FireGestures
Version: 1.11.1 (compatible Firefox version 52)
Source code: Github
Description: A customizable mouse gestures extension which enables to execute various commands and user scripts with six types of gestures.

https://github.com/gomita/firegestures/

https://addons.mozilla.org/en-US/firefox/addon/firegestures/

Similar to systemd, pulseaudio or libpulse is forced upon users as many packages require it such as kodi, gnome-shell (and thus also gdm), ffmpeg, gst-plugins-good, simplescreenrecorder, clementine, empathy, seamonkey (iceape), fluidsynth, mumble and qemu, Most/all of these packages can probably be compiled with pulseaudio or libpulse as an optional dependency instead.

random_agent_spoofer-0.9.5.8.4-fx.xpi is the version I desire, can you implement it?

Seems deleted items reappearing in the Hyperbola feeds since it gives its feed items empty ID string.

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and RISC-V promises to be a great architecture example for low-power computers, laptops and embedded systems, also as ARM architecture replacement.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the RISC-V architecture (riscv64) with multilib support.

NOTE: RISC-V porting is focused only for Hyperbola GNU/Linux-libre .

1:2.8 or later, qemu-kvm

This would make qemu so much easier and faster, please support this package.

This would ease their usage on other distros.

This addon works for any firefox based browser but not seamonkey based or this.

I wondered if you could implement the iceweasel one for Iceape.

Description: Concurrent package ossp in version 1.3.2-15 has got dependencies to systemd, which is contradicting the whole distribution and the used INIT-system. Therefore my request to port this to OpenRC!

Additional info:
* package version(s) 1.3.2-15

The unfortunate reality is that x86 computers come encumbered with built-in low-level backdoors like the Intel Management Engine , as well as nonfree boot firmware. This means that users can’t gain full control over their computers, even if they install a free operating system such as Hyperbola GNU/Linux-libre .

Hyperbola is working hard to fix these issues and getting closer every day, but for the time being, this is why many current Respects Your Freedom (RYF) offerings are refurbished older devices.

For the future of free computing, we need support architectures that do not come with such malware pre-installed, and the Power9-based Talos II promises to be a great architecture example for workstations and servers environments where Hyperbola is focused since is a fully free long-term support distribution.

Devices like this are the future of computing that Respects Your Freedom and for that reason it’s a high priority for Hyperbola port all packages for the POWER architecture (power64le).

NOTE: POWER porting is focused only for Hyperbola GNU/Linux-libre .

Description:

The problem is pcmanfm is not showing any partitions on the left side. It only show Home Folder, Desktop, Applications, Filesystem and the ext. hdd. If I include dbus-launch pcmanfm -d command, it show the other partitions on the left side of window but not ext. hdd. The drive/partitions are not encrypted.
I do have dbus, gvfs & ntfs-3g installed and active services.

Additional info:
* package version(s)
PCManFM 1.2.5 - using LibFM ver. 1.2.5

Steps to reproduce:
Original install from the livecd with LXDE but I may run Openbox standalone and get the same behavior with either environment. I do not have this issue running other distros.

1.2.4 version would be nice for Iceape.

the screen moves back and forth from left to right randomly, no matter what I do, any games any adapters do not work.

I wanted to have some fun with some old games...

Has anyone used mupen64plus successfully on hyperbola 0.2? I cannot get it to work without being completely confusing for the reasons I have mentioned and also, the glaring of the screen. Which only happens with mupen64plus...

Description:
I install plasma and xorg to my Hyperbola GNU/Linux-libre in Arch-way.
However, after reboot, everything is fine except mouse curse.

I attempt to reinstall plasma-desktop and reboot. But nothing changes.

In attachment, the mouse stop at backward, however it is invisible.

Additional info:
* package version(s)
plasma-desktop == 5.9.5-1
xorg-server == 1.19.6-2.hyperbola1
sddm == 0.14.0-2.hyperbola6

* config and/or log files etc.

Steps to reproduce:

The Knock patches for linux-libre maintained by you at https://git.hyperbola.info:50100/kernels/knock.git/ have support up to linux-libre 4.13 only (and I think it didn’t work for it when I tried it, compilation failed) but from all of those supported versions, the newest maintained generation by the upstream is 4.9.x

However, since newer kernel generations might require reprogramming the patch, I want to request it only for the latest LTS generation which is 4.14. As you know, LTS software are supported for a long time, so it’s worth to make it for linux-libre 4.14.x

This might not be really important for Hyperbola in the short term, but you are the maintainers of the TCP Stealth implementation for Linux-libre and I and maybe other people would like to use it in their projects for newer versions.

Plus, it would be great since while 4.9 kernels can use the GRSec+Knock combination like linux-libre-lts-unofficial-grsec-knock, with support for 4.14 anyone would be able to use a combination of newer patches such as Linux-hardened+Knock (Linux-hardened supports 4.14 and 4.15 as of now) which is what I’d like to do.
https://github.com/copperhead/linux-hardened/releases

I don’t know if this is the best place for this, but I get stuck on the hardening the grub guide from libreboot,

https://libreboot.org/docs/gnulinux/grub_hardening.html

I wondered if there is anything different that needs to be done to get this part done:

gpg –homedir keys –detach-sign my.initramfs
gpg –homedir keys –detach-sign my.kernel
gpg –homedir keys –detach-sign libreboot_grub.cfg
gpg –homedir keys –detach-sign my.grubtest.cfg

it gives me a bunch of weird errors

The Juniper Networks Certified Expert Security (JNCES) is aimed to authorize the networking experts’ ability to deploy, implement, manage and fix JUNOS-based security platforms. The Juniper certified security professionals have the capability to deploy manage, configure and troubleshoot the junos for the businesses.

An issue with the scanner is quite possibly the most well-known ones and can be settled in the event that you want to eliminate the Apple Pay to Cash App mistake by utilizing the strategies that you can without much of a stretch find in the assistance community or investigate visiting the technical support locales.

This already works for it, but I just thought I would request it to be put in.

Does not need any insane depends, such as dbus, as far as the website says:

https://developers.hp.com/hp-linux-imaging-and-printing/install/manual/distros/other

its optional,

I would like to see it readded in the future...

I need it for printing, only one of my laptops is on 0.3, for this purpose at this time.

We work closely as a reliable third party QuickBooks support provider, which helps all frustrated QuickBooks users. We’ve the potential to affect minor or major QuickBooks error codes smartly. If you’re facing QuickBooks error 15241 on a day to day, you need to call our certified QuickBooks support team immediately. This error code relates to QuickBooks payroll function that forestalls QuickBooks desktop software to place within the updates correctly. Our live QuickBooks experts have full knowledge and extensive experience to identify the foremost reasons of this error code and apply the suitable techniques to unravel this error code within a few of seconds. https://www.quickbookssupportphonenumber247.co/blog/resolve-quickbooks-error-15241/

If you wish to unlock Yahoo account without phone number and email address, then you must go to the account recovery page of the Yahoo mail official site. Next, you are asked to enter your email address in the specified box and then click on the Continue tab. Next, you have to click on the Yes, send me the account key.
https://www.customercare-email.com/blog/unlock-my-yahoo-account/

Bellsouth email and Microsoft Outlook or a lethal combination add to get both of them together you will need to complete bills of Bellsouth email settings on Outlook. Firstly, open Outlook client, go to file, and click add an account. Now you need to choose manually configure server settings or additional server types and click Next. Now enter the below details in the incoming mail server and outgoing mail server on Outlook.

Incoming mail server (IMAP)
Server name – imap.mail.yahoo.com.
Port number – 995.
IMAP Security – SSL/TLS.
Username – Your full BellSouth email address.
Password – Your BellSouth email password.

Outgoing mail server (IMAP)
Server name – smtp.mail.yahoo.com.
Port number – 465.
IMAP Security – SSL/TLS.
Username – Your full BellSouth email address.
Password – Your BellSouth email password.

Outlook is one of the most popular emailing services, which is mainly used by countless people to send or receive emails. It is the most effective way to communicate with anyone, so countless users select it for many purposes. It has the potential to store notes, tasks, and calendars. I want to send or receive emails through my outlook account, so I am not able to precede this task. For this purpose, I need to connect to the outlook exchange server with the aim of sending or receiving emails. I am experiencing difficulty to connect to the server. I don’t have the solid resolutions to fix outlook cannot connect to server issue. Can anyone recommend the easy methods to fix this issue?

To resolve External LinkGmail not receiving emails issue on Android phone, one has to follow some steps such as:
1. First, update or check the server.
2. Then go to Settings and click on the Filters and Blocked Address option.
3. After that, turn on the auto-sync option.
4. Next, change the data server settings.
By following the above-mentioned steps, Android users can resolve this issue. Although if the issue still exists then contact our support team.

To resolve Gmail not receiving emails issue on Android phone, one has to follow some steps such as:
1. First, update or check the server.
2. Then go to Settings and click on the Filters and Blocked Address option.
3. After that, turn on the auto-sync option.
4. Next, change the data server settings.
By following the above-mentioned steps, Android users can resolve this issue. Although if the issue still exists then contact our support team.

Apart from the fact that every SEO Services provider you see will pretend to be the best SEO services provider, there are some that are pretty good in real life. If you don’t have an eye to find out the best and professional SEO services, here are things that you should consider.
Instead of relying on the customer reviews entirely, trust your friends and knowns who have taken the SEO services before.
Learn more about the knowledge and processes of the SEO company.
Dig into the history of the SEO company to find the past performance of the company.

https://www.firstrankseoservices.com/

greasemonkey-3.31.4 version desired. I would love to see it implemented for Iceape

If there is sincere to make a portion, in any case, you get that your record is closed. Exactly when you see it, it is very abnormal for you. Since it stops your all work. Along these lines, you need to endeavor to restore your record by putting all information. In case you regardless of everything get the same, contact the Cash app customer service number.

https://www.numbers-for-support.com/Cash-app

A very nasty bug I wasn’t able to find an answer to.
I compiled stuff (buildroot) using menuconfig, the menu display was fine in xfce4-terminal (See screenshot #1)
I restarted the config a few days later with the same command :

$ make menuconfig

and this time the display was messed up (See screenshot #2)

After investigation, I noticed a directory (filled with stuff) have been created in my home folder :

.terminfo

I don’t know why. But anyway, if I delete it, then the display is ok again.
I noticed that if I use good old xterm terminal, then the display is fine even if the .terminfo directory is present. (it uses “xterm” instead of xterm-256color)

But, with xfce4-terminal (and others, I tried with gnome-terminal, sakura..), the display is messed up if the .terminfo directory is present in my home folder.

I also noticed that if I run the command in a screen session, the issue is not present.

(I open xfce4-terminal)

$ screen
$ printenv TERM
screen.xterm-256color
$ make menuconfig (or htop, or other program using ncurses)

= display ok

but with default :

(I open xfce4-terminal)

$ printenv TERM
xterm-256color
make menuconfig (or htop, or other program using ncurses)

= display messed up if .terminfo directory is present

So I have no idea why this .terminfo directory is generated. What could trigger its generation ? Is that an issue with ncurses or something else ?

Thanks for your help

Description:

Gajim XMPP Client wont start after installing python2-gnupg.

Additional info:
* package version(s)

  community/python2-gnupg 0.4.0-2
  extra/gajim 0.16.8-1.hyperbola2

* config and/or log files etc.

/usr/lib/python2.7/site-packages/gajim/common/gajim.py

Steps to reproduce:

With Gajim working is not possible to assign an OpenPGP key because it needs a wrapper. Therefore python2-gnupgp package is needed. But after installing python2-gnupgp, Gajim doesn’t start. The following output is displayed from the console:

07/21/2018 18:00:41 (E) gajim.c.gnupg Unable to run gpg - it may not be available.
Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/gnupg.py", line 757, in __init__
  p = self._open_subprocess(["--version"])
File "/usr/lib/python2.7/site-packages/gnupg.py", line 832, in _open_subprocess
  startupinfo=si)
File "/usr/lib/python2.7/subprocess.py", line 394, in __init__
  errread, errwrite)
File "/usr/lib/python2.7/subprocess.py", line 1047, in _execute_child
  raise child_exception

OSError: [Errno 2] No such file or directory
Traceback (most recent call last):

File "gajim.py", line 513, in <module>
  interface.run()
File "/usr/lib/python2.7/site-packages/gajim/gui_interface.py", line 2704, in run
  self.roster = roster_window.RosterWindow()
File "/usr/lib/python2.7/site-packages/gajim/roster_window.py", line 6611, in __init__
  connection_zeroconf.ConnectionZeroconf(gajim.ZEROCONF_ACC_NAME)
File "/usr/lib/python2.7/site-packages/gajim/common/zeroconf/connection_zeroconf.py", line 68, in __init__
  CommonConnection.__init__(self, name)
File "/usr/lib/python2.7/site-packages/gajim/common/connection.py", line 150, in __init__
  self.gpg = gpg.GnuPG()
File "/usr/lib/python2.7/site-packages/gajim/common/gpg.py", line 37, in __init__
  gnupg.GPG.__init__(self, gpgbinary=gajim.GPG_BINARY, use_agent=use_agent)
File "/usr/lib/python2.7/site-packages/gnupg.py", line 761, in __init__
  raise OSError(msg)

OSError: Unable to run gpg - it may not be available.

After doing some search, the issue is that gajim.py is trying to call ‘gpg’ as ‘gpg1’.

# grep -n GPG_BINARY /usr/lib/python2.7/site-packages/gajim/common/gajim.py
162:GPG_BINARY = ‘gpg1’

By replacing ‘gpg’ instead of ‘gpg1’, Gajim will start normally with OpenPGP feature available.

Maybe a newer revision of python2-gnupg is required or maybe a small patch in the current package.

Hello Hyperbola!

GPA gives out the following errors upon opening the app.

First:

```
The GPGME library returned an unexpected
error at confdialog.c:1459. The error was:

    Unsupported protocol

This is either an installation problem or a bug in GPA.
GPA will now try to recover from this error.
```

Second:

```
Fatal Error in GPGME library
(invoked from file options.c, line 302):

    Unsupported protocol

The application will be terminated

What can I do to overcome these errors?
```
As this issue makes gpa app completely unusable, I have set this bug report’s severity as high.

I also request the admin to set priority to high due to it’s severity.

Thank you!

Regards,
RG.

Description:
Screen locking does not work in GNOME, either with keyboard shortcuts or from the menu, while using LightDM.

Additional info:
* According to this thread[1] this bug has been patched in Ubuntu. Please consider applying this patch.[2]

Steps to reproduce:
# pacman -S gnome lightdm lightdm-gtk-greeter
# rc-update add lightdm default
Reboot, log in to a GNOME session and attempt to lock screen.

[1] https://www.reddit.com/r/gnome/comments/9klvej/is_there_a_way_to_get_the_screen_to_lock_with/ [2] https://git.launchpad.net/~ubuntu-desktop/ubuntu/+source/gnome-shell/tree/debian/patches/ubuntu/lightdm-user-switching.patch

Some forum display errors:

1. preview button with the orange border.

1. Error message when logging in gray color making it difficult to read

The association issue can be awkward as the applications are related with the bank. Thusly, if you can’t send cash from Paypal to Cash App in light of the association issue then you can notice a couple of chronicles to find the screw up and sort it out. You have another decision to contact uphold for help.
https://www.cashapp-customerservice.com/blog/send-money-from-paypal-to-cash-app/

Epson printer offline is the most common issue users might face. This error basically occurs due to low network, USB cable not connected properly, etc. I am a technician and have received this complaint from various customers. However, I have been tackling such issues from the past many years. This [https://www.epsonprintersupportnumber.com/blog/how-to-bring-an-offline-epson-printer-online/ Epson printer offline problem]] can easily be solved with a few steps. In case, you are also facing this error then you can get in touch with me. Your issue can be resolved instantly. I have high experience in the technical field and have been sorting out the issues of printer customers on a daily basis. If you want the instant fixing solution you can anytime connect with me and convey your printer issue. There is no restricted time and you can contact me anytime, 24*7. All you need to do is share the correct details of your printer model. You will instantly receive the fixing solution.

Epson printer offline is the most common issue users might face. This error basically occurs due to low network, USB cable not connected properly, etc. I am a technician and have received this complaint from various customers. However, I have been tackling such issues from the past many years. This [https://www.epsonprintersupportnumber.com/blog/how-to-bring-an-offline-epson-printer-online | Epson printer offline problem]] can easily be solved with a few steps. In case, you are also facing this error then you can get in touch with me. Your issue can be resolved instantly. I have high experience in the technical field and have been sorting out the issues of printer customers on a daily basis. If you want the instant fixing solution you can anytime connect with me and convey your printer issue. There is no restricted time and you can contact me anytime, 24*7. All you need to do is share the correct details of your printer model. You will instantly receive the fixing solution.

I am into a critical accounting situation because I am encountering QuickBooks error 6147. This error code is taking place, while I am attempting to restore a company file backup. I am experiencing this accounting mistake, so I am unable to work on my accounting software. Really, I don’t have actual reasons for it, so I am trying to know about all the causes. I don’t have a clear explanation about this error code. I have taken expert’s help, but all solutions are not useful. Can anyone suggest me the permanent fixes for resolving QuickBooks error 6147?QuickBooks Error 6147

recommended fix, remove non-free software entries in menu and replace them with applications that actually exist.

this would be appreciated greatly, although I am in no hurry.

this package is under gpl3. It is the most reasonable chess game because it can be easy or hard depending on your preference.

It happened already with minetest and again with prosody: When trying to build own packages with makepkg there are patches downloaded from the Debian-project. But the given HTTP(S)-sources are no longer available, concrete example within prosody to be found: https://deb.debian.org/debian/pool/main/p/prosody/prosody_0.10.2-1~bpo9+1.debian.tar.xz (not available)

Please don’t rely on those external sources when creating PKGBUILD-files or just give users the possibility for a secure and granted download. Therefore I cannot build prosody on my own now!